IDL API Master Index
All Frameworks Object Hierarchy Indexes
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
IDL API Master Index
A
property in object HybridShapePlaneEquation
Gets A coefficient for plane equation.
ABND
property in object ErrorlogStatisticsSettingAtt
Returns or sets the state ot the abend severity level field.
ABQAnalysisCase
object
Represents an Abaqus analysis case (ABQAnalysisCase) object.
ABQAnalysisCases
object
ABQAnalysisModel
object
Represents the Abaqus analysis model object.
ABQAnalyticalRigidSurface
object
Represents an Abaqus Analytical rigid surface (ABQAnalyticalRigidSurface) object.
ABQBoundaryCondition
object
Represents the base interface for Abaqus boundary condition objects.
ABQBoundaryConditions
object
ABQClampBC
object
Represents an Abaqus clamp (ABQClamp) object.
ABQConcForceLoad_Type
enum
ABQConcentratedForce
object
Represents an Abaqus concentrated force object (ABQConcentratedForce).
ABQDisplacementBC
object
Represents an Abaqus displacement boundary condition (ABQDisplacementBC) object.
ABQExplicitDynamicsStep
object
Represents an Abaqus explicit dynamics step (ABQExplicitDynamicsStep) object.
ABQFastenedConnectionEnhancement
object
This interface has been deprecated.
ABQFastenedPair
object
Represents an Abaqus Fastened Pair (ABQFastenedPair) object.
ABQFields
object
ABQFilmCondition
object
Represents an Abaqus film condition (ABQFilmCondition) object.
ABQGasketProperty
object
ABQGeneralStaticStep
object
Represents an Abaqus general static step (ABQGeneralStaticStep) object.
ABQGlobalElementAssignment
object
Represents an Abaqus Global Element assignment (ABQGlobalElementAssignment) object.
ABQGravity
object
Represents an Abaqus gravity (ABQGravity) object.
ABQHeatTransferStep
object
Represents an Abaqus heat transfer step (ABQHeatTransferStep) object.
ABQInitialStep
object
Represents an Abaqus initial step (ABQInitialStep) object.
ABQInitialTemperature
object
Represents an Abaqus initial temperature object (ABQInitialTemperature).
ABQInteraction
object
Represents the base interface for Abaqus interaction objects.
ABQInteractions
object
ABQJob
object
Represents an Abaqus job (ABQJob) object.
ABQJobs
object
The collection of Abaqus (ABQJob) objects.
ABQLoad
object
Represents the base interface for all load objects.
ABQLoads
object
ABQMassScaling
object
Represents an Abaqus Mass Scaling entity.
ABQMassScalings
object
ABQMechConnBehavior
object
Represents an Abaqus mechanical connection behavior (ABQMechConnBehavior) object.
ABQPressure
object
Represents an Abaqus pressure (ABQPressure) object.
ABQPretensionProperty
object
Represents a pretension property (ABQPretensionProperty) object.
ABQProperties
object
ABQProperty
object
Represents the base interface for all Abaqus property objects.
ABQRestartOption
enum
ABQRestartReadOption
enum
ABQRestartReadStepSelOption
enum
ABQRigidBodyConstraint
object
Represents an Abaqus rigid body constraint (ABQRigidBodyConstraint) object.
ABQRigidCoupling
object
Represents an Abaqus rigid coupling (ABQRigidCoupling) object.
ABQSmoothCoupling
object
Represents an Abaqus smooth coupling (ABQSmoothCoupling) object.
ABQSmoothStepAmplitude
object
Represents a smooth step amplitude (ABQSmoothStepAmplitude) object.
ABQSpringConnectionProperty
object
Represents an Abaqus spring connection property (ABQSpring) object.
ABQStep
object
Represents a Abaqus analysis step (ABQStep) object.
ABQSteps
object
ABQSurfaceToSurfaceContact
object
Represents an Abaqus contact pair (ABQSurfaceToSurfaceContact) object.
ABQTabularAmplitude
object
Represents a tabular amplitude (ABQTabularAmplitude) object.
ABQTemperature
object
Represents an Abaqus temperature object (ABQTemperature).
ABQTemperatureHistory
object
Represents an Abaqus temperature history object (ABQTemperatureHistory).
ABQThermalConnBehavior
object
Represents an Abaqus thermal connection behavior (ABQThermalConnBehavior) object.
AMPPath
object
This interface provides the methods to handle the feature AMPPath which is a list of AMPTags.
AMPTag
object
This interface provides the methods to handle the feature AMPTag.
ASNavigationMode
property in object SimulationSettingAtt
Returns or sets the ASNavigationMode setting attribute value.
ASStepSize
property in object SimulationSettingAtt
Returns or sets the ASStepSize setting attribute value.
AbqMsFrequencyType
enum
Mass Scaling Frequency types.
AbqMsTargetMethod
enum
Mass Scaling Target Method.
AbsoluteAxis
property in object Sketch
Returns the 2D absolute axis of the sketch.
AccelColor
property in object DevAnalysisSettingAtt
Returns or sets the AccelColor parameter.
AccelLimit
property in object DevAnalysisSettingAtt
Returns or sets the AccelLimit parameter.
Acceleration
property in object MoveHomeAct
This property returns and sets the Acceleration percentage for the move activity.
Acceleration
property in object MoveJointsAct
This property returns and sets the Acceleration percentage for the activity.
AccelerationPercent
property in object MoveToPostureActivity
AccesslogStatisticsSettingAtt
object
Interface for Accesslog statistic Controler.
Accuracy
property in object Distance
Returns or sets the accuracy value for the computation.
AccuracyType
enum
Types of accuracy for the accuracy profile in robot controller.
AccuratePickingMode
property in object VisualizationSettingAtt
Returns the AccuratePickingMode parameter.
AccuratePickingWindowSize
property in object VisualizationSettingAtt
Returns the AccuratePickingWindowSize parameter.
AccurateType
method in object ExpertRuleBaseRuntime
Returns as a string the type of component.
AccurateType
method in object ExpertRuleBaseComponentRuntime
Returns as a string the type of component.
Actions
property in object FunctionalDescription
Get the Actions collection.
ActionsCount
property in object FunctActionsGroup
Get the count of actions referenced by the actions' group.
ActionsGroups
property in object FunctionalDescription
Get the ActionsGroups collection.
Activate
method in object Viewer
Activates the viewer in the window.
Activate
method in object Window
Activates a window.
Activate
method in object Document
Activates the document.
Activate
method in object Part
Unsuppresses an object for the update process.
Activate
method in object Constraint
Unsuppresses a constraint for the update process.
Activate
method in object DrawingView
Activates the drawing view.
Activate
method in object DrawingSheet
Activates the drawing sheet.
Activate
method in object Behavior
Activates a behavior.
Activate
method in object Layout2DView
Activates the Layout2D view.
Activate
method in object Layout2DSheet
Activates the Layout2D sheet.
Activate
method in object SchCompGraphic
To add a new image to an existing object.
Activate
method in object KnowledgeActivateObject
Activates the relation.
Activate
method in object ExpertRuleBaseComponentRuntime
Activates the RuleBaseComponent.
Activate2DMode
property in object Layout2DSettingAtt
Returns the Activate2DMode parameter.
ActivateDefaultShape
method in object Product
Activate default shape.
ActivateFrame
method in object DrawingText
Activates the text frame of the drawing text.
ActivateFrame
method in object DrawingTextProperties
Activates the text frame of the drawing text.
ActivateNext
method in object Window
Activates the window following the current active one in the window collection.
ActivatePoint
method in object ManufacturingPattern
Activates a point of a Manufacturing Pattern.
ActivatePosition
method in object Pattern
Allows user to activate an instance of the pattern.
ActivatePrevious
method in object Window
Activates the window preceding the current active one in the window collection.
ActivateShape
method in object Product
Activate one shape.
Activated
property in object KnowledgeActivateObject
Returns whether the relation is activated.
Activation
property in object SceneProductData
Returns / Set the scene product's activation state.
Activation
property in object GeneralStatisticsSettingAtt
Returns or sets the activation state of the statistics thematic.
ActivationMode
property in object CacheSettingAtt
Returns or sets the activation state of cache.
ActivationState
property in object PrintArea
Activates or deactivates the print area.
ActivationState
property in object MemoryWarningSettingAtt
Returns or sets the activation state of the memory warning mechanism.
ActivationState
property in object DisconnectionSettingAtt
Returns or sets the activation state of automatic disconnection.
ActivationStatus
property in object ABQLoad
Sets or returns the activation status.
ActivationStatus
property in object ABQBoundaryCondition
Sets or Returns a boolean indicating whether the boundary condition is activated.
Active
property in object SWKIKConstraint
Returns or sets the constraint activity.
Active
property in object ManufacturingActivity
Returns the activation state of the activity.
ActiveCamera
property in object RenderingShooting
Returns or sets the active camera for shooting.
ActiveDocument
property in object Application
Returns the active document.
ActiveEnvironment
property in object RenderingShooting
Returns or sets the active environment for shooting.
ActivePrinter
property in object Application
Returns or sets the active printer.
ActiveSheet
property in object DrawingRoot
Retrieves or sets the active sheet of the drawing.
ActiveSheet
property in object DrawingSheets
Returns the active drawing sheet of the drawing document.
ActiveSheet
property in object Layout2DRoot
Retrieves or sets the active sheet of the layout.
ActiveSheet
property in object Layout2DSheets
Returns the active Layout sheet of the Layout document.
ActiveStatus
property in object RenderingLight
Returns or sets the light active status.
ActiveStatus
property in object RenderingEnvironment
Returns or sets the environment active status.
ActiveStatus
property in object RenderingEnvironmentWall
Returns or sets the environment wall active status.
ActiveTask
object
Represents the Active task of the resource in conjunction with a particular activity.
ActiveView
property in object Capture
Retrieves the active view for the capture.
ActiveView
property in object AnnotationSet
Gets or Sets Annotation Set ActiveView.
ActiveView
property in object DrawingViews
Returns the active drawing view of the active drawing sheet.
ActiveView
property in object Layout2DViews
Returns the active Layout2D view of the active Layout2D sheet.
ActiveViewState
property in object Capture
Retrieves the Active View state, saved or Not.
ActiveViewer
property in object Window
Returns the active viewer in the window.
ActiveWindow
property in object Application
Returns the active window.
Activities
object
The collection of activities related to the current activity.
Activities
property in object ManufacturingProgram
Give the List of Activities linked to a Manufacturing Program.
Activity
object
The object that represents an activity.
Activity
property in object AnalysisMeshPart
Returns the activity of an meshpart.
AdaptiveCoeff
property in object RenderingMaterial
Returns or sets the adaptive coeffcient of a material.
AdaptivityManager
property in object AnalysisModel
Returns the AdaptivityManager defined on the analysis model.
Add
object
Represents the add, or union boolean operation.
Add
method in object Items
Add
method in object PartComps
Computes a new comparison between products.
Add
method in object Wrappings
Compute a wrapping on the selected products.
Add
method in object Selection
Creates a SelectedElement object which Value property is the given automation object, and adds it to the selection.
Add
method in object Documents
Creates a Document object and adds it to the documents collection.
Add
method in object FreeSpaces
Compute a free space around a selected product.
Add
method in object DMOOffsets
Creates a new Offset and adds it to the DMOOffsets collection.
Add
method in object Outputs
Add
method in object PPRProducts
Adds the specified Product to the current list of Products.
Add
method in object Bodies
Creates a new body and adds it to the Bodies collection.
Add
method in object Silhouettes
Creates a new Silhouette and adds it to the Silhouettes collection.
Add
method in object ABQJobs
Creates a new Abaqus job and adds it to the collection of Abaqus jobs.
Add
method in object Resources
Add
method in object LightSources
Adds a new light source to the LightSources collection.
Add
method in object ABQLoads
Creates a new Abaqus load and adds it to the collection of Abaqus loads.
Add
method in object SweptVolumes
Creates a new SweptVolume and adds it to the SweptVolumes collection.
Add
method in object ABQSteps
Creates a new Abaqus Step and adds it to the collection of Abaqus steps.
Add
method in object Sketches
Creates a new sketch and adds it to the sketch collection.
Add
method in object Activities
Add
method in object ABQFields
Creates a new Abaqus field and adds it to the collection of Abaqus fields.
Add
method in object Materials
Adds a new material to the material collection.
Add
method in object Sampleds
Creates a new Sampled object and adds it to the Sampleds collection.
Add
method in object Shuttles
Creates a new Shuttle and adds it to the Shuttles collection.
Add
method in object DMOThicknesses
Creates a new Silhouette and adds it to the DMOThicknesses collection.
Add
method in object Annotations
Add an Annotation.
Add
method in object List
Adds an item at the end of the list.
Add
method in object AxisSystems
Creates a new AxisSystem and adds it to the AxisSystems collection.
Add
method in object HybridBodies
Creates a new hybrid body and adds it to the HybridBodies collection.
Add
method in object FixTogethers
Creates a new FixTogether and adds it to the FixTogethers collection.
Add
method in object Groups
Creates an empty Group and adds it to the Groups Collection.
Add
method in object ABQProperties
Creates a new Abaqus Property and adds it to the collection of Abaqus Properties.
Add
method in object Joints
Create a new Joint and adds it to the Joints collection.
Add
method in object Hyperlinks
Adds a Hyperlink to the Hyperlinks collection.
Add
method in object DrawingViews
Creates a drawing view and adds it to the drawing view collection.
Add
method in object Dressups
Creates a new Dressup and adds it to the Dressups collection.
Add
method in object DrawingTexts
Creates a drawing text and adds it to the DrawingTexts collection.
Add
method in object ABQMassScalings
Add
method in object RenderingLights
Adds a new light to the lights collection.
Add
method in object ABQInteractions
Creates a new Abaqus interaction and adds it to the collection of Abaqus Interactions.
Add
method in object DrawingTables
Creates a drawing table and adds it to the DrawingTables collection.
Add
method in object DrawingSheets
Creates a drawing sheet and adds it to the DrawingSheets collection.
Add
method in object DrawingArrows
Creates a drawing arrow and adds it to the DrawingArrows collection.
Add
method in object Mechanisms
Creates a new Mechanism and adds it to the Mechanisms collection.
Add
method in object MaterialFamilies
Adds a new material family to the MaterialFamilies collection.
Add
method in object ABQAnalysisCases
Creates a new Abaqus analysis case and adds it to the collection of Abaqus analysis cases.
Add
method in object DrawingLeaders
Creates a drawing leader and adds it to the DrawingLeaders collection.
Add
method in object DrawingThreads
Creates a drawing thread and adds it to the DrawingThreads collection.
Add
method in object DrawingWeldings
Creates a drawing welding and adds it to the drawing weldings collection.
Add
method in object DrawingPictures
Inserts a drawing picture in the drawing view and adds it to the DrawingPictures collection.
Add
method in object AnnotatedViews
Creates an annotated view using the current viewpoint and adds it to the AnnotatedView collection.
Add
method in object FunctActionsGroup
Adds an action to the actions' group.
Add
method in object Clashes
Creates a Clash object which takes all products into account and adds it to the Clashes collection.
Add
method in object RenderingShootings
Adds a new shooting to the shootings collection.
Add
method in object AnalysisSets
Creates a new analysis set and adds it to the analysis sets collection.
Add
method in object Inertias
Creates an Inertia object from an object and adds it to the Inertias collection.
Add
method in object Sections
Creates a Section object which takes all products of the documents into account and adds it to the Sections collection.
Add
method in object Layout2DSheets
Creates a Layout sheet and adds it to the Layout2DSheets collection.
Add
method in object AnalysisCases
Creates a new case and adds it to the case collection.
Add
method in object Distances
Creates a Distance object which takes all products of the document into account and adds it to the Distances collection.
Add
method in object DrawingDimensions
Creates a drawing dimension and adds it to the DrawingDimensions collection.
Add
method in object DrawingComponents
Creates a drawing component instance and adds it to the DrawingComponents collection.
Add
method in object AnalysisImages
Creates a new image and adds it to the analysis image collection.
Add
method in object MechanismCommands
Creates a new MechanismCommand and adds it to the MechanismCommands collection.
Add
method in object ABQBoundaryConditions
Creates a new Abaqus boundary condition and adds it to the collection of Abaqus boundary conditions.
Add
method in object AnalysisEntities
Creates a new analysis entity and adds it to the analysis entities collection.
Add
method in object MfgActivities
This method adds the specified CATIAManufacturingActivity in the current list CATIAMfgActivities.
Add
method in object RenderingEnvironments
Adds a new environment to the environments collection.
Add
method in object AnalysisMeshParts
Creates a new meshpart and adds it to the meshpart collection.
Add
method in object MfgToolMotions
This method adds the specified CATIAManufacturingToolMotion in the current list CATIAMfgToolMotions.
Add
method in object OrderedGeometricalSets
Creates a new ordered geometrical set and adds it to the OrderedGeometricalSets collection.
Add
method in object Publications
Adds a publication object to the product and returns a pointer to the publication object.
Add
method in object AnalysisLocalEntities
Creates a new analysis local entity and adds it to the analysis entities collection.
Add
method in object AnalysisOutputEntities
Creates a new analysis entity and adds it to the analysis entities collection.
Add
method in object ManufacturingFeatures
Create and Add a Manufacturing Feature of a specified type to the Collection.
Add
method in object AnalysisMeshLocalSpecifications
Creates a new local specification and adds it to the local specification collection.
Add2
method in object DrawingDimensions
Creates a drawing dimension along a direction and adds it to the DrawingDimensions collection.
Add2DArrow
method in object Marker2Ds
Creates an arrow marker 2D and adds it to the marker 2D collection.
Add2DCircle
method in object Marker2Ds
Creates a circle marker 2D and adds it to the marker 2D collection.
Add2DFreeHand
method in object Marker2Ds
Creates a free hand drawing marker 2D and adds it to the marker 2D collection.
Add2DLine
method in object Marker2Ds
Creates a line marker 2D and adds it to the marker 2D collection.
Add2DPicture
method in object Marker2Ds
Creates a picture marker 2D and adds it to the marker 2D collection.
Add2DRectangle
method in object Marker2Ds
Creates a rectangle marker 2D and adds it to the marker 2D collection.
Add2DText
method in object Marker2Ds
Creates a text marker 2D and adds it to the marker 2D collection.
Add3DText
method in object Marker3Ds
Creates a text marker 3D and adds it to the marker 3D collection.
AddAccuracyProfile
method in object RobGenericController
Add a new Accuracy Profile into controller.
AddActiveLight
method in object RenderingShooting
Adds a new active light to the shooting active lights list.
AddAffectedComponent
method in object AssemblyFeature
Adds a component to the affected component list.
AddAlternateGraphic
method in object SchRouteAlternateGraphic
Add an alternate graphical primitive to a route.
AddArea
method in object ArrangementAreas
Creates a ArrangementArea and adds it to the collection.
AddAroundAny
method in object FreeSpaces
Compute a free space around any products.
AddAroundProducts
method in object FreeSpaces
AddAssemblyAdd
method in object AssemblyFeatures
Creates a new AssemblyBoolean object by adding a body to the assembly.
AddAssemblyHole
method in object AssemblyFeatures
Creates a new AssemblyHole object.
AddAssemblyPocket
method in object AssemblyFeatures
Creates a new AssemblyPocket object.
AddAssemblyRemove
method in object AssemblyFeatures
Creates a new AssemblyBoolean object by removing a body from the assembly.
AddAssemblySplit
method in object AssemblyFeatures
Creates a new AssemblySplit object.
AddAssociation
method in object DesignTable
Adds an association between a parameter iParameter and a column of the design table.
AddAttributeReal
method in object AMPTag
Function to add real attribute on the given AMPTag.
AddAttributeString
method in object AMPTag
Function to add string attribute on the given AMPTag.
AddAuxAttribute
method in object AMPTag
Function to add an auxilliary attribute to the given AMPTag.
AddAuxiliary
method in object Layout2DViews
Creates a section or section-cut or auxiliary View2DL from a given Layout View2DL.
AddBiEltCst
method in object Constraints
Creates a new constraint applying to two geometric elements and adds it to the Constraints collection.
AddBodyToHeal
method in object HybridShapeHealing
Adds the body to be healed to the list.
AddBound
method in object HybridShapeFill
Adds an boundary to the hybrid shape fill feature object.
AddBoundary
method in object ArrangementBoundaries
Creates an ArrangementBoundary and adds it to the collection.
AddBoundaryElement
method in object SchGRRZone
Add a boundary element to the zone.
AddByAssignmentType
method in object Items
AddByAssignmentType
method in object Resources
AddCSOIntoSelectionSet
method in object SelectionSets
Adds CSO's content in a Selection Set.
AddClearance
method in object ManufacturingOperation
Add a 'clearance to a plane' path to a Manufacturing Operation.
AddColumn
method in object DrawingTable
Adds a column before the indicated column.
AddCommand
method in object Mechanism
Adds a command in the mechanism, on a joint.
AddComponent
method in object Products
Creates a component and adds it to the Products collection.
AddComponentsFromFiles
method in object Products
Creates a component for each file.
AddConnector
method in object PspPhsyicalProduct
Returns the added connector on the object.
AddConnector
method in object SchCompConnector
Add a connector.
AddConstraint
method in object HybridShapeExtractMulti
AddConstraint
method in object MoveToPostureActivity
AddConstraint
method in object OptimizationConstraints
Adds a optimization constraint.
AddConstraintTolerant
method in object HybridShapeExtractMulti
Adds a constraint to the list of Extracted Elements.
AddCopyScene
method in object Scenes
Creates a scene from another and adds it to the Scenes collection.
AddCorrector
method in object ManufacturingTool
Adds a corrector to a Manufacturing tool.
AddCutPoints
method in object HybridShapeSweep
Sets two cut points on the master guide.
AddCuttingElem
method in object HybridShapeSplit
Adds a cutting feature.
AddDefExtFromCoordinates
method in object StrObjectFactory
Creates a member extremity definition object from coordinates and an offset value.
AddDefExtFromReference
method in object StrObjectFactory
Creates a member extremity definition object from an existing object in the model and an offset value.
AddDefExtOnMember
method in object StrObjectFactory
Creates a member extremity definition object from another member object, its side, a distance on it and an offset.
AddDetail
method in object DrawingSheets
Creates a detail drawing sheet and adds it to the DrawingSheets collection.
AddDetail
method in object Layout2DViews
Creates a detail view and adds it to the layout view collection.
AddDetail
method in object Layout2DSheets
Creates a detail Layout sheet 2DL and adds it to the LayoutSheets2DL collection.
AddDimMember
method in object StrObjectFactory
Creates a dimension member object from a point and a mathematical definition of a direction.
AddDimMemberOnPlane
method in object StrObjectFactory
Creates a dimension member object on a plane following a mathematical definition of a plane.
AddDimMemberPtPt
method in object StrObjectFactory
Creates a dimension member object from two given points.
AddDimMemberWithSupport
method in object StrObjectFactory
Creates a dimension member object using a support object.
AddDistanceAlongAlineMotion
method in object ManufacturingOperation
Add a path 'distance along a line' to a Manufacturing Operation.
AddDistanceAlongAlineMotionFeed
method in object ManufacturingOperation
Add a path 'distance along a line' with Feedrate info to a Manufacturing Operation.
AddDistanceAlongAxis
method in object ManufacturingOperation
Add a path 'distance along axis' to a Manufacturing Operation.
AddDistanceAlongAxisFeed
method in object ManufacturingOperation
Add a path 'distance along axis' with Feedrate info to a Manufacturing Operation.
AddDraftAngleDefinitionLocation
method in object HybridShapeSweepLine
Adds a draft angle location.
AddDropOffView
method in object SchDropOffView
Adds a drafting view to the schematics diagram.
AddDynamicConnector
method in object SchCompConnector
Add a dynamic connector.
AddEdgeToFillet
method in object VarRadEdgeFillet
Adds a new edge to the variable radius edge fillet.
AddEdgeToKeep
method in object EdgeFillet
Adds a new edge to keep by the filleting operation.
AddEdgeToKeepSharp
method in object HybridShapeHealing
Adds the edge to be kept sharp while healing, to the list.
AddEdgeToTear
method in object HybridShapeUnfold
Adds an edge to tear.
AddElement
method in object HybridShapeAssemble
Adds an element to the hybrid shape assemble feature object.
AddElementToChamfer
method in object Chamfer
Adds a new geometrical element to be chamfered.
AddElementToKeep
method in object HybridShapeTrim
Adds an element to specifications.
AddElementToKeep
method in object HybridShapeSplit
Adds an element to specifications.
AddElementToRemove
method in object HybridShapeTrim
Adds an element to specifications.
AddElementToRemove
method in object HybridShapeSplit
Adds an element to specifications.
AddElementsToFreeze
method in object HybridShapeHealing
Adds the body to be freezed while healing, to the list.
AddExistingCase
method in object AnalysisCases
Adds an existing analysis case to the analysis cases collection.
AddExistingCaseForReport
method in object AnalysisPostManager
Adds an existing analysis case to manager.
AddExistingSet
method in object AnalysisSets
Adds an existing analysis set to the analysis sets collection.
AddExplicit
method in object Group
Adds a product to the group.
AddExtension
method in object SchematicExtension
Adds a Schematic extension to an application object.
AddExternalComponent
method in object Products
Creates a component from the root product of another ProductDocument object.
AddFaceToDraft
method in object DraftDomain
Adds a face to those to be drafted.
AddFaceToKeep
method in object Trim
Adds a new face to be kept (if face is not divided by operation).
AddFaceToKeep2
method in object Trim
Adds a new face to be kept (if face is divided by operation).
AddFaceToRemove
method in object Trim
Adds a new face to be Removed (if face not divided by operation).
AddFaceToRemove
method in object Shell
Adds a new face to those to be removed by the shell process.
AddFaceToRemove2
method in object Trim
Adds a new face to be Removed (if face is divided by operation).
AddFaceToThicken
method in object Thickness
Adds a new face to be thickened.
AddFaceWithDifferentThickness
method in object Shell
Adds a new face to be thicken with different offset values.
AddFaceWithDifferentThickness
method in object Thickness
Adds a new face to thicken with a different offset value.
AddFact
method in object ExpertRuleBaseRuntime
Adds new fact to the rule base resolution.
AddFeatureToLocatePositions
method in object UserPattern
Adds a new feature to locate instances.
AddFeatureToLocatePositions
method in object UserRepartition
Adds a new feature to locate instances.
AddFile
method in object SendToService
Adds a file to the list of the files 'to be copied'.
AddFillPoints
method in object HybridShapeSweep
Sets two fill points on the master guide.
AddFixTogether
method in object FixTogether
Add a fixTogether to a FixTogether.
AddFormalParameter
method in object Law
Creates a formal parameter for the law.
AddFreeParameter
method in object FreeParameters
Adds a free parameter.
AddFrom3DPlane
method in object Layout2DViews
Creates a viewFrom3D View2DL with the given 3Dplane as its view plane at the given position in the given Sheet2DL.
AddFromFile
method in object FreeSpaces
Compute a free space from a file.
AddFromFile
method in object Tracks
Creates a track in the collection, from information from an external file.
AddFromSel
method in object Sampleds
Creates a new Sampled from the selection and adds it to the Sampleds collection.
AddFromSel
method in object Shuttles
Creates a new Shuttle from the selection and adds it to the Shuttles collection.
AddFromSel
method in object Groups
Creates a Group containing all products in the selection and adds it to the Groups Collection.
AddFromSel
method in object Clashes
Creates a Clash object which takes all products in the selection into account and adds it to the Clashes collection.
AddFromSel
method in object Sections
Creates a Section object which takes all products in the selection into account and adds it to the Sections collection.
AddFromSel
method in object Distances
Creates a Distance object which takes all products in the selection into account and adds it to the Distances collection.
AddFromSweptAble
method in object SweptVolumes
Creates a new SweptVolume and adds it to the SweptVolumes collection.
AddFromViewpoint
method in object AnnotatedViews
Creates an annotated view using a given viewpoint and adds it to the AnnotatedView collection.
AddFromXML
method in object ClashResults
Creates a ClashResult object from a XML file and adds it to the ClashResults collection.
AddFrozenCurveSegment
method in object HybridShapeCurveSmooth
Adds a frozen curve to the hybrid shape curve smooth feature object.
AddFrozenPoint
method in object HybridShapeCurveSmooth
Adds a frozen points to the hybrid shape curve smooth feature object.
AddGapConductionTable
method in object ABQThermalConnBehavior
Adds a gap-conductance table using three lists containing gap, conductance, and temperature values.
AddGotoHorizontal
method in object ManufacturingOperation
Add a path 'goto horizontal' to a Manufacturing Operation.
AddGotoPoint
method in object ManufacturingProgram
Add a Goto Point Operation to a Manufacturing Program.
AddGotoPointfromCoordinates
method in object ManufacturingProgram
Add a Goto Point Operation to a Manufacturing Program.
AddGraphicalPrimitive
method in object SchCntrGraphic
Add a graphical primitive to a connector.
AddGraphicalPrimitive
method in object SchRouteGraphic
Add a graphical primitive to a route.
AddGraphicalRepresentation
method in object SchCompGraphic
Add a graphical representation to a component.
AddGraphicalRepresentation
method in object SchZoneGraphic
Add a graphical representation to a zone.
AddGuide
method in object HybridShapeLoft
Adds a guide curve to the lofted surface.
AddGuideWithTangent
method in object HybridShapeLoft
Adds a guide curve and a tangent surface to the lofted surface.
AddImposedVertex
method in object VarRadEdgeFillet
Adds a new control couple.
AddInAProduct
method in object AnnotationSets
Add a set in the product.
AddInflatingFromFile
method in object FreeSpaces
Compute an inflating free space from a file.
AddInstance
method in object InstanceFactory
Creates a new instance of a shape or hybrid shape.
AddInternalFlow
method in object SchCompFlow
Add an internal flow to a component.
AddInternalFlowSpecifyGRR
method in object SchCompFlow
Add an internal flow to a component.
AddInterrupt
method in object DrawingDimExtLine
Add an interrupt to an extension line.
AddInterruption
method in object DrawingArrow
Add an interruption to an arrow.
AddInterruption
method in object DrawingLeader
Add an interruption to an leader.
AddItemReservation
method in object ArrangementItemReservations
Creates an ArrangementItemReservation and adds it to the collection.
AddJoint
method in object Mechanism
Adds a joint in the mechanism.
AddLeader
method in object Annotation
Add a leader.
AddLibrary
method in object ProcessDocument
Adds a new library to the current Process document.
AddLink
method in object DrawingViewGenerativeLinks
Adds a link to the drawing view.
AddMachinableGeometry
method in object ManufacturingMachinableArea
Adds a machinable geometry to the list.
AddMasterShapeRepresentation
method in object Product
Adds the master shape representation to the product.
AddMeToBuffer
method in object ManufacturingOutputGenerator
Management of specific buffer for aligned points elimination.
AddMember
method in object PspGroup
Adds a member to the group.
AddMember
method in object StrObjectFactory
Creates a member object.
AddMember
method in object SchComponentGroup
Add a member to the component group.
AddMemberFromDir
method in object StrObjectFactory
Creates a member object using a direction object as a line or a plane.
AddMemberFromMathDir
method in object StrObjectFactory
Creates a member object using a mathematical definition of the direction.
AddMemberFromMathPlane
method in object StrObjectFactory
Creates a member object from a mathematical definition of a plane.
AddMemberOnSupport
method in object StrObjectFactory
Creates a member object on a given support.
AddMemberOnSupportWithRef
method in object StrObjectFactory
Creates a member object on a given support object and a surface used to define the orientation of the section.
AddMonoEltCst
method in object Constraints
Creates a new constraint applying to a single geometric element and adds it to the Constraints collection.
AddMotionGoToAPoint
method in object ManufacturingOperation
Add a path 'goto a point' to a Manufacturing Operation.
AddMotionGoToAPointFeed
method in object ManufacturingOperation
Add a path 'goto a point' with Feedrate info to a Manufacturing Operation.
AddMotionProfile
method in object RobGenericController
Add a new Motion Profile into controller.
AddMotionToAPlane
method in object ManufacturingOperation
Add a path 'goto a plane with axial or perpendicular move' to a Manufacturing Operation.
AddNew3DCorner
method in object HybridShapeFactory
Creates a new 3D Corner within the current body.
AddNew3DCurveOffset
method in object HybridShapeFactory
Creates a 3D Curve Offset.
AddNewAdd
method in object ShapeFactory
Creates and returns a new add operation within the current body.
AddNewAffinity
method in object HybridShapeFactory
Creates a new Affinity within the current body.
AddNewAffinity2
method in object ShapeFactory
Creates and returns a Affinity feature.
AddNewAssemble
method in object ShapeFactory
Creates and returns a new assembly operation within the current body.
AddNewAutoDraft
method in object ShapeFactory
Creates and returns a new solid autodraft.
AddNewAutoFillet
method in object ShapeFactory
Creates and returns a new solid autofillet.
AddNewAxisLine
method in object HybridShapeFactory
Creates a new AxisLine within the current body.
AddNewAxisToAxis
method in object HybridShapeFactory
Creates a new axis to axis transformation within the current body.
AddNewAxisToAxis2
method in object ShapeFactory
Creates and returns an AxisToAxis transformation feature.
AddNewBlend
method in object ShapeFactory
Creates and returns a new Blend feature.
AddNewBlend
method in object HybridShapeFactory
Creates a new blend surface within the current body.
AddNewBoundary
method in object HybridShapeFactory
Creates a new Boundary within the current body.
AddNewBoundaryOfSurface
method in object HybridShapeFactory
Creates a Boundary within the current body.
AddNewBump
method in object HybridShapeFactory
Creates a new Bump within the current body.
AddNewChamfer
method in object ShapeFactory
Creates and returns a new chamfer within the current body.
AddNewCircPattern
method in object ShapeFactory
Creates and returns a new circular pattern within the current body.
AddNewCircPatternofList
method in object ShapeFactory
V5R8 Only: Creates and returns a new circular pattern within the current body using a list of shapes.
AddNewCircle2PointsRad
method in object HybridShapeFactory
Creates a new Circle passing through 2 points with a radius within the current body.
AddNewCircle3Points
method in object HybridShapeFactory
Creates a new circle passing through 3 points within the current body.
AddNewCircleBitangentPoint
method in object HybridShapeFactory
Creates a new circle tangent to 2 curves and passing through one point within the current body.
AddNewCircleBitangentRadius
method in object HybridShapeFactory
Creates a new circle tangent to 2 curves and with a radius within the current body.
AddNewCircleCenterAxis
method in object HybridShapeFactory
Creates a circle from point and axis.
AddNewCircleCenterAxisWithAngles
method in object HybridShapeFactory
Creates a circle from point and axis.
AddNewCircleCenterTangent
method in object HybridShapeFactory
Creates a new circle with given center element and tangent curve.
AddNewCircleCtrPt
method in object HybridShapeFactory
Creates a new whole circle defined by its center, a passing point within the current body.
AddNewCircleCtrPtWithAngles
method in object HybridShapeFactory
Creates a new circle defined by its center, a passing point and angles within the current body.
AddNewCircleCtrRad
method in object HybridShapeFactory
Creates a new whole circle defined by its center and a radius within the current body.
AddNewCircleCtrRadWithAngles
method in object HybridShapeFactory
Creates a new circle defined by its center, a radius and angles within the current body.
AddNewCircleDatum
method in object HybridShapeFactory
Creates a new datum of circle within the current body.
AddNewCircleTritangent
method in object HybridShapeFactory
Creates a new tritangent circle within the current body.
AddNewCloseSurface
method in object ShapeFactory
Creates and returns a new CloseSurface feature.
AddNewCombine
method in object HybridShapeFactory
Creates a new Combine within the current body.
AddNewComponent
method in object Products
Creates a component from the root product of a new ProductDocument object.
AddNewConic
method in object HybridShapeFactory
Creates a new conic within the current body.
AddNewConicalReflectLineWithType
method in object HybridShapeFactory
Creates a new conical ReflectLine within the current body.
AddNewConnect
method in object HybridShapeFactory
Creates a new Connect within the current body.
AddNewCorner
method in object HybridShapeFactory
Creates a new Corner within the current body.
AddNewCurveDatum
method in object HybridShapeFactory
Creates a new datum of curve within the current body.
AddNewCurvePar
method in object HybridShapeFactory
Creates a new CurvePar within the current body.
AddNewCurveSmooth
method in object HybridShapeFactory
Creates a new CurveSmooth within the current body.
AddNewCylinder
method in object HybridShapeFactory
Creates a new Cylinder within the current body.
AddNewDatums
method in object HybridShapeFactory
Creates datums from a multi-domain result feature, one datum is created by object domain.
AddNewDevelop
method in object HybridShapeFactory
Creates a new Develop within the current body.
AddNewDirection
method in object HybridShapeFactory
Creates a new direction specified by an element within the current body.
AddNewDirectionByCoord
method in object HybridShapeFactory
Creates a new Direction specifed by coordinates within the current body.
AddNewDraft
method in object ShapeFactory
Creates and returns a new draft within the current body.
AddNewEdgeFilletWithConstantRadius
method in object ShapeFactory
AddNewEdgeFilletWithVaryingRadius
method in object ShapeFactory
AddNewEmptyRotate
method in object HybridShapeFactory
Creates a new empty Rotate within the current body.
AddNewEmptyTranslate
method in object HybridShapeFactory
Creates a new empty Translate within the current body.
AddNewExtract
method in object HybridShapeFactory
Creates a new Extract within the current body.
AddNewExtractMulti
method in object HybridShapeFactory
Creates a new Multiple Extract within the current body.
AddNewExtrapolLength
method in object HybridShapeFactory
Creates a new Extrapol (specified by length) within the current body.
AddNewExtrapolUntil
method in object HybridShapeFactory
Creates a new Extrapol (until an element) within the current body.
AddNewExtremum
method in object HybridShapeFactory
Creates a new Extremum within the current body.
AddNewExtremumPolar
method in object HybridShapeFactory
Creates a new Extremum Polar within the current body.
AddNewExtrude
method in object HybridShapeFactory
Creates a new extrude within the current body.
AddNewFaceFillet
method in object ShapeFactory
AddNewFill
method in object HybridShapeFactory
Creates a new Fill within the current body.
AddNewFilletBiTangent
method in object HybridShapeFactory
Creates a new a sphere bitangent fillet between two skins.
AddNewFilletTriTangent
method in object HybridShapeFactory
Creates a new a tritangent fillet between three skins.
AddNewGSDCircPattern
method in object ShapeFactory
AddNewGSDRectPattern
method in object ShapeFactory
AddNewGroove
method in object ShapeFactory
Creates and returns a new groove within the current body.
AddNewGrooveFromRef
method in object ShapeFactory
Creates and returns a new groove within the current body.
AddNewHealing
method in object HybridShapeFactory
Creates a new healing within the current body.
AddNewHelix
method in object HybridShapeFactory
Creates a new Helix within the current body.
AddNewHole
method in object ShapeFactory
Creates and returns a new hole within the current shape.
AddNewHoleFromPoint
method in object ShapeFactory
Creates and returns a new hole within the current shape.
AddNewHoleFromRefPoint
method in object ShapeFactory
Creates and returns a new hole within the current shape.
AddNewHoleFromSketch
method in object ShapeFactory
Creates and returns a new hole within the current shape.
AddNewHoleWith2Constraints
method in object ShapeFactory
Creates and returns a new hole within the current shape.
AddNewHoleWithConstraint
method in object ShapeFactory
Creates and returns a new hole within the current shape.
AddNewHybridScaling
method in object HybridShapeFactory
Creates a new scaling within the current body.
AddNewHybridSplit
method in object HybridShapeFactory
Creates a new Split within the current body.
AddNewHybridTrim
method in object HybridShapeFactory
Creates a new Trim within the current body by cutting and joining two elements.
AddNewIntegratedLaw
method in object HybridShapeFactory
Creates Integrated Law.
AddNewIntersect
method in object ShapeFactory
Creates and returns a new intersect operation within the current body.
AddNewIntersection
method in object HybridShapeFactory
Creates a new Intersection within the current body.
AddNewInverse
method in object HybridShapeFactory
Creates a new Inverse within the current body.
AddNewJoin
method in object HybridShapeFactory
Creates a new Join within the current body.
AddNewLawDistProj
method in object HybridShapeFactory
Creates a new law within the current body.
AddNewLineAngle
method in object HybridShapeFactory
Creates a new angle line within the current body.
AddNewLineBiTangent
method in object HybridShapeFactory
Creates a new bitangent line within the current body.
AddNewLineBisecting
method in object HybridShapeFactory
Creates a new bisecting line within the current body.
AddNewLineBisectingOnSupport
method in object HybridShapeFactory
Creates a new bisecting line on a support within the current body.
AddNewLineBisectingOnSupportWithPoint
method in object HybridShapeFactory
Creates a new bisecting line on a support with a atarting point within the current body.
AddNewLineBisectingWithPoint
method in object HybridShapeFactory
Creates a new bisecting line with a starting point within the current body.
AddNewLineDatum
method in object HybridShapeFactory
Creates a new datum of line within the current body.
AddNewLineNormal
method in object HybridShapeFactory
Creates a new normal line within the current body.
AddNewLinePtDir
method in object HybridShapeFactory
Creates a new point-direction line within the current body.
AddNewLinePtDirOnSupport
method in object HybridShapeFactory
Creates a new point-direction line within the current body.
AddNewLinePtPt
method in object HybridShapeFactory
Creates a new point-point line within the current body.
AddNewLinePtPtExtended
method in object HybridShapeFactory
Creates a new point-point line with extensions within the current body.
AddNewLinePtPtOnSupport
method in object HybridShapeFactory
Creates a new point-point line with support within the current body.
AddNewLinePtPtOnSupportExtended
method in object HybridShapeFactory
Creates a new point-point line with extensions and with support within the current body.
AddNewLineTangency
method in object HybridShapeFactory
Creates a new tangent line within the current body.
AddNewLineTangencyOnSupport
method in object HybridShapeFactory
Creates a new tangent line within the current body.
AddNewLoft
method in object ShapeFactory
Creates and returns a new Loft feature.
AddNewLoft
method in object HybridShapeFactory
Creates a new Loft within the current body.
AddNewMirror
method in object ShapeFactory
Creates and returns a new mirror within the current body.
AddNewNear
method in object HybridShapeFactory
Creates a new Near within the current body.
AddNewOffset
method in object HybridShapeFactory
Creates a new offset within the current body.
AddNewPad
method in object ShapeFactory
Creates and returns a new pad within the current body.
AddNewPadFromRef
method in object ShapeFactory
Creates and returns a new pad within the current body.
AddNewPlane1Curve
method in object HybridShapeFactory
Creates a new plane passing through one planar curve within the current body.
AddNewPlane1Line1Pt
method in object HybridShapeFactory
Creates a new plane passing through 1 line and 1 point within the current body.
AddNewPlane2Lines
method in object HybridShapeFactory
Creates a new plane passing through 2 lines within the current body.
AddNewPlane3Points
method in object HybridShapeFactory
Creates a new plane passing through 3 points within the current body.
AddNewPlaneAngle
method in object HybridShapeFactory
Creates a new angle plane within the current body.
AddNewPlaneDatum
method in object HybridShapeFactory
Creates a new datum of plane within the current body.
AddNewPlaneEquation
method in object HybridShapeFactory
Creates a new equation plane within the current body.
AddNewPlaneMean
method in object HybridShapeFactory
Creates a new mean through points plane within the current body.
AddNewPlaneNormal
method in object HybridShapeFactory
Creates a new normal plane within the current body.
AddNewPlaneOffset
method in object HybridShapeFactory
Creates a new offset plane within the current body.
AddNewPlaneOffsetPt
method in object HybridShapeFactory
Creates a new offset trough point plane within the current body.
AddNewPlaneTangent
method in object HybridShapeFactory
Creates a new tangent plane within the current body.
AddNewPocket
method in object ShapeFactory
Creates and returns a new pocket within the current shape.
AddNewPocketFromRef
method in object ShapeFactory
Creates and returns a new pocket within the current shape.
AddNewPointBetween
method in object HybridShapeFactory
Creates a new PointBetween within the current body.
AddNewPointCenter
method in object HybridShapeFactory
Creates a new circle center point within the current body.
AddNewPointCoord
method in object HybridShapeFactory
Creates a new point defined by its cartesian coordinates within the current body.
AddNewPointCoordWithReference
method in object HybridShapeFactory
Creates a new point defined its the cartesian coordinates regarding a reference point.
AddNewPointDatum
method in object HybridShapeFactory
Creates a new datum of point within the current body.
AddNewPointOnCurveAlongDirection
method in object HybridShapeFactory
Creates a new point on a curve with a deafult origin point and from a distance along direction.
AddNewPointOnCurveFromDistance
method in object HybridShapeFactory
Creates a new point on a curve from a distance to an extremity within the current body.
AddNewPointOnCurveFromPercent
method in object HybridShapeFactory
Creates a new point on a curve from a ratio of distance to an extremity within the current body.
AddNewPointOnCurveWithReferenceAlongDirection
method in object HybridShapeFactory
Creates a new point on a curve with a reference point and from a distance along direction.
AddNewPointOnCurveWithReferenceFromDistance
method in object HybridShapeFactory
Creates a new point on a curve with a reference point and from a distance within the current body.
AddNewPointOnCurveWithReferenceFromPercent
method in object HybridShapeFactory
Creates a new point on a curve with a reference point and from a ratio of distance within the current body.
AddNewPointOnPlane
method in object HybridShapeFactory
Creates a new point on a plane within the current body.
AddNewPointOnPlaneWithReference
method in object HybridShapeFactory
Creates a new point on a plane with a reference point within the current body.
AddNewPointOnSurface
method in object HybridShapeFactory
Creates a new point on a surface within the current body.
AddNewPointOnSurfaceWithReference
method in object HybridShapeFactory
Creates a new point on a surface with a reference point within the current body.
AddNewPointTangent
method in object HybridShapeFactory
Creates a new tangent to curve point within the current body.
AddNewPolyline
method in object HybridShapeFactory
Creates a new Polyline within the current body.
AddNewPositionTransfo
method in object HybridShapeFactory
Creates a new PositionTransfo within the current body.
AddNewProduct
method in object Products
Creates a Product reference object.
AddNewProject
method in object HybridShapeFactory
Creates a new Project within the current body.
AddNewRRS2ControllerIdentifier
method in object RRSSettingAtt
Adds new controller identifier into the list represented by the "RRS2ControllerIdentifiers" parameter.
AddNewRectPattern
method in object ShapeFactory
Creates and returns a new rectangular pattern within the current body.
AddNewRectPatternofList
method in object ShapeFactory
V5R8 Only: Creates and returns a new rectangular pattern within the current body using a list of shapes.
AddNewReflectLine
method in object HybridShapeFactory
AddNewReflectLineWithType
method in object HybridShapeFactory
Creates a new ReflectLine within the current body.
AddNewRemove
method in object ShapeFactory
Creates and returns a new remove operation within the current body.
AddNewRemoveFace
method in object ShapeFactory
Creates and returns a new RemoveFace feature.
AddNewRemovedBlend
method in object ShapeFactory
Creates and returns a new Removed Blend feature.
AddNewRemovedLoft
method in object ShapeFactory
Creates and returns a new Removed Loft feature.
AddNewReplaceFace
method in object ShapeFactory
Creates and returns a new Align/ ReplaceFace feature.
AddNewRevol
method in object HybridShapeFactory
Creates a new revolution within the current body.
AddNewRib
method in object ShapeFactory
Creates and returns a new rib within the current body.
AddNewRibFromRef
method in object ShapeFactory
Creates and returns a new rib within the current body.
AddNewRotate
method in object HybridShapeFactory
Creates a new Rotate within the current body.
AddNewRow
method in object DesignTable
Adds a row in the design table source file.
AddNewScaling
method in object ShapeFactory
Creates and returns a new scaling within the current body.
AddNewScene
method in object Scenes
Creates a scene from a product and adds it to the Scenes collection.
AddNewSection
method in object HybridShapeFactory
Creates a new section.
AddNewSewSurface
method in object ShapeFactory
Creates and returns a new sewing operation within the current body.
AddNewShaft
method in object ShapeFactory
Creates and returns a new shaft within the current body.
AddNewShaftFromRef
method in object ShapeFactory
Creates and returns a new shaft within the current body.
AddNewShell
method in object ShapeFactory
Creates and returns a new shell within the current body.
AddNewSlot
method in object ShapeFactory
Creates and returns a new slot within the current shape.
AddNewSlotFromRef
method in object ShapeFactory
Creates and returns a new slot within the current shape.
AddNewSolidCombine
method in object ShapeFactory
Creates and returns a new SolidCombine feature.
AddNewSolidEdgeFilletWithConstantRadius
method in object ShapeFactory
Creates and returns a new solid edge fillet with a constant radius.
AddNewSolidEdgeFilletWithVaryingRadius
method in object ShapeFactory
Creates and returns a new solid edge fillet with a varying radius.
AddNewSolidFaceFillet
method in object ShapeFactory
Creates and returns a new solid face-to-face fillet.
AddNewSolidTritangentFillet
method in object ShapeFactory
Creates and returns a new solid tritangent fillet within the current body.
AddNewSphere
method in object HybridShapeFactory
Creates a new Sphere within the current body.
AddNewSpine
method in object HybridShapeFactory
Creates a new spine within the current body.
AddNewSpiral
method in object HybridShapeFactory
Creates a new Spiral within the current body.
AddNewSpline
method in object HybridShapeFactory
Creates a new Spline within the current body.
AddNewSplit
method in object ShapeFactory
Creates and returns a new split operation within the current body.
AddNewStiffener
method in object ShapeFactory
Creates and returns a new stiffener within the current body.
AddNewStiffenerFromRef
method in object ShapeFactory
Creates and returns a new stiffener within the current body.
AddNewSurfaceDatum
method in object HybridShapeFactory
Creates a new datum of surface within the current body.
AddNewSurfaceEdgeFilletWithConstantRadius
method in object ShapeFactory
Creates and returns a new surface edge fillet with a constant radius.
AddNewSurfaceEdgeFilletWithVaryingRadius
method in object ShapeFactory
Creates and returns a new surface edge fillet with a varying radius.
AddNewSurfaceFaceFillet
method in object ShapeFactory
Creates and returns a new surface face-to-face fillet.
AddNewSurfaceTritangentFillet
method in object ShapeFactory
Creates and returns a new surface tritangent fillet within the current body.
AddNewSurfacicAutoFillet
method in object ShapeFactory
Creates and returns a new Surfacic autofillet.
AddNewSurfacicCircPattern
method in object ShapeFactory
Creates and returns a new gsd circular pattern within the current body.
AddNewSurfacicRectPattern
method in object ShapeFactory
Creates and returns a new GSD rectangular pattern within the current body.
AddNewSurfacicUserPattern
method in object ShapeFactory
Creates and returns a new GSD user pattern within the current body.
AddNewSweepCircle
method in object HybridShapeFactory
Creates a new SweepCircle within the current body.
AddNewSweepConic
method in object HybridShapeFactory
Creates a new SweepConic within the current body.
AddNewSweepExplicit
method in object HybridShapeFactory
Creates a new SweepExplicit within the current body.
AddNewSweepLine
method in object HybridShapeFactory
Creates a new SweepLine within the current body.
AddNewSymmetry
method in object HybridShapeFactory
Creates a new Symmetry within the current body.
AddNewThickSurface
method in object ShapeFactory
Creates and returns a new ThickSurface feature.
AddNewThickness
method in object ShapeFactory
Creates and returns a new thickness within the current body.
AddNewThreadWithOutRef
method in object ShapeFactory
Creates and returns a new thread\tap within the current body.
AddNewThreadWithRef
method in object ShapeFactory
Creates and returns a new thread\tap within the current body.
AddNewTransfer
method in object HybridShapeFactory
Creates a new Transfer within the current body.
AddNewTranslate
method in object HybridShapeFactory
Creates a new Translate within the current body.
AddNewTrim
method in object ShapeFactory
Creates and returns a new Trim operation within the current body.
AddNewTritangentFillet
method in object ShapeFactory
AddNewUnfold
method in object HybridShapeFactory
Creates a new Unfold within the current body.
AddNewUserPattern
method in object ShapeFactory
Creates and returns a new user pattern within the current body.
AddNewUserPatternofList
method in object ShapeFactory
V5R8 Only: Creates and returns a new user pattern within the current body using a list of shapes.
AddNewVolumeAdd
method in object ShapeFactory
Creates and returns a Volumic Add feature.
AddNewVolumeCloseSurface
method in object ShapeFactory
Creates and returns a new VolumeCloseSurface feature.
AddNewVolumeDatum
method in object HybridShapeFactory
Creates a new datum of volume within the current body.
AddNewVolumeIntersect
method in object ShapeFactory
Creates and returns a Volumic Intersect feature.
AddNewVolumeRemove
method in object ShapeFactory
Creates and returns a Volumic Remove feature.
AddNewVolumeSewSurface
method in object ShapeFactory
Creates and returns a new volume sewing operation within the current OGS/GS.
AddNewVolumeShell
method in object ShapeFactory
Creates and returns a Volumic Shell feature.
AddNewVolumeThickSurface
method in object ShapeFactory
Creates and returns a new VolumeThickSurface feature.
AddNewVolumeThickness
method in object ShapeFactory
Creates and returns a volume new thickness within the current GS or OGS.
AddNewVolumeTrim
method in object ShapeFactory
Creates and returns a new Volume Trim operation within the GS/OGS.
AddNewVolumicDraft
method in object ShapeFactory
Creates and returns a new volume draft within the current body.
AddNewWrapCurve
method in object HybridShapeFactory
Creates a new Wrap Curve Surface within the current body.
AddNewWrapSurface
method in object HybridShapeFactory
Creates a new Wrap Surface within the current body.
AddNomenclatureTree
method in object ArrWorkbench
This method allows the user to add a nomenclature tree if the get_ArrNomenclatureTree returns a Return code of E_FAIL.
AddObjFrameProfile
method in object RobGenericController
Add a new ObjFrame Profile into controller.
AddObject
method in object Marker3D
Adds a link to an object.
AddObjectToFillet
method in object ConstRadEdgeFillet
Adds a new sub-element to be filleted.
AddObjectToGenerate
method in object ManufacturingGeneratorData
Adds an object to the output stream.
AddObjectToGenerateFromBuffer
method in object ManufacturingGeneratorData
Adds an object to the output stream from the buffer.
AddObjectToGenerateWithBuffer
method in object ManufacturingGeneratorData
Adds an object to the output stream within the buffer.
AddObjectToGenerateWithOutBuffer
method in object ManufacturingGeneratorData
Adds an object to the output stream without the buffer.
AddObjectToModalValues
method in object ManufacturingGeneratorData
Adds an object to the modal values manager only.
AddOffset
method in object StrMemberExtremity
Adds an offset on the extremity.
AddOffsetFromVectors
method in object DMOOffsets
Creates a new Offset from a set of vectors, and adds it to the DMOOffsets collection.
AddOperation
method in object ManufacturingPrecedences
Adds a new precedence in the collection of precedences.
AddOperation
method in object ManufacturingCopyTransformation
Add a Manufacturing Operation to a Copy Transformation.
AddPPInstruction
method in object ManufacturingProgram
Add a PP Instruction to a Manufacturing Program.
AddPPWords
method in object ManufacturingOperation
Add a path 'PP Words' to a Manufacturing Operation.
AddPart
method in object MfgAssembly
Assignes a part (Product, Resource or other MA/MK) to the Manufacturing Assembly.
AddPartSurface
method in object ManufacturingPattern
Adds a Part Surface to the Manufacturing Pattern.
AddPathway
method in object ArrangementPathways
Creates an ArrangementItemReservation and adds it to the collection.
AddPickedMfgAssembly
method in object PickActivity
AddPickedProduct
method in object PickActivity
AddPlacedMfgAssembly
method in object PlaceActivity
AddPlacedProduct
method in object PlaceActivity
AddPlate
method in object StrObjectFactory
Creates a plate from a contour defined by coordinates.
AddPoint
method in object HybridShapeSpline
Add a new point .
AddPoint
method in object DrawingArrow
Add a point to an arrow.
AddPoint
method in object DrawingLeader
Add a point to an leader.
AddPoint
method in object HybridShapePlaneMean
Adds a point to the mean plane.
AddPointWithConstraintExplicit
method in object HybridShapeSpline
Add a new point with explicit tangency and curvature.
AddPointWithConstraintFromCurve
method in object HybridShapeSpline
Add a new point with tangency/curvature from a curve.
AddPointedGeometry
method in object ManufacturingMachinableGeometry
Adds a geometry to the pointed geometry list.
AddPointedGeometryNotify
method in object ManufacturingMachinableGeometry
Adds a geometry to the pointed geometry list (manage notification).
AddPointedGeometryWithNoDuplicatedCheck
method in object ManufacturingMachinableGeometry
Adds a geometry to the pointed geometry list with no check on already referenced geometry.
AddPointedGeometryWithNoDuplicatedCheckNotify
method in object ManufacturingMachinableGeometry
Adds a geometry to the pointed geometry list with no check on an already referenced geometry.
AddPoints
method in object SchRoute
Add a list of point to a route.
AddPoints
method in object SchGRRRoute
Add a list of point to a route.
AddPosition
method in object ManufacturingPattern
Adds a position to the Manufacturing Pattern.
AddPressureOverclosureTable
method in object ABQMechConnBehavior
Adds a list of tabular pressure overclosure in the connection behavior.
AddPrimary
method in object Layout2DViews
Creates a Layout view and adds it to the Layout view collection.
AddPrinterDirectory
method in object PrintersSettingAtt
Add a printer file directory to printer directories list and define its state.
AddPrinterGroup
method in object PrintersSettingAtt
Add a printer group and define the printers included in this group.
AddProduct
method in object FixTogether
Add a product to a FixTogether.
AddProductMotion
method in object Replay
Adds a product to be taken into account in the Replay object.
AddProductSceneFull
method in object ProductScenes
Creates a new FULL scene from a set of products and adds it to the ProductScenes collection.
AddProductScenePartial
method in object ProductScenes
Creates a new DELTA scene from a set of products and adds it to the ProductScenes collection.
AddRectangle
method in object ArrangementRectangles
Creates an ArrangementRectangle and adds it to the collection.
AddRectangularContour
method in object ArrangementContours
Creates a Rectangular Contour by adding a ArrangementRectangle to the collection.
AddRectangularEndPlate
method in object StrObjectFactory
Creates a rectangular end plate on an extremity of a given member.
AddReference
method in object UserSurface
AddReferenceInAProductCtx
method in object UserSurface
AddRelated
method in object Layout2DViews
Creates a projection or isometric Layout View2DL from a given View2DL.
AddRemoveFace
method in object ReplaceFace
Sets the face to be removed.
AddRootOfFacts
method in object ExpertRuleBaseRuntime
Adds a new root of facts to the rule base.
AddRotabl
method in object ManufacturingProgram
Add a Table Head Rotation instruction to a Manufacturing Program.
AddRow
method in object DrawingTable
Adds a row before the indicated row.
AddRun
method in object ArrangementRuns
Creates an ArrangementRun and adds it to the collection.
AddSample
method in object Replay
AddSection
method in object HybridShapeSpine
Adds a section or a plane to the spine curve.
AddSection
method in object StrObjectFactory
Creates a section object from part document.
AddSectionFromCatalog
method in object StrObjectFactory
Creates a section object from part document.
AddSectionToLoft
method in object HybridShapeLoft
Retrieves a loft section.
AddShapeRepresentation
method in object Product
Adds a representation to the product with a specific behavior.
AddSolution
method in object AnalysisCase
Creates a Solution set defined by its type in the Case.
AddSplitFromFile
method in object FreeSpaces
Compute a split free space from a file.
AddSplitPlane
method in object ReplaceFace
Sets the replacing element.
AddSubElement
method in object HybridShapeAssemble
Adds a sub element to the hybrid shape assemble feature object.
AddSupport
method in object AnalysisImport
AddSupport for loads import if needed.
AddSupportAtBound
method in object HybridShapeFill
Inserts the support at specified boundary in the Fill.
AddSupportForBody
method in object ABQMassScaling
Adds the specified body as a support.
AddSupportFromAnalysisEntity
method in object ABQFastenedPair
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromBody
method in object ABQRigidBodyConstraint
Creates a new support for the body and adds it to the description of the Analysis Entity.
AddSupportFromConstraint
method in object ABQFastenedPair
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromConstraint
method in object AnalysisEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromConstraint
method in object AnalysisLocalEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromConstraint
method in object ABQSurfaceToSurfaceContact
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPart
method in object AnalysisEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromPart
method in object ABQRigidBodyConstraint
Creates a new support for the part and adds it to the description of the Analysis Entity.
AddSupportFromProduct
method in object ABQLoad
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromProduct
method in object ABQMassScaling
Adds the specified product reference as a support.
AddSupportFromProduct
method in object ABQTemperature
This adds the support from a product to the Field.
AddSupportFromProduct
method in object BasicComponent
Creates a new support and add it to the description of the basic component.
AddSupportFromProduct
method in object AnalysisEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromProduct
method in object ABQBoundaryCondition
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromProduct
method in object ABQPretensionProperty
Creates a new support and adds it to the description of the bolt pretension property.
AddSupportFromProduct
method in object AnalysisLocalEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromPublication
method in object ABQLoad
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPublication
method in object ABQMassScaling
Adds a support from the publication.
AddSupportFromPublication
method in object ABQTemperature
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPublication
method in object ABQRigidCoupling
Adds a support to the coupling.
AddSupportFromPublication
method in object ABQSmoothCoupling
Adds a support to the coupling.
AddSupportFromPublication
method in object BasicComponent
Creates a new support and add it to the description of the Basic Component.
AddSupportFromPublication
method in object AnalysisEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromPublication
method in object ABQBoundaryCondition
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPublication
method in object AnalysisMeshPart
Creates a new support and add it to the support description of the mesh part.
AddSupportFromPublication
method in object ABQPretensionProperty
Creates a new support and adds it to the description of the bolt pretension property.
AddSupportFromPublication
method in object ABQRigidBodyConstraint
Adds a support to the Rigid body constraint.
AddSupportFromPublication
method in object AnalysisLocalEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromPublication
method in object ABQAnalyticalRigidSurface
Adds a support to the Analytical rigid surface.
AddSupportFromPublication
method in object AnalysisMeshLocalSpecification
Defines the support of the local specification.
AddSupportFromReference
method in object ABQLoad
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromReference
method in object ABQRigidCoupling
Adds a support to the coupling.
AddSupportFromReference
method in object ABQSmoothCoupling
AddSupportFromReference - adds a support to the coupling.
AddSupportFromReference
method in object BasicComponent
Creates a new support and add it to the description of the basic component.
AddSupportFromReference
method in object AnalysisEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromReference
method in object ABQBoundaryCondition
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromReference
method in object AnalysisMeshPart
Creates a new support and add it to the support description of the mesh part.
AddSupportFromReference
method in object ABQPretensionProperty
Creates a new support and adds it to the description of the bolt pretension property.
AddSupportFromReference
method in object AnalysisLocalEntity
Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromReference
method in object ABQAnalyticalRigidSurface
Creates a new support for the Reference and adds it to the description of the Analysis Entity.
AddSupportFromReference
method in object ABQSurfaceToSurfaceContact
Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromReference
method in object ABQSpringConnectionProperty
Adds support to the spring connection property.
AddSupportFromReference
method in object AnalysisMeshLocalSpecification
Defines the support of the local specification.
AddTempDependentFilmCoeffTable
method in object ABQFilmCondition
Adds a list of temperature dependent film coefficients if the film condition is temperature dependent.
AddTimeAmplitudeTable
method in object ABQTabularAmplitude
Adds a list of time and amplitude for the specified time span STEP_TIME or TOTAL_TIME The number of values in both of the parameters must match.
AddTimeAmplitudeTable
method in object ABQSmoothStepAmplitude
Adds a list of time and amplitude for the specified time span STEP_TIME or TOTAL_TIME The number of values in both of the parameters must match.
AddToolChange
method in object ManufacturingProgram
Add a Tool Change Operation to a Manufacturing Program.
AddToolChangeMultipleFeeds
method in object ManufacturingProgram
Add a Tool Change Operation to a Manufacturing Program.
AddToolProfile
method in object RobGenericController
Add a new Tool Profile into controller.
AddTriEltCst
method in object Constraints
Creates a new constraint applying to three geometric elements and adds it to the Constraints collection.
AddTrickyFace
method in object HybridShapeOffset
Adds a tricky face object on the object.
AddURL
method in object Noa
Sets an URL.
AddURL
method in object FlagNote
Sets an URL.
AddUrl
method in object Hyperlink
Adds a url to an Hyperlink.
AddUserNomenclature
method in object ArrNomenclatures
Creates a new UserNomenclature and adds it to this collection.
AddUserSurface
method in object UserSurface
AddedMaterialPercentage
property in object PartComps
Returns the added material percentage.
AddedMaterialVolume
property in object PartComps
Returns the added material volume.
AddtoLogicalDataAttrList
method in object PlugMapViewSettingAtt
Method to add a parameter to the LogicalDataAttrList.
AddtoTerminationAttrList
method in object PlugMapViewSettingAtt
Method to add a parameter to the TerminationAttrList.
AdjustMethod
property in object ABQSurfaceToSurfaceContact
Sets or returns the method type in a contact pair.
AdjustMethod_Type
enum
Adjust Method types.
AdjustSlaveNode
property in object ABQFastenedPair
Sets or returns the adjust slave node flag.
AdjustSlaveNode
property in object ABQFastenedConnectionEnhancement
Sets or returns the adjust slave node flag.
AdjustToleranceVal
property in object ABQSurfaceToSurfaceContact
ets or returns the tolerance value of the contact pair.
AdvancedLaw
property in object HybridShapeIntegratedLaw
Gets or sets the external law.
AdvancedView
method in object NavigatorWorkbench
Applies the annotated view to the current viewer.
AffectedComponentsCount
method in object AssemblyFeature
Returns the affected component list count.
Affiche_Attribut
property in object MigrBatchSettingAtt
Retrieves or sets the state of the "Display Report Attribute" setting parameter.
Affinity
object
Represents the hybrid shape Affinity feature object.
AlgorithmType
property in object Optimization
Returns or sets the algorithm type.
AlignType
property in object PspPartConnector
Returns the alignment type for this connector.
AlignedWithReferenceView
method in object DrawingView
Activates the alignment with the reference view.
AlignedWithReferenceView
method in object Layout2DView
Activates the alignment with the reference view.
AllAround
property in object DrawingLeader
Returns or sets the status of all around.
AllChecksReport
property in object ReportGenerationSheetSettingAtt
Returns or sets the AllChecksReport parameter.
AllDatumsSimple
property in object ReferenceFrame
Retrieves all datums simple used in Reference Frame.
AllJointsSpeed
property in object HtsJointSpeedSettingsAtt
Returns or sets the JointSpeed parameter.
AllLeaves
method in object Groups
Returns a group which contains all the terminal nodes of the current root product.
AllParameters
property in object ParameterSet
Returns all parameters under this set of parameter.
AllPartsLoaded
method in object Fastener
AllResourceFilter
property in object VerifTabSettingAtt
AllZBufferElementMode
property in object VisualizationSettingAtt
Returns the AllZBufferElementMode parameter.
AllowDistortions
property in object FTAInfraSettingAtt
Returns or sets the Allow Distortions setting parameter value.
AllowSeparation
property in object ABQMechConnBehavior
Sets or returns the seperation status for the hard contact pressure overclosure.
AlphabeticOrder
property in object FTASettingAtt
Returns or sets the AlphabeticOrder setting parameter value.
AlsoDeleteExclusiveParents
property in object PartInfrastructureSettingAtt
Returns or sets the "AlsoDeleteExclusiveParents" parameter.
AlternateView
property in object Export3DXmlSettingAtt
Ambient
property in object RenderingLight
Returns or sets the light ambient intensity of a light.
AmbientActivation
property in object VisualizationSettingAtt
Returns the AmbientActivation parameter.
AmbientCoefficient
property in object RenderingMaterial
Returns or sets the ambient coefficient of a material.
AmbientFactor
property in object RenderingShooting
Returns or sets amount of ambient used for indirect illumination (final gathering or global illumination).
Amplitude
property in object ABQLoad
Sets or returns the amplitude, given the name of the amplitude.
Amplitude
property in object ABQTemperatureHistory
Sets or returns the amplitude of the temperature field.
AnEmptyAnnotationsList
property in object AnnotationSet
Retrieves an empty Annotations'Collection.
Analysis
property in object AnalysisDocument
Returns the root analysis object from the current analysis document.
AnalysisAdaptivityManager
object
The interface to access a CATIAAnalysisAdaptivityManager.
AnalysisCacheMode
property in object AnalysisGeneralSettingAtt
Tells if Product Structure Cache Mode will be handled.
AnalysisCase
object
Represent the analysis case object.
AnalysisCases
object
The collection of analysis case making an Analysis.
AnalysisCases
property in object AnalysisModel
Returns the collection of analysis cases defined on the analysis model.
AnalysisDisplayMode
property in object FTASettingAtt
Returns the AnalysisDisplayMode parameter.
AnalysisDocument
object
Represents the document object for analysis.
AnalysisEntities
object
The collection of analysis entities.
AnalysisEntities
property in object AnalysisSet
Returns the analysis entities collection associated to a set.
AnalysisEntity
object
Represent the analysis entity object.
AnalysisExport
object
AnalysisGeneralSettingAtt
object
Interface to handle the Analysis & Simulation "GeneralSetting".
AnalysisGlobalSensor
object
Represent the analysis global sensor.
AnalysisImage
object
Represents the analysis image object.
AnalysisImages
object
The collection of analysis images.
AnalysisImages
property in object AnalysisSet
Returns the analysis images collection associated with an analysis set.
AnalysisImages
property in object AnalysisImage
Returns the analysis images collection associated with an analysis image.
AnalysisImages
property in object AnalysisEntity
Returns the analysis images collection associated with an analysis entity.
AnalysisImages
property in object AnalysisLocalEntity
Returns the analysis images collection associated with an analysis entity.
AnalysisImport
object
AnalysisLevel
property in object AnalysisSettingAtt
Returns or sets the AnalysisLevel parameter.
AnalysisLinkedDocuments
object
The collection of Documents linked by Analysis.
AnalysisLoadMode
property in object AnalysisGeneralSettingAtt
Retrieves if pointed document will be loaded.
AnalysisLocalEntities
object
The collection of local analysis entities.
AnalysisLocalEntities
property in object AnalysisEntity
Returns the analysis local entity collection associated with an analysis entity.
AnalysisLocalEntity
object
Represent the analysis local entity object.
AnalysisLocalSensor
object
Represent the analysis local sensor.
AnalysisManager
object
Represents the root object inside an analysis document.
AnalysisMaterial
object
Represents an AnalysisMaterial object.
AnalysisMaterial
property in object Material
Returns the analysis material object from the current material.
AnalysisMeshLocalSpecification
object
The interface to access a CATIAAnalysisMeshLocalSpecification.
AnalysisMeshLocalSpecifications
object
The interface to access a AnalysisMeshLocalSpecifications.
AnalysisMeshLocalSpecifications
property in object AnalysisMeshPart
Returns the local specification collection from the meshpart analysis.
AnalysisMeshManager
object
The interface to access a CATIAAnalysisMeshManager.
AnalysisMeshPart
object
The interface to access a CATIAAnalysisMeshPart.
AnalysisMeshParts
object
The collection of analysis meshparts.
AnalysisMeshParts
property in object AnalysisMeshManager
Returns the meshpart collection from the current analysis mesh manager.
AnalysisModel
object
Represent the analysis model object.
AnalysisModels
object
The collection of analysis models making an analysis document.
AnalysisModels
property in object AnalysisManager
Returns the analysis model collection from the current analysis manager.
AnalysisNamingAuto
property in object AnalysisGeneralSettingAtt
Tells if Automatic naming will be activated.
AnalysisOutputEntities
object
The collection of analysis entities results of a set.
AnalysisOutputEntities
property in object AnalysisSet
Returns the analysis entities collection associated to a set.
AnalysisPostManager
object
Interface to define the Post Processing Manager.
AnalysisPostProSettingAtt
object
Interface to handle the Analysis & Simulation "PostProcessingSetting".
AnalysisReportingSettingAtt
object
Interface to handle the Analysis & Simulation "ReportingSetting".
AnalysisSensor
object
Represent the analysis sensor.
AnalysisSet
object
Represent the analysis set object.
AnalysisSets
object
The collection of analysis sets.
AnalysisSets
property in object AnalysisSet
Returns the analysis sets collection associated with an analysis set.
AnalysisSets
property in object AnalysisCase
Returns the analysis sets collection associated to the analysis case.
AnalysisSets
property in object AnalysisModel
Returns the analysis sets collection associated with a analysis model.
AnalysisSets
property in object AnalysisManager
Returns the analysis sets collection associated with an analysis manager.
AnalysisSettingAtt
object
Interface to handle parameters of DELMIA Analysis Tools Options Tab page Role : This interface is implemented by a component which represents the controller of Analysis Tools Options parameter settings.
AnalysisSupports
object
The collection of analysis case making an Analysis.
AnalysisSupports
property in object AnalysisEntity
Returns the list of Analysis Supports.
AnalysisSupports
property in object AnalysisLocalEntity
Returns the list of Analysis Supports (Selection of geometrical or mesh entities) which define the area on which the analysis is applied on.
Analyze
object
Represents the analysis object associated with a product.
Analyze
property in object Product
Returns the Analyze object associated to the current product.
AnchorDirReverse
property in object Sweep
Returns the Sweep AnchorDirReverse flag (for Sweep Move Profile only).
AnchorMode
property in object Hole
Returns the hole anchor mode.
AnchorMode
property in object AssemblyHole
Returns or sets the hole anchor mode.
AnchorPoint
property in object UserPattern
Returns the anchor point of the user pattern.
AnchorPoint
property in object DrawingTable
Returns or sets the anchor point of a drawing table.
AnchorPoint
property in object DrawingLeader
Returns or sets anchor point.
AnchorPoint
property in object DrawingTextProperties
Returns or sets the anchor point of the drawing text.
AnchorPosition
property in object DrawingText
Returns or sets the anchor position of the drawing text.
Angle
property in object Rotate
Returns the rotation angle.
Angle
property in object Chamfer
Returns the chamfer angle.
Angle
object
Represents the angle parameter.
Angle
property in object StrMember
Returns or set the orientation of the section on the support object.
Angle
property in object DrawingView
Returns or sets the angle of the drawing view.
Angle
property in object RenderingLight
Returns or sets the light angle of a spot light.
Angle
property in object DrawingText
Returns or sets the angle of the drawing text.
Angle
property in object HybridShapeRotate
Returns the rotation angle.
Angle
property in object DrawingTable
Returns or sets the angle orientation of a drawing table.
Angle
property in object DrawingWelding
Returns or sets the angle of the drawing text.
Angle
property in object HybridShapeLineAngle
Role : Get the angle to the reference curve of the line.
Angle
property in object Layout2DView
Returns or sets the angle of the Layout2D view.
Angle
property in object DrawingComponent
Returns or sets the angle of the drawing component instance.
Angle
property in object HybridShapePlaneAngle
Returns the rotation angle.
Angle
property in object Measurable
Returns the Angle of a circle or cone.
Angle
property in object HybridShapeReflectLine
Returns or sets the angle used to create the reflectline.
Angle
property in object HybridShapeExtremumPolar
returns the resulting angle of extremum.
Angle
property in object IgesSettingAtt
Returns or sets the Angle setting parameter value.
AngleCriteria
property in object SWKIKConstraint
Returns or sets the angle criteria that will be used to evaluate success or failure of the constraint resolution.
AngleCut
property in object StrMemberExtremity
Returns the angle cut for a member extremity.
AngleLaw
property in object HybridShapeSweepLine
Returns or sets the angular law.
AngleLaw
property in object HybridShapeSweepExplicit
Returns or sets the angle law feature associated to the reference surface.
AngleLawInversion
property in object HybridShapeSweepLine
Returns or sets whether the angular law has to be inverted.
AngleLawInversion
property in object HybridShapeSweepExplicit
Returns or sets the angle law inversion information.
AngleLawType
property in object HybridShapeSweepLine
Returns or sets the angular law type.
AngleLawType
property in object HybridShapeSweepExplicit
Returns or sets the angle law type associated to the reference surface.
AngleLimit
property in object Shuttle
Returns/Stores the angle limit attribute.
AngleLimit
property in object FittingSettingAtt
AngleMaxTolerance
property in object ToleranceSheetSettingAtt
Returns or sets the AngleMaxTolerance parameter.
AngleMinTolerance
property in object ToleranceSheetSettingAtt
Returns or sets the AngleMinTolerance parameter.
AngleParameter
property in object StrMember
Returns the parameter used to define the orientation of the section on the support object.
AngleSector
property in object Constraint
Returns or sets the constraint angle (or angular) sector.
AngleStep
property in object ManipSettingAtt
AngleToTarget
property in object SWKIKConstraint
Returns the angle (in radians) from the constraint end effector to the target.
AngleValidation
property in object Shuttle
Returns/Stores the angle validation attribute.
AngleValue
property in object Rotate
Returns or sets the rotation angle value.
AngleValue
property in object HybridShapeRotate
Returns or sets the rotation angle value.
AngulaireGeneralTolClass
property in object FTASettingAtt
Returns or sets the Dimension general class parameter.
AngularDirectionRow
property in object CircPattern
Returns the position of the shape to be copied along the angular direction.
AngularRepartition
object
Represents the angular repartition.
AngularRepartition
property in object CircPattern
Returns the angular repartition.
AngularSpacing
property in object AngularRepartition
Returns the angle between two consecutive copies of a shape along the repartition crown.
AngularThreshold
property in object HybridShapeExtract
Returns or sets the AngularThreshold.
AngularThresholdActivity
property in object HybridShapeExtract
Returns or sets the AngularThresholdActivity.
Animation
property in object Export3DXmlSettingAtt
Returns or sets the animation activation flag.
AnlAccelLimit
property in object AnalysisSettingAtt
Returns or sets the AnlAccelLimit parameter.
AnlCautionZone
property in object AnalysisSettingAtt
Returns or sets the AnlCautionZone parameter.
AnlIOAnalysis
property in object AnalysisSettingAtt
Returns or sets the AnlIOAnalysis parameter.
AnlIntDist
property in object AnalysisSettingAtt
Returns or sets the AnlIntDist parameter.
AnlIntf
property in object AnalysisSettingAtt
Returns or sets the AnlIntf parameter.
AnlLinAccelLimit
property in object AnalysisSettingAtt
Returns or sets the AnlLinAccelLimit parameter.
AnlLinSpeedLimit
property in object AnalysisSettingAtt
Returns or sets the AnlLinSpeedLimit parameter.
AnlMeasure
property in object AnalysisSettingAtt
Returns or sets the AnlMeasure parameter.
AnlRotAccelLimit
property in object AnalysisSettingAtt
Returns or sets the AnlRotAccelLimit parameter.
AnlRotSpeedLimit
property in object AnalysisSettingAtt
Returns or sets the AnlRotSpeedLimit parameter.
AnlTravelLimit
property in object AnalysisSettingAtt
Returns or sets the AnlTravelLimit parameter.
AnlVelocityLimit
property in object AnalysisSettingAtt
Returns or sets the AnlVelocityLimit parameter.
AnnotDimInvalid
property in object FTASettingAtt
Returns the AnnotDimInvalid parameter.
AnnotDimOnDeletedGeom
property in object FTASettingAtt
Returns the AnnotDimOnDeletedGeom parameter.
AnnotDimOnUnloadedGeom
property in object FTASettingAtt
Returns the AnnotDimOnUnloadedGeom parameter.
AnnotOnZeroZSetting
property in object FTASettingAtt
Returns the AnnotOnZeroZSetting parameter.
AnnotatedView
object
Represents an annotated view.
AnnotatedView
property in object Export3DXmlSettingAtt
AnnotatedViews
object
A collection of AnnotatedView objects.
AnnotatedViews
property in object Clash
Returns the AnnotatedViews collection of the clash.
AnnotatedViews
property in object Section
Returns the AnnotatedViews collection of the section.
AnnotatedViews
property in object Distance
Returns the AnnotatedViews collection of the distance.
AnnotatedViews
property in object NavigatorWorkbench
Returns the AnnotatedViews collection.
Annotation
object
Interface for the Technological Product Specification (TPS) objects.
Annotation3D
property in object Export3DXmlSettingAtt
Returns or sets the 3D annotation activation flag.
Annotation3DMode
property in object MultiCADSettingAtt
Returns or sets the Annotation 3D mode R18sp3 on env.
AnnotationFactory
object
Interface for the TPS Factory.
AnnotationFactory
property in object AnnotationSet
Obtain the factory to create annotations.
AnnotationSet
object
Interface for the TPS Set of objects.
AnnotationSets
object
AnnotationSets
property in object Part
Returns the collection object containing the annotation sets.
Annotations
object
Interface for collection of TPS objects CATIAAnnotation.
Annotations
property in object Capture
Retrieves the TPSs that are visualy managed by this Capture.
Annotations
property in object AnnotationSet
Retrieves the TPS components of the set.
Anthro
property in object SWKManikin
Returns the anthropometry of the current manikin.
AntiAliasingMode
property in object VisualizationSettingAtt
Returns the AntiAliasingMode parameter.
AntiAliasingOffset
property in object VisualizationSettingAtt
Returns the AntiAliasingOffset parameter.
AntialiasingContrast
property in object RenderingShooting
Returns or sets the antialiasing contrast threshold value.
AntialiasingMaxSample
property in object RenderingShooting
Returns or sets the antialiasing maximum sample number for image computation.
AntialiasingMinSample
property in object RenderingShooting
Returns or sets the antialiasing minimum sample number for image computation.
AnyObject
object
Represents the base object for all other objects except collection and reference objects.
AppAddConnector
method in object SchAppConnection
Add a connector.
AppAddConnector
method in object SchAppConnectable
Add a connector.
AppAddImage
method in object SchAppMultiImageMaster
Add an image for this master object.
AppAddZoneMember
method in object SchAppZone
Add an application connectable object to the zone as member.
AppBreak
method in object SchAppRoute
Break the application route into 2 routes.
AppChooseGapPriority
method in object SchAppGapPriority
Identify which of 2 intersecting routes should be gapped.
AppCleanUpWhenApplicationEnds
method in object SchAppEnvironment
Initialize environment when schematic application ends.
AppConnect
method in object SchAppConnector
Connect to an input connector.
AppConnectBranch
method in object SchAppConnector
Connect to an input connector for Branch.
AppCreateCompRef
method in object SchAppObjectFactory
Create an Application Component reference.
AppCreateCompRef
method in object SchAppObjectFactory2
Create an Application Component reference.
AppCreateComponentInst
method in object SchAppComponent
Create a component instance.
AppCreateConnection
method in object SchAppObjectFactory
Create an Application Connection object.
AppCreateConnection
method in object SchAppObjectFactory2
Create an Application Connection object.
AppCreateGroup
method in object SchAppObjectFactory
Create an Application Group object.
AppCreateGroup
method in object SchAppObjectFactory2
Create an Application Group object.
AppCreateLocalReference
method in object SchAppRoute
Make a local route reference in another document by copying an existing one in the current document.
AppCreateLocalReference
method in object SchAppComponent
Create Local Reference object.
AppCreateRoute
method in object SchAppObjectFactory
Create an Application Route object.
AppCreateRoute
method in object SchAppObjectFactory2
Create an Application Route object.
AppCreateRouteFromRef
method in object SchAppObjectFactory
Create an Application Route object with a specific reference.
AppCreateRouteFromRef
method in object SchAppObjectFactory2
Create an Application Route object with a specific reference.
AppCreateRouteWithInfo
method in object SchAppObjectFactory2
Create an Application Route object with application information.
AppCreateZone
method in object SchAppObjectFactory
Create an Application Zone object.
AppCreateZone
method in object SchAppObjectFactory2
Create an Application Zone object.
AppDisconnect
method in object SchAppConnector
Disconnect from an input connector.
AppGetApplicationData
method in object SchAppCntrData
Get application data.
AppGetAssociatedConnectable
method in object SchAppConnector
Find the application object that owns this connector.
AppGetComponentBaseClass
method in object SchAppClass
Provide the application class names for the base component classes.
AppGetConnectorColorByType
method in object SchAppCntrColor
Specify the connector color of this connector type.
AppGetDefaultGRRName
method in object SchAppComponent
Get the default graphical representation names of an application component.
AppGetDeleteWarning
method in object SchAppDeleteCheck
Returns the caption and message text to be used as a warning for the delete operation.
AppGetFlowCapability
method in object SchAppCntrFlow
Query the application Flow Capability property of this connector.
AppGetFlowReality
method in object SchAppCntrFlow
Query the application Flow Reality property of this connector.
AppGetGroupBaseClass
method in object SchAppClass
Provide the application class name for Schematic Group class.
AppGetLink
method in object SchAppCntrDocLink
AppGetLinkedDocs
method in object SchAppCntrDocLink
Get a list of linked connectors, their documents' names, uuids, and 'open in session' statuses, and a publication name of the connectors.
AppGetMasterDocument
method in object SchAppMultiImage
Get the document where the master of this image object resides.
AppGetMasterObject
method in object SchAppMultiImage
Get the master object of this image.
AppGetReferenceName
method in object SchAppConnectable
Get the reference name of a connectable.
AppGetRouteBaseClass
method in object SchAppClass
Provide the application class name for Schematic Route class.
AppGetScalingPriority
method in object SchAppScalingRule
Get a priority number to indicate the adjustment (moving) priority of this object during scaling.
AppGetZoneBaseClass
method in object SchAppClass
Provide the application class name for Schematic Zone class.
AppInit
method in object SchAppModelInit
Initialize application model.
AppInitWhenApplicationStarts
method in object SchAppEnvironment
Initialize environment when schematic application starts.
AppIsCntrConnected
method in object SchAppConnector
Query whether the connector has been connected.
AppIsLinkable
method in object SchAppCntrDocLink
Query whether this connector and input connector can be linked.
AppIsOKToCreateImage
method in object SchAppMultiImageMaster
Check if OK to create an image of this master object.
AppIsTargetOKForInsert
method in object SchAppCompatible
Query whether a component (source) is compatible to be inserted into this route.
AppIsTargetOKForPlace
method in object SchAppCompatible
Query whether a component (source) is compatible to be connected to "this" object (the target, which can be a route or a component).
AppIsTargetOKForRoute
method in object SchAppCompatible
Query whether a route of the input class type can be connected to "this" object (the target, which can be a route or a component).
AppIsUpToDate
method in object SchAppMultiImage
Check if the image object is up-to-date.
AppLink
method in object SchAppCntrDocLink
Create an external link to another connector.
AppLinkInit
method in object SchAppCntrDocLink
Publish this connector to make it available for linking.
AppListCompatibleTypes
method in object SchAppConnector
Find all the class types of connector that are compatible with this connector for connections.
AppListConnectables
method in object SchAppConnection
Find all the application object connected to this connection through their connectors.
AppListConnectables
method in object SchAppConnectable
Find all the application objects connected to this object through their connectors.
AppListConnections
method in object SchAppConnector
Find all the connections that include this connector.
AppListConnectors
method in object SchAppConnection
Find all the connectors included in this connection.
AppListConnectors
method in object SchAppConnectable
Find all the connectors of this application object.
AppListGRRNames
method in object SchAppComponent
Find all the valid graphical representation names of an application component.
AppListImages
method in object SchAppMultiImageMaster
List the images of this master object.
AppListNames
method in object SchAppCntrName
List connector names allowed.
AppListPotentialData
method in object SchAppCntrData
Get a list valid potential application data that can be set.
AppListValidCntrTypes
method in object SchAppConnectable
List the valid application connector types allowed to be created.
AppListValidRouteTypes
method in object SchAppClass
List the valid application route types allowed to be created.
AppListZoneMembers
method in object SchAppZone
List all members of an application zone.
AppLoadFeatFiles
method in object SchAppEnvironment
Load all the necessary feat files.
AppOKToBranch
method in object SchAppRoute
Query whether it is OK to create branch.
AppOKToBreak
method in object SchAppRoute
Query whether it is OK to break.
AppOKToConcatenate
method in object SchAppRoute
Query whether it is OK to concatenate.
AppOKToFlipConnected
method in object SchAppComponent
Query whether it is OK to reconnect a component to a different compatible configuration.
AppOKToFlipHorizontal
method in object SchAppComponent
Query whether it is OK to flip the application component about Y.
AppOKToFlipOnLine
method in object SchAppComponent
Query whether it is OK to flip a component about its inserted line.
AppOKToFlipVertical
method in object SchAppComponent
Query whether it is OK to flip the application component about X.
AppOKToModifyPoints
method in object SchAppRoute
Query whether it is OK to modify (add or remove) the points.
AppOKToNoShowConnectedCntr
method in object SchAppConnector
Query whether it is OK to no show the connector after it is connected.
AppOKToPlaceInSpace
method in object SchAppComponent
Query whether the application component can be placed in free space.
AppOKToReplace
method in object SchAppReplace
Query whether it is OK to replace an existing object (component, route.
AppOKToScale
method in object SchAppComponent
Query whether it is OK to scale the application component.
AppOKToSlide
method in object SchAppComponent
Query whether the application component can be slided.
AppOKToUninsert
method in object SchAppComponent
Query whether it is OK to uninsert the application component.
AppOkToDelete
method in object SchAppDeleteCheck2
Reports if an application object can be deleted.
AppOkToDeleteWithoutWarning
method in object SchAppDeleteCheck
Reports if a warning message should be issued before deleting the object.
AppOpenLinkedDoc
method in object SchAppCntrDocLink
Open a linked document.
AppPostBreakProcess
method in object SchAppRoute
Post process after breaking an application route into 2 pieces.
AppPostConcatenateProcess
method in object SchAppRoute
Post process after concatenate 2 application routes into one.
AppPostFlipConnectedProcess
method in object SchAppComponent
Post process after reconnecting a component to a different compatible configuration.
AppPostFlipHorizontalProcess
method in object SchAppComponent
Post process after flipping a component in "x".
AppPostFlipOnLineProcess
method in object SchAppComponent
Post process after flipping an inserted component about the inserted line segment of the route.
AppPostFlipVerticalProcess
method in object SchAppComponent
Post process after flipping a component in "y".
AppPostPlaceProcess
method in object SchAppComponent
Post process after placing an application component instance.
AppPostReplaceProcess
method in object SchAppReplace
Post process after replacing an object.
AppPostRouteProcess
method in object SchAppRoute2
Post process after creating a route instance.
AppPostSlideProcess
method in object SchAppComponent
Post process after sliding a component.
AppPostSwitchGraphicProcess
method in object SchAppComponent
Post process after switching a component's graphic representation.
AppPostUninsertProcess
method in object SchAppComponent
Post process after uninserting a component, disconnecting it from a route.
AppRemoveConnector
method in object SchAppConnection
Remove a connector.
AppRemoveConnector
method in object SchAppConnectable
Remove a connector.
AppRemoveZoneMember
method in object SchAppZone
Remove an application connectable object to the zone as member.
AppSetApplicationData
method in object SchAppCntrData
Set application data.
AppSetFlowCapability
method in object SchAppCntrFlow
Set the application Flow Capability property of this connector.
AppSetFlowReality
method in object SchAppCntrFlow
Set the application Flow Reality property of this connector.
AppSetReferenceName
method in object SchAppConnectable
Set the reference name of a connectable.
AppShowCntr
method in object SchAppCntrShow
Defines show status of the applicaton connector.
AppUnLink
method in object SchAppCntrDocLink
Remove external link to another connector.
AppUpdate
method in object SchAppMultiImage
Update the image object.
Append
method in object Shots
Adds a shot to the end of the shots collection.
Append
method in object Sampled
Returns or sets the Sampled object.
Append
method in object PspListOfBSTRs
Adds a character string to the end of the list.
Append
method in object PspListOfLongs
Adds an long integer to the end of the list.
Append
method in object PspListOfObjects
Adds an object to the end of the list.
Append
method in object PspListOfDoubles
Adds a double to the end of the list.
Append
method in object SchListOfBSTRs
Adds a character string to the end of the list.
Append
method in object SchListOfLongs
Adds an long integer to the end of the list.
Append
method in object SchListOfObjects
Adds an object to the end of the list.
Append
method in object SchListOfDoubles
Adds a double to the end of the list.
AppendAbsDatas
method in object Shot
Appends to the data related to the shot.
AppendConstraint
method in object HybridShapeFill
Appends an constraint to the hybrid shape fill feature object.
AppendDatas
method in object Shot
Appends to the data related to the shot.
AppendFederatedElement
method in object HybridShapeAssemble
Appends an init to the list of elements to federate.
AppendHybridShape
method in object HybridBody
Appends a hybrid shape to the hybrid body.
AppendHybridShape
method in object HybridShape
Appends a hybrid shape to another hybrid shape.
AppendNewFaceToKeep
method in object HybridShapeFilletBiTangent
Append a new face to keep.
AppendNewPointAndParam
method in object HybridShapeIntegratedLaw
Sets 'Point on spine' and associated parameter.
AppendOperation
method in object ManufacturingProgram
Create and Insert a Manufacturing Operation of a specified type to a Manufacturing Program.
Applicability
property in object Roughness
Retrieves or sets roughness applicability.
Application
object
Represents the current CNext application and its frame window.
Application
property in object AnyObject
Returns the application.
Application
property in object Collection
Returns the application.
ApplicationID
property in object PspObject
Returns the ApplicationID of the object.
ApplicationMode
property in object PositionedMaterial
Returns the application mode of the material.
ApplicativeDataFilter
property in object TreeTabSettingAtt
AppliedUnitSymbol
property in object HybridShapeLawDistProj
Returns or sets the applied unit symbol for heterogeneous law.
Apply
method in object Move
Applies a move transformation to a movable object.
ApplyBreakoutTo
method in object DrawingViewGenerativeBehavior
If a view have gone through a breakout view operation, this method realize a breakout view on the view given as parameter, and the other types of the view remain.
ApplyCorrectedBaseOffset
method in object CalibOffsets
Applies corrected base offset.
ApplyCorrectedToolOffset
method in object CalibOffsets
Applies corrected tool offset.
ApplyJoin
property in object IgesSettingAtt
Returns or sets the Apply join setting parameter value.
ApplyLabelEffToAltChild
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the ApplyLabelEffToAltChild attribute.
ApplyMaterialOnBody
method in object MaterialManager
Apply a Material on a Body.
ApplyMaterialOnHybridBody
method in object MaterialManager
Apply a Material on a Hybrid Body.
ApplyMaterialOnPart
method in object MaterialManager
Apply a Material on a Part.
ApplyMaterialOnProduct
method in object MaterialManager
Apply a Material on a Product.
ApplyMaterialOnUserMaterial
method in object MaterialManager
Apply a Material on a User Material (Analysis entity).
ApplyNominalBaseOffset
method in object CalibOffsets
Applies the nominal base offset.
ApplyNominalToolOffset
method in object CalibOffsets
Applies nominal tool offset.
ApplyPostureToManikin
method in object MoveToPostureActivity
Set the MoveToPosture(MTP) Activity's DegreeOfFreedom(DOF) values onto Manikin (which owns this MTP activity).
ApplyReferencedGeomColor
method in object Annotation
Apply a color to referenced geometry.
ApplyReferencedInitColor
method in object Annotation
Apply the initial color to referenced geometry.
ApplyUserSubroutine
property in object ABQPressure
Sets or returns the user subroutine flag.
ApplyUserSubroutine
property in object ABQTemperature
Sets or returns the user subroutine flag.
ApplyUserSubroutine
property in object ABQFilmCondition
Sets or returns the user subroutine flag.
ApplyUserSubroutine
property in object ABQDisplacementBC
Sets or returns the user subroutine flag.
ApplyUserSubroutine
property in object ABQMechConnBehavior
Sets or returns the user subroutine flag.
ApplyUserSubroutine
property in object ABQConcentratedForce
Sets or returns the user subroutine flag.
ApplyWorkMode
method in object Product
Applies a new working mode.
ArcSelectionActivation
property in object TreeVizManipSettingAtt
Retrieves or Sets the arc-selection mode applied to the specification tree.
Area
property in object Measurable
Returns the area of the surface or wet area from volume.
AreaHeigth
property in object PrintArea
Valuates the heigth of the print area.
AreaLowX
property in object PrintArea
Valuates the low x coordinate of the print area.
AreaLowY
property in object PrintArea
Valuates the low y coordinate of the print area.
AreaSamplesU
property in object RenderingLight
Changes the number of samples taken in U direction of the area source.
AreaSamplesV
property in object RenderingLight
Changes the number of samples taken in V direction of the area source.
AreaStatus
property in object RenderingLight
Returns or sets the light area visibility status.
AreaType
property in object PCBArea
AreaWidth
property in object PrintArea
Valuates the width of the print area.
ArrBOMReport
object
ArrBendableString
object
The interface to access a CATIAArrBendableString Using this prefered syntax will enable mkdoc to document your class.
ArrNomenclature
object
Represents the UserNomenclature object.
ArrNomenclatureTree
object
Represents the root User Dictionary object.
ArrNomenclatureTree
property in object ArrWorkbench
Returns the ArrNomenclatureTree.
ArrNomenclatures
object
The collection of UserNomenclature objects.
ArrSystemLineProduct
object
The interface to access a CATIAArrSystemLineProduct Using this prefered syntax will enable mkdoc to document your class.
ArrWorkbench
object
Returns the Arrangement Workbench.
Arrange
method in object Windows
Arranges all the windows of the collection.
ArrangementArea
object
Use this object to access an ArrangementArea object's properties and functions.
ArrangementAreas
object
A Collection object for ArrangementArea objects.
ArrangementAreas
property in object ArrangementProduct
Returns the collection of ArrangementAreas under the current ArrangementProduct.
ArrangementBoundaries
object
A collection object for ArrangementBoundary objects.
ArrangementBoundaries
property in object ArrangementProduct
Returns the collection of ArrangementBoundaries under the current ArrangementProduct.
ArrangementBoundary
object
Access properties and functions of an ArrangementBoundary object.
ArrangementContour
object
The ArrangementContour object.
ArrangementContours
object
A collection object for ArrangementContours of an Area.
ArrangementContours
property in object ArrangementArea
Returns the ArrangementContours collection object associated with an ArrangementArea object.
ArrangementItemReservation
object
Use this object to access the ArrangementItemReservation properties and methods.
ArrangementItemReservations
object
A collection object for ArrangementItemReservation objects.
ArrangementItemReservations
property in object ArrangementProduct
Returns the collection of ArrangementItemReservations under the current ArrangementProduct.
ArrangementNode
object
This interface provides access to a CATIAArrangementNode object.
ArrangementNodes
object
A Collection object for ArrangementNode objects.
ArrangementNodes
property in object ArrangementRun
Returns the ArrangementNodes that make up the ArrangementRun.
ArrangementNodes
property in object ArrangementPathway
Returns the ArrangementNodes that make up the ArrangementPathway.
ArrangementNodes
property in object ArrangementBoundary
Returns the collection of ArrangementNodes that make up the ArrangementBoundary.
ArrangementPathway
object
Use this object to access properties and methods of an ArrangementPathway object.
ArrangementPathways
object
A collection object for ArrangementPathway objects.
ArrangementPathways
property in object ArrangementProduct
Returns the collection of ArrangementPathways under the current ArrangementProduct.
ArrangementProduct
object
Use this object as a factory for Arrangement collection objects.
ArrangementRectangle
object
Use this object to access the properties and methods of an ArrangementRectangle object.
ArrangementRectangles
object
A Collection object for ArrangementRectangle objects.
ArrangementRectangles
property in object ArrangementProduct
Returns the collection of ArrangementRectangles under the current ArrangementProduct.
ArrangementRun
object
Use this object to access the properties and methods of an ArrangementRun object.
ArrangementRuns
object
A collection object of ArrangementRun objects.
ArrangementRuns
property in object ArrangementProduct
Returns the collection of ArrangementRuns under the current ArrangementProduct.
Arrows
property in object DrawingView
Returns the drawing arrow collection of the drawing view.
Arrows
property in object Layout2DView
Returns the drawing arrow collection of the Layout2D view.
AskAnlMode
property in object AnalysisSettingAtt
Returns or sets the AskAnlMode parameter.
AsmConstraintSettingAtt
object
Represents the Assembly Constraints setting controller object.
AsmGeneralSettingAtt
object
Represents the Assembly General setting controller object.
Assemble
object
Represents the assemble boolean operation.
AssemblyBoolean
object
Represents the AssemblyBoolean object.
AssemblyConvertor
object
Product conversion object.
AssemblyFeature
object
Represents the AssemblyFeature object.
AssemblyFeatures
object
A collection of all the AssemblyFeature objects of a product.
AssemblyHole
object
Represents the AssemblyHole object.
AssemblyPocket
object
Represents the AssemblyPocket object.
AssemblySplit
object
Represents the AssemblySplit object.
AssemblyType
property in object ManufacturingToolAssembly
Returns the type of the tool assembly.
AssignER
method in object EKPServices
Assigns the passed geometric feature to the operation.
AssignERWithFTA
method in object EKPServices
Assigns the passed FTA to the Operation .
AssignFastenerToProcess
method in object DNBFastenerItemServices
Assigns a specified DELMIAFastener to a specified Activity and return the status of the action.
AssignFastenerToResource
method in object DNBFastenerItemServices
Assigns a specified DELMIAFastener to a specified Resource and return the status of the action.
AssignState
method in object DNB3DState
AssignedViewer
property in object TreeTabSettingAtt
Asso_mode
property in object V4WritingSettingAtt
Returns or sets the associativity mode of migration.
AssociateOutputCode
method in object ManufacturingProgram
Method is used for associate APT file to V4 program iFileName = path for APT file.
AssociatedPartName
property in object PCBHoleAndPattern
Allow to get and set the Associated Part of a hole The possible values are : the name of the instance of component in which the hole is defined.
AssociatedRefFrame
object
Interface dedicated to manage Datum Reference Frame associated to a TPS.
AssociatedRefFrame
method in object Annotation
Get the annotation on the AssociatedRefFrame interface.
Associations
property in object FunctMultiRepMgr
Get the Associations collection.
AssociativeElement
property in object DrawingText
Returns or sets the associative object of the drawing text.
AsySimActivity
object
Interface for a Delmia Simulation Activity.
AtEndOfLine
property in object TextStream
Returns a boolean value which specifies if the index position in the stream is at a end of line.
AtEndOfStream
property in object TextStream
Returns a boolean value which specifies if the index position in the stream is at a end of stream.
AthAnnotation
property in object SimulationSettingAtt
Returns or sets the AthAnnotation setting attribute value.
AthDisableSim
property in object SimulationSettingAtt
Returns or sets the AthDisableSim setting attribute value.
AthEndCondition
property in object SimulationSettingAtt
Returns or sets the AthEndCondition setting attribute value.
AthHyperlink
property in object SimulationSettingAtt
Returns or sets the AthHyperlink setting attribute value.
AthSelAgentDlg
property in object SimulationSettingAtt
Returns or sets the AthSelAgentDlg setting attribute value.
AthStateMgt
property in object SimulationSettingAtt
Returns or sets the AthStateMgt setting attribute value.
AthTextMsg
property in object SimulationSettingAtt
Returns or sets the AthTextMsg setting attribute value.
AthViewpoint
property in object SimulationSettingAtt
Returns or sets the AthViewpoint setting attribute value.
AttAP
property in object StepSettingAtt
Returns or sets the AttAP parameter.
AttASM
property in object StepSettingAtt
Returns or sets the AttASM parameter.
AttASMGVP
property in object StepSettingAtt
Returns or sets the AttASMGVP parameter.
AttAngleDefFiting
property in object StepSettingAtt
Returns or sets the AttAngleDefFiting parameter.
AttAnnotation
property in object StepSettingAtt
Returns or sets the AttAnnotation parameter.
AttFitting
property in object StepSettingAtt
Returns or sets the AttFitting parameter.
AttGVP
property in object StepSettingAtt
Returns or sets the AttGVP parameter.
AttGVPCOPS
property in object StepSettingAtt
Returns or sets the AttGVPCOPS parameter.
AttGVPCOPSSAG
property in object StepSettingAtt
Returns or sets the AttGVPCOPSSAG parameter.
AttGVPCOPSTol
property in object StepSettingAtt
Returns or sets the AttGVPCOPSSAG parameter.
AttGVPCdG
property in object StepSettingAtt
Returns or sets the AttGVPCdG parameter.
AttGVPVA
property in object StepSettingAtt
Returns or sets the AttGVPVA parameter.
AttGroupMode
property in object StepSettingAtt
Returns or sets the AttGroupMode parameter.
AttHeaderAuthor
property in object StepSettingAtt
Returns or sets the AttHeaderAuthor parameter.
AttHeaderAuthorisation
property in object StepSettingAtt
Returns or sets the AttHeaderAuthorisation parameter.
AttHeaderDescription
property in object StepSettingAtt
Returns or sets the AttHeaderDescription parameter.
AttHeaderOrganisation
property in object StepSettingAtt
Returns or sets the AttHeaderOrganisation parameter.
AttIASM
property in object StepSettingAtt
Returns or sets the AttIASM parameter.
AttLayersFilters
property in object StepSettingAtt
Returns or sets the AttLayersFilters parameter.
AttMultiCAD
property in object StepSettingAtt
Returns or sets the AttMultiCAD parameter.
AttOptimizeC2
property in object StepSettingAtt
Returns or sets the AttOptimizeC2 parameter.
AttReport
property in object StepSettingAtt
Returns or sets the AttReport parameter.
AttShow
property in object StepSettingAtt
Returns or sets the AttShow parameter.
AttTolDefOptFit
property in object StepSettingAtt
Returns or sets the AttTolDefOptFit parameter.
AttUnits
property in object StepSettingAtt
Returns or sets the AttUnits parameter.
Attach
method in object Dressup
Attaches a given product to a link of the mechanism pointed by the dressup.
Attach
method in object DNBAttachmentFactory
AttachmentCont
object
Interface representing xxx.
AttenuationAngleRatio
property in object RenderingLight
Returns or sets the light attenuation angle ratio.
AttenuationStartRatio
property in object RenderingLight
Returns or sets the light attenuation start ratio.
AttrCount
property in object Activity
This property returns the number of attributes of the current activity.
AttrName
method in object Activity
This method returns the name for the specified attribute.
AttrNames
property in object PspConnector
Returns or Sets Attribute names of the connector.
AttrValue
method in object Activity
This method returns the value for the specified attribute.
AttributeNames
property in object PspPartConnector
Returns or sets a list of attribute names associated with this connector.
AttributesFilter
property in object TreeTabSettingAtt
AugmentedLagrange
property in object ABQMechConnBehavior
Sets or returns the augmented lagrange formulation in a mechanical connection.
AuthorName
property in object IgesSettingAtt
Returns or sets the Author Name setting parameter value.
AuthorOrganization
property in object IgesSettingAtt
Returns or sets the Author Organization setting parameter value.
AutoDraft
object
Represents the AutoDraft shape.
AutoExpandActivation
property in object TreeVizManipSettingAtt
Retrieves or Sets the automatic expand mode applied to the specification tree.
AutoFillet
object
Represents the AutoFillet shape.
AutoLoadMfgCtx
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the AutoLoadMfgCtx parameter.
AutoLoadSrvMfgCtx
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the AutoLoadSrvMfgCtx parameter.
AutoLoadVolCtx
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the AutoLoadVolCtx parameter.
AutoPreviewMode
property in object AnalysisPostProSettingAtt
Returns or sets the AutoPreviewMode parameter.
AutoReframeFilter
property in object VerifTabSettingAtt
AutoSave
property in object GeneralSessionSettingAtt
Returns the data save parameter.
AutoScaleStatus
property in object RenderingEnvironmentWall
Returns or sets the texture automatic scaling status.
AutoScrollActivation
property in object TreeVizManipSettingAtt
Retrieves or Sets the automatic scrolling mode applied to the specification tree.
AutoSwitchToDesignMode
property in object AsmGeneralSettingAtt
Returns or sets the implicit switch from visualization mode to design mode setting parameter .
AutoTimeIncrementMethod
enum
Time increment estimator methods for automatic time incrementation.
AutoTimeIncrementMethod
property in object ABQExplicitDynamicsStep
Sets or returns the automatic time increment estimator method.
AutoUpdateMode
property in object AsmGeneralSettingAtt
Returns or sets the automatic update setting parameter.
AutoWalkActColor
property in object HtsTaskDisplaySettingAtt
Returns or sets the AutoWalkActColor parameter.
AutoWalkActLineType
property in object HtsTaskDisplaySettingAtt
Returns or sets the AutoWalkActLineType parameter.
AutoWalkActLineWeight
property in object HtsTaskDisplaySettingAtt
Returns or sets the AutoWalkActLineWeight parameter.
AutoWalkActivity
object
AutomaticCorrect
property in object ExpertCheckRuntime
Returns or sets the status of the automatic correction facility.
AutomaticExtrapolationMode
property in object HybridShapeTrim
Gets or sets the automatic extrapolation mode status.
AutomaticExtrapolationMode
property in object HybridShapeSplit
Gets or sets the automatic extrapolation mode status.
AutomatizedCCP
property in object HtsCCPSettingAtt
Returns or sets the AutoCCP parameter.
AuxiliaryDrillViewer
property in object VisualizationSettingAtt
Returns the AuxiliaryDrillViewer parameter.
Axis
property in object Rotate
Returns or sets the rotation axis.
Axis
property in object HybridShapeHelix
Reads / Changes the Helix axis.
Axis
property in object HybridShapeRevol
Role : To get_Axis on the object.
Axis
property in object HybridShapeSphere
Returns or sets axis on the object.
Axis
property in object HybridShapeSpiral
Reads / Changes the Spiral axis (Reference direction).
Axis
property in object HybridShapeRotate
Returns or sets the rotation axis.
Axis
property in object HybridShapeCircleCenterAxis
Returns or sets the Axis of the circle.
Axis2D
object
Interface defining a coordinate system in the 2D Space.
AxisComputation
property in object HybridShapeCircle
Returns or sets the axis computation mode.
AxisDirection
property in object HybridShapeCircle
Role : To get_Direction on the object.
AxisFirstDirection
property in object HybridShapeAffinity
Returns or sets the first direction of the reference coordinate system.
AxisLineType
property in object HybridShapeAxisLine
Returns or sets the axis line type.
AxisOrigin
property in object HybridShapeAffinity
Returns or sets the origin of the reference coordinate system.
AxisPlane
property in object HybridShapeAffinity
Returns or sets the reference plane of the reference coordinate system.
AxisRotationAngle
property in object AxisSystem
Returns the rotation angle of an axis system.
AxisRotationReference
property in object AxisSystem
Returns the reference for the axis rotation.
AxisSystem
object
The object Axis System A axis system has got one origin point and three orthogonal axes, crossing at the origin point.
AxisSystemSize
property in object PartInfrastructureSettingAtt
Returns or sets the "AxisSystemSize" parameter.
AxisSystems
object
A collection of all the AxisSystem objects contained in the part.
AxisSystems
property in object Part
Returns the collection object containing the coordinate systems.
AxisToAxis
object
Represents the hybrid shape AxisToAxis feature object.
Axis_sys
property in object ABQSpringConnectionProperty
Sets or returns the axis system in the spring connection property.
B
property in object HybridShapePlaneEquation
Gets B coefficient for plane equation.
BKTAccessRights
property in object BehaviorSettingAtt
Returns or sets the BKTAccessRights parameter.
BKTBehaviorOperationMessage
property in object BehaviorSettingAtt
Returns or sets the BKTBehaviorOperationMessage parameter.
BKTSpecificationTree
property in object BehaviorSettingAtt
Returns or sets the BKTSpecificationTree parameter.
BackClippingPlane
property in object Layout2DSettingAtt
Returns the BackClippingPlane parameter.
BackFaceCullingMode
property in object VisualizationSettingAtt
BackgroundImageMode
property in object AnalysisReportingSettingAtt
Returns or sets the BackgroundImageMode parameter.
Banner
property in object PageSetup
Returns or sets the banner text.
BannerPosition
property in object PageSetup
Returns or sets the banner position.
BannerSize
property in object PageSetup
Returns or sets Banner Size.
BaseCurve
property in object HybridShapeConnect
Returns or sets the base curve.
BaseNomenclatures
property in object ArrNomenclatureTree
Returns the collection of BaseNomenclatures within this UserDictionary.
BasicComponent
object
Interface designed to manage Analysis Basic Components .
BasicComponents
object
The collection of Basic Components defining and analysis object.
BasicComponents
property in object AnalysisSet
Returns the basic components collection associated with an analysis set.
BasicComponents
property in object BasicComponent
Returns the collection of Basic Components agregated by the basic component.
BasicComponents
property in object AnalysisEntity
Returns the basic components collection associated with an analysis entity.
BasicComponents
property in object AnalysisLocalEntity
Returns the basic components collection associated with an analysis entity.
BasicDevice
object
Interface representing a Basic Device.
BeepMode
property in object AnalysisSettingAtt
Returns or sets the BeepMode parameter.
BeginAngle
property in object HybridShapeRevol
Role : To get_BeginAngle on the object.
BeginInstanceFactory
method in object InstanceFactory
Initializes the instantiation process with the document containing the reference.
BeginInstantiate
method in object InstanceFactory
Initializes the data of the reference.
BeginMeridianAngle
property in object HybridShapeSphere
Returns BeginMeridianAngle on the object.
BeginOfCircle
property in object HybridShapeCircleTritangent
Return or Set the number of the beginning curve of the circle.
BeginOfCircle
property in object HybridShapeCircleCenterTangent
Return or Set the number of the beginning curve of the circle.
BeginOfCircle
property in object HybridShapeCircleBitangentPoint
Return or Set the number of the beginning curve of the circle.
BeginOfCircle
property in object HybridShapeCircleBitangentRadius
Return or Set the number of the beginning curve of the circle.
BeginOfCorner
property in object HybridShapeCorner
Return or Set the number of the beginning curve of the corner.
BeginOffset
property in object HybridShapeExtrude
Role : To get_BeginOffset on the object.
BeginOffset
property in object HybridShapeLinePtPt
Returns the start length of the line.
BeginOffset
property in object HybridShapeLinePtDir
Returns the start length of the line.
BeginOffset
property in object HybridShapeLineAngle
Role : Get the start length of the line.
BeginOffset
property in object HybridShapeLineNormal
Returns the start length of the line.
BeginOffset
property in object HybridShapeLineTangency
Returns the start length of the line.
BeginOffset
property in object HybridShapeLineBisecting
Returns the start offset of the line.
BeginParallelAngle
property in object HybridShapeSphere
Returns BeginParallelAngle on the object.
BeginStepNum
property in object ABQTemperatureHistory
Sets or returns the step number at which to start reading the temperature data.
BeginningDate
property in object Activity
This property returns the beginning date of the current activity.
Behavior
object
Represents a behavior.
Behavior
property in object Section
BehaviorExtension
object
Manages the behaviors of a technological object.
BehaviorMode
property in object AnnotatedView
Returns or sets the behavior mode of the annotated view.
BehaviorSettingAtt
object
Enables attribute access to BKT options.
BehaviorVBScript
object
Represents the VBScript behavior.
Behaviors
object
Represents the Behaviors collection currently managed by the application.
Behaviors
property in object Behavior
Returns the collection of children behaviors.
BendAngle
property in object ArrangementNode
Returns the BendAngle of the current ArrangementNode.
BendRadius
property in object ArrangementNode
Returns or sets the BendRadius of the current ArrangementNode.
BiDimFeatEdge
object
1-D boundary belonging to a feature whose topological result is two dimensional.
BindAnalysis
method in object Sampled
Add (bind) an analysis object to a Track.
BitangencyType
property in object VarRadEdgeFillet
Returns or set the fillet bitangency type.
Blanking
property in object DrawingTextProperties
Returns or sets the blanking mode of the drawing text.
Bodies
object
A collection of all the Body objects contained in the part.
Bodies
property in object Part
Returns the collection object containing the bodies that are direct children of the part.
Bodies
property in object HybridBody
Returns the hybrid body's Bodies collection.
Bodies
property in object OrderedGeometricalSet
Returns the ordered geometrical set's Bodies collection.
BodiesUnderOperationsInTree
property in object PartInfrastructureSettingAtt
Returns or sets the "BodiesUnderOperationsInTree" parameter.
Body
object
The object that manages a sequence of shapes, a set of sketches, a set of hybrid bodies, a set of ordered geometrical sets and a set of hybrid shapes.
Body
property in object BooleanShape
Returns the inserted body.
Body
property in object ExpertRule
Returns or sets the string that defines the body of a Rule.
Body
property in object ExpertCheck
Returns or sets the body of a Check.
Body
property in object AssemblyBoolean
Returns the operating body.
Body
property in object SWKManikin
Returns the body of the current manikin.
BodyComponent
property in object AssemblyBoolean
Returns the component containing the operating body.
BodyHideInCapture
property in object FTASettingAtt
Returns or sets the Visibility of Part instances, bodies and geometrical sets in Capture.
BodyNode
property in object SWKManikin
Returns the body node of the current manikin.
BodyPose
property in object WalkActivity
BodyToBump
property in object HybridShapeBump
Returns or sets the element to Bump.
Bold
property in object DrawingTextProperties
Returns or sets the drawing text font bold property.
BoolParam
object
Represents the boolean parameter.
BooleanOperation
property in object HybridShapeLoft
Gets or sets the boolean operation for closed lofted surface.
BooleanShape
object
Represents the shapes based on boolean operations on other shapes.
BorderEdgesMode
property in object VisualizationSettingAtt
Returns the BorderEdgesMode parameter.
BorderEdgesThickness
property in object VisualizationSettingAtt
Returns the BorderEdgesThickness parameter.
BorderType
property in object HybridShapeExtrapol
Returns or sets the border type of extrapolation.
BotOffset
property in object ThickSurface
Returns the value of the bottom offset.
BothSidesMode
property in object HybridShapeSplit
Gets or sets both sides computation mode.
Bottom
property in object PageSetup
Returns or sets the lower left corner location with respect to the bottom of the sheet of paper.
BottomAngle
property in object Hole
Returns the hole bottom angle.
BottomAngle
property in object AssemblyHole
Returns the hole bottom angle.
BottomLimit
property in object Hole
Returns the bottom limit.
BottomLimit
property in object AssemblyHole
Returns the hole bottom limit.
BottomMargin
property in object PageSetup
Returns or sets the bottom margin.
BottomType
property in object Hole
Returns the hole bottom type.
BottomType
property in object AssemblyHole
Returns or sets the hole bottom type.
BottomType
property in object ManufacturingPrismaticMachiningArea
Returns or sets the Hardness Mode on Bottom of a Manufacturing Prismatic Machining Area.
Boundaries2DLDisplay
property in object Layout2DSettingAtt
Returns the Boundaries2DLDisplay parameter.
Boundaries2DLLineType
property in object Layout2DSettingAtt
Returns the Boundaries2DLLineType parameter.
Boundaries2DLThickness
property in object Layout2DSettingAtt
Returns the Boundaries2DLThickness parameter.
Boundary
object
Topological cell, such as a face, an edge or a vertex.
Boundary
property in object HybridShapeExtrapol
Returns or sets the boundary of an extrapolated curve or surface from which extrapolation begins.
BoundaryConditions
property in object ABQHeatTransferStep
Returns the ABQBoundaryConditions container associated with the step.
BoundaryConditions
property in object ABQGeneralStaticStep
Returns the ABQBoundaryConditions container associated with the step.
BoundaryConditions
property in object ABQExplicitDynamicsStep
Returns the ABQBoundaryConditions container associated with the step.
BoundingBoxSelectionMode
property in object VisualizationSettingAtt
Returns the BoundingBoxSelectionMode parameter.
BoxCount
property in object CompositeTolerance
Retrieves datum count.
BoxDisplay
property in object MeasureSettingAtt
Returns or sets the BoxDisplay parameter .
Branch
method in object SchRoute
Create a branch from this route.
Break
method in object SchRoute
Break a route into 2 pieces.
Break
method in object SchGRRRoute
Break a route graphic into 2 pieces.
BreakInheritance
method in object Sampled
Returns or sets the Sampled object.
BrokenConstraintsCount
property in object Constraints
Returns the number of broken constraints from the Constraints collection.
BufferSize
property in object GlobalStatisticsSettingAtt
Returns or sets the size of buffer.
BuildDocDBItemFromSmarTeamID
method in object StiEngine
Copys the SmarTeam object -and its children- to default Work directory , opens it into CATIA session and returns the corresponding CATIAStiDBItem.
BuildFileDBItemFromSmarTeamID
method in object StiEngine
Copys the SmarTeam object -and its children- to default Work directory and returns the corresponding CATIAStiDBItem, Without opening the file into CATIA session.
BuildReport
method in object AnalysisPostManager
Extract the HTML Report.
Bump
property in object RenderingMaterial
Returns or sets the texture bump.
C
property in object HybridShapePlaneEquation
Gets C coefficient for plane equation.
CAPACITANCE
property in object PCBComponent
Allow to get and set the CAPACITANCE Type of a component.
CATAnalysisSetSearchType
enum
Search type for analysis sets.
CATAnalysisSetType
enum
Update type for analysis sets.
CATArrangementAreaVisuMode
enum
ArrangementAreaVisuMode Styles.
CATArrangementItemResVisuMode
enum
Visualization mode for Item Reservation.
CATArrangementRouteSection
enum
Section Types for ArrangementRun, ArrangementPathway and ArrangementBoundary objects.
CATArrangementRouteVisuMode
enum
The visualization mode for the ArrangementRun, ArrangementPathway, ArrangementBoundary objects.
CATAxisOrientationType
enum
Orientation of coordinate system.
CATAxisSystemAxisType
enum
Specification of the axes of the coordinate system.
CATAxisSystemMainType
enum
Axis System type.
CATAxisSystemOriginType
enum
Axis System Origin.
CATBSTR
typedef
Defines the string type to be used by Automation interfaces.
CATBackFaceCullingMode
enum
Back Face Culling mode.
CATBaseDispatch
object
Base class for Automation interfaces.
CATBaseUnknown
object
Base class for creating interfaces and for implementing interfaces.
CATDocContextualPriority
enum
The Contextual Priority setting attribute range of values.
CATFTAChamferGeneralTolClass
property in object FTASettingAtt
Returns the CATFTAChamferGeneralTolClass parameter.
CATFTADimConfigureSnapping
enum
CATFTADimCreateOn
enum
CATFTAEdgesLineType
property in object FTASettingAtt
Returns the CATFTAEdgesLineType parameter.
CATFTAEdgesThickness
property in object FTASettingAtt
Returns the CATFTAEdgesThickness parameter.
CATFTALeaderAssociativity
enum
The associativity of a FT&A (Functional Tolerancing & Annotation) leader with respect to the pointed geometrical element.
CATFTAUFAutoTolerancing
property in object FTASettingAtt
Returns the CATFTAUFAutoTolerancing parameter.
CATFTAUseLastTolerances
property in object FTASettingAtt
Returns the CATFTAUseLastTolerances parameter.
CATFittingShuttleVector
enum
The Shuttle Vector setting attribute range of values.
CATFullSceneAntiAliasingMode
enum
Full Scene Anti-aliasing mode.
CATFunctOrientationDirection
enum
The qualifications of Orientation and Direction of a Functional Action.
CATGenConferencing
enum
The Conference Driver setting attribute range of values.
CATGenDataSave
enum
The Data Save setting attribute range of values.
CATGenUIStyle
enum
The User Interface Style setting attribute range of values.
CATManipAutoInsertMode
enum
CATManipClashMode
enum
The manipulation clash mode attribute's possible values.
CATMultiSelectionMode
enum
Types of multi-selection.
CATSafeArrayVariant
typedef
Defines a CATSafeArrayVariant type to be used by Automation interfaces.
CATScriptLanguage
enum
Types of macro libraries defined in the V5 architecture.
CATSearchContextScope
enum
The Default Power Input Context Scope setting attribute range of values.
CATSelectionFilter
enum
Values to use as selection filter.
CATStrSectionProperties
enum
Property type.
CATV4IV4V5SpecDraftMigrationEnum
enum
The mode of migration of draft during Copy/Paste As Spec.
CATV4IV5V4AssociativityModeEnum
enum
The associativity mode of migration during Save As Model.
CATV4IV5V4ErrorFeatureCreationEnum
enum
The error feature's creation mode during Save As Model.
CATV4IV5V4InternalCurveCreationEnum
enum
The internal curves' creation mode during Save As Model.
CATVariant
typedef
Defines the variant type to be used by Automation interfaces.
CERR
property in object ErrorlogStatisticsSettingAtt
Returns or sets the state ot the critical error severity level field.
CGRAdhesionSettingAtt
object
Represents the base object to handle the parameters of the cache.
CMND
property in object ErrorlogStatisticsSettingAtt
Returns or sets the state ot the command name field.
COMT
property in object ErrorlogStatisticsSettingAtt
Returns or sets the state ot the abend comment level field.
CPUS
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the cpu time field.
CacheExport
method in object DMUDataFlow
Exports all documents related to the product in a directory.
CacheImport
method in object DMUDataFlow
Imports in the cache of marked documents in a directory.
CacheMaxSizeMo
property in object CacheSettingAtt
Returns or sets the value of the cache maximum size.
CacheSettingAtt
object
Represents the base object to handle the parameters of the cache.
CacheSize
property in object Application
Returns or sets the default local cache size used by the application.
CalculatedBeginTime
property in object Activity
This property returns and calculated time cyle on the current activity.
CalculatedCycleTime
property in object Activity
This property returns and sets the calculated time cyle on the current activity.
CalibOffsets
object
Interface to set Robot base/Tool offsets based on Calibration.
CalledTask
property in object HumanCallTask
CalloutCreationDialogBox
property in object Layout2DSettingAtt
Returns the CalloutCreationDialogBox parameter.
Camera
object
Represents the camera.
Camera
property in object Capture
Retrieves or sets a camera.
Camera2D
object
Represents a 2D camera.
Camera3D
object
Represents a 3D camera.
Cameras
object
A collection of all the Camera objects currently attached to a Document object.
Cameras
property in object Document
Returns the document's collection of cameras.
Cancel
method in object BehaviorVBScript
Inform Client VB has Failed & Has Not operated.
CanonicFreeMode
property in object HybridShapeHealing
Returns or sets the Canonic Free Mode of the healing.
CanonicalDetection
property in object HybridShapeLoft
Returns or sets whether canonical surfaces of the lofted surface are detected.
CanonicalDetection
property in object HybridShapeSweepLine
Returns or sets whether canonical surfaces of the swept surface are detected.
CanonicalDetection
property in object HybridShapeSweepConic
Returns or sets whether canonical surfaces of the swept surface are detected.
CanonicalDetection
property in object HybridShapeSweepCircle
Returns or sets whether canonical surfaces of the swept surface are detected.
Caption
property in object Window
Returns or sets the window caption.
Caption
property in object Application
Returns or sets the application's window title.
Capture
object
CaptureFactory
object
Interface for the Capture Factory.
CaptureFactory
property in object AnnotationSet
Obtain the factory to create Capture.
CaptureToFile
method in object Viewer
Captures the actually displayed scene by the viewer as an image, and stores the image in a file.
Captures
object
Captures
property in object AnnotationSet
Retrieves all the Captures that belong to the set.
CartoonContourThickness
property in object RenderingShooting
Returns or sets the cartoon contour thickness.
CartoonShadingStatus
property in object RenderingShooting
Returns or sets the cartoon shading status of shooting.
CartoonStatus
property in object RenderingShooting
Returns or sets the cartoon status of shooting.
CartoonStrokeStatus
property in object RenderingShooting
Returns or sets the cartoon stroke status of shooting.
Cases
property in object ABQAnalysisModel
Returns the list of Abaqus analysis cases associated with the analysis model.
Cat3DColorInheritanceMode
enum
View color mode.
Cat3DXmlGeomRepresentationType
enum
The 3D XML geometry representation setting attribute range of values.
Cat3DXmlPPRSaveConfig
enum
The PPR save config setting attribute range of values.
CatAlgorithmType
enum
Algorithm types.
CatAnnotatedViewBehavior
enum
CatAnnotatedViewCmdOption_NoAnimation
define
CatAnnotatedViewCmdOption_NoToolbar
define
CatArrangeStyle
enum
Window arrangement style.
CatAsmAutoSwitchToDesignMode
enum
Option managing the implicit switch from visualization mode to design mode.
CatAsmConstraintCreationMode
enum
Constraint creation mode.
CatAsmExtendMoveToFixT
enum
Option managing the extension of a move to the components involved in a FixTogether.
CatAsmPasteComponentMode
enum
Component Paste mode.
CatAsmQuickConstraintMode
enum
Quick constraint mode.
CatAsmRedundancyMode
enum
Redundancy check mode.
CatAsmUpdateMode
enum
Update command mode.
CatAsmUpdateStatusComputeMode
enum
Real Update status computation mode.
CatBannerPosition
enum
Banner position.
CatBlankingMode
enum
Annotation blanking mode.
CatCSHoleMode
enum
Countersunk hole mode.
CatCameraType
enum
Types of camera.
CatCaptureFormat
enum
File format in which the capture of a viewer can be saved.
CatChamferMode
enum
Chamfer definition mode.
CatChamferOrientation
enum
Chamfer orientation.
CatChamferPropagation
enum
Chamfer propagation mode.
CatCircularPatternParameters
enum
Circular Pattern Parameters.
CatClashComputationType
enum
The different types of clash computation.
CatClashExportType
enum
The different types of clash export.
CatClashImportType
enum
The different types of clash import.
CatClashInterferenceType
enum
The different types of clash interference.
CatClippingFrameReframeOnMode
enum
At creation of a view the clipping frame is reframed on.
CatClippingMode
enum
Depth effects.
CatConflictComparison
enum
The different cases of comparison of conflicts.
CatConflictStatus
enum
The different statuses of conflicts.
CatConflictType
enum
The different types of conflicts.
CatConstraintAngleSector
enum
Special constraint property for angle constraints.
CatConstraintDistConfig
enum
Special constraint configurations for distance constraints.
CatConstraintDistDirection
enum
Constraint distance direction.
CatConstraintMode
enum
Constraint working mode Part constraints can work in two modes: as constraints or as measurements.
CatConstraintOrientation
enum
Constraint elements relative orientation.
CatConstraintRefAxis
enum
Constraint reference axis.
CatConstraintRefType
enum
Constraint reference type.
CatConstraintSide
enum
Constrained elements relative side.
CatConstraintStatus
enum
Possible state of a constraint.
CatConstraintType
enum
Possible types of constraints.
CatDMUGroupPreviewHiddenObjectsDisplayMode
enum
The different modes for the display of hidden objects in DMU Group Preview.
CatDedicatedFilterType
enum
Specifies if the dedicated filter mask or not the background.
CatDescriptionLengthType
enum
Precision of the text report.
CatDftWeldFinishSymbol
enum
Finish symbol of Drawing welding.
CatDftWeldingTail
enum
Drawing welding tail.
CatDimAnalyse
enum
Dimension analyse.
CatDimDualDisplay
enum
Dimension dual value display mode.
CatDimFake
enum
Dimension value fake mode.
CatDimFrame
enum
Dimension value frame.
CatDimFramedElement
enum
Dimension framed element.
CatDimFramedGroup
enum
Dimension framed group.
CatDimLineGraphRep
enum
Dimension line graphical representation.
CatDimLineRep
enum
Dimension line representation.
CatDimMode
enum
Dimension mode.
CatDimOrientation
enum
Dimension line orientation.
CatDimReference
enum
Dimension line reference.
CatDimScore
enum
Dimension scoring mode.
CatDimSymbols
enum
Dimension line symbols.
CatDimType
enum
Dimension type.
CatDistanceComputationType
enum
The different types of clash computation.
CatDistanceMeasureType
enum
The different types of distance measure.
CatDraftMode
enum
Draft mode.
CatDraftMultiselectionMode
enum
Multi Selection Mode.
CatDraftNeutralPropagationMode
enum
Draft neutral propagation.
CatDrawingStandard
enum
The standard for the drawing document.
CatDrawingViewType
enum
Type of a view.
CatDrwNewSheetFrom
enum
Enum for the way of new sheet creation.
CatElectronicType
enum
CatFileSelectionMode
enum
Mode used when displaying a file selection box using CATIA.
CatFileType
enum
Possible types of Files.
CatFilletBitangencyType
enum
Fillet Bitangency Type.
CatFilletBoundaryRelimitation
enum
Fillet boundary relimitation.
CatFilletEdgePropagation
enum
Fillet edge propagation.
CatFilletRepresentation
enum
Fillet drawing mode.
CatFilletTrimSupport
enum
Fillet Trim Support.
CatFilletVariation
enum
Fillet edge variation.
CatGeometricType
enum
Enumeration for all types of possible geometrical elements.
CatGridPositionMode
enum
The different modes for section grid positioning.
CatHiddenLineMode
enum
View hidden line drawing mode.
CatHoleAnchorMode
enum
Hole anchoring mode.
CatHoleBottomType
enum
Hole bottom type.
CatHoleThreadSide
enum
Hole threading .
CatHoleThreadStandard
enum
Hole Thread Standard It describes the standard to be used for hole threads.
CatHoleThreadingMode
enum
Hole threading mode.
CatHoleType
enum
Hole type.
CatImageRotation
enum
Image rotation.
CatImageViewMode
enum
Image view mode.
CatJustification
enum
Drawing text justification.
CatLightingMode
enum
Lighting modes.
CatLimitMode
enum
Limit mode.
CatManufacturingPrecedenceType
enum
Possible types of precedence.
CatMarker2DType
enum
CatMarker3DType
enum
CatMarkerTextOrientation
enum
The different orientations of a text Marker2D or Marker3D.
CatMeasurableName
enum
CatMergeMode
enum
Merge mode.
CatNavigationStyle
enum
Navigation styles.
CatOptimizationType
enum
Optimization types.
CatOutPutFormatType
enum
Output format of the Knowledge Expert text report.
CatPaperOrientation
enum
Paper orientation.
CatPaperSize
enum
Paper size.
CatPartElementsNamingMode
enum
Naming mode parameter's possible values.
CatPartSurfaceElementsLocation
enum
Wireframe and surface elements location parameter's possible values.
CatPartUpdateMode
enum
Update mode setting parameter's possible values.
CatPictureFormat
enum
Picture format parameters.
CatPointsProjectionMode
enum
3D points projection mode.
CatPrintColor
enum
Color Appearance.
CatPrintLineCap
enum
CatPrintLineCap.
CatPrintLineSpecification
enum
CatPrintQuality
enum
Print quality.
CatPrintRenderingMode
enum
Print rendering mode.
CatPrinterDirState
enum
Printer directory state.
CatPrismExtrusionDirection
enum
Prism extrusion type.
CatPrismOrientation
enum
Prism extrusion orientation mode.
CatProductSource
enum
Possible types of product source.
CatProjViewType
enum
View projection mode.
CatProjectionMode
enum
Projection modes.
CatPspIDLApplicationID
enum
Application IDs.
CatPspIDLAttrDataType
enum
Attribute type.
CatPspIDLDomainID
enum
Doamin IDs.
CatPspIDLFlowCapability
enum
Flow capability directions.
CatPspIDLFlowReality
enum
Actual Flow directions.
CatPspIDLFunctionStatus
enum
Indicates if function has network data and if it is linked to a physical part.
CatPspIDLPartConnectorType
enum
Part Connector types.
CatRectangularPatternParameters
enum
Rectangular Pattern Parameters.
CatRenderingMode
enum
Rendering modes.
CatRepType
enum
Possible types of representations.
CatRepresentationMode
enum
Representation mode of a generative view.
CatSacSettingsEnum
enum
The different types for the Import Data settings.
CatSampledAnalysisMode
enum
Possible values of how analysis is to be used when it is added to a sampled based object.
CatSampledSplitType
enum
CatSceneType
enum
The different types of a new ProductScene scene.
CatSchIDLApplicationID
enum
DS supported schematic application ID.
CatSchIDLArrowFrequency
enum
Schematic route arrow frequency.
CatSchIDLArrowPosition
enum
Schematic route arrow position.
CatSchIDLArrowStyle
enum
Schematic route arrow style.
CatSchIDLCntrFlowCapability
enum
Schematic connector flow directions.
CatSchIDLCntrFlowReality
enum
Schematic connector flow directions.
CatSchIDLCntrSymbolType
enum
Schematic connector symbol types.
CatSchIDLDisplayMode
enum
Schematic visualization display modes.
CatSchIDLExtensionType
enum
Schematic extension types.
CatSchIDLGRRRouteReshapeMode
enum
Flag for whether or not the route shape is fixed.
CatSchIDLGapPriority
enum
Schematic route gap priority.
CatSchIDLGapStyle
enum
Schematic route gap style.
CatSchIDLInternalFlowStatus
enum
Schematic internal flow flow status.
CatSchIDLInternalFlowType
enum
Schematic internal flow types.
CatSchIDLMultiImageStatus
enum
Status of the image in MIO.
CatSchIDLRouteAlternateGraphicStyle
enum
Alternate Graphic styles for routes Role : For displaying a route under alternate display mode.
CatSchIDLRouteCompressMode
enum
Flag for whether or not to compress a schematic route (i.
CatSchIDLRouteMode
enum
Schematic routing modes.
CatSchIDLRouteSymbolUpdateMode
enum
Flag for whether or not to update location of route symbols when setting a route's path.
CatSchIDLRouteUnsetGapsMode
enum
Flag for whether or not to unset gaps when setting a route's path.
CatScriptLibraryType
enum
Types of macro libraries defined in the V5 architecture.
CatSecWindowOpenMode
enum
CatSectionBehavior
enum
The different types of a section.
CatSectionClippingMode
enum
The different algorithmes used to computate the section result.
CatSectionGridStyle
enum
The different styles of the section grid.
CatSectionPlaneNormal
enum
The different default normals for the section plane.
CatSectionPlaneOrigin
enum
The different default origins for the section plane.
CatSectionType
enum
The different types of a section.
CatSewingIntersectionMode
enum
Sewing Intersection mode.
CatSheetGenViewsPosMode
enum
Positioning mode values for generative views inside the sheet.
CatSheetProjectionMethod
enum
Sheet projection Method.
CatShowResultType
enum
Sorting option for the Expert Knowledge text report.
CatShuttleMoveMode
enum
CatShuttleVector
enum
CatSolveType
enum
Type for controlling the resolution in Knowledge Expert.
CatSpecsAndGeomWindowLayout
enum
Specification and geometry window layout.
CatSpecsLayout
enum
Specification tree layout.
CatSplitSide
enum
Split side.
CatStrCreationMode
enum
Not yet implemented.
CatStrCutbackType
enum
CatStrLinkMode
enum
Associative mode.
CatStrMaterialOrientation
enum
Material orientations.
CatStrMemberExtremity
enum
Extremities of a Member object.
CatStrPlacementPoint
enum
CatStrPlaneMode
enum
Usage modes of a plane used as a support for a member support axis.
CatSymbolType
enum
Symbol type.
CatTableBorderType
enum
Justification of a table cell.
CatTableComputeMode
enum
Compute mode of a table.
CatTableInvertMode
enum
Invert mode of a table.
CatTablePosition
enum
Table anchor position or table cell alignment.
CatTextAnchorPosition
enum
Drawing text anchor position.
CatTextFlipMode
enum
Text mirroring mode.
CatTextFrameType
enum
Drawing text frame types.
CatTextProperty
enum
Drawing text properties.
CatThreadLinkedTo
enum
Specifies the kind of link the thread has.
CatThreadPolarity
enum
Thread/Tap Polarity Management It describes the thread polarity.
CatThreadSide
enum
Threading/Tapping side It describes the side of thread/tap.
CatThreadStandard
enum
Thread/Tap Standard It describes the standard to be used for thread/tap.
CatThreadType
enum
Thread type.
CatTreeOrientationEnum
enum
Orientations for the specification tree.
CatTreeSizeTypeEnum
enum
Types for the size of the text in the specification tree.
CatTreeTypeEnum
enum
Types for the specification tree.
CatView2DModeVisu
enum
CatViewBackgroundMode
enum
The way the background of a view is displayed at creation.
CatViewFilterCreationMode
enum
At creation of a view, this enum defines how the filter of this view is configured.
CatViewSide
enum
CatViewSide is used in conjonction with a reference View2DL and a ViewBox.
CatViewType
enum
Type of a view.
CatVisLayerType
enum
Types of layer.
CatVisPropertyPick
enum
Types of Pick/NoPick states.
CatVisPropertyShow
enum
Types of Show/NoShow states.
CatVisPropertyStatus
enum
Types of result of a query on graphic properties for the current selection.
CatVisPropertyType
enum
Types of graphic properties.
CatVisuBackgroundMode
enum
Background Visu Mode.
CatVisuIn3DMode
enum
3D Visu Mode.
CatVisualizationType
enum
Type of checks to be chosen for the Expert Knowledge Report.
CatWeldAdditionalSymbol
enum
Drawing welding additional symbol.
CatWelding
enum
Active drawing welding.
CatWeldingField
enum
Drawing welding field.
CatWeldingSide
enum
Drawing welding side.
CatWeldingSymbol
enum
Drawing welding symbol.
CatWindowState
enum
Window state.
CatWorkModeType
enum
Possible types of Workmode.
CatalogDocument
object
Represents the Document object for catalog.
CatalogName
property in object StrSection
Returns the parameter defining the catalog name.
CatalogPartName
property in object PspFunctional
Returns catalog part name of physical object that realizes this function.
CatalogSHMObjectSettingAtt
object
Represents the CATIA Sheet Metal Aerospace General setting controller object.
CausticAccuracy
property in object RenderingShooting
Returns or sets the number of photons to use when estimating radiance for caustics.
CausticPhotonsNumber
property in object RenderingLight
Changes the maximum number of caustic photons to emit from the light source.
CausticRadius
property in object RenderingShooting
Returns or sets the maximum distance in which photons for caustics are located.
CausticStatus
property in object RenderingShooting
Returns or sets the caustic status of shooting.
CautionColor
property in object DevAnalysisSettingAtt
Returns or sets the CautionColor parameter.
CautionZone
property in object DevAnalysisSettingAtt
Returns or sets the CautionZone parameter.
CellAsString
method in object DesignTable
Returns the content of a specific cell.
Center
property in object Scaling2
Returns or sets the reference element.
Center
property in object HybridShapeSphere
Returns or sets the sphere center.
Center
property in object HybridShapeScaling
Returns or sets the reference element.
Center
property in object HybridShapeCylinder
Returns or sets the center of the cylinder object.
Center
property in object HybridShapeCircleCtrPt
Returns or sets the circle center.
Center
property in object HybridShapeCircleCtrRad
Returns or sets the circle center.
CenterCurve
property in object Sweep
Returns the sketch used as the sweep center curve.
CenterCurveElement
property in object Sweep
Returns or sets the center curve .
CenterElem
property in object HybridShapeCircleCenterTangent
Returns or sets the Center Element of the circle.
CenterLine
property in object Sketch
Returns the geometric 2D line defined as the center line of the sketch.
CenterPoint
property in object Circle2D
Returns the center point of the circle.
CenterPoint
property in object Ellipse2D
Returns the center point of the ellipse.
CenterPoint
property in object HybridShapeSpiral
Reads / Changes the center point of the Spiral.
CenterTension
property in object HybridShapeBump
Returns or sets the tensuion center parameter.
Chamfer
object
Represents the chamfer shape.
ChangeFeatureName
method in object HybridShapeFactory
Set display name for Shape Design Features.
ChangePartType
method in object PspBuildPart
Returns the part after changing the part type of an existing part.
Check
object
Represents the check relation.
Check
method in object OptimizerWorkBench
CheckEdition
property in object ExpertCheckRuntime
Returns the editable object corresponding to this check.
CheckReportHtml
property in object ReportGenerationSheetSettingAtt
Returns or sets the CheckReportHtml parameter.
ChessboardJointHeight
property in object RenderingMaterial
Returns or sets the height of the join of a chessboard texture.
ChessboardJointWidth
property in object RenderingMaterial
Returns or sets the width of the join of a chessboard texture.
ChessboardOffset
property in object RenderingMaterial
Returns or sets the offset coefficient for a chessboard texture.
ChessboardTileHeight
property in object RenderingMaterial
Returns or sets the height of the tile of a chessboard texture.
ChessboardTileWidth
property in object RenderingMaterial
Returns or sets the width of the tile of a chessboard texture.
ChildrenActivities
property in object Activity
This property returns the interface which manages the children hierarchy on the activity.
ChildrenTSAs
property in object Resource
This property returns the interface which manages the children TSA of the given resource/system.
ChoiceNo
property in object HybridShapeSweepCircle
Returns or sets the choice number, which corresponds to each solution of a given circular sweep case.
ChooseBestOrientation
property in object DraftingPageSetup
Activates or deactivates the choice of the best orientation.
ChooseBestOrientation
property in object DrawingPageSetup
Activates or deactivates the choice of the best orientation.
CircPattern
object
Represents the circular pattern.
Circle2D
object
Class defining a circle in 2D Space.
CircularPatternParameters
property in object CircPattern
Returns or sets the circular pattern parameters required to define the pattern.
Clash
object
Represents the Clash object.
ClashMode
property in object ManipSettingAtt
ClashResult
object
Represents the ClashResult object.
ClashResults
object
A collection of all ClashResult objects currently managed by the application.
ClashSound
property in object ManipSettingAtt
ClashWhileMoving
property in object FittingSettingAtt
Clashes
object
A collection of all Clash objects currently managed by the application.
Clashes
property in object SPAWorkbench
Returns the Clashes collection.
CleanTolCheck
property in object V4WritingSettingAtt
Returns or sets the small edges and faces cleaning tolerance activation.
CleanTolValue
property in object V4WritingSettingAtt
Returns or sets the small edges and faces cleaning tolerance value if activated.
CleanUp
method in object Merges
Performs some clean-up.
CleanUp
method in object Wrappings
Cleans up.
CleanUp
method in object DMOOffsets
Cleans up.
CleanUp
method in object Silhouettes
Performs some clean-up.
CleanUp
method in object SweptVolumes
Cleans up.
CleanUp
method in object VibrationVolumes
Cleans up.
Clear
method in object Selection
Clears the selection.
ClearExclusionRegions
method in object ABQRigidCoupling
Clears the exclusion regions list.
ClearExclusionRegions
method in object ABQSmoothCoupling
Clears the exclusion regions list.
ClearHandler
method in object ABQRigidCoupling
Clears the handler.
ClearHandler
method in object ABQSmoothCoupling
Clears the handler.
ClearPinSupports
method in object ABQRigidBodyConstraint
Clears the pin point supports for the rigid body.
ClearSupports
method in object ABQMassScaling
Clear the list of supports.
ClearTieSupports
method in object ABQRigidBodyConstraint
Clears the tie point supports for the rigid body.
Clearance
property in object Clash
Returns or sets the clearance value for the computation.
ClearanceContactPressureValue
property in object ABQMechConnBehavior
Sets or returns the clearance at which contact pressure is zero in a mechanical connection.
ClearanceVoxel
property in object N4DNavigatorSettingAtt
Returns or sets the clearance value (oValue the clearance value in mm).
ClippingFrame
property in object Layout2DSettingAtt
Returns the ClippingFrame parameter.
ClippingFrameReframeOnMode
property in object Layout2DSettingAtt
Returns the ClippingFrameReframeOnMode parameter.
ClippingMode
property in object Viewer3D
Returns or sets the clipping mode.
ClippingMode
property in object SectioningSettingAtt
Returns or sets the ClippingMode parameter.
ClippingPlane
property in object Capture
Retrieves the clipping plane state, activated or Not.
ClippingViewOutlineLinetype
property in object Layout2DSettingAtt
Returns the ClippingViewOutlineLinetype parameter.
ClippingViewOutlineThickness
property in object Layout2DSettingAtt
Returns the ClippingViewOutlineThickness parameter.
ClockType
property in object PspPartConnector
Returns the clocking type (how symmetric this end is) for this connector.
ClockwiseRevolution
property in object HybridShapeHelix
Reads / Modifies the sense of revolutions .
ClockwiseRevolution
property in object HybridShapeSpiral
Reads / Modifies the sense of revolutions .
Close
method in object Window
Closes the window.
Close
method in object Document
Closes the document.
Close
method in object TextStream
Closes a text stream.
CloseEdition
method in object Sketch
Closes the Sketch Edition.
CloseStream
method in object ManufacturingOutput
Close the Stream.
CloseSurface
object
Represents the Close feature.
Closure
property in object HybridShapePolyline
Returns or sets the flag to decide closure of the polyline.
Code_page
property in object InteropSettingAtt
Retrieves or sets the value of the "Reading Code page" setting parameter.
Code_page_Dest
property in object V4WritingSettingAtt
Returns or sets the activation state of the writing code page.
CollWalkClearance
property in object HtsGeneralSettingAtt
Collapse
method in object DMUDataFlow
Collapse the product by replacing all sub-product by corresponding components.
CollapseExpandFilter
property in object TreeTabSettingAtt
Collection
object
Represents the base object for collections.
CollisionClearance
property in object CollisionFreeWalk
Returns and sets the value for 'collision clearance' in a collision free walk.
CollisionFreeWalk
object
CollisionSearchIntensity
property in object HtsGeneralSettingAtt
Color
property in object PageSetup
Returns or sets the color mode to use when printing.
Color
property in object ElecSchWire
Color
property in object Fastener
Returns or sets the color of the fastener.
Color
property in object DrawingDimLine
Returns or sets color of dimension line.
Color
property in object DrawingDimExtLine
Returns or sets color of extension line.
Color
property in object FastenerGroup
Sets the color of the fasteners.
Color
property in object DrawingTextProperties
Returns or sets the color of the drawing text.
ColorBackgroundMode
property in object VisualizationSettingAtt
Returns the ColorBackgroundMode parameter.
ColorESSObjectSettingAtt
object
The interface to access a CATIAColorESSObjectSettingAtt.
ColorInheritanceMode
property in object DrawingViewGenerativeBehavior
Returns or sets the view color inheritance mode.
ColorNumber
property in object RenderingMaterial
Returns or sets the 3d texture color number.
ColorSTDObjectSettingAtt
object
The interface to access a CATIAColorSTDObjectSettingAtt.
ColorSynchronizationEditability
property in object PartInfrastructureSettingAtt
Returns or sets the "ColorSynchronizationEditability" parameter.
ColorSynchronizationMode
property in object PartInfrastructureSettingAtt
Returns or sets the "ColorSynchronizationMode" parameter.
ColumnsNb
property in object DesignTable
Returns the nb of columns in the design table file.
CommandStatisticsSettingAtt
object
Interface for Command statistic Controler Role : the command statistics controler manages the values of all or only a part of the attributes available for the thematic.
Commands
property in object Mechanism
Returns the collection of commands in the mechanism.
Comment
property in object Relation
Returns or sets the comment associated with the relation.
Comment
property in object Parameter
Returns or sets the parameter object comment.
Comment
property in object AnnotatedView
Returns or sets the comment associated with the annotated view.
Comment
property in object Conflict
Returns or sets a comment on the conflict.
Comment
property in object ManufacturingTool
Return the Default Comment of a Manufacturing Setup.
Comment
property in object ManufacturingSetup
Return the Default Comment of a Manufacturing Setup.
Comment
property in object ManufacturingMachine
Return the Comment of a Machine.
Comment
property in object ManufacturingProgram
Return the Default Comment of a Manufacturing Program.
Comment
property in object ManufacturingOperation
Return the Comment linked to a Manufacturing Operation.
Comment
property in object ManufacturingToolAssembly
Returns the default comment of a tool assembly.
Comment
property in object ExpertRuleBaseComponentRuntime
Returns or sets the comment of a rulebase component.
Commit
method in object SettingController
Makes a memory copy of the setting attribute values.
CommitForUnits
method in object UnitsSheetSettingAtt
Implements a function from an interface.
CompEndSectionTangent
property in object HybridShapeLoft
Returns or sets whether the tangent surface to the end section of the lofted surface is computed.
CompRef
property in object DrawingComponent
Returns the component reference of this drawing component instance.
CompStartSectionTangent
property in object HybridShapeLoft
Returns or sets whether the tangent surface to the start section of the lofted surface is computed.
CompanionPath
property in object DocumentationSettingAtt
Returns the User Companion location (path) parameter.
ComparisonInfo
property in object Conflict
Returns the information on the comparison between the conflict and the previous one.
CompassPos
property in object HtsCCPSettingAtt
Returns or sets the CompassPos parameter.
ComplementaryExtract
property in object HybridShapeExtract
Returns or sets the ComplementaryExtract checked/unchecked for the extract.
CompletewithPolarStrategy
method in object ManufacturingProgram
Complete a list of Operation in a Manufacturing Program in Polar Mode.
Components
property in object DrawingView
Returns the drawing component instances collection (i.
Components
property in object Layout2DView
Returns the Layout2D component instances collection (i.
ComposeWith
method in object Reference
Composes a reference with another reference thus creating a new composite reference.
CompositeTolerance
object
Interface for accessing composite tolerance on a TPS.
CompositeTolerance
method in object Annotation
Get the annotation on the CompositeTolerance interface.
CompositesMaterial
object
Represents a Composites Material object.
Compress
method in object SchRoute
Compress a the defining points of a route, removing coincident points.
Compress
method in object SchGRRRoute
Compress a the defining points of a route graphic, removing coincident points.
Compress2
method in object SchGRRRoute
Compress the defining points of a route graphic, removing coincident points.
ComputationDir
property in object ABQJob
Sets or returns the computation directory.
ComputationType
property in object Clash
Returns or sets the computation type.
ComputationType
property in object Distance
Returns or sets the computation type for the computation.
Compute
method in object HybridShape
Computes the result of the hybrid shape.
Compute
method in object Clash
Computes the conflicts.
Compute
method in object AnalysisCase
Launch the computation (Update) of an analysis case.
Compute
method in object Distance
Computes the distance.
Compute3DCut
method in object ThreeDCuts
Computes the 3DCut on the selected products.
Compute3DCutWithAReference
method in object ThreeDCuts
Computes the 3DCut on the selected products, according to a reference product.
ComputeASilhouette
method in object Silhouettes
Computes a silhouette on the selected products.
ComputeASilhouetteWithAReference
method in object Silhouettes
Computes a silhouette on the selected products, according to a reference product.
ComputeASweptVolume
method in object SweptVolumes
Computes a swept volume.
ComputeASweptVolumeFromReplay
method in object SweptVolumes
Computes a swept volume.
ComputeASweptVolumeFromSweptable
method in object SweptVolumes
Computes a swept volume.
ComputeAThickness
method in object DMOThicknesses
Compute a thickness on the selected products.
ComputeAThicknessWithAReference
method in object DMOThicknesses
Compute a thickness on the selected products, according to a reference product.
ComputeAWrapping
method in object Wrappings
Compute a wrapping on the selected products.
ComputeAWrappingWithAReference
method in object Wrappings
Compute a wrapping on the selected products, according to a reference product.
ComputeAnOffset
method in object DMOOffsets
Compute a offset on the selected products.
ComputeAnOffsetFromVectors
method in object DMOOffsets
ComputeAnOffsetFromVectorsWithAReference
method in object DMOOffsets
Compute an offset on the selected products, according to some vectors and a reference product.
ComputeAnOffsetWithAReference
method in object DMOOffsets
Compute an offset on the selected products, according to a reference product.
ComputeMerge
method in object Merges
Computes the merge on the selected products.
ComputeMeshOnly
method in object AnalysisCase
Launch the computation (Update) of an analysis case.
ComputeMode
property in object DrawingTable
Returns or sets the compute mode of a drawing table.
ComputeSimplification
method in object Simplifications
Computes a simplification on the selected products.
ComputeSimplificationWithAReference
method in object Simplifications
Computes a simplification on the selected products, according to a reference product.
ComputeSweptVolumes
method in object SweptVolumes
Computes a swept volume, from a replay or a track.
ComputeSweptVolumesFromReplay
method in object SweptVolumes
Computes a swept volume from a replay.
ComputeSweptVolumesFromSweptable
method in object SweptVolumes
Computes a swept volume from a track.
ComputeThickness
method in object DMOThicknesses
Compute a thickness on the selected products.
ComputeThicknessWithReference
method in object DMOThicknesses
Compute a thickness on the selected products, according to a reference product.
ComputeVibrationVolume
method in object VibrationVolumes
Computes a vibration volume, from a position input file.
ComputeVibrationVolumeFromTrack
method in object VibrationVolumes
Computes a vibration volume, from a track.
ComputeVibrationVolumeFromTrackWithAReference
method in object VibrationVolumes
Computes a vibration volume, from a track, according to a reference product.
ComputeVibrationVolumeWithAReference
method in object VibrationVolumes
Computes a vibration volume, from a position input file, according to a reference product.
Concatenate
method in object SchRoute
Concatenate 2 routes into one.
Concatenate
method in object SchGRRRoute
Concatenate 2 route graphic objects into one.
ConcatenateKeepGRR2
method in object SchGRRRoute
Concatenate 2 route graphic objects into one.
ConcatenateKeepRoute2
method in object SchRoute
Concatenate 2 routes into one.
ConcatenatePaths
method in object FileSystem
Concatenates two path chunks to make a new path.
ConductanceTableSize
property in object ABQThermalConnBehavior
Returns the size of the conductance table.
Conferencing
property in object GeneralSessionSettingAtt
Returns the conference driver parameter.
Configuration
property in object DesignTable
Returns or sets the current configuration.
ConfigurationsNb
property in object DesignTable
Returns the number of design table configurations.
Conflict
object
Represents the Conflict object.
Conflicts
object
A collection of all Conflict objects currently detected by a Clash object.
Conflicts
property in object Clash
Returns the collection of computed Conflicts.
Conflicts
property in object ClashResult
Returns the collection of computed Conflicts.
ConicParameter
property in object HybridShapeConic
Returns or sets the conic parameter.
ConicUserTol
property in object HybridShapeConic
Gets or sets the conic User Tolerance.
ConicalSectionParameter
property in object HybridShapeFilletBiTangent
Returns or Sets parameter for conical section.
Connect
method in object PspConnector
Connect the connector to another connector.
Connect
method in object StiEngine
Connects to SmarTeam Integration .
ConnectToPPRHub
method in object MHIOpenAccess
ConnectType
property in object HybridShapeConnect
Returns or sets whether the connect curve is or should be created as a"Normal Connect" or with a "Base Curve".
ConnectedElecSchObjects
property in object ElecSchematicObject
This method returns the collection of Electrical Schematic Connected Objects.
ConnectionProperty
property in object ABQFastenedPair
This property has been deprecated.
ConnectionProperty
property in object ABQSurfaceToSurfaceContact
Sets or returns the connection property in a contact pair.
ConnectionProperty
property in object ABQFastenedConnectionEnhancement
Sets or returns the connection property.
Connections
method in object Product
Returns the product's constraints.
ConnectorName
property in object PspConnector
Returns or sets name of the connector.
ConnectorName
property in object EHMInsertionActPlugMapViewData
Gets ConnectorName.
ConnectorPartNumber
property in object EHMInsertionActPlugMapViewData
Gets Connector Part Number.
ConnectorRefDesignator
property in object EHMInsertionActPlugMapViewData
Gets Connector Reference Designator.
ConnectorSubType
property in object EHMInsertionActPlugMapViewData
Gets Connector Sub Type.
ConnectorType
property in object EHMInsertionActPlugMapViewData
Gets Connector Type.
Connectors
property in object PspConnectable
Returns a list of connectors of the object.
Connectors
property in object PspPhsyicalProduct
Returns a list of Part connectors of the object.
Connex
property in object HybridShapeTrim
Gets or sets connected mode.
ConstRadEdgeFillet
object
Represents the edge fillet shape with a constant radius.
ConstantLengthMode
property in object HybridShapeExtrapol
Returns or sets the constant distance mode in case of Length extrapolation limit.
Constraint
object
A geometric constraint set for geometric elements of a part, a sketch, or a product.
Constraint
property in object HybridShapeFill
Returns or sets the passing point for the Fill.
ConstraintCreationMode
property in object AsmConstraintSettingAtt
Returns or sets the constraint creation setting parameter.
ConstraintSatisfaction
object
Represents the set of equation.
Constraints
object
A collection of all geometric constraints set on a part, a sketch, or a product.
Constraints
property in object Part
Returns the collection object containing the part constraints.
Constraints
property in object Sketch
Returns the list of constraints included in the sketch.
Constraints
property in object Optimization
Returns the collection of optimization constraints.
ConstraintsInGeometry
property in object PartInfrastructureSettingAtt
Returns or sets the "ConstraintsInGeometry" parameter.
ConstraintsNodeInTree
property in object PartInfrastructureSettingAtt
Returns or sets the "ConstraintsNodeInTree" parameter.
ConstraintsSimul
property in object HtsGeneralSettingAtt
Returns or sets the ConstraintsSimul parameter.
Construction
property in object Geometry2D
ContactElecBarrelDiameter
property in object EHMInsertionActPlugMapViewData
Gets Contact Elec Barrel Diameter.
ContactName
property in object EHMInsertionActPlugMapViewData
Gets Contact Name.
ContactPartNumber
property in object EHMInsertionActPlugMapViewData
Gets Contact Part Number.
ContactPrint
property in object ABQJob
Returns or sets whether contact constraint data are printed.
ContactRefDesignator
property in object EHMInsertionActPlugMapViewData
Gets Contact Reference Designator.
ContactStiffness
property in object ABQMechConnBehavior
Sets or returns the contact stiffness type hard contact pressure overclosure.
ContactStiffnessScaleFactorValue
property in object ABQMechConnBehavior
Sets or returns the contact stiffness scale factor value in a mechanical connection.
ContactStiffnessValue
property in object ABQMechConnBehavior
Sets or returns the contact stiffness value for hard contact pressure overclosure.
ContactStiffness_Type
enum
Contact stiffness types.
ContactSubType
property in object EHMInsertionActPlugMapViewData
Gets Contact Sub Type.
ContactType
property in object EHMInsertionActPlugMapViewData
Gets Contact Type.
Context
property in object HybridShapeLoft
Returns or sets the context on Loft feature.
Context
property in object HybridShapeRevol
Returns or sets the context on Revolve feature.
Context
property in object Relation
Returns the context of the parameter.
Context
property in object Parameter
Returns the context of the parameter : a part, a product, a drafting, a process, depending where the parameter is.
Context
property in object Dressup
Returns the context product on which the mechanism is defined.
Context
property in object HybridShapeExtrude
Returns or sets the context on Extrude feature.
Context
property in object HybridShapeSweepLine
Returns or sets the context on Sweep feature.
Context
property in object HybridShapeSweepCircle
Returns or sets the context on Sweep feature.
Context
property in object HybridShapeSweepExplicit
Returns or sets the context on Sweep feature.
ContextualFeaturesSelectableAtCreation
property in object PartInfrastructureSettingAtt
Returns or sets the "ContextualFeaturesSelectableAtCreation" parameter.
Continuity
property in object Curve2D
Returns the highest level of geometric continuity the curve possesses.
Continuity
property in object HybridShapeFill
Returns or sets the continuity between the support and fill.
Continuity
property in object HybridShapeHealing
Returns or sets the continuity type of the healing.
ContinuityType
property in object HybridShapeBump
Returns or sets the continuity type .
ContinuityType
property in object HybridShapeExtrapol
Returns or sets the continuity type between extrapolated element and extrapolation.
Contour
property in object HybridShapeExtremumPolar
returns or sets the input contour.
ContoursCount
property in object ManufacturingPrismaticMachiningArea
Retreives the number of Contour of a Manufacturing Prismatic Machining Area.
ControlPoint2D
object
Class defining a spline control point in 2D Space.
ControledRadius
object
Interface for accessing Controled Radius modifier on a linear TPS (ASME norm only).
ControledRadius
method in object Annotation
Get the annotation on the ControledRadius interface.
ConvSpeed
property in object Optimization
Returns or sets the convergence speed for some gradients and the simulated annealing.
ConversionTechnology
property in object MultiCADSettingAtt
Conversion_Table
property in object InteropSettingAtt
Retrieves the location of the "Characters Equivalence Table Path" setting parameter.
ConvertArrangementProductToProduct
method in object ArrWorkbench
This method converts an ArrangementProduct back to a Product.
ConvertFromMKS
method in object Unit
Convert the initial value (expressed in MKS unit) in its equivalent in the current unit.
ConvertFromStorageUnit
method in object Unit
Convert the initial value (expressed in storage unit) in its equivalent in the current unit.
ConvertNRLToXML
method in object OLPTranslator
ConvertProductToArrangementProduct
method in object ArrWorkbench
This method converts a Product to an ArrangementProduct.
ConvertToMKS
method in object Unit
Convert the initial value in its equivalent in MKS unit.
ConvertToStorageUnit
method in object Unit
Convert the initial value in its equivalent in storage unit.
ConvertXMLToNRL
method in object OLPTranslator
CoordXValue
property in object HybridShapeTranslate
Returns or sets the translate X coordinate value.
CoordYValue
property in object HybridShapeTranslate
Returns or sets the translate Y coordinate value.
CoordZValue
property in object HybridShapeTranslate
Returns or sets the translate Z coordinate value.
Copy
method in object Selection
Copies, in a copy and paste operation.
Copy
method in object ProductScene
Creates another Product-Scene from the current one with the possibility to have a different mode.
CopyDirectory
property in object GlobalStatisticsSettingAtt
Returns or sets the path of the copy directory.
CopyFile
method in object FileSystem
Copies a file from one location to another.
CopyFolder
method in object FileSystem
Recursively copies a folder from one location to another.
CopyLinksTo
method in object DrawingViewGenerativeLinks
Copies the links of the drawing view.
CopyMode
property in object DesignTable
Returns or sets whether the data contained in the file must be included inside the CATIA model.
CopyRenderingDataFrom
method in object Material
Copy rendering data from a material to the current material.
CopyTagGroup
method in object TagGroupFactory
CornerRadiusValue
property in object HybridShape3DCurveOffset
Returns or sets the Corner Radius Value.
CornerRounding
property in object MoveHomeAct
This property returns and sets the Corner Rounding for the move activity.
CornerRounding
property in object MoveToPostureActivity
CornerRounding
property in object MoveJointsAct
This property returns and sets the Corner Rounding for the activity.
CornerTensionValue
property in object HybridShape3DCurveOffset
Returns or sets the Corner Tension Value.
CornerType
property in object HybridShapeCorner
Returns or sets the Corner Type.
Correct
method in object ExpertCheckRuntime
Applies the "correction" function on failed elements.
CorrectFunction
property in object ExpertCheckRuntime
Returns or sets the body to be called in order to correct the check.
CorrectFunctionComment
property in object ExpertCheckRuntime
Returns or sets the comment of the correct function of the check.
CorrectFunctionType
property in object ExpertCheckRuntime
Returns or sets the type of the body to be called in order to correct the check.
CorrectionMode
property in object HybridShapeCurveSmooth
Returns or sets the correction mode (threshold, point, tangency or curvature) applied to the smoothed curve.
CorrectorCount
property in object ManufacturingTool
Retreive the number of correctors of a Manufacturing tool.
Count
property in object Collection
Returns the number of objects in the collection.
Count
property in object Selection
Count
method in object Outputs
This method returns the no.
Count
property in object MfgAssembly
Count
property in object PspListOfBSTRs
Returns the number of character strings in the list.
Count
property in object PspListOfLongs
Returns the number of long integers in the list.
Count
property in object PspListOfObjects
Returns the number of objects in the list.
Count
property in object PspListOfDoubles
Returns the number of doubles in the list.
Count
property in object SchListOfBSTRs
Returns the number of character strings in the list.
Count
property in object SchListOfLongs
Returns the number of long integers in the list.
Count
property in object SchListOfObjects
Returns the number of objects in the list.
Count
property in object SchListOfDoubles
Returns the number of doubles in the list.
Count
property in object StiDBChildren
Returns the Number of Children currently gathered in CATIAStiDBChildren.
Count2
property in object Selection
Returns the number of SelectedElement objects contained by the current selection.
CountActiveLights
method in object RenderingShooting
Returns the number of active light for the shooting.
CountByAssignmentType
method in object Items
This method returns the Number of items that assocated with the activity with given Assignment Type.
CountExplicit
method in object Group
Returns the number of products in the group.
CountExtract
method in object Group
Returns the number of products which can be extracted from the group.
CountFail
property in object ExpertReportObjects
Returns the number of failed tuples in the failed tuples collection.
CountInvert
method in object Group
Returns the number of terminal node products which cannot be extracted from the group.
CountObject
method in object Marker3D
Returns the number of objects which are linked to the marker 3D.
CountObject
method in object Hyperlink
Returns the number of Url which are linked to the Hyperlink.
CountSucceed
property in object ExpertReportObjects
Returns the number of succeeded tuples in the succeeded tuples collection.
CounterSunkMode
property in object Hole
Returns the mode of a countersunk hole .
Coupling
property in object HybridShapeBlend
Returns or sets the type of coupling between the limits of the blend.
Create
method in object FunctScripts
Create a FunctScript.
Create
method in object FunctionalObjects
Creates a FunctionalObject.
Create
method in object FunctionalActions
Create a FunctionalAction.
Create
method in object FunctAssociations
Create a FunctAssociation.
Create
method in object FunctionalVariants
Create a FunctionalVariant.
Create
method in object FunctActionsGroups
Create a Group of Actions.
Create2DAppZone
method in object SchApp2DZoneFrom3DZone
Create an Application Zone.
Create2DLayout
method in object Layout2DFactory
Create the 2DLayout associated to the 3D mechanical feature tha implement this interface.
CreateAfterOperation
method in object RobotTask
Creates Operation as a child of Robot Task.
CreateAllMachinableAreaFeaturesFromTechResultsOfUDF
method in object ManufacturingView
Creates Machinable feature using TR of UDF.
CreateAnalysisData
method in object Material
Create a default analysis material on the current material.
CreateAssociativeUseEdges
property in object Layout2DSettingAtt
Returns the CreateAssociativeUseEdges parameter.
CreateAutoWalk
method in object HumanActsFactory
Returns newly created AutoWalkActivity.
CreateAutoWalk
method in object HumanActivityGroupFactory
Returns newly created AutoWalkActivity.
CreateBoard
method in object PCBWorkbench
Allows to create a Board.
CreateBoolean
method in object Parameters
Creates a boolean parameter and adds it to the part's collection of parameters.
CreateCallTask
method in object RobotTask
CreateCapture
method in object CaptureFactory
Create a Capture.
CreateCatalogFromLibrary
method in object CatalogDocument
Creates a catalog from a V4 library.
CreateCatalogFromcsv
method in object CatalogDocument
Creates a catalog from a csv file.
CreateChapterFromDesignTable
method in object CatalogDocument
Creates a chapter in the current catalog document where keywords correspond to parameters of the Design Table and add the descriptions corresponding to whole configurations of the Design Table.
CreateCheck
method in object Relations
Creates a check relation and adds it to the part's collection of relations.
CreateCheck
method in object ExpertRuleSet
Creates a check and adds it to the RuleSet.
CreateChild
method in object Activity
This method creates a new child activity of the requested type.
CreateCircle
method in object Factory2D
Creates and returns a 2D circle arc.
CreateClosedCircle
method in object Factory2D
Creates and returns a closed 2D circle.
CreateClosedEllipse
method in object Factory2D
Creates and returns a closed 2D ellipse.
CreateCollisionFreeWalkBwdOnArrArea
method in object HumanActsFactory
Returns newly created Collision free Walk Backward Activity on Arrangement Area.
CreateCollisionFreeWalkBwdOnArrArea
method in object HumanActivityGroupFactory
Returns newly created Collision free Walk Backward Activity on Arrangement Area.
CreateCollisionFreeWalkBwdOnPlane
method in object HumanActsFactory
Returns newly created Collision free Walk Backward Activity.
CreateCollisionFreeWalkBwdOnPlane
method in object HumanActivityGroupFactory
Returns newly created Collision free Walk Backward Activity.
CreateCollisionFreeWalkFwdOnArrArea
method in object HumanActsFactory
Returns newly created Collision free Walk Forward Activity.
CreateCollisionFreeWalkFwdOnArrArea
method in object HumanActivityGroupFactory
Returns newly created Collision free Walk Forward Activity.
CreateCollisionFreeWalkFwdOnPlane
method in object HumanActsFactory
CreateCollisionFreeWalkFwdOnPlane
method in object HumanActivityGroupFactory
CreateComponent
method in object PCBWorkbench
Allows to create a Component.
CreateComponentInst
method in object SchComponent
Create a component instance.
CreateCompositesData
method in object CompositesMaterial
Create a default composites properties on the current material.
CreateConstraintsSatisfaction
method in object Optimizations
Returns a set of equations.
CreateControlPoint
method in object Factory2D
Creates and returns a 2D spline control point.
CreateCutback
method in object StrMember
Creates a cutback object between two member objects.
CreateDatum
method in object AnnotationFactory
Create a Datum Feature.
CreateDatumReferenceFrame
method in object AnnotationFactory
Create a Reference Frame (DRF).
CreateDatumTarget
method in object AnnotationFactory
Create a Datum Target.
CreateDesignTable
method in object Relations
Creates a design table based on a file organized in an vertical way and adds it to the part's collection of relations.
CreateDimension
method in object Parameters
Creates a user dimension and adds it to the part's collection of parameters.
CreateDocument
method in object SchSession
Create a document with Schematic context.
CreateEllipse
method in object Factory2D
Creates and returns a 2D ellipse arc.
CreateEvoluateDatum
method in object AnnotationFactory
Create a Datum Feature.
CreateEvoluateText
method in object AnnotationFactory
Create a Text.
CreateFile
method in object FileSystem
Creates a file and returns the associated file object.
CreateFilter
method in object Document
Creates a new visualization filter from a name and a definition.
CreateFlagNote
method in object AnnotationFactory
Create a FlagNote.
CreateFolder
method in object FileSystem
Creates a folder and returns the associated folder object.
CreateFormula
method in object Relations
Creates a formula relation and adds it to the part's collection of relations.
CreateGRRCntr
method in object SchGRRFactory
Create the graphical representation of a Schematic Connector.
CreateGRRGroup
method in object SchGRRFactory
Create the graphical representation of a Schematic Group.
CreateGRRRoute
method in object SchGRRFactory
Create the graphical representation of a Schematic Route.
CreateGRRRouteEllipse
method in object SchGRRFactory
Create the graphical representation of a Schematic Route Ellipse.
CreateGRRZone
method in object SchGRRFactory
Create the graphical representation of a Schematic Zone.
CreateGenericAccuracyProfile
method in object RobControllerFactory
Creates a Generic Accuracy Profile.
CreateGenericAction
method in object GenericActionFactory
CreateGenericMotionProfile
method in object RobControllerFactory
Creates a Generic Motion Profile.
CreateGenericObjFrameProfile
method in object RobControllerFactory
Creates a Generic Object-Frame Profile.
CreateGenericToolProfile
method in object RobControllerFactory
Creates a Generic Tool Profile.
CreateGroup
method in object PspAppFactory
Creates a group in the current Product.
CreateHorizontalDesignTable
method in object Relations
Creates a design table based on a file organized in an horizontal way and adds it to the part's collection of relations.
CreateHumanActivityGroup
method in object HumanActsFactory
Returns newly created HumanActivityGroupActivity.
CreateHumanCallTask
method in object HumanActsFactory
Returns newly created HumanCallTask.
CreateHumanTask
method in object HumanProgram
Returns newly created HumanTask.
CreateHyperbola
method in object Factory2D
Creates and returns a hyperbola.
CreateInteger
method in object Parameters
Creates an integer parameter and adds it to the part's collection of parameters.
CreateIntersection
method in object Factory2D
Creates and returns the intersection of an object with the sketch.
CreateIntersections
method in object Factory2D
Creates and returns the possible intersections of an object with the sketch.
CreateLaw
method in object Relations
Creates a law relation and adds it to the part's collection of relations.
CreateLine
method in object Factory2D
Creates and returns a 2D line.
CreateLineFromVector
method in object Factory2D
Creates and returns a 2D line.
CreateLink
method in object Activity
This method creates a link from the current activity to another activity.
CreateList
method in object Parameters
Creates a list parameter and adds it to the part's collection of parameters.
CreateListOfBSTRs
method in object PspTempListFactory
Returns a new empty list of strings.
CreateListOfBSTRs
method in object SchTempListFactory
This method returns a new empty list of strings.
CreateListOfDoubles
method in object PspTempListFactory
Returns a new empty list of doubles.
CreateListOfDoubles
method in object SchTempListFactory
This method returns a new empty list of doubles.
CreateListOfLongs
method in object PspTempListFactory
Returns a new empty list of long integers.
CreateListOfLongs
method in object SchTempListFactory
This method returns a new empty list of long integers.
CreateListOfObjects
method in object PspTempListFactory
Returns a new empty list of objects.
CreateListOfObjects
method in object SchTempListFactory
This method returns a new empty list of objects.
CreateLoadParameters
method in object MHIOpenAccess
CreateLocalReference
method in object SchComponent
Make a local component reference in another document by copying an existing one in the current document.
CreateMOfromReport
method in object ManufacturingProgram
Create a list of Operation in a Manufacturing Program, of a specified type.
CreateMachine
method in object ManufacturingSetup
Initialise the Manufacturing Machine linked to a Manufacturing Setup.
CreateMfgAssembly
method in object MfgAssemblyFactory
Creates the created manufacturing assembly.
CreateMoveToPosture
method in object HumanActsFactory
Returns newly created MoveToPostureActivity.
CreateMoveToPosture
method in object HumanActivityGroupFactory
Returns newly created MoveToPostureActivity.
CreateNetwork
method in object SchBaseFactory
Create schematic networks for query.
CreateNewSheetFrom
property in object DraftingSettingAtt
Returns the CreateNewSheetFrom parameter.
CreateNonSemanticDimension
method in object AnnotationFactory
Creates a non semantic Dimension specification.
CreateOperation
method in object RobotTask
Creates Operation as a child of Robot Task.
CreateOptimization
method in object Optimizations
Creates an empty optimization.
CreatePanel
method in object PCBWorkbench
Allows to create a panel.
CreateParabola
method in object Factory2D
Creates and returns a parabola.
CreatePick
method in object HumanActsFactory
Returns newly created Pick Activity.
CreatePick
method in object HumanActivityGroupFactory
Returns newly created Pick Activity.
CreatePlace
method in object HumanActsFactory
Returns newly created Place Activity.
CreatePlace
method in object HumanActivityGroupFactory
Returns newly created Place Activity.
CreatePoint
method in object Factory2D
Creates and returns a 2D point.
CreatePosition
method in object FunctionalDescription
Create a Position.
CreateProfileInstance
method in object ParameterProfilesFactory
Instantiates a particular profile type.
CreateProgram
method in object Relations
Creates a program relation and adds it to the part's collection of relations.
CreateProjection
method in object Factory2D
Creates and returns the projection of an object on the sketch.
CreateProjections
method in object Factory2D
Creates and returns the possible projections of an object on the sketch.
CreateProxy
method in object FunctionalObjects
Creates a FunctionalObjectProxi.
CreateReal
method in object Parameters
Creates a real parameter and adds it to the part's collection of parameters.
CreateReferenceFromBRepName
method in object Part
Creates a reference from a GenericNaming label.
CreateReferenceFromGeometry
method in object AnalysisManager
Creates a reference from a geometry.
CreateReferenceFromName
method in object Document
Creates a reference from a GenericNaming label.
CreateReferenceFromName
method in object Part
Creates a reference from a GenericNaming label.
CreateReferenceFromName
method in object Product
Creates a reference from a name.
CreateReferenceFromObject
method in object Part
Creates a reference from a operator.
CreateReferenceFromObject
method in object AnalysisManager
Creates a reference from an analysis object.
CreateRenderingData
method in object Material
Create a default rendering material on the current material.
CreateRobotMotion
method in object Operation
Creates Robot Motion as a child of Operation.
CreateRobotTask
method in object RobotTaskFactory
CreateRoughness
method in object AnnotationFactory
Create a Roughness.
CreateRouteAndConnectToObjects
method in object SchBaseFactory
Create a route and connect its extremity connectors to input objects.
CreateRouteSymbol
method in object SchGRRRoute
Place a symbol on the route.
CreateRule
method in object ExpertRuleSet
Creates a rule and adds it to the RuleSet.
CreateRuleBase
method in object Relations
Creates a rulebase.
CreateRuleSet
method in object ExpertRuleSet
Creates a RuleSet and adds it to the RuleSet.
CreateSchCompGroup
method in object SchBaseFactory
Create a Schematic Component Group object.
CreateSchComponent
method in object SchBaseFactory
Create a Schematic Component reference.
CreateSchRouteByPoints
method in object SchBaseFactory
Create a Schematic Route object with a list of points.
CreateSchRouteByPrim
method in object SchBaseFactory
Create a Schematic Route object with primitives.
CreateSchZone
method in object SchBaseFactory
Create a Schematic Zone object.
CreateSelectionSet
method in object SelectionSets
Creates a new Selection Set.
CreateSemanticDimension
method in object AnnotationFactory
Creates a semantic Dimension specification.
CreateSendTo
method in object Application
Creates a Send TO.
CreateSet
method in object ParameterSets
Creates a set of parameters and appends it to the parameter set which corresponds to this collection.
CreateSetOfEquations
method in object Relations
Creates a set of equations.
CreateSetOfParameters
method in object Parameters
Creates a set of parameters and appends it to argument iFather.
CreateSetOfRelations
method in object Relations
Creates a set of relations and appends it to a parent object.
CreateShopOrder
method in object OrderGenerator
CreateShopOrder2
method in object OrderGenerator
Create Shop Order using XML as SOI input.
CreateShot
method in object Shots
Creates a new shot and adds it to the Shots collection.
CreateSideStepOnArrArea
method in object HumanActsFactory
Returns newly created Side-Step Activity.
CreateSideStepOnArrArea
method in object HumanActivityGroupFactory
Returns newly created Side-Step Activity.
CreateSideStepOnPlane
method in object HumanActsFactory
Returns newly created Side-Step Activity.
CreateSideStepOnPlane
method in object HumanActivityGroupFactory
Returns newly created Side-Step Activity.
CreateSpecificShot
method in object Shots
Creates a new shot of a specific type and adds it to the Shots collection.
CreateSpline
method in object Factory2D
Creates and returns a 2D b-spline.
CreateStandardThreadDesignTable
method in object Hole
Creates a Standard Thread design table .
CreateStandardThreadDesignTable
method in object Thread
Creates a Standard Thread design table .
CreateState
method in object DNB3DStateMgmt
CreateString
method in object Parameters
Creates a string parameter and adds it to the part's collection of parameters.
CreateTag
method in object AMPPath
Function to create an AMPTag.
CreateTag
method in object TagGroup
CreateTag
method in object TagFactory
Creates a Tag.
CreateTagGroup
method in object TagGroupFactory
Creates a TagGroup.
CreateTagGroupInDoc
method in object TagGroupFactory
Creates a TagGroup with the given name in the document.
CreateTagWithReference
method in object AMPPath
Function to create an AMPTag with reference to an already existing AMPTag.
CreateText
method in object AnnotationFactory
Create a Text.
CreateTextNOA
method in object AnnotationFactory
CreateTextOnAnnot
method in object AnnotationFactory
Create a Text grouped to an annotation.
CreateToleranceWithDRF
method in object AnnotationFactory
Create a Tolerance With a Reference Frame DRF.
CreateToleranceWithoutDRF
method in object AnnotationFactory
Create a Tolerance Without a Reference Frame (DRF).
CreateUserStandardDesignTable
method in object Hole
Creates a UserStandard Thread design table .
CreateUserStandardDesignTable
method in object Thread
Creates a UserStandard Thread design table .
CreateView
method in object TPSViewFactory
Creates a view.
CreateWalkBwdOnArrArea
method in object HumanActsFactory
Returns newly created Walk Backward Activity on Arrangement Area.
CreateWalkBwdOnArrArea
method in object HumanActivityGroupFactory
Returns newly created Walk Backward Activity on Arrangement Area.
CreateWalkBwdOnPlane
method in object HumanActsFactory
Returns newly created Walk Backward Activity.
CreateWalkBwdOnPlane
method in object HumanActivityGroupFactory
Returns newly created Walk Backward Activity.
CreateWalkFwdOnArrArea
method in object HumanActsFactory
Returns newly created Walk Forward Activity.
CreateWalkFwdOnArrArea
method in object HumanActivityGroupFactory
Returns newly created Walk Forward Activity.
CreateWalkFwdOnPlane
method in object HumanActsFactory
CreateWalkFwdOnPlane
method in object HumanActivityGroupFactory
CreationMode
property in object HybridShapeScaling
Returns or sets the creation mode(creation or modification).
CreationMode
property in object HybridShapeAffinity
Returns or sets the creation mode(creation or modification).
CreationMode
property in object HybridShapeSymmetry
Returns or sets the creation mode(creation or modification).
CreationMode
property in object HybridShapeAxisToAxis
Returns or sets the creation mode(creation or modification).
CrossingPoint
property in object HybridShapeCircleCtrPt
Returns or sets the circle passing point.
CrvMod
property in object IgesSettingAtt
Returns or sets the Export BSpline mode setting parameter value.
CumulateMode
property in object DrawingDimension
Returns cumulate mode or not.
CumulationMode
property in object GeneralStatisticsSettingAtt
Returns or sets the cumulation state of the statistics thematic.
CuredThickness
property in object CompositesMaterial
returns or set the cured thicknes defined in Composites tab in mm.
Current
property in object Capture
Retrieves the Capture state, current or Not.
CurrentAnchorPointName
property in object StrMember
Returns or sets the current anchor point used to locate the section on the support object.
CurrentAssoc
property in object FunctMultiRepMgr
Get the CurrentAssoc.
CurrentDescription
property in object FunctionalDocument
Returns the Current Description.
CurrentFilter
property in object Document
Returns or sets the current visualization filter.
CurrentLayer
property in object Document
Returns or sets the current layer.
CurrentPos
property in object HtsCCPSettingAtt
Returns or sets the CurrentPos parameter.
CurrentScript
property in object FunctGenScriptMgr
Get the CurrentScript.
CurrentValue
property in object MechanismCommand
Returns the current value for a command.
CurrentValue1
property in object Joint
Gets the joint current value for first parameter.
CurrentValue2
property in object Joint
Gets the joint current value for second parameter.
Curvature
property in object ControlPoint2D
CurvatureRadius
property in object AutoFillet
Returns the Curvature radius.
CurvatureThreshold
property in object HybridShapeExtract
Returns or sets the CurvatureThreshold.
CurvatureThreshold
property in object HybridShapeCurveSmooth
Returns or sets the CurvatureThreshold.
CurvatureThresholdActivity
property in object HybridShapeExtract
Returns or sets the CurvatureThresholdActivity.
CurvatureThresholdActivity
property in object HybridShapeCurveSmooth
Returns or sets the CurvatureThresholdActivity.
Curve
property in object HybridShapeLineAngle
Role : Get the reference curve.
Curve
property in object HybridShapePlane1Curve
Role : Get the planar curve.
Curve
property in object HybridShapePlaneNormal
Role : Get the curve to which the plane is to be normal.
Curve
property in object HybridShapeLineTangency
Returns or Sets the curve to which the line will be tangent.
Curve
property in object HybridShapePointOnCurve
Returns or sets the curve onto which the point is or should be created.
Curve
property in object HybridShapePointTangent
Returns or Gets the supporting curve.
Curve1
property in object HybridShapeLineBiTangent
Returns or Sets the first tangency curve lying on the support surface.
Curve1
property in object HybridShapeCircleTritangent
Returns or sets the first curve to which the circle is or will be tangent.
Curve1
property in object HybridShapeCircleBitangentPoint
Returns or sets the first curve to which the circle is or will be tangent.
Curve1
property in object HybridShapeCircleBitangentRadius
Returns or sets the first curve to which the circle is or will be tangent.
Curve2
property in object HybridShapeCircleTritangent
Returns or sets the second curve to which the circle is or will be tangent.
Curve2
property in object HybridShapeCircleBitangentPoint
Returns or sets the second curve to which the circle is or will be tangent.
Curve2
property in object HybridShapeCircleBitangentRadius
Returns or sets the second curve to which the circle is or will be tangent.
Curve2D
object
Class defining a curve in 2D Space.
Curve3
property in object HybridShapeCircleTritangent
Returns or sets the thirs curve to which the circle is or will be tangent.
CurveFastener
object
Interface DELMIACurveFastener DELMIACurveFastener represent body in white fasteners of type curve.
CurveFasteners
method in object FastenerWorkBench
CurveOffseted
property in object HybridShapeCurvePar
Returns or sets the offset curve of the curve parameter object.
CurveParLaw
property in object HybridShapeCurvePar
Returns or sets the offset law.
CurveParType
property in object HybridShapeCurvePar
Returns or sets the corner type.
CurveToOffset
property in object HybridShape3DCurveOffset
Returns or sets the curve to offset.
CurveToSmooth
property in object HybridShapeCurveSmooth
Returns or sets the curve to smooth.
CustomBackgroundImage
property in object AnalysisReportingSettingAtt
Returns or sets the CustomBackgroundImage parameter.
CustomImageFormat
property in object AnalysisReportingSettingAtt
Returns or sets the CustomImageFormat parameter.
CustomImageHeight
property in object AnalysisReportingSettingAtt
Returns or sets the CustomImageHeight parameter.
CustomImageWidth
property in object AnalysisReportingSettingAtt
Returns or sets the CustomImageWidth parameter.
Cut
method in object Selection
Cuts, in a cut and paste operation.
CutMode
property in object Section
Returns or sets the cutting mode of the section.
Cutback
property in object StrMemberExtremity
Returns the cutback object.
CuttingElem
property in object HybridShapeSplit
Returns or sets the cutting element.
CycleTime
property in object Activity
This property returns and set the time cyle on the current activity.
CylinderLightHeight
property in object RenderingLight
Returns or sets the cylinder light area radius.
CylinderLightRadius
property in object RenderingLight
Returns or sets the cylinder light area radius.
CylindricalFace
object
2-D boundary with a cylindrical geometry.
cf1
property in object ABQConcentratedForce
ets or returns the concentrated force component in the 1-direction.
cf2
property in object ABQConcentratedForce
ets or returns the concentrated force component in the 2-direction.
cf3
property in object ABQConcentratedForce
ets or returns the concentrated force component in the 3-direction.
cm1
property in object ABQConcentratedForce
ets or returns the concentrated moment component in the 1-direction.
cm2
property in object ABQConcentratedForce
ets or returns the concentrated moment component in the 2-direction.
cm3
property in object ABQConcentratedForce
ets or returns the concentrated moment component in the 3-direction.
comp1
property in object ABQGravity
ets or returns the gravity component in the 1-direction.
comp2
property in object ABQGravity
ets or returns the gravity component in the 2-direction.
comp3
property in object ABQGravity
ets or returns the gravity component in the 3-direction.
create_pcbhole
method in object PCBBoard
This method allows to add a Pcb hole to a board or a panel.
create_pcbpattern
method in object PCBBoard
This method allows to add a Pcb pattern of hole to a board or a panel.
create_zone
method in object PCBBoard
This method allows to add a constraint area to a board.
cropBottom
property in object DrawingPicture
Returns or sets the cropBottom of the drawing picture.
cropLeft
property in object DrawingPicture
Returns or sets the cropLeft of the drawing picture.
cropRight
property in object DrawingPicture
Returns or sets the cropRight of the drawing picture.
cropTop
property in object DrawingPicture
Returns or sets the cropTop of the drawing picture.
D
property in object HybridShapePlaneEquation
Gets D coefficient for plane equation.
D5Device
object
Interface representing a D5 Device.
DLNameCreationRight
property in object DLNameSettingAtt
Returns or set the right to create new DLNames.
DLNameSettingAtt
object
Interface to handle the DLNames.
DMOOffset
object
DMOOffsets
object
DMOThickness
object
DMOThicknesses
object
DMUClashPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Interference (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUCut3DPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for 3D Cut (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUDataFlow
object
Allows the DMU Data Flow Management within the DMU Navigator environment.
DMUDataFlow
property in object NavigatorWorkbench
Returns the DMU DataFlow object.
DMUDistancePreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Distance (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUFreeSpacePreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Free Space (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUGroupPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Group (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUGroupPreviewHiddenObjectsDisplayMode
property in object N4DNavigatorSettingAtt
Returns or sets the mode for the display of hidden objects in DMU Group Preview.
DMUGroupPreviewHiddenObjectsLowInt
property in object N4DNavigatorSettingAtt
Returns or sets the Low Intensity mode for the display of hidden objects in DMU Group Preview.
DMUGroupPreviewHiddenObjectsOpacity
property in object N4DNavigatorSettingAtt
Returns or sets the opacity for the display of hidden objects in DMU Group Preview.
DMUGroupPreviewHiddenObjectsPick
property in object N4DNavigatorSettingAtt
Returns or sets the pick mode for the display of hidden objects in DMU Group Preview.
DMUMergerPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Merger (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUOffsetPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Offset (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUReviewName
property in object N4DNavigatorSettingAtt
Returns or sets the default name for the DMU Reviews (oValue, the DMU Review name).
DMUSectionPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Section (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUShuttlePreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Shuttle (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUSilhouettePreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Silhouette (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUSimplifPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Simplification (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUSweptVolPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Swept Volume (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUThicknessPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Thickness (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUTolSettingAtt
object
Represents the DMU Tolerancing setting controller object.
DMUTrackMoveMode
enum
The movement mode for tracks.
DMUVibrationVolPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Vibration volume (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DMUWrappingPreview
property in object N4DNavigatorSettingAtt
Returns or sets the preview activation state for Wrapping (TRUE the preview window is automatically displayed, FALSE the preview window is not displayed).
DNB3DState
object
DNB3DStateMgmt
object
DNB3DStatePositionManagement
property in object ProcessDocument
Retrieves the interface which manages the 3D state positions.
DNBActBehaviorType
enum
The Behavior setting attribute range of values.
DNBAnalysisLevel
enum
The Analysis Level setting attribute range of values.
DNBAssignStatus
enum
enum DNBAssignStatus It represents the result status of the fastener assignment action to process.
DNBAttachment
object
Interface representing xxx.
DNBAttachmentFactory
object
Interface representing xxx.
DNBFastenerItemServices
object
DNBHlnkBehaviorType
enum
The Hyperlink Behavior setting attribute range of values.
DNBIAMfgAssemblyType
enum
This file defines the possible types of a Manufacturing Assembly.
DNBSimGraphUpdateMode
enum
The PSGraphicUpdate setting attribute range of values.
DNBSimInitStateAttr
enum
Specifies which Initial State attributes will be managed.
DNBSimNavigationMode
enum
The analysis SimNavigation Mode setting attribute range of values.
DNBTCPTraceLegends
enum
Possible types of TCP Trace legends.
DNBTCPTraceReps
enum
Possible types of TCP Trace representations.
DNBVisualizationMode
enum
The analysis Visualization Mode setting attribute range of values.
DOFState
object
Interface representing a Basic Device from which to get DOFState.
DateFormat
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the date format field.
Datum
property in object DatumTarget
Retrieves simple datum, the target belongs to.
DatumSimple
object
Interface for Simple Datum TPS (datum entity).
DatumSimple
method in object Annotation
Get the annotation on the DatumSimple interface.
DatumTarget
object
Interface for Datum Target TPS (datum entity).
DatumTarget
method in object Annotation
Get the annotation on the DatumTarget interface.
Deactivate
method in object Constraint
Suppresses the constraint from being updated.
Deactivate
method in object Behavior
Deactivates a behavior.
Deactivate
method in object SchCompGraphic
To remove an image to an existing object.
Deactivate
method in object KnowledgeActivateObject
Deactivates the relation.
Deactivate
method in object ExpertRuleBaseComponentRuntime
Desactivates the RuleBaseComponent.
DeactivatePoint
method in object ManufacturingPattern
Deactivates a point of a Manufacturing Pattern.
DecrementTabulation
method in object ManufacturingOutput
Decrement the tabulation of the current block of text by the specified number of characters.
DedicatedFilterType
property in object Layout2DSettingAtt
Returns the DedicatedFilterType parameter.
Deduce
method in object ExpertRuleBaseRuntime
Launch a Forward chaining Solve on the current RuleBase.
DeepSearchActivation
property in object SearchSettingAtt
Returns or sets the Deep Search Activation attribute.
DefaultAnalysisFlag
property in object AnalysisGeneralSettingAtt
Retrieves if a default analysis Case will be created.
DefaultAnalysisTemplate
property in object AnalysisGeneralSettingAtt
Retrieves the name of the default analysis Case that will be created.
DefaultAnnotation
object
This interface is used to get information about default annotation.
DefaultAnnotation
method in object Annotation
Get the annotation on the DefaultAnnotation interface.
DefaultDiffuseAmbientCoefficient
property in object VisualizationSettingAtt
Returns the AmbientActivation parameter.
DefaultName
method in object ManufacturingMachine
Return the string the Type of a Machine.
DefaultPowerInputContextPriority
property in object SearchSettingAtt
Returns or sets the Default Power Input Context Priority attribute.
DefaultPowerInputContextScope
property in object SearchSettingAtt
Returns or sets the Default Power Input Context Scope attribute.
DefaultPowerInputPrefix
property in object SearchSettingAtt
Returns or sets the Default Power Input Prefix attribute.
DefaultShininess
property in object VisualizationSettingAtt
Returns the AmbientActivation parameter.
DefaultSpecularCoefficient
property in object VisualizationSettingAtt
Returns the AmbientActivation parameter.
DefaultSpeed
property in object FittingSettingAtt
DefaultStyleSheet
property in object FASReportingSettingAtt
Gets value of "OLP Robot Program Directory" parameter.
DefaultTime
property in object FittingSettingAtt
DefaultTolerance
property in object ToleranceSheetSettingAtt
Returns or sets the DefaultTolerance parameter.
DefaultWalkSpeed
property in object HtsGeneralSettingAtt
Returns or sets the DefaultWalkSpeed parameter.
DefineAuxiliaryView
method in object DrawingViewGenerativeBehavior
Defines an auxiliary drawing view.
DefineBox3DView
method in object DrawingViewGenerativeBehavior
Defines a drawing view intersected with a 3D box.
DefineBreakout
method in object DrawingViewGenerativeBehavior
Defines a breakout on the current view.
DefineBrokenView
method in object DrawingViewGenerativeBehavior
Defines a broken drawing view.
DefineCircularClippingView
method in object DrawingViewGenerativeBehavior
Defines a Circular clipping on the current view.
DefineCircularDetailView
method in object DrawingViewGenerativeBehavior
Defines a detail or a clipped drawing view.
DefineCircularExactClippingView
method in object DrawingViewGenerativeBehavior
Defines a Circular exact clipping on the current view.
DefineFrontView
method in object DrawingViewGenerativeBehavior
Defines a front drawing view.
DefineIsometricView
method in object DrawingViewGenerativeBehavior
Defines an isometric drawing view.
DefinePolygonalClippingView
method in object DrawingViewGenerativeBehavior
Defines a polygonal clipping on the current view.
DefinePolygonalDetailView
method in object DrawingViewGenerativeBehavior
Defines a detail or a clipped drawing view.
DefinePolygonalExactClippingView
method in object DrawingViewGenerativeBehavior
Defines a polygonal exact clipping on the current view.
DefineProjectionView
method in object DrawingViewGenerativeBehavior
Defines a projection drawing view.
DefineSectionView
method in object DrawingViewGenerativeBehavior
Defines a section drawing view.
DefineStandAloneSection
method in object DrawingViewGenerativeBehavior
Defines a section view without a reference view.
DefineTPSSectionView
method in object DrawingViewGenerativeBehavior
Defines a TPS section drawing view.
DefineUnfoldedView
method in object DrawingViewGenerativeBehavior
Defines a unfolded drawing view.
Definition
property in object HybridShapeLawDistProj
Returns or sets the definition curve of the law.
Definition
property in object Product
Returns or sets the product's definition.
DeformationCenter
property in object HybridShapeBump
Returns or sets the Deformation Center.
DeformationDir
property in object HybridShapeBump
Returns or sets the Deformation Direction.
DeformationDist
property in object HybridShapeBump
Returns the translate distance (CATIA Parameter).
DeformationDistValue
property in object HybridShapeBump
Returns or sets the Deformation distance (double) .
DeformationMode
property in object HybridShapeWrapSurface
Returns or sets whether the wrap surface is or should be created as a"Normal" or with a "3D" deformation mode.
Delete
method in object Selection
Deletes all selected objects.
Delete
method in object FunctScripts
Delete a FunctScript.
Delete
method in object FunctionalObjects
Deletes a FunctionalObject.
Delete
method in object FunctionalActions
Delete a FunctionalAction.
Delete
method in object FunctAssociations
Delete a FunctAssociation.
Delete
method in object FunctionalVariants
Delete a FunctionalVariant.
Delete
method in object FunctActionsGroups
Delete a Group of Actions.
DeleteCompartment
method in object PspAppFactory
Delete a compartment instance.
DeleteFile
method in object FileSystem
Deletes a file.
DeleteFolder
method in object FileSystem
Deletes a folder.
DeleteGroup
method in object PspAppFactory
Delete a group.
DeleteLogicalLine
method in object PspAppFactory
Delete a logical line instance.
DeleteObject
method in object SchBaseFactory
Delete a schematic object.
DeleteObjectForDatum
method in object HybridShapeFactory
Deletes an object within the current body.
DeleteOperations
method in object RobotTask
Deletes the required list of Operations.
DeletePart
method in object PspAppFactory
Delete a part.
DeleteProfileInstance
method in object ParameterProfilesFactory
DeleteRemoveFace
method in object ReplaceFace
Remove the face to be removed.
DeleteRobotTask
method in object RobotTaskFactory
Removes the required Robot Task.
DeleteSelectionSet
method in object SelectionSets
Deletes a Selection Set.
DeleteState
method in object DNB3DStateMgmt
DeleteTag
method in object TagGroup
DeleteTagGroup
method in object TagGroupFactory
DeleteWarningBox
property in object PartInfrastructureSettingAtt
Returns or sets the "DeleteWarningBox" parameter.
Deltmx
property in object ABQHeatTransferStep
Sets or returns the maximum temperature change to be allowed in an increment during a transient heat transfer analysis.
DemoMode
property in object LicenseSettingAtt
Retrieves or Sets the demo mode.
Density
property in object Part
Returns the part density.
Density
property in object Inertia
Returns or sets the density for the computation.
Depth
property in object Thread
Returns the thread/tap depth.
Depth
property in object ManufacturingHole
Returns the hole depth.
DepthOfFieldRadius
property in object RenderingShooting
Returns or sets the depth of field radius of confusion.
DepthOfFieldStatus
property in object RenderingShooting
Returns or sets the depth of field status of shooting.
DesactivateDefaultShape
method in object Product
Deactivate default shape.
DesactivatePosition
method in object Pattern
Allows user to desactivate an instance of the pattern.
DesactivateShape
method in object Product
Deactivate one shape.
Description
property in object ABQJob
Returns or sets the job description.
Description
property in object Activity
This property returns and set the description on the current activity.
Description
property in object ABQMechConnBehavior
Sets or returns the description.
Description
property in object ABQHeatTransferStep
Sets or returns the description of the step.
Description
property in object ABQGeneralStaticStep
eturns or sets the description of the Abaqus general static step.
Description
property in object ABQThermalConnBehavior
Sets or returns the description.
Description
property in object FunctionalObjectProxy
Get the description attached to the proxi.
Description
property in object ABQExplicitDynamicsStep
ets or returns the description of the Abaqus explicit dynamics step.
DescriptionInst
property in object Product
Returns or sets the product's description for a component product.
DescriptionRef
property in object Product
Returns or sets the product's description for a reference product.
DesignGeometriesCount
method in object ManufacturingSetup
Returns the number of design geometries from a Manufacturing Setup.
DesignMode
property in object DMUTolSettingAtt
Returns or sets the Design Mode setting parameter value.
DesignReview
property in object Export3DXmlSettingAtt
Returns or sets the Design Review activation flag.
DesignTable
object
Represents the DesignTable object.
DesignTablesCopyData
property in object KnowledgeSheetSettingAtt
Returns or sets the DesignTablesCopyData parameter.
DesignTablesSynchronization
property in object KnowledgeSheetSettingAtt
Returns or sets the DesignTablesSynchronization parameter.
Detach
method in object Dressup
Detaches an attached product from its link.
DetachFrom
method in object FunctAssociation
Delete a link to a linked object.
DetailsModeExplode
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of mode for details migration (Explode Mode) Role : Returns or sets the state of mode for details migration.
DetailsModeUsual
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of mode for details migration (Usual Mode) Role : Returns or sets the state of mode for details migration.
DetailsModeWireframe
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of mode for details migration (WireFrame Mode) Role : Returns or sets the state of mode for details migration.
DevAnalysisSettingAtt
object
Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Device Analysis Tools Options Tab page.
DeviceJointRelations
object
DeviceName
property in object Printer
Returns the printer device name.
Diagnosis
property in object Check
Returns the check diagnosis.
Diameter
property in object Hole
Returns the hole diameter.
Diameter
property in object Thread
Returns the thread/tap diameter.
Diameter
property in object AssemblyHole
Returns the hole diameter.
Diameter
property in object HybridShapeCircleCtrRad
Returns the circle diameter.
Diameter
property in object ManufacturingHole
Returns the hole diameter.
Diameter
property in object HybridShapeCircle2PointsRad
Returns the circle diameter.
Diameter
property in object HybridShapeCircleCenterAxis
Returns the circle diameter.
Diameter
property in object HybridShapeCircleCenterTangent
Returns the circle diameter.
Diameter
property in object HybridShapeCircleBitangentRadius
Returns the circle diameter.
Diameter
property in object ManufacturingToolCorrector
Gives the corrector diameter tool diameter.
DiameterMode
property in object HybridShapeCircleCtrRad
Returns or sets the DiameterMode.
DiameterMode
property in object HybridShapeCircle2PointsRad
Returns or sets the DiameterMode.
DiameterMode
property in object HybridShapeCircleCenterAxis
Returns or sets the DiameterMode.
DiameterMode
property in object HybridShapeCircleCenterTangent
Returns or sets the DiameterMode.
DiameterMode
property in object HybridShapeCircleBitangentRadius
Returns or sets the DiameterMode.
Diffuse
property in object RenderingLight
Returns or sets the light diffuse intensity of a light.
DiffuseCoefficient
property in object RenderingMaterial
Returns or sets the diffuse coefficient of a material.
DimAfterCre
property in object FTASettingAtt
Returns or sets the Dimension After Creaation parameter.
DimAfterMod
property in object FTASettingAtt
Returns or sets the Dimension After Modification parameter.
DimBeforeCre
property in object FTASettingAtt
Returns or sets the Dimension Before Creation parameter.
DimBeforeMod
property in object FTASettingAtt
Returns or sets the Dimension Before Modification parameter.
DimBlankingCre
property in object FTASettingAtt
Returns or sets the Dimension Blanking Creation parameter.
DimBlankingMod
property in object FTASettingAtt
Returns or sets the Dimension Blanking Modification parameter.
DimConfigureSnapping
property in object FTASettingAtt
Returns or sets the DimConfigureSnapping parameter.
DimConstantOffset
property in object FTASettingAtt
Returns or sets the Constant Offset parameter.
DimCreateOn
property in object FTASettingAtt
Returns or sets the DimCreateOn parameter.
DimLineGraphRep
property in object DrawingDimLine
Returns or graphic representation of dimension line.
DimLineOrientation
property in object DrawingDimLine
Returns or orientation of dimension line.
DimLinePosValue
property in object FTASettingAtt
Returns or sets the Dimension Line Position Value parameter.
DimLineReference
property in object DrawingDimLine
Returns or reference of dimension line.
DimLineRep
property in object DrawingDimLine
Returns or representation of dimension line.
DimLineType
property in object DrawingDimLine
Returns type of dimension line.
DimLineUpBaseAngle
property in object FTASettingAtt
Returns or sets the Dimension Line Up Base Angle parameter.
DimLineUpBaseLength
property in object FTASettingAtt
Returns or sets the Dimension Line Up Base Length parameter.
DimLineUpCumul
property in object FTASettingAtt
Returns or sets the Dimension Line Up Cululated parameter.
DimLineUpFunnel
property in object FTASettingAtt
Returns or sets the Dimension Line Up Funnel parameter.
DimLineUpOffsetBetDimAngle
property in object FTASettingAtt
Returns gets the DimLineUpOffsetBetDimAngle parameter.
DimLineUpOffsetBetDimLength
property in object FTASettingAtt
Returns gets the DimLineUpOffsetBetDimLength parameter.
DimLineUpOffsetToRefAngle
property in object FTASettingAtt
Returns gets the DimLineUpOffsetToRefAngle parameter.
DimLineUpOffsetToRefLength
property in object FTASettingAtt
Returns gets the DimLineUpOffsetToRefLength parameter.
DimLineUpStack
property in object FTASettingAtt
Returns or sets the Dimension Line Up Stack parameter.
DimManualPositionning
property in object FTASettingAtt
Returns or sets the Manual Positionning parameter.
DimMove2dPartCre
property in object FTASettingAtt
Returns or sets the Dimension Move 2D Creation parameter.
DimMove2dPartMod
property in object FTASettingAtt
Returns or sets the Dimension Move 2D Modification parameter.
DimMoveDimLineCre
property in object FTASettingAtt
Returns or sets the Dimension Move Dimension Line Creation parameter.
DimMoveDimLineMod
property in object FTASettingAtt
Returns or sets the Dimension Move Dimension Line Modification parameter.
DimMoveLeaderCre
property in object FTASettingAtt
Get the Dimension leader Creation parameter.
DimMoveLeaderMod
property in object FTASettingAtt
Returns gets the Dimension leader modification parameter.
DimMoveSubPart
property in object FTASettingAtt
Returns or sets the DimMoveSubPart parameter.
DimMoveValueCre
property in object FTASettingAtt
Returns or sets the Dimension Move Value Creation parameter.
DimMoveValueMod
property in object FTASettingAtt
Returns or sets the Dimension Move Value Modification parameter.
DimORunCre
property in object FTASettingAtt
Returns or sets the Dimension Over Run Creation parameter.
DimORunMod
property in object FTASettingAtt
Returns or sets the Dimension Over Run Modification parameter.
DimOriDefaultSymb
property in object FTASettingAtt
Returns or sets the Dimension Orientation Default Symbol parameter.
DimSnapping
property in object FTASettingAtt
Returns or sets the Dimension Snapping parameter.
DimStatus
property in object DrawingDimension
Returns or sets status of dimension.
DimType
property in object DrawingDimension
Returns dimension type.
Dimension
property in object Limit
Returns or sets the limit dimension.
Dimension
object
Represents the dimension parameter.
Dimension
property in object Constraint
Returns the constraint dimension.
Dimension3D
object
Dimension3D
method in object Annotation
Get the 3D Dimension on the 3D Dimension interface.
DimensionLimit
object
Represents the limit object of tolerance dimensions.
DimensionLimit
method in object Annotation
Get the annotation on the DimensionLimit interface.
DimensionLimitType
property in object DimensionLimit
Returns or sets the dimension limit type.
DimensionPattern
object
Interface to dimension pattern.
DimensionPattern
method in object Annotation
Get the annotation on the DimensionPattern interface.
Dimensions
property in object DrawingView
Returns the drawing dimension collection of the drawing view.
Dimensions
property in object Layout2DView
Returns the drawing dimension collection of the Layout2D view.
Dir
property in object HybridShapeLinePtDir
Returns or Sets the direction of the line.
Dir
property in object HybridShapeExtremumPolar
returns or sets the direction of computation.
DirectParameters
property in object ParameterSet
Returns directly aggregated parameters.
Direction
property in object HybridShapeCorner
Returns or sets the 3D corner direction.
Direction
property in object HybridShapeProject
Returns or sets the projection direction.
Direction
property in object HybridShapeExtrude
Role : To get_Direction on the object.
Direction
property in object HybridShapeAxisLine
Gets the reference direction used in computation of axis.
Direction
property in object HybridShapeCylinder
Returns or sets the direction of the cylinder object.
Direction
property in object HybridShapeExtremum
Returns or sets the direction into which the extremum is detected.
Direction
property in object HybridShapeTranslate
Returns or sets the translate direction.
Direction
property in object HybridShapeReflectLine
Returns or sets the direction used to create the cylindrical reflectline.
Direction
property in object HybridShapePointOnCurve
Returns or sets the direction along which the point is or should be created.
Direction
property in object HybridShapePointTangent
Returns or Sets the direction.
Direction
property in object HybridShape3DCurveOffset
Returns or sets the direction.
Direction
property in object HybridShapePointOnSurface
Returns or Sets the direction from the reference point in which the point is computed.
Direction1
property in object HybridShapeCombine
Returns or sets the first direction used to create the combined curve.
Direction2
property in object HybridShapeCombine
Returns or sets the second direction used to create the combined curve.
Direction2
property in object HybridShapeExtremum
Returns or sets the second direction into which the extremum is detected.
Direction3
property in object HybridShapeExtremum
Returns or sets the third direction into which the extremum is detected.
DirectionOrientation
property in object Prism
Returns the prism direction orientation.
DirectionOrientation
property in object AssemblyPocket
Returns or sets the pocket direction orientation.
DirectionSpecification
method in object HybridShapeDirection
Queries the direction specification status.
DirectionToUnfold
property in object HybridShapeUnfold
Returns or sets the direction to unfold.
DirectionType
property in object Prism
Returns the prism direction type.
DirectionType
property in object AssemblyPocket
Returns or sets the pocket direction type.
DirectoryForInputXsl
property in object ReportGenerationSheetSettingAtt
Returns or sets the DirectoryForInputXsl parameter.
Disconnect
method in object PspConnector
DisConnect the connector from another connector.
Disconnect
method in object StiEngine
Disconnects to SmarTeam Integration .
DisconnectionSettingAtt
object
Represents the base object to handle the parameters of automatic disconnection.
DiscriminationIndex
property in object HybridShapeCorner
Returns or set the discrimination index of the current corner.
DiscriminationIndex
property in object HybridShapeCircleTritangent
Return or set the discrimination index of the current circle.
DiscriminationIndex
property in object HybridShapeCircleCenterTangent
Return or set the discrimination index of the current circle.
DiscriminationIndex
property in object HybridShapeCircleBitangentPoint
Return or set the discrimination index of the current circle.
DiscriminationIndex
property in object HybridShapeCircleBitangentRadius
Return or set the discrimination index of the current circle.
DiskLightRadius
property in object RenderingLight
Returns or sets the disk light area radius.
DisplayAnlStatus
property in object AnalysisSettingAtt
Returns or sets the DisplayAnlStatus parameter.
DisplayBackAndCuttingPlane
property in object Layout2DSettingAtt
Returns the DisplayBackAndCuttingPlane parameter.
DisplayCapture
method in object Capture
Displays the Capture.
DisplayCapture2
method in object Capture
Displays the Capture with mirroring annotations management.
DisplayClippingOutline
property in object Layout2DSettingAtt
Returns the DisplayClippingOutline parameter.
DisplayCurrentScale
property in object VisualizationSettingAtt
Returns the SetStereoModeLock parameter.
DisplayCutInWireframe
property in object SectioningSettingAtt
Returns or sets the DisplayCutInWireframe parameter.
DisplayDrillList
property in object VisualizationSettingAtt
Returns the DisplayDrillList parameter.
DisplayFileAlerts
property in object Application
Returns or sets the application ability to display file alerts.
DisplayGeomOnScrolling
property in object TreeVizManipSettingAtt
Retrieves or Sets the "display geometry on scrolling" mode.
DisplayGeometryAfterCurrent
property in object PartInfrastructureSettingAtt
Returns or sets the "DisplayGeometryAfterCurrent" parameter.
DisplayImmersiveDrillViewer
property in object VisualizationSettingAtt
Returns the DisplayImmersiveDrillViewer parameter.
DisplayMode
property in object InteropSettingAtt
Retrieves or sets the state of the "Display only elements with Sensitive Attribute" setting parameter.
DisplayName
property in object Reference
Returns the name of the referenced object.
DisplayNameMode
property in object TreeTabSettingAtt
DisplayOrder
property in object TreeTabSettingAtt
DisplayProcessOrder
property in object TreeTabSettingAtt
DisplayResetButton
property in object DraftingSettingAtt
Returns the DisplayResetButton parameter.
DisplayTrailingZeros
property in object UnitsSheetSettingAtt
Returns or sets the DisplayTrailingZeros parameter.
DisplayV4Text3D
property in object InteropSettingAtt
Retrieves or sets the state of the "Display 3D elements labels" setting parameter.
Distance
object
Represents the Distance object.
Distance
property in object HybridShapeTranslate
Returns the translate distance.
DistanceConfig
property in object Constraint
Returns or sets the distance constraint configuration.
DistanceCriteria
property in object SWKIKConstraint
Returns or sets the distance criteria that will be used to evaluate success or failure of the constraint resolution.
DistanceDirection
property in object Constraint
Returns or sets the distance constraint direction.
DistanceObjective
property in object HybridShapeHealing
Returns the Distance Objective of the healing.
DistanceStep
property in object ManipSettingAtt
DistanceThreshold
property in object HybridShapeExtract
Returns or sets the DistanceThreshold.
DistanceThresholdActivity
property in object HybridShapeExtract
Returns or sets the DistanceThresholdActivity.
DistanceToSatisfaction
property in object OptimizationConstraint
Returns the parameter containing the distance to constraint satisfaction.
DistanceToTarget
property in object SWKIKConstraint
Returns the distance (in mm) from the constraint end effector to the target.
DistanceType
property in object HybridShapePointOnCurve
Returns or sets the distance type.
DistanceValue
property in object HybridShapeTranslate
Returns or sets the translate distance value.
Distances
object
A collection of all Distance objects currently managed by the application.
Distances
property in object SPAWorkbench
Returns the Distances collection.
Distribution
property in object ABQTemperature
Sets or returns the distribution type associated with this temperature field.
Distribution_Type
enum
Field types.
Dlname
property in object InteropSettingAtt
Retrieves or sets the "DLNAME" setting parameter.
DocLanguage
property in object DocumentationSettingAtt
Returns the technical documentation language parameter.
Document
object
Represents the document.
Document
property in object SelectedElement
Returns the document to which the selected element belongs.
Document
property in object FunctionalElement
Returns the Document.
Document
property in object DrawingViewGenerativeBehavior
Returns or sets the document used to generate the drawing view.
DocumentContentAtCreation
property in object FunctionalSystemSettingAtt
Returns or sets the DocumentContentAtCreation parameter.
DocumentationSettingAtt
object
Setting controller for the Help property tab page.
Documents
object
A collection of all the Document objects currently managed by the application.
Documents
property in object Application
Returns the collection of documents currently managed by the application.
DomainID
property in object PspObject
Returns the DomainID of the object.
Done
method in object BehaviorVBScript
Inform Client VB has Successfully Finished.
DownloadAsXML
method in object OLPTranslator
DownloadTasks
method in object OLPTranslator
Creates native robot language programs from V5 tasks.
Downloader
property in object IgpOlpSettingAtt
Returns or sets value of OLP Translator parameter.
DownloaderDir
property in object IgpOlpSettingAtt
Returns or sets value of OLP Translator Directory parameter.
Dpi
property in object PageSetup
Returns or sets the printing dpi.
Draft
object
Represents the draft shape.
DraftAngle
property in object DraftDomain
Returns the draft angle.
DraftComputationMode
property in object HybridShapeSweepLine
Returns or sets the draft computation mode.
DraftDirection
property in object HybridShapeSweepLine
Returns or sets the draft direction.
DraftDomain
object
Represents the draft domain.
DraftDomains
object
The collection of draft domains used by the draft shape.
DraftDomains
property in object Draft
Returns the collection of draft domains.
DraftFeatureMigrationMode
property in object SpecV4SettingAtt
Returns or sets the activation state of the mode of migration for draft feature.
DraftingPageSetup
object
Represents the page setup for the drawing documents.
DraftingSettingAtt
object
Manages drafting settings.
DragDrop
property in object GeneralSessionSettingAtt
Returns the drag & drop parameter.
Draw
property in object InteropSettingAtt
Retrieves or sets the state of the "Open in Light Mode: 2D Data are not taken into account" setting parameter.
DrawingArrow
object
Represents a drawing arrow in a drawing view.
DrawingArrows
object
A collection of all the drawing arrows currently managed by a drawing view of drawing sheet in a drawing document.
DrawingComponent
object
Represents a drawing component instance (ditto) in a drawing view.
DrawingComponents
object
A collection of all the drawing components (ditto) currently managed by a drawing view of drawing sheet in a drawing document.
DrawingDimExtLine
object
Manages extension lines of a dimension in drawing view.
DrawingDimLine
object
Manages dimension line of a dimension in drawing view.
DrawingDimValue
object
Manages dimension value of a dimension in drawing view.
DrawingDimension
object
Represents a drawing dimension in a Drawing view.
DrawingDimensions
object
A collection of all the drawing dimensions currently managed by a drawing view of drawing sheet in a drawing document.
DrawingDocument
object
Represents the Document object for drawings.
DrawingLeader
object
Represents a drawing leader in a drawing view.
DrawingLeaders
object
A collection of all the drawing leaders currently managed by a drawing view of drawing sheet in a drawing document.
DrawingPageSetup
object
Represents the page setup for the drawing documents.
DrawingPicture
object
Represents a drawing picture in a drawing view.
DrawingPictures
object
A collection of all the drawing pictures currently managed by a drawing view of drawing sheet in a drawing document.
DrawingRoot
object
Represents the drawing object in drawing documents.
DrawingRoot
property in object DrawingDocument
Retrieves the drawing root in the drawing document.
DrawingSheet
object
Represents a drawing sheet of the drawing document.
DrawingSheets
object
A collection of all the drawing sheets currently managed by the drawing document.
DrawingTable
object
Represents a drawing table in a drawing view.
DrawingTables
object
A collection of all the drawing tables currently managed by a drawing view of drawing sheet in a drawing document.
DrawingText
object
Represents a drawing text in a drawing view.
DrawingTextProperties
object
Represents the properties of a drawing text in a drawing view.
DrawingTextRange
object
Represents a drawing text range, or contiguous area, in a drawing text.
DrawingTexts
object
A collection of all the drawing texts currently managed by a drawing view of drawing sheet in a drawing document.
DrawingThread
object
Represents a drawing thread in a drawing view.
DrawingThreads
object
A collection of all the drawing threads currently managed by a drawing view of drawing sheet in a drawing document.
DrawingView
object
Represents a drawing view in a drawing sheet.
DrawingViewGenerativeBehavior
object
Represents the generative behavior of a drawing view.
DrawingViewGenerativeLinks
object
Represents the generative links of a drawing view.
DrawingViews
object
A collection of all the drawing views currently managed by a drawing sheet in a drawing document.
DrawingWelding
object
Represents a drawing welding in a drawing view.
DrawingWeldings
object
A collection of all the drawing weldings currently managed by a drawing view of drawing sheet in a drawing document.
DressUpShape
object
Represents the shapes built with other shape sub-elements such as faces or edges.
Dressup
object
Interface to access the Dressup object.
Dressups
object
A collection of all Dressup entities currently managed by the application.
DualValue
property in object DrawingDimension
Returns or sets dual value type of dimension value.
DynLicenseSettingAtt
object
Interface to handle the dynamic licensing settings.
DynamicCull
property in object VisualizationSettingAtt
Returns the DynamicCull parameter.
DynamicLOD
property in object VisualizationSettingAtt
Returns the DynamicLOD parameter.
dependencies
property in object ABQFilmCondition
Returns the number of temperature-dependent film coefficients.
E5Property
object
Interface to access object properties.
EHMInsertionActPlugMapViewData
object
Interface to access Plug Map view data associated to an Insertion activity.
EHSUpdateSmoothnessFactor
object
Interface representing xxx.
EKPServices
object
Interface to assign and remove Engineering Requirements to and from an activity.
ELPS
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the elapsed time field.
EchoPrint
property in object ABQJob
Sets or returns whether an echo of the input data is printed.
Edge
object
1-D boundary.
EdgeFillet
object
Represents the edges-based fillet shape.
EdgePropagation
property in object EdgeFillet
Returns or sets the edge fillet propagation mode.
EdgeToTearPositioningOrientation
property in object HybridShapeUnfold
Returns or sets the positioning orientation when the reference origin is located on an edge to tear.
EdgesToFillet
property in object VarRadEdgeFillet
Returns the collection of edges to be filleted.
EdgesToKeep
property in object EdgeFillet
Returns the collection of edges to keep by the edge fillet.
EditDedicatedFilterDialogBox
property in object Layout2DSettingAtt
Returns the EditDedicatedFilterDialogBox parameter.
ElecSchWire
object
For technical electrical wire attributes.
ElecSchematicChildren
property in object ElecSchematicObject
This method returns the collection of Electrical Schematic Object's Children (component in Pipe Line, Assembly).
ElecSchematicObject
object
Represents the electrical schematic objects.
ElecSchematicParent
property in object ElecSchematicObject
This method returns the electrical schematic parent.
ElectronicType
property in object PCBObject
Allow to know if : a Product is a BOARD, a PANEL or a COMPONENT, a Hole is a PBD Hole a pattenr is a PCB pattern, a Pad is a contraint area.
Elem
method in object FunctScripts
Returns an association using its index or its name from the Scripts collection.
Elem
property in object HybridShapeExtract
Returns or sets the sub element used as init for the propagation.
Elem
method in object FunctionalObjects
Returns an action using its index or its name from the actions collection.
Elem
method in object FunctionalActions
Returns an action using its index or its name from the actions collection.
Elem
method in object FunctAssociations
Returns an association using its index or its name from the associations collection.
Elem
method in object FunctFacetManagers
Returns a facet manager using its index or its name from the facet managers collection.
Elem
method in object FunctionalVariants
Returns a Variant using its index or its name from the Variants collection.
Elem
method in object FunctActionsGroups
Returns an actions'group using its index or its name from the actions' groups collection.
Elem1
property in object HybridShapeCombine
Returns or sets the first curve used to create the combined curve.
Elem1
property in object HybridShapeLineBisecting
Returns or sets the first line used to create the bisecting line.
Elem2
property in object HybridShapeCombine
Returns or sets the second curve used to create the combined curve.
Elem2
property in object HybridShapeLineBisecting
Returns or sets the second line used to create the bisecting line.
ElemToCut
property in object HybridShapeSplit
Returns or sets the element to cut.
ElemToExtrapol
property in object HybridShapeExtrapol
Returns or sets the curve or surface to extrapolate.
ElemToProject
property in object HybridShapeProject
Returns or sets the element to project.
ElemToRotate
property in object HybridShapeRotate
Retuns or sets the element to be rotated.
ElemToScale
property in object HybridShapeScaling
Returns or sets the element to scale.
ElemToSymmetry
property in object HybridShapeSymmetry
Returns or sets the element to transform.
ElemToTransform
property in object HybridShapeAffinity
Returns or sets the element to transform using the affinity.
ElemToTransform
property in object HybridShapeAxisToAxis
Returns or sets the element to transform.
ElemToTranslate
property in object HybridShapeTranslate
Returns or sets the element to translate.
ElemUntil
property in object HybridShapeExtrapol
Returns or sets the surface or volume specifying the extrapolation limit.
Element
property in object HybridShapeInverse
Role : To get the element inverted.
Element
property in object HybridShapeAxisLine
Returns or sets the element from which axis is computed.
Element
property in object HybridShapePointCenter
Returns or sets the circle, ellipse or sphere.
Element1
property in object HybridShapeIntersection
Returns or sets the first element to intersect.
Element1
property in object HybridShapeCircle3Points
Returns or sets the circle first passing point.
Element2
property in object HybridShapeIntersection
Returns or sets the second element to intersect.
Element2
property in object HybridShapeCircle3Points
Returns or sets the circle second passing point.
Element2
property in object HybridShapeLineBiTangent
Returns or Sets the second tangency element (point, curve) lying on the support surface.
Element3
property in object HybridShapeCircle3Points
Returns or sets the circle third passing point.
ElementToTransfer
property in object HybridShapeTransfer
Returns or sets the element to transfer.
ElementsToChamfer
property in object Chamfer
Returns the collection of geometrical elements to be chamfered.
Ellipse2D
object
Class defining an ellipse in 2D Space.
EnableAnlMode
property in object AnalysisSettingAtt
Returns or sets the EnableAnlMode parameter.
EnableHeartBeat
property in object RobAnalysisHeartBeatUsageSettingAtt
Role :Enables or Disables the Heart Beat Rate while the robot motion is planned return E_FAIL.
EndAngle
property in object HybridShapeRevol
Role : To get_EndAngle on the object.
EndAngle
property in object HybridShapeCircle
Returns the circle end angle.
EndBlock
method in object ManufacturingOutput
Specify that the Block is ended.
EndDate
property in object Activity
This property returns the end date of the current activity.
EndDistance
property in object RenderingLight
Returns or sets the light maximum distance of illumination.
EndEffector
property in object SWKIKConstraint
Returns or sets the end effector of the IK chain of the constraint.
EndExtremity
property in object StrMember
Returns the member's end extremity object.
EndExtremityContinuity
property in object HybridShapeCurveSmooth
Returns or sets the continuity condition (curvature, tangency or point) applied to the smoothed curve with regard to the input curve at the end extremity of the input curve.
EndInstanceFactory
method in object InstanceFactory
Ends the instantiation process.
EndInstantiate
method in object InstanceFactory
Ends the instantiation of the reference.
EndLine
method in object ManufacturingOutput
Specify that the line is ended.
EndMeridianAngle
property in object HybridShapeSphere
Returns EndMeridianAngle on the object.
EndOffset
property in object HybridShapeExtrude
Role : To get_EndOffset on the object.
EndOffset
property in object HybridShapeLinePtPt
Returns the end length of the line.
EndOffset
property in object HybridShapeLinePtDir
Returns the end length of the line.
EndOffset
property in object HybridShapeLineAngle
Role : Get the end length of the line.
EndOffset
property in object HybridShapeLineNormal
Returns the end length of the line.
EndOffset
property in object HybridShapeLineTangency
Returns the end length of the line.
EndOffset
property in object HybridShapeLineBisecting
Returns the end offset of the line.
EndParallelAngle
property in object HybridShapeSphere
Returns EndParallelAngle on the object.
EndParam
property in object HybridShapeIntegratedLaw
Gets end parameter.
EndPoint
property in object Curve2D
Returns the end point of the curve.
EndPoint
property in object HybridShapeConic
Returns or sets the conic end point.
EndStepNum
property in object ABQTemperatureHistory
Sets or returns the step number at which to stop reading the temperature data.
EndStepOnTempChange
property in object ABQHeatTransferStep
Sets or returns whether the step should end when steady state is reached.
EndTangent
property in object HybridShapeConic
Returns or sets the tangent direction at the conic end point.
EndingAngle
property in object HybridShapeSpiral
Reads / Changes the Ending Angle of the Spiral.
EndingRadius
property in object HybridShapeSpiral
Reads / Changes the ending radius of the Spiral.
EnergyFactor
property in object RenderingLight
Changes the factor for indirect illumination energy.
EnergyFraction
property in object ABQGeneralStaticStep
eturns or sets the EnergyFraction if the stabilization method is DISSIPATION.
EngineInterface
property in object RenderingSettingAtt
Returns or sets the EngineInterface parameter.
Entities
property in object BasicComponent
Returns the collection of Entities agregated by the basic component.
EnumParam
object
Represents the enum parameter.
EnvelopCondition
object
Interface for accessing Envelop Condition modifier on a TPS.
EnvelopCondition
method in object Annotation
Get the annotation on the EnvelopCondition interface.
Environ
method in object SystemService
Returns the value of an environment variable.
EnvironmentImage
property in object RenderingMaterial
Returns or sets the environment image pathname of a material.
Ergo
property in object SWKManikin
Returns the ergonomic analysis of the current manikin.
ErrorMessage
property in object PspPlacePart
Returns the message associated with the last error.
ErrorlogStatisticsSettingAtt
object
Interface for Errorlog statistic Controler.
Evaluate
method in object SystemService
Evaluates a scripted function.
Evaluate
method in object Sketch
ExecuteBackgroundProcessus
method in object SystemService
Executes an asynchronous process.
ExecuteProcessus
method in object SystemService
Executes a synchronous process.
ExecuteScript
method in object SystemService
Executes a scripted function.
ExistAnalysisData
method in object Material
Returns true if a analysis material exists on the current material.
ExistCompositesData
method in object CompositesMaterial
Returns true if a composites properties exists on the current material.
ExistRenderingData
method in object Material
Returns true if a rendering material exists on the current material.
ExistingTaskTreatment
property in object IgpOlpSettingAtt
Returns or sets value of OLP Existing Task Treatment On Upload parameter.
ExistsInScene
method in object ProductScene
Returns whether the product has overloaded attributes in the Product-Scene.
ExpNotationValuesGreater
property in object UnitsSheetSettingAtt
Returns or sets the ExpNotationValuesGreater parameter.
ExpNotationValuesLower
property in object UnitsSheetSettingAtt
Returns or sets the ExpNotationValuesLower parameter.
ExpandSketchBasedFeaturesNodeAtCreation
property in object PartInfrastructureSettingAtt
Returns or sets the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
ExpertCheck
object
Represents the edition part of a check.
ExpertCheckRuntime
object
Runtime part of a check.
ExpertReportObject
object
Represents the ExpertReportObject object.
ExpertReportObjects
object
Represents the collection of (succeeded or failed) report objects.
ExpertRule
object
Represents the edition part of a rule.
ExpertRuleBase
object
Represents the RuleBase object that can be edited.
ExpertRuleBaseComponentRuntime
object
Represents a rule base component in a ruleset.
ExpertRuleBaseComponentRuntimes
object
Represents the collection of ExpertRuleBase (ExpertChecks, ExpertRules, and ExpertRuleSets) components.
ExpertRuleBaseComponentRuntimes
property in object ExpertRuleSetRuntime
Returns the list of the RuleBaseComponent.
ExpertRuleBaseRuntime
object
Represents the Runtime part of the RuleBase.
ExpertRuleRuntime
object
Represents the ExpertRuleRuntime object.
ExpertRuleSet
object
Represents the ExpertRuleSet object which is the editable part of a RuleSet or a RuleBase.
ExpertRuleSetRuntime
object
Represents the ExpertRuleSet object in the RelationSet.
Explode
method in object DrawingComponent
Explodes the drawing component instance (every sub elements of the drawing component are created).
ExplodeAndSelect
method in object DrawingComponent
Explodes the drawing component instance (every sub elements of the drawing component are created) and put created sub elements in selection set.
Export
method in object TCPTrace
Export the TCP trace data in a file.
Export
method in object Clash
Exports the results in a XML file.
Export
method in object Section
Exports the sections curves of the section in a document.
Export
method in object AnalysisExport
Export computed loads/displacements as a CATAnalysisExport file.
Export
method in object ClashResult
Exports the results in a XML file.
Export3DXmlSettingAtt
object
Represents a setting controller for the 3D XML export settings.
ExportData
method in object Document
Exports the data contained in the document to another format.
ExportData
method in object AnalysisImage
Extracts image results.
ExportDataInGlobalAxis
method in object AnalysisImage
Extracts image results.
ExportDataInManualAxis
method in object AnalysisImage
Extracts image results.
ExportDataInUserAxis
method in object AnalysisImage
Extracts image results.
ExportDataWithMeshPartId
method in object AnalysisImage
Extracts image results and location with mesh part name (as identifier).
ExportEdges
property in object VrmlSettingAtt
Returns or sets the ExportEdges parameter (exported Vrml files will or will not contains edge informations).
ExportMSBO
property in object IgesSettingAtt
Returns or sets the Export Solid Mode setting parameter value.
ExportNormals
property in object VrmlSettingAtt
Returns or sets the ExportNormals parameter (exported Vrml files will or will not contains normal informations).
ExportProperties
method in object PspWorkbench
This method extracts property values of the current document to an output XML file.
ExportTexture
property in object VrmlSettingAtt
Returns or sets the ExportTexture parameter (exported Vrml files will or will not contains texture informations).
ExportTextureFile
property in object VrmlSettingAtt
Returns or sets the ExportTextureFile parameter (Textures will be exported in the vrml file containing the geometry or in external files).
ExportTextureFormat
property in object VrmlSettingAtt
Returns or sets the ExportTextureFormat parameter.
ExportUnit
property in object IgesSettingAtt
Returns or sets the Export Units setting parameter value.
ExportVersion
property in object VrmlSettingAtt
Returns or sets the ExportVersion parameter (version of exported Vrml files).
ExposeCompRef
method in object DrawingComponent
Exposes the component reference of this drawing component instance in a new detail sheet.
ExposeCompRefInSheet
method in object DrawingComponent
Exposes the component reference of this drawing component instance in a specific detail sheet.
ExtLineSlant
property in object DrawingDimExtLine
Returns or sets slant angle of extension line.
ExtLineType
property in object DrawingDimExtLine
Returns extension line type of dimension.
ExtendEdgesMode
property in object HybridShapeExtrapol
Returns or sets the extension of extrapolated edges mode.
ExtendMode
property in object HybridShapeIntersection
Returns or sets the ExtendMode flag for intersect.
ExtendProductAsFoundation
method in object StrObjectFactory
Extend an assembly as a structure foundation assembly.
ExtensionClass
property in object BehaviorExtension
Returns the type of the technological object associated to this behavior extension.
ExternalMaxDeformation
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of mode with external deformation (Gap Healing).
ExternalReferencesAsVisible
property in object PartInfrastructureSettingAtt
Returns or sets the "ExternalReferencesAsVisible" parameter.
ExternalReferencesAssemblyRootContext
property in object PartInfrastructureSettingAtt
Returns or sets the "ExternalReferencesAssemblyRootContext" parameter.
ExternalReferencesNodeInTree
property in object PartInfrastructureSettingAtt
Returns or sets the "ExternalReferencesNodeInTree" parameter.
ExternalThickness
property in object Shell
Returns the shell external thickness.
ExternalTypeDeformation
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of type for external deformation (Gap Healing).
ExtractBOM
method in object Product
Extracts the product's contents as a bill of materials (BOM).
ExtractHTMLReport
method in object AnalysisPostManager
ExtractMode
property in object Group
Returns or sets the mode for the extraction methods.
ExtrapolateMode
property in object HybridShapeIntersection
Returns or sets the ExtrapolateMode flag for intersect.
ExtremumType
property in object HybridShapeExtremum
Returns or sets the extremum type.
ExtremumType
property in object HybridShapeExtremumPolar
returns or sets the type of extremum.
ExtremumType2
property in object HybridShapeExtremum
Returns or sets the extremum type of the second direction.
ExtremumType3
property in object HybridShapeExtremum
Returns or sets the extremum type of the third direction.
ExtrudedObject
property in object HybridShapeExtrude
Role : To get_ExtrudedObject on the object.
elemBehavEnum
enum
elemIDEnum
enum
FASReportingSettingAtt
object
The interface to access a DNBIAFASReportingSettingAtt.
FTAInfraSettingAtt
object
Represents the FT&A (Functional Tolerancing & Annotation) infrastructure setting controller object.
FTASettingAtt
object
The interface to access a CATIAFTASettingAtt.
FabricWidth
property in object CompositesMaterial
returns or set the fabric width defined in Composites tab in mm.
Face
object
2-D boundary.
FaceFillet
object
Represents the face fillet shape.
FaceHLDrill
property in object VisualizationSettingAtt
Returns the FaceHLDrill parameter.
FaceNumber
property in object RenderingEnvironment
Returns or sets the spherical environment face number.
FaceToRemove
property in object TritangentFillet
Returns the face to be removed by the tritangent fillet.
FaceType
property in object PspPartConnector
Returns the face type (normal or "transparent" support) for this connector.
FacesToDraft
property in object DraftDomain
Returns the faces to be drafted.
FacesToFillet
property in object AutoFillet
Returns or sets the faces to fillet.
FacesToFillets
property in object AutoFillet
FacesToRemove
property in object Shell
Returns the collection of faces to be removed by the shell process.
FacesToThicken
property in object Thickness
Returns the collection of faces to be thickened.
FacetManagers
property in object FunctionalDocument
Returns the Facet Managers.
Factor
property in object Scaling
Returns the scaling factor.
Factory
object
Abstract object gathering behaviours of all objects being a factory.
Factory2D
object
Interface to the factory for 2D objects.
Factory2D
property in object Sketch
Returns the 2D factory of the sketch.
Factory2D
property in object DrawingView
Returns the 2D factory of the drawing view.
Factory2D
property in object Layout2DView
Returns the 2D factory of the Layout2D view.
FailItem
method in object ExpertReportObjects
Retrieves a report failed component from a failed tuples collection, using its index or its name from the Check collection.
Failures
property in object ExpertCheckRuntime
Returns the list of the tuples that don't satisfy this check.
FakeDimType
property in object DrawingDimValue
Returns or sets fake dimension type of value.
FalloffExponent
property in object RenderingLight
Changes the light falloff exponent.
Families
property in object MaterialDocument
Returns the Family collection object from the current material document.
FamilyName
property in object StrSection
Returns the parameter defining the family name.
FarLimit
property in object Viewer3D
Returns or sets the far limit for the far clipping plane.
Fastener
object
Interface DELMIAFastener DELMIAFastener represent body in white fasteners of both types point and curve.
FastenerGroup
object
FastenerGroups
method in object FastenerWorkBench
FastenerSet
object
Interface DELMIAFasteners DELMIAFasteners represent collection of fasteners of both types point and curve.
FastenerWorkBench
object
Interface DELMIAFastenerWorkBench It is a utility class to get fasteners and groups from document.
FeatRemark
property in object ManufacturingMachinableFeature
Returns the manufacturing machinable feature remark.
FeatType
property in object ManufacturingMachinableFeature
Returns the manufacturing machinable feature type.
FeatureGenerator
object
The interface to access a CATIAFeatureGenerator.
FeatureToLocatePositions
property in object UserPattern
Returns the collection of feature to locate instances.
FeatureToLocatePositions
property in object UserRepartition
Returns the collection of feature to locate instances.
Field
method in object Roughness
Retrieves roughness field.
FieldOfView
property in object Viewpoint3D
Returns or sets the field of view associated with the viewpoint.
FieldOfView
property in object AnnotatedView
Returns the field of view associated with the annotated view.
Fields
property in object ABQInitialStep
Returns the ABQFields container associated with the step.
Fields
property in object ABQGeneralStaticStep
Returns the ABQFields container associated with the step.
Fields
property in object ABQExplicitDynamicsStep
Returns the ABQFields container associated with the step.
FifthGuideCrv
property in object HybridShapeSweepConic
Returns or sets the fifth guide curve.
File
object
Represents the file object.
FileAccessStatisticsSettingAtt
object
Interface for FileAccess statistic Controler Role : the FileAccess statistics controler manages the values of all or only a part of the attributes available for the thematic.
FileComponent
object
Represents the file object.
FileExists
method in object FileSystem
Returns whether a given file exists.
FilePath
property in object DesignTable
Returns or sets the path of the design table (read/write property).
FileSearchOrder
property in object Application
Returns or sets the default path concatenation used by the application to search for when opening files.
FileSelectionBox
method in object Application
Displays a modal dialog box which can be used to select / enter the name of a file to open / save.
FileSeparator
property in object FileSystem
Returns the file separator string.
FileSystem
object
Represents the file system object.
FileSystem
property in object Application
Returns the file system.
Files
object
A collection of all the file objects in a folder.
Files
property in object Folder
Returns the file collection of the folder.
Fill
property in object Marker2D
Returns or sets the Marker2D's filling status (1 the figure is filled, 0 the figure is not filled).
Fill
property in object Marker3D
Returns or sets the marker 3D's filling status (1 the figure is filled, 0 the figure is not filled).
FillSelWithExtract
method in object Group
Fills the selection with all products which can be extracted from the group.
FillSelWithInvert
method in object Group
Fills the selection with all terminal node products which cannot be extracted from the group.
FillTwistedAreas
property in object HybridShapeSweep
Returns or sets the fill twisted areas mode.
Fillet
object
Represents the fillet shape.
FilletBoundaryRelimitation
property in object Fillet
Returns or sets the fillet boundary relimitation mode.
FilletRadius
property in object AutoFillet
Returns the Fillet radius.
FilletRepresentation
property in object DrawingViewGenerativeBehavior
Returns or sets the view Fillet representation mode.
FilletSpine
property in object VarRadEdgeFillet
Returns or set the spine for circle bitangency fillet.
FilletTrimSupport
property in object Fillet
Returns or sets the fillet Trim Support mode.
FilletVariation
property in object VarRadEdgeFillet
Returns or sets the edge fillet radius variation mode.
FilterCorrespondence
method in object Selection
Specifies if the automation objects appearing as Value property of SelectedElement objects fit a given filter.
FinalGatheringAccuracy
property in object RenderingShooting
Returns or sets the number of rays shot in each final gather.
FinalGatheringMaxRadius
property in object RenderingShooting
Returns or sets the maximum distance in which a final gather result can be used.
FinalGatheringMinRadius
property in object RenderingShooting
Returns or sets the minimum distance in which a final gather result can be used.
FinalGatheringStatus
property in object RenderingShooting
Returns or sets the final gathering status of shooting.
FindInterface
method in object SchWorkbench
This method returns an interface handle to an object.
FindInterface
method in object ArrWorkbench
This method returns a interface handle as specified by the input interface name and the input interface handle.
FindObject
method in object Selection
Finds an object in the current selection and deletes it from the selection.
FindObjectByName
method in object Part
Finds an object that is not a collection by its name.
FindObsoleteClasses
method in object SchObsoleteModel
Find obsolete base classes.
FindPaths
method in object SchNetworkAnalysis
Given a start and end object in the network, this method returns a list of network objects each representing a path connecting the the 2 input objects.
Fingerprint
method in object ExpertRuleBaseRuntime
Returns the Fingerprint information.
First
property in object HybridShapePlane2Lines
Role : Get the first line.
First
property in object HybridShapePlane3Points
Returns or sets the first point.
FirstAct
property in object HtsCCPSettingAtt
Returns or sets the FirstAct parameter.
FirstAngle
property in object Revolution
Returns the revolution first angle.
FirstAngleLaw
property in object HybridShapeSweepCircle
Returns or sets the first angle law useful in some circular sweep types.
FirstAngleLawInversion
property in object HybridShapeSweepCircle
Returns or sets the first angle law inversion information.
FirstComponentDirection
property in object SolidCombine
Returns or sets the direction of first component of SolidCombine.
FirstComponentProfile
property in object SolidCombine
Returns or sets the profile of first component of SolidCombine.
FirstContinuity
property in object HybridShapeConnect
Gets or Sets the continuity on first curve.
FirstCurve
property in object HybridShapeConnect
Gets or Sets the first reference curve.
FirstCurvesConstraint
property in object HybridShapeWrapCurve
Returns or sets constraint at first curves of the WrapCurve.
FirstDirection
property in object HybridShapeCircleCtrRad
Returns or sets the first direction used to set the angles reference.
FirstDirection
property in object HybridShapePointOnPlane
Returns or sets the first direction on the plane to compute the point (for stability).
FirstDirectionRepartition
property in object RectPattern
Returns the linear repartition along the first direction.
FirstDirectionRow
property in object RectPattern
Returns the position of the shape to be copied along the first linear direction.
FirstElem
property in object HybridShapeTrim
FirstElem
property in object HybridShapeCorner
Returns or sets the corner first reference element.
FirstElem
property in object HybridShapeFilletBiTangent
Returns or Sets the first support surface feature.
FirstElem
property in object HybridShapeFilletTriTangent
Returns or sets the first support surface feature.
FirstElement
property in object HybridShapeRotate
Returns or sets the first element defining the rotation angle.
FirstFace
property in object FaceFillet
Returns or sets the first limiting face.
FirstFace
property in object TritangentFillet
Returns the first face limiting the tritangent fillet.
FirstGroup
property in object Clash
Returns or sets the first group used by the computation.
FirstGroup
property in object Distance
Returns or sets the first group used by the computation.
FirstGuideCrv
property in object HybridShapeSweepLine
Returns or sets the sweep operation first guide curve.
FirstGuideCrv
property in object HybridShapeSweepConic
Returns or sets the first guide curve.
FirstGuideCrv
property in object HybridShapeSweepCircle
Returns or sets the sweep operation first guide curve.
FirstGuideCrv
property in object HybridShapeSweepExplicit
Gets the first guide curve.
FirstGuideSurf
property in object HybridShapeSweepLine
Returns or sets the sweep operation first guide surface.
FirstLawRelimiter
property in object HybridShapeFilletBiTangent
Gets or sets Law first relimiter for variable shape fillet with law management.
FirstLengthLaw
property in object HybridShapeSweepLine
Returns or sets the first length law useful in some linear sweep types.
FirstLengthLawInversion
property in object HybridShapeSweepLine
Returns or sets whether the first length law has to be inverted.
FirstLimit
property in object Prism
Returns the first prism limit (one of the two).
FirstLimit
property in object AssemblyPocket
Returns the first pocket limit.
FirstLimitType
property in object HybridShapeExtrude
Returns or sets the First limit type.
FirstLink
method in object DrawingViewGenerativeLinks
Returns the first link of the drawing view.
FirstOrientation
property in object RectPattern
Returns or sets whether the pattern is built towards the first direction orientation.
FirstOrientation
property in object HybridShapeTrim
FirstOrientation
property in object HybridShapeCorner
Returns or sets the orientation of the corner first reference element.
FirstOrientation
property in object HybridShapeConnect
Gets or Sets the orientation of first curve FirstOrientation = 1 : SameOrientation.
FirstOrientation
property in object HybridShapeFilletBiTangent
Returns or Setsthe first orientation used to specify fillet center position.
FirstOrientation
property in object HybridShapeFilletTriTangent
Returns or sets the first orientation used to specify fillet center position.
FirstPoint
property in object HybridShapeRotate
Returns or sets the first point defining the rotation.
FirstPoint
property in object HybridShapeConnect
Gets or Sets the first reference point.
FirstPoint
property in object HybridShapeTranslate
Returns or sets the first point defining the translation.
FirstPoint
property in object HybridShapePointBetween
Returns or sets the first reference point.
FirstProduct
property in object Distance
Returns the product belonging to the first group that realizes the minimum distance.
FirstProduct
property in object Conflict
Returns the first product involved in the conflict.
FirstRectangularPatternParameters
property in object RectPattern
Returns or sets the rectangular pattern parameters required to define the pattern.
FirstTangentOrientation
property in object HybridShapeCorner
Returns or sets the tangent orientation of the corner first reference element.
FirstTension
property in object HybridShapeConnect
Returns the tension on the first curve making up the connect curve.
FirstUptoElem
property in object Line
Role : Gets the First upto element of the line.
FirstUptoElement
property in object HybridShapeExtrude
Returns or sets the First up-to element used to limit extrusion.
FitAllInWall
method in object RenderingEnvironmentWall
If a texture is mapped on the wall, scale automatically the texture to fit inside the wall.
FitToPrinterFormat
property in object DraftingPageSetup
Fits the format of the print to the printer format.
FitToPrinterFormat
property in object DrawingPageSetup
Fits the format of the print to the printer format.
FitToSheetFormat
property in object DraftingPageSetup
Fits the format of the print to the sheet format.
FitToSheetFormat
property in object DrawingPageSetup
Fits the format of the print to the sheet format.
FittingSettingAtt
object
Interface to handle parameters of DMU Fitting Tools Options Tab page Role : This interface is implemented by a component which represents the controller of DMU Fitting Tools Options parameter settings.
FixTogether
object
The object that manages a sequence of products or fixTogethers.
FixTogethers
object
A collection of all the FixTogether objects contained in the product.
FixTogethersCount
property in object FixTogether
Returns the number of FixTogether entities in the FixTogether.
FixedPart
property in object Mechanism
Returns or sets the fixed part of the mechanism.
FixedText
property in object WIText
FixedTimeIncrementMethod
enum
Time increment methods for fixed time incrementation.
FixedTimeIncrementMethod
property in object ABQExplicitDynamicsStep
Sets or returns the fixed time increment method.
FixtureGeometriesCount
method in object ManufacturingSetup
Returns the number of fixture geometries from a Manufacturing Setup.
FlagNote
object
Interface for the TPS Flag Note object.
FlagNote
method in object Annotation
Get the annotation on the FlagNote interface.
FlagNoteText
property in object FlagNote
Retrieves flag text.
FlagText
property in object Noa
Retrieves Flag Text.
Flip
method in object StrMember
Flips the section.
Flip
method in object DrawingComponent
Flips the drawing component instance around X axis To flip around Y axis you have to flip the component around X and to add a rotation of 180 degrees.
FlipConnected
method in object SchComponent
For component that is connected to another component or is inserted into a route.
FlipHorizontal
method in object SchComponent
Mirror transform a component's image about the horizontal-axis centered at the local axis of the component.
FlipOnLine
method in object SchComponent
Mirror the graphical object of this component.
FlipOverLine
method in object SchRouteSymbol
Mirror the symbol over the route segment line on which the symbol is positioned.
FlipOverLine
method in object SchAnnotationBreak
Mirror the symbol over the route segment line that ends in the connector on which the symbol is placed.
FlipOverOrthogonalLine
method in object SchRouteSymbol
Mirror the symbol over the line orthogonal to the route segment line on which the symbol is positioned and going through the symbol's position point on that segment line.
FlipOverOrthogonalLine
method in object SchAnnotationBreak
Mirror the symbol over the line orthogonal to the route segment line that ends in the connector on which the symbol is placed and going through the connector's position.
FlipSide
property in object ABQAnalyticalRigidSurface
Sets or returns the flip state for the ARS.
FlipU
property in object RenderingMaterial
Returns or sets the texture flip status along U axis.
FlipUStatus
property in object RenderingEnvironmentWall
Returns or sets texture orientation status along the U axis.
FlipV
property in object RenderingMaterial
Returns or sets the texture flip status along V axis.
FlipVStatus
property in object RenderingEnvironmentWall
Returns or sets texture orientation status along the V axis.
FlipVertical
method in object SchComponent
Mirror transform a component's image about the vertical-axis centered at the local axis of the component.
FlowCapability
property in object PspCntrFlow
Returns or sets Flow capability of the connector.
FlowReality
property in object PspCntrFlow
Returns or sets Flow reality of the connector.
Flush
method in object ManufacturingOutput
Flush all Data in the Stream.
FlyCollisionMode
property in object VisualizationSettingAtt
Returns the FlyCollisionMode parameter.
FlyCollisionSphereRadius
property in object VisualizationSettingAtt
Returns the FlyCollisionSphereRadius parameter.
FlyCollisionType
property in object VisualizationSettingAtt
Returns the FlyCollisionType parameter.
FlySensitivity
property in object VisualizationSettingAtt
Returns the FlySensitivity parameter.
FlySpeed
property in object VisualizationSettingAtt
Returns the FlySpeed parameter.
FlySpeedMode
property in object VisualizationSettingAtt
Returns the FlySpeedMode parameter.
FocalDistance
property in object Parabola2D
FocusDistance
property in object Viewpoint3D
Returns or sets the focus distance of the viewpoint.
Foggy
property in object Viewer3D
Returns or sets the fog mode.
Folder
object
Represents the folder object.
FolderExists
method in object FileSystem
Returns whether a given folder exists.
Folders
object
The folders object belongs to a folder.
FollowGroundAltitude
property in object VisualizationSettingAtt
Returns the FollowGroundAltitude parameter.
FollowGroundMode
property in object VisualizationSettingAtt
Returns the FollowGroundMode parameter.
FollowNodalRotation
property in object ABQConcentratedForce
Sets or returns the follow nodal rotation flag.
FontName
property in object DrawingTextProperties
Returns or sets the font name of the drawing text.
FontSize
property in object DrawingTextProperties
Returns or sets the font size of the drawing text.
ForbidNonCoplanarLines
property in object HybridShapePlane2Lines
if ForbidNonCoplanarLines = TRUE, both lines have to be on the same plane.
ForceClearanceVoxel
property in object N4DNavigatorSettingAtt
ForceUpdate
method in object DrawingSheet
Forces the update of all the drawing views of the drawing sheet.
ForceUpdate
method in object DrawingViewGenerativeBehavior
Forces the Update the drawing view even if not necessary.
ForceVoxel
property in object N4DNavigatorSettingAtt
Form
property in object ToleranceZone
Retrieves tolerance zone form.
Formula
object
Represents the formula relation.
Formulation
property in object ABQMechConnBehavior
Sets or returns the formulation in a mechanical connection.
FormulationOption
property in object ABQFastenedPair
Sets or returns the formulation option.
FormulationOption
property in object ABQFastenedConnectionEnhancement
Sets or returns the formulation option.
FormulationOption_Type
enum
Formulation_Type
enum
Formulation types.
Forshortened
property in object DrawingDimension
Returns or sets foreshortened mode or not.
FourthGuideCrv
property in object HybridShapeSweepConic
Returns or sets the fourth guide curve.
Frame
property in object Marker2D
Returns or sets the Marker2D's framing status (1 the figure is framed, 0 the figure is not framed).
Frame
property in object Marker3D
Returns or sets the marker 3D's framing status (1 the figure is framed, 0 the figure is not framed).
Frame
method in object ReferenceFrame
Retrieves Frame of the TPS.
FrameType
property in object DrawingText
Returns or sets the frame type of the drawing text.
FrameType
property in object DrawingTextProperties
Returns or sets the frame type of the drawing text.
FrameVisibility
enum
FrameVisualization
property in object DrawingView
Returns or sets the drawing view frame visualization state.
FrameVisualization
property in object Layout2DView
Returns or sets the Layout2D view frame visualization state.
Free
method in object FunctionalFacet
Free the resources allocated by the Facet.
FreeParameter
object
Interface to access a CATIAFreeParameter.
FreeParameters
object
Interface to access a CATIAFreeParameters.
FreeParameters
property in object Optimization
Returns the collection of the free parameters.
FreeSpace
object
FreeSpaces
object
Interface to compute Free Spaces.
FreeSpaces
property in object OptimizerWorkBench
Returns FreeSpaces.
FreeState
object
Interface for accessing Free State modifier on a TPS.
FreeState
method in object Annotation
Get the annotation on the FreeState interface.
Freezed
property in object ManufacturingMachinableArea
Returns the manufacturing machinable area freezed state.
Frequency
property in object LicenseSettingAtt
Retrieves or Sets the contact frequency.
FrequencyIncrement
property in object ABQMassScaling
Sets or returns the scaling frequency increment.
FrequencyInterval
property in object ABQMassScaling
Sets or returns the scaling frequency interval.
FrequencyType
property in object ABQMassScaling
Sets or returns the scaling frequency type.
FrictionCoefficient
property in object ABQMechConnBehavior
ets or returns the friction coefficient if the formulation is PENALTY.
From
property in object HybridShapeBoundary
Removes or sets the ending limit(i.
From
property in object FunctionalAction
Get the From object.
FromOrientation
property in object HybridShapeBoundary
Gets or sets the Ending Limit Orientation (i.
FullName
property in object Document
Returns the document's full file name, including its path.
FullName
property in object Application
Returns the application's executable file full name, including its path.
FullSceneAntiAliasingMode
property in object VisualizationSettingAtt
Returns the AntiAliasingMode parameter.
FullScreen
property in object Viewer
Returns or sets the state of a viewer to occupy the whole screen.
FunctActionsGroup
object
The interface to access a group of functional actions in a system.
FunctActionsGroups
object
The interface to access the groups of functional actions in a system.
FunctAssociation
object
The interface to access a Functional Association.
FunctAssociations
object
The interface to access a set of Functional Associations.
FunctFacetManagers
object
Represents the Functional Facet's Managers.
FunctGenScriptMgr
object
The interface to access a Functional GenerativeScripts manager.
FunctMultiRepMgr
object
The interface to access a Functional Multi-Rep manager.
FunctNodeGraphLayout
object
Represents a CATIAFunctNodeGraphLayout.
FunctScript
object
The interface to access a Functional Script.
FunctScripts
object
The interface to access a set of Functional Scripts.
FunctionStatus
property in object PspFunctional
Returns function object status.
FunctionalAction
object
The interface to access a Functional Action.
FunctionalActionPresentation
property in object FunctionalSystemSettingAtt
Returns or sets the FunctionalActionPresentation parameter.
FunctionalActions
object
The interface to access a collection of FunctionalActions.
FunctionalDescription
object
The interface to access a Functional Description.
FunctionalDocument
object
Represents a Functional Document.
FunctionalElement
object
Represents a Functional Element.
FunctionalElement
property in object FunctionalFacet
Get the Functional Element owning the Facet.
FunctionalFace
property in object AutoDraft
FunctionalFace
property in object AutoFillet
FunctionalFaces
property in object AutoDraft
Returns or sets the functional faces.
FunctionalFaces
property in object AutoFillet
Returns or sets the functional face.
FunctionalFacet
object
The interface to access a Functional Facet.
FunctionalFacetMgr
object
The interface to access a Functional Facet Manager.
FunctionalObject
object
The interface to access a Functional Object.
FunctionalObjectProxy
object
The interface to access a Functional ObjectProxy.
FunctionalObjects
object
Interface to access a collection of FunctionalObjects.
FunctionalPosition
object
Represents a Functional Position.
FunctionalSystemSettingAtt
object
Enables attribute access to PFD options.
FunctionalVariant
object
The interface to access a Functional Variant.
FunctionalVariants
object
The interface to access a collection of FunctionalVariants.
filmCoeff
property in object ABQFilmCondition
Sets or returns the reference film coefficient if the film condition is not temperature dependent.
format
property in object DrawingPicture
Sets the picture format.
GSMVisibility
method in object HybridShapeFactory
Set Visibility attribut for Shape Design Features.
Gamma
property in object PageSetup
Returns or sets Gamma factor for print.
GenAndPutID
method in object PspID
Returns the Generated ID with the sequence number and is stored on the object.
GenAndPutIDNoGenSeqNum
method in object PspID
Generates ID without the sequence number and is stored on the object.
GenIDNoGenSeqNum
method in object PspID
Generates ID without the sequence number( if not set previously) and is not stored on the object.
GenViewsPosMode
property in object DrawingSheet
Returns or sets the generative views position stability mode.
GeneralSessionSettingAtt
object
Setting controller for the General property tab page.
GeneralStatisticsSettingAtt
object
Interface for General statistic Controler.
GeneralTolClass
property in object FTASettingAtt
Returns or sets the Dimension general class parameter.
Generate
method in object UserSurfaces
Use this method in a Part.
Generate
method in object FeatureGenerator
Generates the features.
GenerateBOMReport
method in object ArrBOMReport
This method generate a BOM report on the current piping document to an output html file.
GenerateDimensions
method in object DrawingSheet
Generates dimensions in all the drawing views of the drawing sheet.
GenerateInAProductCtx
method in object UserSurfaces
Use this method in a Product.
GenerateInContext
method in object FeatureGenerator
Generates the features.
GenerateOutputCode
method in object ManufacturingOutputGenerator
Return the Output Code for an object in the right CNC Machine.
GenerateReport
method in object RpmReport
This method generates a report to an output file.
GenerateReport
method in object PspAttributeReport
Generate report (output format in html or CSV) and returns the status.
GenerateXMLReportForChecks
method in object Relations
Generates an XML Report on all checks in the current document.
GenerativeBehavior
property in object DrawingView
Returns the generative behavior of the drawing view.
GenerativeLinks
property in object DrawingView
Returns the generative links of the drawing view.
GenericAccuracyProfile
object
Interface to manage Generic Accuracy Profile of Robot controller.
GenericAction
object
Interface representing a GenericAction.
GenericActionFactory
object
Interface representing GenericAction factory.
GenericMotionProfile
object
Interface to manage Generic Motion Profile of Robot controller.
GenericObjFrameProfile
object
Interface to manage Generic Object frame Profile of Robot controller.
GenericToolProfile
object
Interface to manage Generic Tool Profile of Robot controller.
Geodesic
property in object HybridShapeCurvePar
Returns or sets Geodesic mode.
Geodesic
property in object HybridShapeLineAngle
Role : Get geodesic mode.
GeometricElement
object
2D or 3D wireframe geometric element.
GeometricElements
object
A collection of all geometric elements contained in a part or a sketch.
GeometricElements
property in object Part
Returns the collection object containing the part geometrical elements.
GeometricElements
property in object HybridBody
Returns the list of geometrical elements included in the hybrid body.
GeometricElements
property in object Sketch
Returns the list of geometrical elements included in the sketch.
GeometricElements
property in object DrawingView
Returns the collection of geometric elements included in the drawing view sketch.
GeometricElements
property in object Layout2DView
Returns the collection of geometric elements included in the Layout2D view sketch.
GeometricType
property in object GeometricElement
Geometry2D
object
2D wireframe geometric element.
GeometryName
property in object Measurable
Returns the name of the geometry of the measured object.
GeometryRepresentationFormat
property in object Export3DXmlSettingAtt
Returns or sets the format of geometry representation.
Get2dAnnot
method in object Text
Retrieves Drafting text.
Get2dAnnot
method in object Dimension3D
Retrieves Drafting Dimension.
Get3DTextureColor
method in object RenderingMaterial
Returns one color of a 3d texture.
Get3DTextureColorCoefficient
method in object RenderingMaterial
Returns one color coefficient of a 3d texture.
Get3DTextureOrientation
method in object RenderingMaterial
Returns the orientation of a texture.
Get3DTexturePosition
method in object RenderingMaterial
Returns the position of a texture.
Get3DTextureScale
method in object RenderingMaterial
Returns the scale of a texture.
GetAGeometricAttribute
method in object ManufacturingFeature
Retrieve a geometry attribute of a Manufacturing Feature from its name.
GetAGeometricAttribute
method in object ManufacturingOperation
Retrieve a Geometric Attribute of a Manufacturing Operation.
GetAPTCode
method in object ManufacturingOutputGenerator
Retrieve generated APT code.
GetASNavigationModeInfo
method in object SimulationSettingAtt
Retrieves environment informations for the ASNavigationMode parameter.
GetASStepSizeInfo
method in object SimulationSettingAtt
Retrieves environment informations for the ASStepSize parameter.
GetAbsDatas
method in object Shot
Retrieves the data related to the shot.
GetAbsoluteAxisData
method in object Sketch
Returns the sketch axis coordinates in 3D space.
GetAccelColorInfo
method in object DevAnalysisSettingAtt
Retrieves environment informations for the AccelColor parameter.
GetAccelLimitInfo
method in object DevAnalysisSettingAtt
Retrieves environment informations for the AccelLimit parameter.
GetAccelerationValue
method in object GenericMotionProfile
Retrieves acceleration value of the Profile.
GetAccuracyProfile
method in object RobotMotion
Retrieves Accuracy profile.
GetAccuracyProfile
method in object RobGenericController
Get Accuracy profile given name.
GetAccuracyProfileCount
method in object RobGenericController
Get number of Accuracy profiles in controller.
GetAccuracyProfiles
method in object RobGenericController
Get Accuracy profiles list in controller.
GetAccuracyType
method in object GenericAccuracyProfile
Get the accuracy type for the profile.
GetAccuracyValue
method in object GenericAccuracyProfile
Retrieves accuracy value of the profile.
GetAccuratePickingModeInfo
method in object VisualizationSettingAtt
Retrieves information about the AccuratePickingMode setting parameter.
GetAccuratePickingWindowSizeInfo
method in object VisualizationSettingAtt
Retrieves information about the AccuratePickingWindowSize setting parameter.
GetActions
method in object Operation
Retrieves all the Basic Actions under the operation.
GetActivate2DModeInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the Activate2DMode parameter.
GetActivationModeInfo
method in object CacheSettingAtt
Retrieves informations about the Cache activation mode.
GetActivationStateInfo
method in object MemoryWarningSettingAtt
Retrieves environment informations for the memory warning mechanism.
GetActivationStateInfo
method in object DisconnectionSettingAtt
Retrieves informations about the activation mode of automatic disconnection.
GetActiveLight
method in object RenderingShooting
Returns the active light of the shooting using its index.
GetActiveShapeName
method in object Product
Returns the name of the active shape.
GetActiveTask
method in object ActiveTask
Retrieves the Active Task for an activity for a particular Resource.
GetActivities
method in object MachiningProcess
This method gets the Manufacturing Activities referenced by the Machining Process.
GetAdditionalSymbol
method in object DrawingWelding
Returns the additional symbol of the drawing welding.
GetAffiche_AttributInfo
method in object MigrBatchSettingAtt
Retrieves information about the "Display Report Attribute" setting parameter.
GetAlignVector
method in object SchCntrLocation
Get the current alignment vector of the connector.
GetAlignmentConnector
method in object PspPartConnector
Returns the Alignmnet connector.
GetAlignmentDirection
method in object PspPartConnector
Retrieves the alignment direction outward normal to the face place position.
GetAlignmentVector
method in object PspLightConnector
Returns the position of the connector.
GetAllChecksReportInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the AllChecksReport parameter.
GetAllJointsSpeedInfo
method in object HtsJointSpeedSettingsAtt
Retrieves environment informations for the JointSpeed parameter.
GetAllOperations
method in object RobotTask
Retrieves the List of Operations of Robot Task.
GetAllProfileInstances
method in object ParameterProfilesFactory
GetAllResourceFilterInfo
method in object VerifTabSettingAtt
Retrieves environment informations for the "View All Resources" parameter.
GetAllRobotTasks
method in object RobotTaskFactory
Retrieves the list of Robot Tasks owned by a Robot.
GetAllShapesNames
method in object Product
List the name of all shapes.
GetAllTags
method in object AMPPath
Function to get the list of AMPTags by name.
GetAllTasks
method in object ResourceProgramManager
Retrieves all the Tasks corresponding to this Resource.
GetAllZBufferElementModeInfo
method in object VisualizationSettingAtt
Retrieves information about the AllZBufferElementMode setting parameter.
GetAllowDistortionsInfo
method in object FTAInfraSettingAtt
Retrieves information about the Allow Distorsions setting parameter value.
GetAlphabeticOrderInfo
method in object FTASettingAtt
Retrieves informations about the AlphabeticOrder setting parameter value.
GetAlsoDeleteExclusiveParentsInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "AlsoDeleteExclusiveParents" parameter.
GetAlternateStyle
method in object SchGRRRouteAlternate
Returns the graphicl style of the alternate graphic object.
GetAlternateViewInfo
method in object Export3DXmlSettingAtt
GetAmbientActivationInfo
method in object VisualizationSettingAtt
Retrieves information about the AmbientActivation setting parameter.
GetAmbientColor
method in object RenderingMaterial
Returns the ambient color of a material.
GetAnAttribute
method in object ManufacturingPattern
Retreive the attribute of Manufacturing Pattern from its name.
GetAnAttribute
method in object ManufacturingOperation
Retrieve the Attribute of a Manufacturing Operation.
GetAnalysisCacheModeInfo
method in object AnalysisGeneralSettingAtt
Retrieves environment informations for the parameter.
GetAnalysisDisplayModeInfo
method in object FTASettingAtt
Retrieves environment informations for the AnalysisDisplayMode parameter.
GetAnalysisLevelInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnalysisLevel parameter.
GetAnalysisLoadModeInfo
method in object AnalysisGeneralSettingAtt
Retrieves environment informations for the parameter.
GetAnalysisNamingAutoInfo
method in object AnalysisGeneralSettingAtt
Retrieves environment informations for the parameter.
GetAngle
method in object HybridShapeSweepLine
Returns the angle values useful in some linear sweep types.
GetAngle
method in object HybridShapeSweepCircle
Returns the angle values useful in some circular sweep types.
GetAngleBetween
method in object Measurable
Compute the angle between the CATIAMeasurable and another.
GetAngleInfo
method in object IgesSettingAtt
Retrieves information about the Angle setting parameter.
GetAngleLawTypes
method in object HybridShapeSweepCircle
Retrieves angle law types.
GetAngleLimitInfo
method in object FittingSettingAtt
Retrieves environment information for the AngleLimit parameter.
GetAngleMaxToleranceInfo
method in object ToleranceSheetSettingAtt
Retrieves environment informations for the AngleMaxTolerance parameter.
GetAngleMinToleranceInfo
method in object ToleranceSheetSettingAtt
Retrieves environment informations for the AngleMinTolerance parameter.
GetAngleRef
method in object HybridShapeSweepExplicit
Gets the angle value associated to the reference surface.
GetAngleStepInfo
method in object ManipSettingAtt
Retrieves environment informations for the AngleStep parameter.
GetAngulaireGeneralTolClassInfo
method in object FTASettingAtt
Retrieves informations about the Dimension general class tolerance setting parameter value.
GetAngularAccelerationValue
method in object GenericMotionProfile
Get Angular acceleration value of the Profile.
GetAngularLaw
method in object HybridShapeSweepLine
Retrieves the angular law useful in some linear sweep types.
GetAngularSpeedValue
method in object GenericMotionProfile
Retrieves Angular Speed value of the Profile.
GetAngularThreshold
method in object HybridShapeExtractMulti
Returns the AngularThreshold of the list of constraints at specified position.
GetAngularThresholdActivity
method in object HybridShapeExtractMulti
Returns the AngularThresholdActivity of the list of constraints at specified position.
GetAngularTolerance
method in object HybridShapeAssemble
Get the anglular tolerance.
GetAngularToleranceMode
method in object HybridShapeAssemble
Get the anglular tolerance mode.
GetAnimationInfo
method in object Export3DXmlSettingAtt
Retrieves environment informations for the animation setting.
GetAnlAccelLimitInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlAccelLimit parameter.
GetAnlCautionZoneInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlCautionZone parameter.
GetAnlIOAnalysisInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlIOAnalysis parameter.
GetAnlIntDistInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlIntDist parameter.
GetAnlIntfInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlIntf parameter.
GetAnlLinAccelLimitInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlLinAccelLimit parameter.
GetAnlLinSpeedLimitInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlLinSpeedLimit parameter.
GetAnlMeasureInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlMeasure parameter.
GetAnlRotAccelLimitInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlRotAccelLimit parameter.
GetAnlRotSpeedLimitInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlRotSpeedLimit parameter.
GetAnlTravelLimitInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlTravelLimit parameter.
GetAnlVelocityLimitInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AnlVelocityLimit parameter.
GetAnnotDimInvalidColor
method in object FTASettingAtt
Returns the AnnotDimInvalidColor parameter.
GetAnnotDimInvalidColorInfo
method in object FTASettingAtt
Retrieves environment informations for the AnnotDimInvalidColor parameter.
GetAnnotDimInvalidInfo
method in object FTASettingAtt
Locks or unlocks the AnnotDimInvalid parameter.
GetAnnotDimOnDeletedGeomColor
method in object FTASettingAtt
Returns the AnnotDimOnDeletedGeomColor parameter.
GetAnnotDimOnDeletedGeomColorInfo
method in object FTASettingAtt
Retrieves environment informations for the AnnotDimOnDeletedGeomColor parameter.
GetAnnotDimOnDeletedGeomInfo
method in object FTASettingAtt
Retrieves environment informations for the AnnotDimOnDeletedGeom parameter.
GetAnnotDimOnUnloadedGeomColor
method in object FTASettingAtt
Returns the AnnotDimOnUnloadedGeomColor parameter.
GetAnnotDimOnUnloadedGeomColorInfo
method in object FTASettingAtt
Retrieves environment informations for the AnnotDimOnUnloadedGeomColor parameter.
GetAnnotDimOnUnloadedGeomInfo
method in object FTASettingAtt
Retrieves environment informations for the AnnotDimOnUnloadedGeom parameter.
GetAnnotOnZeroZSettingInfo
method in object FTASettingAtt
Retrieves environment informations for the AnnotOnZeroZSetting parameter.
GetAnnotatedViewInfo
method in object Export3DXmlSettingAtt
GetAnnotation3DInfo
method in object Export3DXmlSettingAtt
Retrieves environment informations for the 3D annotation setting.
GetAnnotation3DModeInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the Annotation3DMode parameter.
GetAntiAliasingModeInfo
method in object VisualizationSettingAtt
Retrieves information about the AntiAliasingMode setting parameter.
GetAntiAliasingOffsetInfo
method in object VisualizationSettingAtt
Retrieves information about the AntiAliasingOffset setting parameter.
GetApplObjFactFromVirtualType
method in object SchematicRoot
Returns the object factory for specific schematic application.
GetApplication
method in object PspWorkbench
Returns the PspApplication associated with the input ApplicationID.
GetApplicationObjectFactory
method in object SchematicRoot
Returns the object factory for specific schematic application.
GetApplicativeDataFilterInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the "Applicative Data" parameter.
GetAppliedUnitSymbol
method in object HybridShapeLawDistProj
Returns the applied unit symbol.
GetApplyJoinInfo
method in object IgesSettingAtt
Retrieves information about the Apply Join setting parameter.
GetApplyLabelEffToAltChildInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the ApplyLabelEffToAltChild parameter.
GetArcSelectionActivationInfo
method in object TreeVizManipSettingAtt
Retrieves environment informations for arc-selection mode applied to the specification tree.
GetArea
method in object PrintArea
Gets the printing area defined on an object.
GetAskAnlModeInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the AskAnlMode parameter.
GetAssignedER
method in object EKPServices
Given a type of assignment, this method returns all the ER assigned to the Operation.
GetAssignedViewerInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the "Assigned Viewer" parameter.
GetAsso_modeInfo
method in object V4WritingSettingAtt
Retrieves information about the Asso_mode setting parameter.
GetAssociatedConnectable
method in object PspConnector
Get the connectable-owner of this connector.
GetAssociatedTPS
method in object ManufacturingMachinableGeometry
Retrieves the Annotation object lists associated with a ManufacturingMachinableGeometry object.
GetAssociatedTPSCount
method in object ManufacturingMachinableGeometry
Returns the number of Annotation objects attached to a pointed geometry under a ManufacturingMachinableGeometry object.
GetAssociatedToolTip
method in object HomePosition
Get the tooltips associated with the home position.
GetAthAnnotationInfo
method in object SimulationSettingAtt
Retrieves environment informations for the AthAnnotation parameter.
GetAthDisableSimInfo
method in object SimulationSettingAtt
Retrieves environment informations for the AthDisableSim parameter.
GetAthEndConditionInfo
method in object SimulationSettingAtt
Retrieves environment informations for the AthEndCondition parameter.
GetAthHyperlinkInfo
method in object SimulationSettingAtt
Retrieves environment informations for the AthHyperlink parameter.
GetAthSelAgentDlgInfo
method in object SimulationSettingAtt
Retrieves environment informations for the AthSelAgentDlg parameter.
GetAthStateMgtInfo
method in object SimulationSettingAtt
Retrieves environment informations for the AthStateMgt parameter.
GetAthTextMsgInfo
method in object SimulationSettingAtt
Retrieves environment informations for the AthTextMsg parameter.
GetAthViewpointInfo
method in object SimulationSettingAtt
Retrieves environment informations for the AthViewpoint parameter.
GetAtomicActivities
method in object GenericAction
Retreives the list of Atomic activities for the action.
GetAttAPInfo
method in object StepSettingAtt
Retrieves environment informations for the AttAP parameter.
GetAttASMGVPInfo
method in object StepSettingAtt
Retrieves environment informations for the AttASMGVP parameter.
GetAttASMInfo
method in object StepSettingAtt
Retrieves environment informations for the AttASM parameter.
GetAttAngleDefFitingInfo
method in object StepSettingAtt
Retrieves environment informations for the AttAngleDefFiting parameter.
GetAttAnnotationInfo
method in object StepSettingAtt
Retrieves environment informations for the AttAnnotation parameter.
GetAttFittingInfo
method in object StepSettingAtt
Retrieves environment informations for the AttFitting parameter.
GetAttGVPCOPSInfo
method in object StepSettingAtt
Retrieves environment informations for the AttGVP parameter.
GetAttGVPCOPSSAGInfo
method in object StepSettingAtt
Retrieves environment informations for the AttGVPVA parameter.
GetAttGVPCOPSTolInfo
method in object StepSettingAtt
Retrieves environment informations for the AttGVPVA parameter.
GetAttGVPCdGInfo
method in object StepSettingAtt
Retrieves environment informations for the AttGVPCdG parameter.
GetAttGVPInfo
method in object StepSettingAtt
Retrieves environment informations for the AttGVP parameter.
GetAttGVPVAInfo
method in object StepSettingAtt
Retrieves environment informations for the AttGVPVA parameter.
GetAttGroupModeInfo
method in object StepSettingAtt
Retrieves environment informations for the AttGroupMode parameter.
GetAttHeaderAuthorInfo
method in object StepSettingAtt
Retrieves environment informations for the AttHeaderAuthor parameter.
GetAttHeaderAuthorisationInfo
method in object StepSettingAtt
Retrieves environment informations for the AttHeaderAuthorisation parameter.
GetAttHeaderDescriptionInfo
method in object StepSettingAtt
Retrieves environment informations for the AttHeaderDescription parameter.
GetAttHeaderOrganisationInfo
method in object StepSettingAtt
Retrieves environment informations for the AttHeaderOrganisation parameter.
GetAttIASMInfo
method in object StepSettingAtt
Retrieves environment informations for the AttIASM parameter.
GetAttLayersFiltersInfo
method in object StepSettingAtt
Retrieves environment informations for the AttLayersFilters parameter.
GetAttMultiCADInfo
method in object StepSettingAtt
Retrieves environment informations for the AttMultiCAD parameter.
GetAttOptimizeC2Info
method in object StepSettingAtt
Retrieves environment informations for the AttOptimizeC2 parameter.
GetAttReportInfo
method in object StepSettingAtt
Retrieves environment informations for the AttReport parameter.
GetAttShowInfo
method in object StepSettingAtt
Retrieves environment informations for the AttShow parameter.
GetAttTolDefOptFitInfo
method in object StepSettingAtt
Retrieves environment informations for the AttTolDefOptFit parameter.
GetAttUnitsInfo
method in object StepSettingAtt
Retrieves environment informations for the AttUnits parameter.
GetAttachedOwner
method in object TCPTrace
Retrieves the default attached owner of the trace.
GetAttachedOwner
method in object TCPTraceManager
Retrieves the default attached owner of the trace.
GetAttachmentFactory
method in object AttachmentCont
GetAttribute
method in object WIText
This gets the value of the Attribute.
GetAttribute
method in object ManufacturingTool
Retrieve by is name the attribute of a Manufacturing Tool.
GetAttribute
method in object ManufacturingInsert
Retrieve by is name the attribute of an insert object.
GetAttribute
method in object ManufacturingMachine
Retrieve the Attribute of a Manufacturing Machine.
GetAttribute
method in object ManufacturingActivity
Retreive the Attribute of a Manufacturing Activity.
GetAttribute
method in object ManufacturingToolMotion
Retrieve by is name the attribute of a Manufacturing ToolMotion.
GetAttribute
method in object ManufacturingToolAssembly
Returns an attribute of a tool assembly.
GetAttributeNLSName
method in object ManufacturingTool
Retrieve the NLS name from the attribute name of a Manufacturing Tool.
GetAttributeNLSName
method in object ManufacturingInsert
Gives the NLS value of an insert object Example: The following example gives in NLSresult the NLS value of the "MFG_COMMENT" attributes of the insert CurrentInsert NLSresult = CurrentInsert.
GetAttributeNLSName
method in object ManufacturingMachine
Retrieve the NLS name from the attribute name of a Manufacturing Machine.
GetAttributeNLSName
method in object ManufacturingActivity
Retrieve the NLS name from the attribute name of a Manufacturing Activity.
GetAttributeNLSName
method in object ManufacturingToolAssembly
Returns the NLS value of an attribute.
GetAttributeValue
method in object ParameterProfiles
GetAttributeValueReal
method in object AMPTag
Function to get the value of the given real attribute on the given AMPTag.
GetAttributeValueString
method in object AMPTag
Function to get the value of the given string attribute on the given AMPTag.
GetAttributesFilterInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the "Attributes" parameter.
GetAuthorNameInfo
method in object IgesSettingAtt
Retrieves environment informations for the AuthorName parameter.
GetAuthorOrganizationInfo
method in object IgesSettingAtt
Retrieves environment informations for the AuthorOrganization parameter.
GetAutoCCPInfo
method in object HtsCCPSettingAtt
Retrieves environment informations for the AutoCCP parameter.
GetAutoExpandActivationInfo
method in object TreeVizManipSettingAtt
Retrieves environment informations for automatic expand mode applied to the specification tree.
GetAutoLoadMfgCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the AutoLoadMfgCtx parameter.
GetAutoLoadSrvMfgCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the AutoLoadSrvMfgCtx parameter.
GetAutoLoadVolCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the AutoLoadVolCtx parameter.
GetAutoPreviewModeInfo
method in object AnalysisPostProSettingAtt
Retrieves environment informations for the AutoPreviewMode parameter.
GetAutoReframeFilterInfo
method in object VerifTabSettingAtt
Retrieves environment informations for the "Auto Reframe" parameter.
GetAutoSaveInfo
method in object GeneralSessionSettingAtt
Retrieves environment informations for the data save parameter.
GetAutoScrollActivationInfo
method in object TreeVizManipSettingAtt
Retrieves environment informations for automatic scrolling mode applied to the specification tree.
GetAutoSwitchToDesignModeInfo
method in object AsmGeneralSettingAtt
Retrieves the state of the implicit switch from visualization mode to design mode setting parameter.
GetAutoUpdateModeInfo
method in object AsmGeneralSettingAtt
Retrieves informations about the automatic update setting parameter.
GetAutoWalkActColorInfo
method in object HtsTaskDisplaySettingAtt
Retrieves environment informations for the AutoWalkActColor parameter.
GetAutoWalkActLineTypeInfo
method in object HtsTaskDisplaySettingAtt
Retrieves environment informations for the AutoWalkActLineType parameter.
GetAutoWalkActLineWeightInfo
method in object HtsTaskDisplaySettingAtt
Retrieves environment informations for the AutoWalkActLineWeight parameter.
GetAuxAttribute
method in object AMPTag
Function to get an auxilliary attribute value of the given AMPTag.
GetAuxAttributeNum
method in object AMPTag
Function to get the number of auxilliary attributes of the given AMPTag.
GetAuxAxesValues
method in object AMPTag
Function to get the auxilliary axes values of the given AMPTag.
GetAuxiliaryDrillViewerInfo
method in object VisualizationSettingAtt
Retrieves information about the AuxiliaryDrillViewer setting parameter.
GetAuxillaryAxisHome
method in object RobotMotion
Retrieves the underlying Auxillary device Home.
GetAuxillaryAxisValues
method in object RobotMotion
Retrieves the underlying Auxillary device Joint values.
GetAxis
method in object Parabola2D
GetAxis
method in object Hyperbola2D
GetAxis
method in object HybridShapeCircle
Returns the axis of the Circle.
GetAxis
method in object Measurable
Retrieves the axis vector of the cylinder or a cone.
GetAxisSystem
method in object Measurable
Retrieves the information of the axis system.
GetAxisSystemSizeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "AxisSystemSize" parameter.
GetAxisSysteme
method in object DrawingViewGenerativeBehavior
Retrieves the axis systeme associated with the view.
GetBKTAccessRightsInfo
method in object BehaviorSettingAtt
Retrieves environment informations for the BKTAccessRights parameter.
GetBKTBehaviorOperationMessageInfo
method in object BehaviorSettingAtt
Retrieves environment informations for the BKTBehaviorOperationMessage parameter.
GetBKTSpecificationTreeInfo
method in object BehaviorSettingAtt
Retrieves environment informations for the BKTSpecificationTree parameter.
GetBackClippingPlaneInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the BackClippingPlane parameter.
GetBackFaceCullingMode
method in object VisualizationSettingAtt
Retrieves the BackFaceCullingMode parameter.
GetBackFaceCullingModeInfo
method in object VisualizationSettingAtt
Retrieves information about the BackFaceCullingMode setting parameter.
GetBackgroundColor
method in object Viewer
Gets the viewer's background color.
GetBackgroundImageModeInfo
method in object AnalysisReportingSettingAtt
Retrieves environment informations for the BackgroundImageMode parameter.
GetBackgroundRGB
method in object VisualizationSettingAtt
Returns the BackgroundRGB parameter.
GetBackgroundRGBInfo
method in object VisualizationSettingAtt
Retrieves information about the BackgroundRGB setting parameter.
GetBaultText
method in object DrawingDimValue
Get bault text of dimension value.
GetBeepModeInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the BeepMode parameter.
GetBendData
method in object PspLightBend
Returns the list of bend radii.
GetBestCntrForRoute
method in object SchCompatible
Find the best-fit connector to be used to connect a route to.
GetBestFitInsertInfo
method in object SchCompatible
Find the best-fit connector(s) to be used for inserting a component into a route.
GetBestFitPlaceInfo
method in object SchCompatible
Find the best-fit connector(s) to be used for placing a component and connecting it to another.
GetBodiesUnderOperationsInTreeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "BodiesUnderOperationsInTree" parameter.
GetBodyHideInCaptureInfo
method in object FTASettingAtt
Retrieves informations about the Visibility of Part instances, bodies and geometrical sets in Capture.
GetBodyToHeal
method in object HybridShapeHealing
Returns the body to be healed from the list at specified position.
GetBooleanAttribute
method in object E5Property
GetBorderEdgesModeInfo
method in object VisualizationSettingAtt
Retrieves information about the BorderEdgesMode setting parameter.
GetBorderEdgesRGB
method in object VisualizationSettingAtt
Returns the BorderEdgesRGB parameter.
GetBorderEdgesRGBInfo
method in object VisualizationSettingAtt
Retrieves information about the BorderEdgesRGB setting parameter.
GetBorderEdgesThicknessInfo
method in object VisualizationSettingAtt
Retrieves information about the BorderEdgesThickness setting parameter.
GetBorderMode
method in object HybridShapeBlend
Returns the type of border to a limit of the blend.
GetBoundAtPosition
method in object HybridShapeFill
Retrieves the boundary at specified position in the hybrid shape fill feature object.
GetBoundPosition
method in object HybridShapeFill
Retrieves the position of a boundary used by the hybrid shape fill feature object.
GetBoundSize
method in object HybridShapeFill
Returns the number of boundaries in the Fill object.
GetBoundaries2DLColor
method in object Layout2DSettingAtt
Returns the Boundaries2DLColor parameter.
GetBoundaries2DLColorInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the Boundaries2DLColor parameter.
GetBoundaries2DLDisplayInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the Boundaries2DLDisplay parameter.
GetBoundaries2DLLineTypeInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the Boundaries2DLLineType parameter.
GetBoundaries2DLThicknessInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the Boundaries2DLThickness parameter.
GetBoundary
method in object Shapes
Returns a boundary using its label.
GetBoundary
method in object Sketches
Returns a boundary using its label.
GetBoundary
method in object HybridShapes
Returns a boundary using its label.
GetBoundaryBox
method in object DrawingDimension
Get boundary box coordinates of dimension value.
GetBoundaryContinuity
method in object HybridShapeFill
Returns the continuity mode for a boundary at specified position in the Fill.
GetBoundaryPoints
method in object SchBoundaryElem
Get the definition points (segments end points) of one side of the boundary.
GetBoundingBoxSelectionModeInfo
method in object VisualizationSettingAtt
Retrieves information about the BoundingBoxSelectionMode setting parameter.
GetBoxDisplayInfo
method in object MeasureSettingAtt
Retrieves environment informations for the BoxDisplay parameter.
GetBranchIDs
method in object MHILoadParameters
Gets the "subcompitem" IDs (oid) of the Branch.
GetCATFTAChamferGeneralTolClassInfo
method in object FTASettingAtt
Retrieves environment informations for the CATFTAChamferGeneralTolClass parameter.
GetCATFTAEdgesColor
method in object FTASettingAtt
Returns the GetCATFTAEdgesColor parameter.
GetCATFTAEdgesColorInfo
method in object FTASettingAtt
Retrieves environment informations for the GetCATFTAEdgesColor parameter.
GetCATFTAEdgesLineTypeInfo
method in object FTASettingAtt
Retrieves environment informations for the CATFTAEdgesLineType parameter.
GetCATFTAEdgesThicknessInfo
method in object FTASettingAtt
Retrieves environment informations for the CATFTAEdgesThickness parameter.
GetCATFTAUFAutoTolerancingInfo
method in object FTASettingAtt
Retrieves environment informations for the CATFTAUFAutoTolerancing parameter.
GetCATFTAUseLastTolerancesInfo
method in object FTASettingAtt
Retrieves environment informations for the CATFTAUseLastTolerances parameter.
GetCOG
method in object Measurable
Retrieves the position of the center of gravity of a surface and volume .
GetCOGPosition
method in object Inertia
Retrieves the position of the center of gravity.
GetCacheMaxSizeMoInfo
method in object CacheSettingAtt
Retrieves environment informations for the Cache maximum size.
GetCalibReferenceFile
method in object CalibOffsets
Retrieve the reference calibration file.
GetCalloutCreationDialogBoxInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the CalloutCreationDialogBox parameter.
GetCartesianTarget
method in object RobotMotion
Retrieves the Robot Cartesian target.
GetCautionColorInfo
method in object DevAnalysisSettingAtt
Retrieves environment informations for the CautionColor parameter.
GetCautionZoneInfo
method in object DevAnalysisSettingAtt
Retrieves environment informations for the CautionZone parameter.
GetCellAlignment
method in object DrawingTable
Retrieves the alignment of the pointed cell of a drawing table.
GetCellBorderType
method in object DrawingTable
Retrieves the drawing text contained in the cell of a drawing table.
GetCellName
method in object DrawingTable
Returns the name of a table cell.
GetCellObject
method in object DrawingTable
Retrieves the object contained in the cell of a drawing table.
GetCellString
method in object DrawingTable
Returns the string contained in the cell of a drawing table.
GetCellsMerge
method in object DrawingTable
Returns the merge cells.
GetCenter
method in object Circle2D
GetCenter
method in object Ellipse2D
GetCenter
method in object Parabola2D
GetCenter
method in object Hyperbola2D
GetCenter
method in object HybridShapeCircle
Gets the mathematical center of the circle.
GetCenter
method in object Measurable
Retrieves the position of the center of a circle or sphere.
GetCenterOfGravity
method in object StrComputeServices
Retreive the center of gravity for a structure object.
GetCentroid
method in object GenericToolProfile
Retrieve the underlying x,y,z of the Tool centroid.
GetCheckReportHtmlInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the CheckReportHtml parameter.
GetChild
method in object DNBAttachment
Get the Child Product of the Attachment.
GetChildMA
method in object DNBAttachment
GetChildren
method in object StiDBItem
GetChoiceNbSurfaces
method in object HybridShapeSweepLine
Gets a sequence which identifies a solution amongst all possibilities of a line-profile swept surface, case CATGSMLinearSweep_TwoTangencySurfaces.
GetChoiceNo
method in object HybridShapeSweepLine
Retrieves the choice number associated with each solution of a given linear sweep case.
GetChoiceNo
method in object HybridShapeLineBiTangent
Returns a sequence which identifies a solution among all possibilities.
GetClashModeInfo
method in object ManipSettingAtt
Retrieves environment informations for the ClashMode parameter.
GetClashSoundInfo
method in object ManipSettingAtt
Retrieves environment informations for the ClashSound parameter.
GetClashWhileMovingInfo
method in object FittingSettingAtt
Retrieves environment information for the AskAnlMode parameter.
GetCleanTolCheckInfo
method in object V4WritingSettingAtt
Retrieves information about the CleanTolCheck setting parameter.
GetCleanTolValueInfo
method in object V4WritingSettingAtt
Retrieves information about the CleanTolValue setting parameter.
GetClearanceVoxelInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the ClearanceVoxel parameter.
GetClip
method in object DrawingDimension
Gets informations of the dimension clipping.
GetClippingFrameInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the ClippingFrame parameter.
GetClippingFrameReframeOnModeInfo
method in object Layout2DSettingAtt
GetClippingModeInfo
method in object SectioningSettingAtt
Retrieves environment informations for the ClippingMode parameter.
GetClippingViewOutlineColor
method in object Layout2DSettingAtt
Returns the ClippingViewOutlineColor parameter.
GetClippingViewOutlineColorInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the ClippingViewOutlineColor parameter.
GetClippingViewOutlineLinetypeInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the ClippingViewOutlineLinetype parameter.
GetClippingViewOutlineThicknessInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the ClippingViewOutlineThickness parameter.
GetClosingPoint
method in object HybridShapeBlend
Returns the closing point of a closed curve of the blend.
GetClosure
method in object HybridShapeSpline
Gets whether the curve is closed.
GetCode_pageInfo
method in object InteropSettingAtt
Retrieves information about the "Reading Code page" setting parameter.
GetCode_page_DestInfo
method in object V4WritingSettingAtt
Retrieves information about the Code_page_Dest setting parameter.
GetCollWalkClearanceInfo
method in object HtsGeneralSettingAtt
GetCollapseExpandFilterInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the "Disable Collapse/Expand" parameter.
GetCollisionSearchIntensityInfo
method in object HtsGeneralSettingAtt
GetColor
method in object TCPTrace
Get the TCP trace component (DNBTCPTraceReps) color.
GetColor
method in object RenderingLight
Returns the color of a light.
GetColorBackgroundModeInfo
method in object VisualizationSettingAtt
Retrieves information about the ColorBackgroundMode setting parameter.
GetColorSynchronizationEditabilityInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ColorSynchronizationEditability" parameter.
GetColorSynchronizationModeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ColorSynchronizationMode" parameter.
GetColumnSize
method in object DrawingTable
Returns the width of a column of a drawing table.
GetColumnsNumber
method in object BasicComponent
Return one of the dimensions information of the Basic Component structure.
GetCommandValues
method in object Mechanism
Allows to retrieve current state of the mechanism.
GetCompGroupFromCatalog
method in object SchematicRoot
Returns specific component group entry in a schematic component catalog document.
GetCompSymbolFromCatalog
method in object SchematicRoot
Returns specific entry in a schematic component catalog document.
GetCompanionPathInfo
method in object DocumentationSettingAtt
Retrieves environment informations for the User Companion location parameter.
GetCompartment
method in object PspAppFactory
Instanciate a compartment from the catalog into the current Product.
GetCompassPosInfo
method in object HtsCCPSettingAtt
Retrieves environment informations for the CompassPos parameter.
GetCompatiblePartTypes
method in object PspFunctional
Retrieves a list of all physical part types that are compatible with this function.
GetComplementaryExtractMulti
method in object HybridShapeExtractMulti
Returns the Complementary flag checked/unchecked of the list of constraints at specified position.
GetComponents
method in object Position
Returns the components of an object's position.
GetComponents
method in object SchematicRoot
Returns a list of schematic component instances under the root.
GetCompute3DCut
method in object ThreeDCuts
Computes the 3DCut on the selected products (better signature).
GetCompute3DCutWithAReference
method in object ThreeDCuts
Computes the 3DCut on the selected products, according to a reference product (better signature).
GetConferencingInfo
method in object GeneralSessionSettingAtt
Retrieves environment informations for the conference driver parameter.
GetConfig
method in object AMPTag
Function to get the config value of the given AMPTag.
GetConfig
method in object RobotMotion
Retreives the Configuration.
GetConnectorByName
method in object PspConnectable
Retrieves a connector with the given name.
GetConnectorMathPlane
method in object PspPartConnector
Returns the 9 doubles values for plane contains the connector position (plane origin), alignment direction (plane z-axis), and the up direction (plane y-axis).
GetConnex
method in object HybridShapeAssemble
Get the connex checker flag.
GetConstraint
method in object MoveToPostureActivity
GetConstraintAtPosition
method in object HybridShapeFill
Retrieves the constraint at specified position in the hybrid shape fill feature object.
GetConstraintCreationModeInfo
method in object AsmConstraintSettingAtt
Retrieves informations about the constraint creation setting parameter.
GetConstraintElement
method in object Constraint
Reads an element of a constraint.
GetConstraintElement
method in object SWKIKConstraint
Returns a reference to the target object of the constraint (if any).
GetConstraintType
method in object HybridShapeSpline
Returns the ControlPoint type at the given position.
GetConstraintVisuLocation
method in object Constraint
Returns the constraint visualisation location.
GetConstraintsInGeometryInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ConstraintsInGeometry" parameter.
GetConstraintsNodeInTreeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ConstraintsNodeInTree" parameter.
GetConstraintsSimulInfo
method in object HtsGeneralSettingAtt
Retrieves environment informations for the ConstraintsSimul parameter.
GetConstraintsSize
method in object HybridShapeFill
Returns the number of constraints in the Fill object.
GetContextualFeaturesSelectableAtCreationInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ContextualFeaturesSelectableAtCreation" parameter.
GetContinuity
method in object HybridShapeBlend
Retrieves the continuity of a limit of the blend.
GetContourSide
method in object ManufacturingPrismaticMachiningArea
Gets the side of one contour of a Manufacturing Prismatic Machining Area.
GetControlPoints
method in object Spline2D
Returns the control points making up the spline.
GetController
method in object GenericToolProfile
Retrieves controller owning the profile.
GetController
method in object GenericMotionProfile
Retrieves controller owning the profile.
GetController
method in object GenericObjFrameProfile
Retrieves controller owning the profile.
GetController
method in object GenericAccuracyProfile
Retrieves controller owning the profile.
GetConversionTechnologyInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the ConversionTechnology parameter.
GetConversion_TableInfo
method in object InteropSettingAtt
Retrieves information about the "Characters Equivalence Table Path" setting parameter.
GetCoordinates
method in object Point
Gets cartesian coordinates of the point.
GetCoordinates
method in object Point2D
GetCoordinates
method in object SelectedElement
Returns the coordinates of the pick point.
GetCoordinates
method in object StrAnchorPoint
Retrieves the coordinates of the anchor point.
GetCoordinates
method in object StrMemberExtremity
Retrieves the coordinates of the extremity.
GetCorrectedBaseOffset
method in object CalibOffsets
Retrieve corrected base offset for the robot base wrt robot base reference position.
GetCorrectedToolOffset
method in object CalibOffsets
Retrieve corrected tool offset for the robot wrt robot mount position.
GetCorrector
method in object ManufacturingTool
Retreive the corrector (index) of a Manufacturing tool.
GetCount
method in object FastenerGroup
Returns the number of entities in the fastener group of the Type.
GetCreateAssociativeUseEdgesInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the CreateAssociativeUseEdges parameter.
GetCreateNewSheetFromInfo
method in object DraftingSettingAtt
Retrieves environment informations for the CreateNewSheetFrom parameter.
GetCreationMode
method in object HybridShapeRotate
Gets the creation mode.
GetCreationMode
method in object HybridShapeTranslate
Gets the creation mode.
GetCrvModInfo
method in object IgesSettingAtt
Retrieves information about the Export BSpline mode setting parameter.
GetCurrentAccuracyProfile
method in object RobGenericController
Get current Accuracy profile name used in controller.
GetCurrentApplicationID
method in object SchSession
Get the current application ID.
GetCurrentDocument
method in object SchSession
Get the current document.
GetCurrentMotionProfile
method in object RobGenericController
Get current Motion profile name used in controller.
GetCurrentObjFrameProfile
method in object RobGenericController
Get current ObjFrame profile name used in controller.
GetCurrentObject
method in object ManufacturingOutputGenerator
Get current object from buffer.
GetCurrentPosInfo
method in object HtsCCPSettingAtt
Retrieves environment informations for the CurrentPos parameter.
GetCurrentToolProfile
method in object RobGenericController
Get current tool profile name used in controller.
GetCurvature
method in object Curve2D
Returns the curvature and curvature direction at the parameter specified.
GetCurvatureRadius
method in object HybridShapeSpline
Returns the curvature radius value for each point of the spline.
GetCurvatureThreshold
method in object HybridShapeExtractMulti
Returns the CurvatureThreshold of the list of constraints at specified position.
GetCurvatureThresholdActivity
method in object HybridShapeExtractMulti
Returns the CurvatureThresholdActivity of the list of constraints at specified position.
GetCurve
method in object HybridShapeBlend
Returns a curve from the blend.
GetCurves
method in object HybridShapeWrapCurve
Returns a curve from the WrapCurve.
GetCustomBackgroundImageInfo
method in object AnalysisReportingSettingAtt
Retrieves environment informations for the CustomBackgroundImage parameter.
GetCustomImageFormatInfo
method in object AnalysisReportingSettingAtt
Retrieves environment informations for the CustomImageFormat parameter.
GetCustomImageHeightInfo
method in object AnalysisReportingSettingAtt
Retrieves environment informations for the CustomImageHeight parameter.
GetCustomImageWidthInfo
method in object AnalysisReportingSettingAtt
Retrieves environment informations for the CustomImageWidth parameter.
GetCustomerFactory
method in object Part
Returns a customer factory from a code string defined by the customer.
GetCutPoint
method in object HybridShapeSweep
GetCuttingElem
method in object HybridShapeSplit
Gets the cutting feature at a given index (a point, a curve or a surface).
GetDLName
method in object DLNameSettingAtt
Retrieves the mapping between a logical name and the physical path.
GetDLNameCreationRightInfo
method in object DLNameSettingAtt
Retrieves the state of the parameter DLNameCreationRight.
GetDLNameExp
method in object DLNameSettingAtt
Retrieves the mapping between a logical name and the physical path.
GetDLNameInfo
method in object DLNameSettingAtt
Retrieves the state of the for a given DLName.
GetDLNameList
method in object DLNameSettingAtt
Retrieves the list of the DLNames.
GetDLNameSubList
method in object DLNameSettingAtt
Retrieves the list of the Sub-DLNames.
GetDMUClashPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUClashPreview parameter.
GetDMUCut3DPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUCut3DPreview parameter.
GetDMUDistancePreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUDistancePreview parameter.
GetDMUFreeSpacePreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUFreeSpacePreview parameter.
GetDMUGroupPreviewHiddenObjectsColor
method in object N4DNavigatorSettingAtt
Returns the color for the display of hidden objects in DMU Group Preview.
GetDMUGroupPreviewHiddenObjectsColorInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUGroupPreviewHiddenObjectsColor parameter.
GetDMUGroupPreviewHiddenObjectsDisplayModeInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUGroupPreviewHiddenObjectsDisplayMode parameter.
GetDMUGroupPreviewHiddenObjectsLowIntInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUGroupPreviewHiddenObjectsLowInt parameter.
GetDMUGroupPreviewHiddenObjectsOpacityInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUGroupPreviewHiddenObjectsOpacity parameter.
GetDMUGroupPreviewHiddenObjectsPickInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUGroupPreviewHiddenObjectsPick parameter.
GetDMUGroupPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUGroupPreview parameter.
GetDMUMergerPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUMergerPreview parameter.
GetDMUOffsetPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUOffsetPreview parameter.
GetDMUReviewNameInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUReviewName parameter.
GetDMUSectionPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUSectionPreview parameter.
GetDMUShuttlePreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUShuttlePreview parameter.
GetDMUSilhouettePreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUSilhouettePreview parameter.
GetDMUSimplifPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUSimplifPreview parameter.
GetDMUSweptVolPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUSweptVolPreview parameter.
GetDMUThicknessPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUThicknessPreview parameter.
GetDMUVibrationVolPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUVibrationVolPreview parameter.
GetDMUWrappingPreviewInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the DMUWrappingPreview parameter.
GetDOFActivation
method in object ABQDisplacementBC
GetDOFValues
method in object BasicDevice
Get the DOF values for the device.
GetDOFValues
method in object HomePosition
Get the DOF values for the home position.
GetDatas
method in object Shot
Retrieves the data related to the shot.
GetDatumConnector
method in object PspPartConnector
Returns the Datum connector.
GetDecimalReadOnly
method in object UnitsSheetSettingAtt
Returns the number of decimals for ReadOnly number.
GetDecimalReadWrite
method in object UnitsSheetSettingAtt
Returns the number of decimals for ReadWrite number.
GetDedicatedFilterTypeInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the DedicatedFilterType parameter.
GetDeepSearchActivationInfo
method in object SearchSettingAtt
Retrieves information about the Deep Search Activation setting parameter.
GetDefaultAnalysisFlagInfo
method in object AnalysisGeneralSettingAtt
Retrieves environment informations for the default flag.
GetDefaultAnalysisTemplateInfo
method in object AnalysisGeneralSettingAtt
Retrieves environment informations for the default template.
GetDefaultDiffuseAmbientCoefficientInfo
method in object VisualizationSettingAtt
Retrieves information about the DefaultDiffuseAmbientCoefficient setting parameter.
GetDefaultMacroLibraries
method in object MacrosSettingAtt
Returns the list of default macro libraries.
GetDefaultMacroLibrariesInfo
method in object MacrosSettingAtt
Retrieves environment informations for the default macro libraries setting.
GetDefaultPowerInputContextPriorityInfo
method in object SearchSettingAtt
Retrieves information about the Default Power Input Context Priority setting parameter.
GetDefaultPowerInputContextScopeInfo
method in object SearchSettingAtt
Retrieves information about the Default Power Input Context Scope setting parameter.
GetDefaultPowerInputPrefixInfo
method in object SearchSettingAtt
Retrieves information about the Default Power Input Prefix setting parameter.
GetDefaultShapeName
method in object Product
Returns the default shape.
GetDefaultShininessInfo
method in object VisualizationSettingAtt
Retrieves information about the DefaultShininess setting parameter.
GetDefaultSpecularCoefficientInfo
method in object VisualizationSettingAtt
Retrieves information about the DefaultSpecularCoefficient setting parameter.
GetDefaultSpeedInfo
method in object FittingSettingAtt
Retrieves environment information for the DefaultSpeed parameter.
GetDefaultStyleSheetInfo
method in object FASReportingSettingAtt
Gets information on "OLP Robot Program Directory" parameter.
GetDefaultTimeInfo
method in object FittingSettingAtt
Retrieves environment information for the DefaultTime parameter.
GetDefaultToleranceInfo
method in object ToleranceSheetSettingAtt
Retrieves environment informations for the DefaultTolerance parameter.
GetDefaultWalkSpeedInfo
method in object HtsGeneralSettingAtt
Retrieves environment informations for the DefaultWalkSpeed parameter.
GetDefinition
method in object Scene
Returns the product's definition.
GetDefinition
method in object PspLightPart
Retrieves the points defining the object.
GetDeleteWarningBoxInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "DeleteWarningBox" parameter.
GetDemoModeInfo
method in object LicenseSettingAtt
Retrieves information about the DemoMode setting parameter.
GetDerivatives
method in object Curve2D
Returns the first, second and third derivatives at the parameter specified.
GetDescription
method in object Scene
Returns the product's description.
GetDesignModeInfo
method in object DMUTolSettingAtt
Retrieves informations about the Design Mode setting parameter value.
GetDesignReviewInfo
method in object Export3DXmlSettingAtt
Retrieves environment informations for the Design Review setting.
GetDesignTablesCopyDataInfo
method in object KnowledgeSheetSettingAtt
Retrieves environment informations for the DesignTablesCopyData parameter.
GetDesignTablesSynchronizationInfo
method in object KnowledgeSheetSettingAtt
Retrieves environment informations for the DesignTablesSynchronization parameter.
GetDesignXYZYPR
method in object PointFastener
eturns Design data of the fastener.
GetDetailingID
method in object MHILoadParameters
GetDetailingNames
method in object MHISaveAccess
Gets the name of the currently loaded detailing and the names of all the other detailings that exist for the loaded object.
GetDetailsModeExplodeInfo
method in object V4V5SpaceSettingAtt
Retrieves information about the Details Migration Mode setting parameter.
GetDetailsModeUsualInfo
method in object V4V5SpaceSettingAtt
Retrieves information about the Details Migration Mode setting parameter.
GetDetailsModeWireframeInfo
method in object V4V5SpaceSettingAtt
Retrieves information about the Details Migration Mode setting parameter.
GetDeviation
method in object HybridShapeAssemble
Get the deviation value.
GetDeviceDOFValues
method in object DOFState
Get the DOF values for the device.
GetDiffuseColor
method in object RenderingMaterial
Returns the diffuse color of a material.
GetDimAfterCreInfo
method in object FTASettingAtt
Retrieves informations about the Dimension After Creation setting parameter value.
GetDimAfterModInfo
method in object FTASettingAtt
Retrieves informations about the Dimension After Modification setting parameter value.
GetDimBeforeCreInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Before Creation setting parameter value.
GetDimBeforeModInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Before Modification setting parameter value.
GetDimBlankingCreInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Blanking Creation setting parameter value.
GetDimBlankingModInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Blanking Modification setting parameter value.
GetDimConfigureSnappingInfo
method in object FTASettingAtt
Retrieves informations about the DimMoveSubPart setting parameter value.
GetDimConstantOffsetInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Constant Offset setting parameter value.
GetDimCreateOnInfo
method in object FTASettingAtt
Retrieves informations about the DimCreateOn setting parameter value.
GetDimExtLine
method in object DrawingDimension
Returns the drawing extension line of the drawing dimension.
GetDimLine
method in object DrawingDimension
Returns the drawing dimension line of the drawing dimension.
GetDimLineDir
method in object DrawingDimLine
Returns direction of a dimension line in case of a DrwDimUserDefined representation mode.
GetDimLinePosValueInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Line Position Value setting parameter value.
GetDimLineUpBaseAngleInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Line Up Base Angle setting parameter value.
GetDimLineUpBaseLengthInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Line Up Base Length setting parameter value.
GetDimLineUpCumulInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Line Up Cululated setting parameter value.
GetDimLineUpFunnelInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Line Up Funnel setting parameter value.
GetDimLineUpOffsetBetDimAngleInfo
method in object FTASettingAtt
Retrieves informations about the DimLineUpOffsetBetDimAngle setting parameter value.
GetDimLineUpOffsetBetDimLengthInfo
method in object FTASettingAtt
Retrieves informations about the DimLineUpOffsetBetDimLength setting parameter value.
GetDimLineUpOffsetToRefAngleInfo
method in object FTASettingAtt
Retrieves informations about the DimLineUpOffsetToRefAngle setting parameter value.
GetDimLineUpOffsetToRefLengthInfo
method in object FTASettingAtt
Retrieves informations about the DimLineUpOffsetToRefLength setting parameter value.
GetDimLineUpStackInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Line Up Stack setting parameter value.
GetDimManualPositionningInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Manual Positionning setting parameter value.
GetDimMove2dPartCreInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Move 2D Creation setting parameter value.
GetDimMove2dPartModInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Move 2D Modification setting parameter value.
GetDimMoveDimLineCreInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Move Dimension Line Creation setting parameter value.
GetDimMoveDimLineModInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Move Dimension Line Modification setting parameter value.
GetDimMoveLeaderCreInfo
method in object FTASettingAtt
Retrieves informations about the Dimension leader Creation setting parameter value.
GetDimMoveLeaderModInfo
method in object FTASettingAtt
Retrieves informations about the Dimension leader modification setting parameter value.
GetDimMoveSubPartInfo
method in object FTASettingAtt
Retrieves informations about the DimMoveSubPart setting parameter value.
GetDimMoveValueCreInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Move Value Creation setting parameter value.
GetDimMoveValueModInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Move Value Modification setting parameter value.
GetDimORunCreInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Over Run Creation setting parameter value.
GetDimORunModInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Over Run Modification setting parameter value.
GetDimOriDefaultSymbInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Orientation Default Symbol setting parameter value.
GetDimSnappingInfo
method in object FTASettingAtt
Retrieves informations about the Dimension Snapping setting parameter value.
GetDimension
method in object ArrangementItemReservation
Returns the Dimensions of the ArrangementItemReservation.
GetDimensionsDisplayInfo
method in object UnitsSheetSettingAtt
Retrieves information about the DimensionsDisplay setting parameter.
GetDirection
method in object Line
Role : Returns the unit-vector pointing in the direction of the line.
GetDirection
method in object Hole
Returns the hole direction with absolute coordinates.
GetDirection
method in object Prism
Returns the prism direction with absolute coordinates.
GetDirection
method in object LightSource
Returns the lighting direction as an array of 3 variants.
GetDirection
method in object Line2D
Returns the unit-vector pointing in the direction of the line.
GetDirection
method in object CylindricalFace
GetDirection
method in object AssemblyHole
Retrieves the hole direction vector components.
GetDirection
method in object Measurable
Retrieves the direction of the line.
GetDirection
method in object AssemblyPocket
Retrieves the pocket direction vector components.
GetDirection
method in object RectilinearBiDimFeatEdge
Returns the direction of the rectilinear edge.
GetDirection
method in object ManufacturingHole
Returns the hole direction with absolute coordinates.
GetDirection
method in object RectilinearTriDimFeatEdge
GetDirection
method in object RectilinearMonoDimFeatEdge
GetDirection
method in object ManufacturingMachinableGeometry
Retrieves the direction of a pointed geometry under a ManufacturingMachinableGeometry object.
GetDirectionInversion
method in object HybridShapeSpline
Gets the orientation of the tangent direction .
GetDirectoryForInputXslInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the DirectoryForInputXsl parameter.
GetDisplayAnlStatusInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the DisplayAnlStatus parameter.
GetDisplayBackAndCuttingPlaneInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the DisplayBackAndCuttingPlane parameter.
GetDisplayClippingOutlineInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the DisplayClippingOutline parameter.
GetDisplayCurrentScaleInfo
method in object VisualizationSettingAtt
Retrieves information about the SetStereoModeLock setting parameter.
GetDisplayCutInWireframeInfo
method in object SectioningSettingAtt
Retrieves environment informations for the DisplayCutInWireframe parameter.
GetDisplayDrillListInfo
method in object VisualizationSettingAtt
Retrieves information about the DisplayDrillList setting parameter.
GetDisplayGeomOnScrollingInfo
method in object TreeVizManipSettingAtt
Retrieves environment informations for "display geometry on scrolling" mode.
GetDisplayGeometryAfterCurrentInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "DisplayGeometryAfterCurrent" parameter.
GetDisplayImmersiveDrillViewerInfo
method in object VisualizationSettingAtt
Retrieves information about the DisplayImmersiveDrillViewer setting parameter.
GetDisplayModeInfo
method in object InteropSettingAtt
Retrieves information about the "Display only elements with Sensitive Attribute" setting parameter.
GetDisplayNameModeInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the "Display Name Mode" parameter.
GetDisplayOrderInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the 'Display Order' parameter.
GetDisplayProcessOrderInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the 'Display Order for Processes' parameter.
GetDisplayResetButtonInfo
method in object DraftingSettingAtt
Retrieves environment informations for the DisplayResetButton parameter.
GetDisplayTrailingZerosInfo
method in object UnitsSheetSettingAtt
Retrieves environment informations for the DisplayTrailingZeros parameter.
GetDisplayUnit
method in object DrawingDimValue
Get display unit of dimension value.
GetDisplayV4Text3DInfo
method in object InteropSettingAtt
Retrieves information about the "Display 3D elements labels" setting parameter.
GetDistanceStepInfo
method in object ManipSettingAtt
Retrieves environment informations for the DistanceStep parameter.
GetDistanceThreshold
method in object HybridShapeExtractMulti
Returns the DistanceThreshold of the list of constraints at specified position.
GetDistanceThresholdActivity
method in object HybridShapeExtractMulti
Returns the DistanceThresholdActivity of the list of constraints at specified position.
GetDlnameInfo
method in object InteropSettingAtt
Retrieves information about the "DlNAME" setting parameter.
GetDocLanguageInfo
method in object DocumentationSettingAtt
Retrieves environment informations for the technical documentation language parameter.
GetDocument
method in object StiDBItem
Returns the CATIA Document associated to the CATIAStiDBItem -the SmarTeam Integration Object.
GetDocumentContentAtCreationInfo
method in object FunctionalSystemSettingAtt
Retrieves environment informations for the DocumentContentAtCreation parameter.
GetDocumentFullPath
method in object StiDBItem
Returns the Full Path of the CATIA Document associated to the CATIAStiDBItem.
GetDoubleAttribute
method in object E5Property
GetDoubleUserAttribute
method in object Fastener
eturns the value of user attribute whoes name matches the input string.
GetDownloaderDirInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP Translator Directory setting parameter.
GetDownloaderInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP Translator setting parameter.
GetDraftAngleDefinitionLocation
method in object HybridShapeSweepLine
Retrieves the draft angle location element.
GetDraftAngleDefinitionLocationsNb
method in object HybridShapeSweepLine
Retrieves the draft angle location list size.
GetDraftFeatureMigrationModeInfo
method in object SpecV4SettingAtt
Retrieves information about the DraftFeatureMigrationMode setting parameter.
GetDragDropInfo
method in object GeneralSessionSettingAtt
Retrieves environment informations for the drag & drop parameter.
GetDrawInfo
method in object InteropSettingAtt
Retrieves information about the "Open in Light Mode: 2D Data are not taken into account" setting parameter.
GetDrawing
method in object SchematicRoot
Retrieves the drawing root in the schematic document.
GetDrawingStandard
method in object SchematicRoot
Get the drawing standard.
GetDriverConfigurationPath
method in object PrintersSettingAtt
Returns the driver configuration file.
GetDriverConfigurationPathInfo
method in object PrintersSettingAtt
Retrieves environment informations for the driver configuration file.
GetDuration
method in object Shot
Retrieves the duration (time) associated to a shot.
GetDynamicCullInfo
method in object VisualizationSettingAtt
Retrieves information about the DynamicCull setting parameter.
GetDynamicLODInfo
method in object VisualizationSettingAtt
Retrieves information about the DynamicLOD setting parameter.
GetEdgeToKeepSharp
method in object HybridShapeHealing
Returns the edge to be kept sharp from the list at specified position.
GetEdgeToTear
method in object HybridShapeUnfold
Retrieves an element used by the hybrid shape unfold feature object.
GetEditDedicatedFilterDialogBoxInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the EditDedicatedFilterDialogBox parameter.
GetElem
method in object HybridShapeTrim
Gets the trimmed feature at a given index.
GetElement
method in object HybridShapeAssemble
Retrieves an element used by the hybrid shape assemble feature object.
GetElement
method in object HybridShapePolyline
Returns the element of the polyline.
GetElement
method in object HybridShapeExtractMulti
Returns the sub element used as init for the propagation.
GetElement
method in object MfgActivities
This method return the specified CATIAManufacturingActivity in the current list CATIAMfgActivities.
GetElement
method in object MfgToolMotions
This method return the specified CATIAManufacturingToolMotion in the current list CATIAMfgToolMotions.
GetElementProperties
method in object ABQGlobalElementAssignment
Gets the behavior and the modifier to given element type.
GetElementToFreeze
method in object HybridShapeHealing
Returns the element to be freezed from the list at specified position.
GetElementsSize
method in object HybridShapeAssemble
Returns the size of the list of elements to assemble in the hybrid shape assemble feature object.
GetEnableAnlModeInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the EnableAnlMode parameter.
GetEnableHeartBeatInfo
method in object RobAnalysisHeartBeatUsageSettingAtt
Retrieves environment informations for the SingularColor parameter.
GetEndEffector
method in object SWKIKConstraint
Returns the end effector of the IK chain of the constraint.
GetEndPoint
method in object SchGRRRoute
Get the end point of the route graphic.
GetEndPoints
method in object Curve2D
Returns the end-points of the curve.
GetEndPoints
method in object SchBoundaryElem
Get the end points (segments end points) of one side of the boundary.
GetEndTangentDirectionFlag
method in object HybridShapeConic
Retrieves the tangent direction orientation at the conic end point.
GetEngineInterfaceInfo
method in object RenderingSettingAtt
Retrieves environment informations for the EngineInterface parameter.
GetEnumerateValues
method in object IntParam
Returns an array containing the different values that the int param can take in the case of multiple values.
GetEnumerateValues
method in object StrParam
Returns an array containing the different values that the real param can take in the case of multiple values.
GetEnumerateValues
method in object RealParam
Returns an array containing the different values that the real param can take in the case of multiple values.
GetEnumerateValuesSize
method in object IntParam
Returns the number of enumerate values.
GetEnumerateValuesSize
method in object StrParam
Returns the number of enumerate values.
GetEnumerateValuesSize
method in object RealParam
Returns the number of enumerate values.
GetErrorDescription
method in object OrderGenerator
Get Error Description.
GetEulerAngles
method in object AxisSystem
Returns the Euler Angles of an axis system.
GetExclusionRegions
method in object ABQRigidCoupling
Returns the exclusion regions for the coupling.
GetExclusionRegions
method in object ABQSmoothCoupling
Returns the exclusion regions for the coupling.
GetExistingTaskTreatmentInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP Existing Task Treatment On Upload setting parameter.
GetExpNotationValuesGreaterInfo
method in object UnitsSheetSettingAtt
Retrieves environment informations for the ExpNotationValuesGreater parameter.
GetExpNotationValuesLowerInfo
method in object UnitsSheetSettingAtt
Retrieves environment informations for the ExpNotationValuesLower parameter.
GetExpandSketchBasedFeaturesNodeAtCreationInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
GetExportBackgroundColor
method in object VrmlSettingAtt
Returns the ExportBackgroundColor parameter (Background color of exported Vrml files).
GetExportBackgroundColorInfo
method in object VrmlSettingAtt
Retrieves information about the ExportBackgroundColor setting parameter.
GetExportEdgesInfo
method in object VrmlSettingAtt
Retrieves information about the ExportEdges setting parameter.
GetExportMSBOInfo
method in object IgesSettingAtt
Retrieves information about the Export Solid Mode setting parameter.
GetExportNormalsInfo
method in object VrmlSettingAtt
Retrieves information about the ExportNormals setting parameter.
GetExportTextureFileInfo
method in object VrmlSettingAtt
Retrieves information about the ExportTextureFile setting parameter.
GetExportTextureFormatInfo
method in object VrmlSettingAtt
Retrieves information about the ExportTextureFormat setting parameter.
GetExportTextureInfo
method in object VrmlSettingAtt
Retrieves information about the ExportTexture setting parameter.
GetExportUnitInfo
method in object IgesSettingAtt
Retrieves information about the Export Units setting parameter.
GetExportVersionInfo
method in object VrmlSettingAtt
Retrieves information about the ExportVersion setting parameter.
GetExternalMaxDeformationInfo
method in object V4V5SpaceSettingAtt
Retrieves information about the ExternalMaxDeformation setting parameter.
GetExternalReferences
method in object MacrosSettingAtt
Returns the list of external references.
GetExternalReferencesAsVisibleInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ExternalReferencesAsVisible" parameter.
GetExternalReferencesAssemblyRootContextInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ExternalReferencesAssemblyRootContext" parameter.
GetExternalReferencesInfo
method in object MacrosSettingAtt
Retrieves environment informations for the external references setting.
GetExternalReferencesNodeInTreeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ExternalReferencesNodeInTree" parameter.
GetExternalTypeDeformationInfo
method in object V4V5SpaceSettingAtt
Retrieves environment informations for activation mode with external deformation (Gap Healing).
GetExtremities
method in object FunctActionsGroup
Get coordinates of Input and Output extremities.
GetExtremityCntrs
method in object SchRoute
Get extremity connectors of the route.
GetFT06Stream
method in object ManufacturingGeneratorData
Retrieves the FT06 stream.
GetFaceConnector
method in object PspPartConnector
Returns the face connector.
GetFaceHLDrillInfo
method in object VisualizationSettingAtt
Retrieves information about the FaceHLDrill setting parameter.
GetFaceToKeep
method in object HybridShapeFilletBiTangent
Gets the face to keep for fillet operation.
GetFacesForClosing
method in object HybridShapeLoft
Gets start and end faces if the tangent is a computed tangent surface to the start section or end section, from the lofted surface.
GetFacet
method in object FunctionalObject
Returns the Facet.
GetFacet
method in object FunctionalAction
Returns the Facet.
GetFacet
method in object FunctionalDescription
Returns the Facet.
GetFacetByName
method in object FunctionalObject
Returns the Facet.
GetFacetByName
method in object FunctionalAction
Returns the Facet.
GetFacetByName
method in object FunctionalDescription
Returns the Facet.
GetFakeDimValue
method in object DrawingDimValue
Get fake value of dimension.
GetFastener
method in object FastenerSet
Get a specified DELMIAFastener from the collection of Fasteners.
GetFasteners
method in object DNBFastenerItemServices
Gets all the Fasteners on the products.
GetFastenersFromProcess
method in object DNBFastenerItemServices
Gets all the DELMIAFasteners assigned to the Activity.
GetFastenersFromResource
method in object DNBFastenerItemServices
Gets all the DELMIAFasteners assigned to the Resource.
GetFeature
method in object ManufacturingOperation
Retrieve the Machinable Feature asociated to a Manufacturing Operation.
GetFederatedElement
method in object HybridShapeAssemble
Retrieves an federated inits used by the hybrid shape assemble feature object.
GetFederatedElementsSize
method in object HybridShapeAssemble
Gets the number of federated inits.
GetFederationPropagation
method in object HybridShapeAssemble
Gets the propagation mode of the federation.
GetFeedSpeedAutoUpdate
method in object ManufacturingOperation
Returns the Auto Update status for Feed Rate or Spindle Speed.
GetFeedrate
method in object ManufacturingToolMotion
Retrieves the Feedrate of a Manufacturing Point to point ToolMotion.
GetFile
method in object FileSystem
Returns a file using its full path.
GetFillPoint
method in object HybridShapeSweep
GetFinishSymbol
method in object DrawingWelding
Returns the finish symbol of the drawing welding.
GetFirstActInfo
method in object HtsCCPSettingAtt
Retrieves environment informations for the FirstAct parameter.
GetFirstAngleLaw
method in object HybridShapeSweepCircle
Retrieves the first angle law useful in some circular sweep types.
GetFirstAxis
method in object Plane
Returns the coordinates of the first plane axis.
GetFirstAxis
method in object PlanarFace
GetFirstDirection
method in object RectPattern
Returns the first repartition direction.
GetFirstLengthDefinitionType
method in object HybridShapeSweepLine
Retrieves the first length definition type.
GetFirstLengthLaw
method in object HybridShapeSweepLine
Retrieves the first length law useful in some linear sweep types.
GetFirstPointCoordinates
method in object Distance
Retrieves the coordinates of the point belonging to the first product, which realizes the distance.
GetFirstPointCoordinates
method in object Conflict
Retrieves the coordinates of the point on the first product which realizes the penetration or minimum distance.
GetFittingPoints
method in object HybridShapeSweepExplicit
Gets the fitting points : located in the profile plane, these points are used for two-guide swept surfaces to determine guide intersection locations.
GetFixTogether
method in object FixTogether
Returns a FixTogether using its index or its name in the FixTogether.
GetFlip
method in object DrawingComponent
Returns the flip state of a drawing component instance around X axis.
GetFlyByMode
method in object GenericAccuracyProfile
Gets On/Off status of Flyby mode.
GetFlyCollisionModeInfo
method in object VisualizationSettingAtt
Retrieves information about the FlyCollisionMode setting parameter.
GetFlyCollisionSphereRadiusInfo
method in object VisualizationSettingAtt
Retrieves information about the FlyCollisionSphereRadius setting parameter.
GetFlyCollisionTypeInfo
method in object VisualizationSettingAtt
Retrieves information about the FlyCollisionType setting parameter.
GetFlySensitivityInfo
method in object VisualizationSettingAtt
Retrieves information about the FlySensitivity setting parameter.
GetFlySpeedInfo
method in object VisualizationSettingAtt
Retrieves information about the FlySpeed setting parameter.
GetFlySpeedModeInfo
method in object VisualizationSettingAtt
Retrieves information about the FlySpeedMode setting parameter.
GetFolder
method in object FileSystem
Returns a folder using its full path.
GetFollowGroundAltitudeInfo
method in object VisualizationSettingAtt
Retrieves information about the FollowGroundAltitude setting parameter.
GetFollowGroundModeInfo
method in object VisualizationSettingAtt
Retrieves information about the FollowGroundMode setting parameter.
GetFontName
method in object DrawingText
Returns the font name on a substring of the drawing text.
GetFontSize
method in object DrawingText
Returns the font size on a substring of the drawing text.
GetForceClearanceVoxelInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the ForceClearanceVoxel parameter.
GetForceVoxelInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the ForceVoxel parameter.
GetFormatDisplayFactor
method in object DrawingDimValue
Get format display factor of dimension value.
GetFormatMode
method in object GeneralStatisticsSettingAtt
Returns the format mode of the statistics thematic.
GetFormatName
method in object DrawingDimValue
Get format name of dimension value.
GetFormatPrecision
method in object DrawingDimValue
Get format precision of dimension value.
GetFormatType
method in object DrawingDimValue
Get format type of dimension value.
GetFormatUnit
method in object DrawingDimValue
Get format unit of dimension value.
GetFreeCenter
method in object HybridShapeCircle
Returns the circle center.
GetFreeRadius
method in object HybridShapeCircle
Returns the circle radius.
GetFrequencyInfo
method in object LicenseSettingAtt
Retrieves information about the Frequency setting parameter.
GetFromTo
method in object PspLogicalLine
Retrieves the lists of major and minor from/to members from this line.
GetFromToInfoArrayMaxSize
method in object PspLogicalLine
Returns the maximum possible size of the from-to information.
GetFromToInformation
method in object PspLogicalLine
Retrieves the from/to information of a logical line.
GetFrozenCurveSegment
method in object HybridShapeCurveSmooth
Retrieves the Frozen Curve Segment at specified position in the hybrid shape curve smooth object.
GetFrozenCurveSegmentsSize
method in object HybridShapeCurveSmooth
Returns the number of frozen curve segments in the curve smooth object.
GetFrozenPoint
method in object HybridShapeCurveSmooth
Retrieves the Frozen Point at specified position in the hybrid shape curve smooth object.
GetFrozenPointsSize
method in object HybridShapeCurveSmooth
Returns the number of Frozen Points in the curve smooth object.
GetFullSceneAntiAliasingModeInfo
method in object VisualizationSettingAtt
Retrieves information about the AntiAliasingMode setting parameter.
GetFunctional
method in object PspPhysical
Returns the Function object.
GetFunctionalActionPresentationInfo
method in object FunctionalSystemSettingAtt
Retrieves environment informations for the FunctionalActionPresentation parameter.
GetFunnel
method in object DrawingDimExtLine
Get funnel infomation of dimension extension line.
GetGPSName
method in object DrawingViewGenerativeBehavior
Retrieves the set of generative parameters currently applied to the view.
GetGRRName
method in object SchGRR
Get current name of the GRR.
GetGRRRoute
method in object SchRouteSymbol
Get the graphical representation of a schematic route that owns this symbol.
GetGap
method in object DrawingDimExtLine
Get gap of dimension extension line.
GetGapConductionTable
method in object ABQThermalConnBehavior
Returns list(s) containing gap, conductance, and temperature values.
GetGeneralTolClassInfo
method in object FTASettingAtt
Retrieves informations about the Dimension general class tolerance setting parameter value.
GetGeomAssociatedToAnnotation
method in object WIText
Gets the underlying geometry associated to FTA Text Annotation which is added as an item to operation of one WIText Activity or added as item to a WIText activity.
GetGeomInfo
method in object DrawingDimLine
Get geometrical infomation of dimension line.
GetGeomInfo
method in object DrawingDimExtLine
Get geometrical infomation of dimension extension line.
GetGeomReferedByAnnotation
method in object WITextAccessEI
Gets the underlying geometry associated to FTA Text Annotation, an Engineering Intent which is added as an item to operation or to a WIText activity.
GetGeometricalFeatureType
method in object HybridShapeFactory
Returns type of "geometrical" shape Design feature .
GetGeometriesAquisitionMode
method in object ManufacturingPrismaticMachiningArea
Gets the aquisition mode of one geometry of a Manufacturing Prismatic Machining Area.
GetGeometryRepresentationFormatInfo
method in object Export3DXmlSettingAtt
Retrieves environment informations for the geometry representation format setting.
GetGotoPtPointCoordinates
method in object ManufacturingToolMotion
Retrieves coordinates on the ToolMotion.
GetGrabbedObjects
method in object GrabAct
GetGrabbedObjects
method in object ReleaseAct
GetGrantedLicensesList
method in object LicenseSettingAtt
GetGravityAxisInfo
method in object VisualizationSettingAtt
Retrieves information about the GravityAxis setting parameter.
GetGravityCenter
method in object FreeSpace
Returns the gravity center.
GetGravityCenter
method in object Analyze
Returns the gravity center coordinates of product.
GetGravityInfo
method in object VisualizationSettingAtt
Retrieves information about the Gravity setting parameter.
GetGridAutoFilteringInfo
method in object SectioningSettingAtt
Retrieves environment informations for the GridAutoFiltering parameter.
GetGridAutoResizeInfo
method in object SectioningSettingAtt
Retrieves environment informations for the GridAutoResize parameter.
GetGridDisplayInfo
method in object FTAInfraSettingAtt
Retrieves information about the Grid Display setting parameter value.
GetGridHeightStepInfo
method in object SectioningSettingAtt
Retrieves environment informations for the GridHeightStep parameter.
GetGridPositionModeInfo
method in object SectioningSettingAtt
Retrieves environment informations for the GridPositionMode parameter.
GetGridPrimarySpacingInfo
method in object FTAInfraSettingAtt
Retrieves information about the Grid Primary Spacing setting parameter value.
GetGridSecondaryStepInfo
method in object FTAInfraSettingAtt
Retrieves information about the Grid Secondary Step setting parameter value.
GetGridSnapPointInfo
method in object FTAInfraSettingAtt
Retrieves information about the Grid Snap Point setting parameter value.
GetGridStyleInfo
method in object SectioningSettingAtt
Retrieves environment informations for the GridStyle parameter.
GetGridVPrimarySpacingInfo
method in object FTAInfraSettingAtt
Retrieves information about the GridV Primary Spacing setting parameter value.
GetGridVSecondaryStepInfo
method in object FTAInfraSettingAtt
Retrieves information about the GridV Secondary Step setting parameter value.
GetGridWidthStepInfo
method in object SectioningSettingAtt
Retrieves environment informations for the GridWidthStep parameter.
GetGuide
method in object HybridShapeLoft
Gets informations about the guide at a specified position in the list of the lofted surface.
GetGuide
method in object HybridShapeSpine
Retrieves a guide .
GetHaloModeInfo
method in object VisualizationSettingAtt
Retrieves information about the HaloMode setting parameter.
GetHandler
method in object ABQRigidCoupling
Returns the handler for the coupling.
GetHandler
method in object ABQSmoothCoupling
Returns the handler for the coupling.
GetHandler
method in object ABQConcentratedForce
Returns the handler for the distributed load.
GetHandlesRGB
method in object VisualizationSettingAtt
Returns the HandlesRGB parameter.
GetHandlesRGBInfo
method in object VisualizationSettingAtt
Retrieves information about the HandlesRGB setting parameter.
GetHideIn3DInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the HideIn3D parameter.
GetHidePlaneInfo
method in object SectioningSettingAtt
Retrieves environment informations for the HidePlane parameter.
GetHideResultInfo
method in object SectioningSettingAtt
Retrieves environment informations for the HideResult parameter.
GetHighlightDefAnnotInfo
method in object FTASettingAtt
Retrieves informations about the Highlight Def Annot setting parameter value.
GetHomePositions
method in object BasicDevice
Get list of home positions of the device.
GetHybridDesignModeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "HybridDesignMode" parameter.
GetHyperLinks
method in object WIText
GetHyperlink
method in object Hyperlinks
GetID
method in object PspID
Gets ID for the object.
GetIDUniqueSetting
method in object LibTabSettingAtt
GetIDUniqueSettingInfo
method in object LibTabSettingAtt
Retrieves environment informations for the 'Unique Check' parameter.
GetIcon
method in object Material
Write the icon of a material to disc.
GetIdeasComponentNameInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the IdeasComponentName parameter.
GetIdeasComponentTypeInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the IdeasComponentType parameter.
GetIdeasLibraryNameInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the IdeasLibraryName parameter.
GetIdeasPartNumberInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the IdeasPartNumber parameter.
GetIdeasProjectNameInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the IdeasProjectName parameter.
GetIdeasRevNumberInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the IdeasRevNumber parameter.
GetIdeasTessParamInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the IdeasTessParam parameter.
GetIdentifier
method in object AnalysisGlobalSensor
Retreives the Physical type and sub physical type that will be computed by the sensor.
GetIdi3dAnnotationModeInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the Idi3dAnnotationMode parameter.
GetImageQualityModeInfo
method in object AnalysisReportingSettingAtt
Retrieves environment informations for the ImageQualityMode parameter.
GetImageTextSizeInfo
method in object AnalysisPostProSettingAtt
Retrieves environment informations for the ImageTextSize parameter.
GetImageTextStackingInfo
method in object AnalysisPostProSettingAtt
Retrieves environment informations for the ImageTextStacking parameter.
GetImpliedResourceFilterInfo
method in object VerifTabSettingAtt
Retrieves environment informations for the "View Implied Resource" parameter.
GetImportAnnotationInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportAnnotation parameter.
GetImportBaseFrmInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportBaseFrm parameter.
GetImportCollisionInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportCollision parameter.
GetImportConfigFileExpanded
method in object ImportD5SettingAtt
Returns the ImportConfigFile parameter (manages expanded file pathnames).
GetImportConfigFileInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportConfigFile parameter.
GetImportCoorsysInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportCoorsys parameter.
GetImportCreaseAngleInfo
method in object VrmlSettingAtt
Retrieves information about the ImportCreaseAngle setting parameter.
GetImportEdgeInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportEdge parameter.
GetImportFloorInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportFloor parameter.
GetImportGroupAsSelSetInfo
method in object IgesSettingAtt
Retrieves information about the Import Selection Set mode setting parameter.
GetImportLibraryExpanded
method in object ImportD5SettingAtt
Returns the ImportLibrary parameter (manages expanded file pathnames).
GetImportLibraryInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportLibrary parameter.
GetImportPDBCacheExpanded
method in object ImportD5SettingAtt
Returns the ImportPDBCache parameter (manages expanded file pathnames).
GetImportPDBCacheInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportPDBCache parameter.
GetImportRecordingInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportRecording parameter.
GetImportToolFrmInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportToolFrm parameter.
GetImportUnitInfo
method in object VrmlSettingAtt
Retrieves information about the ImportUnit setting parameter.
GetImportUserAttrInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportUserAttr parameter.
GetImportUserViewsInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportUserViews parameter.
GetImportWclMessageInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportWclMessage parameter.
GetImportWclPathInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the ImportWclPath parameter.
GetInParameter
method in object Relation
Returns an input parameter of the relation.
GetInactivityDurationInfo
method in object DisconnectionSettingAtt
Retrieves environment informations for inactivity duration.
GetInertia
method in object GenericToolProfile
Get the underlying coefficient of the tool inertia.
GetInertia
method in object Analyze
Returns the inertia matrix array of product.
GetInertiaMatrix
method in object Inertia
Retrieves the matrix of inertia.
GetInitial_Model_File_PathInfo
method in object V4WritingSettingAtt
Retrieves information about the Initial_Model_File_Path setting parameter.
GetInput
method in object ShapeInstance
Gets an input of a shape instance by its name.
GetInput
method in object Behavior
Returns the value of one available input of the behavior.
GetInput
method in object HybridShapeInstance
Gets an input of a hybrid shape instance by its name.
GetInputData
method in object ShapeInstance
Gets an input of a shape instance by its name.
GetInputData
method in object HybridShapeInstance
Gets an input of a shape instance by its name.
GetInputDataFromPosition
method in object ShapeInstance
Gets an input of a hybrid shape instance from its position.
GetInputDataFromPosition
method in object HybridShapeInstance
Gets an input of a hybrid shape instance from its position.
GetInputFromPosition
method in object ShapeInstance
Gets an input of a hybrid shape instance from its position.
GetInputFromPosition
method in object HybridShapeInstance
Gets an input of a hybrid shape instance from its position.
GetInsertLevelInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the InsertLevel parameter.
GetInsertModeInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the InsertMode parameter.
GetInsertionType
method in object SchInternalFlow
Get insertion flow type.
GetIntUserAttribute
method in object Fastener
GetInterface
method in object PspWorkbench
Returns specific interface handle on a given object.
GetInterface
method in object SchematicRoot
Returns specific interface handle on a given object.
GetIntermedTangent
method in object HybridShapeConic
Retrieves the tangent direction at one of the conic intermediate passing points.
GetIntermediatePoint
method in object HybridShapeConic
Retrieves one of the conic intermediate passing points.
GetIntermediateTangentDirectionFlag
method in object HybridShapeConic
Retrieves the tangent direction orientation of one of the conic intermediate points.
GetInternal
method in object BehaviorVBScript
Returns one available io of the behavior.
GetInternalEdgesElement
method in object HybridShapeExtrapol
Gets an element in the list of internal elements (vertex or edges).
GetInternalMaxDeformationInfo
method in object V4V5SpaceSettingAtt
Retrieves information about the InternalMaxDeformation setting parameter.
GetInternalTypeDeformationInfo
method in object V4V5SpaceSettingAtt
Retrieves environment informations for activation mode with internal deformation (Curve Improvement).
GetInterrupt
method in object DrawingDimExtLine
Get the number of interruptions stored in each extension lines.
GetInterruptions
method in object DrawingArrow
Get arrow path.
GetInterruptions
method in object DrawingLeader
Get leader path.
GetIntersection
method in object HybridShapeSplit
Gets the intersection at a given index.
GetIsFederated
method in object HybridShapeExtractMulti
Returns the IsFederated flag checked/unchecked of the list of constraints at specified position.
GetIsoparGenerationModeInfo
method in object VisualizationSettingAtt
Retrieves information about the IsoparGenerationMode setting parameter.
GetIssueRepositoryPathInfo
method in object MfgHubSettingAtt
Retrieves the state of the IssueRepositoryPath parameter.
GetItem
method in object AnyObject
Returns an object from its name.
GetItem
method in object Collection
Returns an object from its name.
GetItems
method in object FastenerGroup
Returns the entities in the fastener group of the type which is input.
GetItemsFilterInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the 'Items Folder' parameter.
GetItemsPerRelationFilterInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the 'Items Folder(Per Relation Type)' parameter.
GetJavaClassPathInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP Java Class Path setting parameter.
GetJavaClassPathInfo
method in object FASReportingSettingAtt
Gets information on "Java Class Path" parameter.
GetJavaExeInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP Java Executable setting parameter.
GetJavaExeInfo
method in object FASReportingSettingAtt
Gets information on "Java Executable" parameter.
GetJoinedPartNames
method in object FastenerGroup
Returns the list of part names joined by fastener.
GetJointRelationExpression
method in object DeviceJointRelations
Get Kin expression of the given Joint.
GetJointTarget
method in object RobotMotion
Retrieves the Robot Joint target.
GetJointValues
method in object MoveToPostureActivity
Gets the Manikin's Position and Posture values in 137 doubles.
GetKeepSegmentationInfo
method in object V4V5SpaceSettingAtt
Retrieves information about the KeepSegmentation setting parameter.
GetKeptElem
method in object HybridShapeTrim
Gets the kept feature at a given index.
GetKeptElem
method in object HybridShapeSplit
Gets the kept feature at a given index.
GetKeyboardRotationAngleValueInfo
method in object VisualizationSettingAtt
Retrieves information about the KeyboardRotationAngleValue setting parameter.
GetKnowledgeBuildPathDirectoryInfo
method in object LanguageSheetSettingAtt
Retrieves information about the CATKnowledgeBuildPath setting parameter.
GetKnowledgeInHybridDesignModeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "KnowledgeInHybridDesignMode" parameter.
GetKnownInterpolaters
method in object Sampled
Returns or sets the Sampled object.
GetLODModeInfo
method in object CacheSettingAtt
Retrieves environment informations for the LOD generation mode.
GetLabelCode
method in object SchFrameInfo
Get the frame label code.
GetLabelColor
method in object MeasureSettingAtt
Returns the LabelColor parameter.
GetLabelColorInfo
method in object MeasureSettingAtt
Retrieves environment informations for the LabelColor parameter.
GetLanguageEditor
method in object MacrosSettingAtt
Returns the editor path for the specified language.
GetLanguageEditorInfo
method in object MacrosSettingAtt
Retrieves environment informations for the language editors setting.
GetLastActInfo
method in object HtsCCPSettingAtt
Retrieves environment informations for the LastAct parameter.
GetLastObjectToGenerate
method in object ManufacturingGeneratorData
Retrieves the last object to generate.
GetLastSendToMethodError
method in object SendToService
Retreives the diagnosis related to the last call to SendToService interface.
GetLayer
method in object VisPropertySet
Returns the layer for the current selection.
GetLayer_for_No_AssoInfo
method in object V4WritingSettingAtt
Retrieves information about the Layer_for_No_Asso setting parameter.
GetLayersNumber
method in object BasicComponent
Return one of the dimensions information of the Basic Component structure.
GetLayoutDefaultRenderStyleInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the default render style parameter.
GetLeaderAssociativityInfo
method in object FTAInfraSettingAtt
Retrieves information about the Leader Associativity setting parameter value.
GetLegendsVisibility
method in object TCPTrace
Get the TCP trace component (DNBTCPTraceReps) legend visibility status.
GetLength
method in object HybridShapeSweepLine
Returns the length values useful in some linear sweep types.
GetLength
method in object StrComputeServices
Returns the length to cut for a member object.
GetLengthAtParam
method in object Curve2D
Returns the length, measured along the curve, from a given parameter to a given parameter.
GetLengthInMetre
method in object AutoWalkActivity
GetLengthLawTypes
method in object HybridShapeSweepLine
Gets length law types.
GetLengthMaxToleranceInfo
method in object ToleranceSheetSettingAtt
Retrieves environment informations for the LengthMaxTolerance parameter.
GetLengthMinToleranceInfo
method in object ToleranceSheetSettingAtt
Retrieves environment informations for the LengthMinTolerance parameter.
GetLengthType
method in object HybridShapeLinePtPt
Gets the length type Default is 0.
GetLengthType
method in object HybridShapeLinePtDir
Gets the length type Default is 0.
GetLengthType
method in object HybridShapeLineAngle
Gets the length type Default is 0.
GetLengthType
method in object HybridShapeLineNormal
Gets the length type Default is 0.
GetLengthType
method in object HybridShapeLineTangency
Gets the length type Default is 0.
GetLengthType
method in object HybridShapeLineBiTangent
Gets the length type Default is 0.
GetLengthType
method in object HybridShapeLineBisecting
Gets the length type Default is 0.
GetLicense
method in object LicenseSettingAtt
Retrieves the value of the license.
GetLicense
method in object DynLicenseSettingAtt
The method is not relevant for the settings.
GetLicenseInfo
method in object LicenseSettingAtt
Retrieves information about the License setting parameter.
GetLicenseInfo
method in object DynLicenseSettingAtt
Retrieves the state of a given License.
GetLicensesList
method in object LicenseSettingAtt
Retrieves the list of the requested or locked licenses.
GetLicensesList
method in object DynLicenseSettingAtt
Retrieves the List of the Licenses.
GetLicensesListInfo
method in object LicenseSettingAtt
Retrieves information about the LicensesList setting parameter.
GetLicensesListInfo
method in object DynLicenseSettingAtt
Retrieves information about the LicensesList setting locking state (global lock for the LicensesList).
GetLightViewerModeInfo
method in object VisualizationSettingAtt
Retrieves information about the LightViewerMode setting parameter.
GetLimitation
method in object HybridShapeCircle
Gets the limitation type for the circle.
GetLinAccelColorInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the LinAccelColor parameter.
GetLinAccelLimitInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the LinAccelLimit parameter.
GetLinSpeedColorInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the LinSpeedColor parameter.
GetLinSpeedLimitInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the LinSpeedLimit parameter.
GetLineColor
method in object TCPTraceActivity
Indicates the line Color property of trace.
GetLineThickness
method in object TCPTraceActivity
Indicates the line thickness property of trace.
GetLineType
method in object TCPTraceActivity
Indicates the line type property of trace.
GetLineWidthInfo
method in object MeasureSettingAtt
Retrieves environment informations for the LineWidth parameter.
GetLinearStiffness
method in object ABQSpringConnectionProperty
Gets the linear stiffness of the spring given the degree of freedom.
GetLineicCgrModeInfo
method in object VisualizationSettingAtt
Retrieves information about the LineicCgrMode setting parameter.
GetLinesNumber
method in object BasicComponent
Return one of the dimensions information of the Basic Component structure.
GetLink
method in object SchCntrDocLink
Get the linked connector and its document name.
GetLinkModeInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the LinkMode parameter.
GetLinkSendModeInfo
method in object MfgHubSettingAtt
Retrieves the state of the LinkSendMode parameter.
GetLinkedDeviceFile
method in object D5Device
Get the Linked D5 Device File.
GetLinkedExternalReferencesInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "LinkedExternalReferences" parameter.
GetLinkedExternalReferencesOnlyOnPublicationInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "LinkedExternalReferencesOnlyOnPublication" parameter.
GetLinkedExternalReferencesWarningAtCreationInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "LinkedExternalReferencesWarningAtCreation" parameter.
GetListOfAptParameters
method in object ManufacturingTool
Retrieve the list of apt definition parameters of a Manufacturing Tool.
GetListOfAttributeUnits
method in object ManufacturingTool
Retrieve the list of attribute units of a Manufacturing Tool.
GetListOfAttributeUnits
method in object ManufacturingInsert
Retrieve the list of attribute units of an insert object.
GetListOfAttributeUnits
method in object ManufacturingMachine
Retrieve the list of attribute units of a ManufacturingMachine.
GetListOfAttributeUnits
method in object ManufacturingToolAssembly
Retrieves the list of attribute units of a tool assembly.
GetListOfAttributes
method in object ManufacturingTool
Retrieve the list of attributes of a Manufacturing Tool.
GetListOfAttributes
method in object ManufacturingInsert
Retrieve the list of attributes of an insert object.
GetListOfAttributes
method in object ManufacturingMachine
Retrieve the list of all attributes of a ManufacturingMachine.
GetListOfAttributes
method in object ManufacturingToolAssembly
Retrieves the list of attributes of a tool assembly.
GetListOfConstraints
method in object HybridShapeExtractMulti
Returns the list of Extracted Elements.
GetListOfDependantFile
method in object SendToService
Retreives the complete list of the files recursively pointed by the file given in argument to SetInitialFile method.
GetListOfFeedrateAttributes
method in object ManufacturingActivity
Retrieve the list of Feedrate attributes of a Manufacturing Activity.
GetListOfGeomAttributes
method in object ManufacturingTool
Retrieve the list of geometry attributes of a Manufacturing Tool.
GetListOfGeomAttributes
method in object ManufacturingActivity
Retrieve the list of Geometry attributes of a Manufacturing Activity.
GetListOfLibraryFilePath
method in object LibTabSettingAtt
GetListOfLibraryFilePathInfo
method in object LibTabSettingAtt
GetListOfMagnitudesInfo
method in object UnitsSheetSettingAtt
Retrieves information about the ListOfMagnitudes setting parameter.
GetListOfNumericalControlAttributes
method in object ManufacturingMachine
Retrieve the list of Numerical Control attributes of a Manufacturing Machine.
GetListOfPackagesToLoadInfo
method in object LanguageSheetSettingAtt
Retrieves information about the ListOfPackagesToLoad setting parameter.
GetListOfRotaryTableAttributes
method in object ManufacturingMachine
Retrieve the list of Rotary table attributes of a Manufacturing Machine.
GetListOfSelectionSet
method in object SelectionSets
Retrieves the list of Selection Sets in the document.
GetListOfSpindleAttributes
method in object ManufacturingMachine
Retrieve the list of Spindle attributes of a Manufacturing Machine.
GetListOfStrategyAttributes
method in object ManufacturingActivity
Retrieve the list of Strategy attributes of a Manufacturing Activity.
GetListOfToBeCopiedFiles
method in object SendToService
Retreives the complete list of the files that will be copied.
GetListOfToolChangeAttributes
method in object ManufacturingMachine
Retrieve the list of Tool Change attributes of a Manufacturing Machine.
GetListOfToolMotions
method in object ManufacturingOperation
Give a list of Manufacturing ToolMotion contained by a sequential operation.
GetListofAttachments
method in object AttachmentCont
GetLoad3dStateAndPosInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the Load3dStateAndPos parameter.
GetLoadAllChildProcMfgCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadAllChildProcMfgCtx parameter.
GetLoadAllPackagesInfo
method in object LanguageSheetSettingAtt
Retrieves information about the LoadAllPackages setting parameter.
GetLoadAssocPrdResChildInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadAssocPrdResChild parameter.
GetLoadChildProcMfgCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadChildProcMfgCtx parameter.
GetLoadCtxWithFileGeometryInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadCtxWithFileGeometry parameter.
GetLoadDispMfgCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadDispMfgCtx parameter.
GetLoadENVGeomFromENVdbInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadENVGeomFromENVdb parameter.
GetLoadExtendedLanguageLibInfo
method in object LanguageSheetSettingAtt
Retrieves information about the LoadExtendedLanguageLib setting parameter.
GetLoadFeedProcMfgCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadFeedProcMfgCtx parameter.
GetLoadMfgAssmblyInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadMfgAssmbly parameter.
GetLoadMfgKitsInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadMfgKits parameter.
GetLoadPSSDataInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadPSSData parameter.
GetLoadParameters
method in object MHISaveAccess
GetLoadPrdResUserAttribsInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadPrdResUserAttribs parameter.
GetLoadResGeoInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadResGeo parameter.
GetLoadUnconstrainedMfgCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LoadUnconstrainedMfgCtx parameter.
GetLocalCsysFromPublication
method in object ABQGravity
Gets the published local coordinate system of the gravity load.
GetLocalCsysFromPublication
method in object ABQRigidCoupling
Gets the published local coordinate system of for the coupling.
GetLocalCsysFromPublication
method in object ABQDisplacementBC
Gets the published local coordinate system of the Displacement BC.
GetLocalCsysFromPublication
method in object ABQSmoothCoupling
Gets the published local coordinate system of for the coupling.
GetLocalCsysFromPublication
method in object ABQConcentratedForce
Gets the published local coordinate system of the concentrated force.
GetLocalID
method in object PspID
Retrieves local ID of the object.
GetLocalPathInfo
method in object CacheSettingAtt
Retrieves environment informations for the Cache local path.
GetLocalToolAxis
method in object ManufacturingPattern
Retrieve the local tool axis of a point of a Manufacturing Pattern.
GetLocation
method in object PertNode
GetLockAssignedPrdOnLoadInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the LockAssignedPrdOnLoad parameter.
GetLockUserDefaultInfo
method in object DraftingSettingAtt
Retrieves environment informations for the LockUserDefault parameter.
GetLogicalActFilterInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the "Logical Activities" parameter.
GetLogicalDataAttrListInfo
method in object PlugMapViewSettingAtt
Retrieves environment informations for the LogicalDataAttrList parameter.
GetLogicalLine
method in object PspAppFactory
Returns a PspLogicalLine Logical line Instance.
GetLongAttribute
method in object E5Property
GetLongitudinalRelimiters
method in object HybridShapeSweepLine
GetLongitudinalRelimiters
method in object HybridShapeSweepConic
GetLongitudinalRelimiters
method in object HybridShapeSweepCircle
GetLongitudinalRelimiters
method in object HybridShapeSweepExplicit
GetMTPActColorInfo
method in object HtsTaskDisplaySettingAtt
Retrieves environment informations for the MTPActColor parameter.
GetMTPActSymbolInfo
method in object HtsTaskDisplaySettingAtt
Retrieves environment informations for the MTPActSymbol parameter.
GetMachiningAxisSystemName
method in object ManufacturingSetup
Retrieves the Name of the Machining Axis system from a Manufacturing Setup.
GetMachiningDirection
method in object ManufacturingActivity
Retreives the Machining Direction coordinates of a Manufacturing Operation.
GetMagnitudeValues
method in object UnitsSheetSettingAtt
Returns the Magnitude parameters.
GetMailClientLaunchModeInfo
method in object MfgHubSettingAtt
Retrieves the state of the MailClientLaunchMode parameter.
GetMajorAxis
method in object Ellipse2D
GetManRefSizInfo
method in object FTAInfraSettingAtt
Retrieves information about the Manipulator Reference Size setting parameter value.
GetManZooCapInfo
method in object FTAInfraSettingAtt
Retrieves information about the Manipulator Zoom Capability setting parameter value.
GetManifold
method in object HybridShapeAssemble
Get the manifold checker flag.
GetManipAutoInsertInfo
method in object ManipSettingAtt
Retrieves environment informations for the ManipAutoInsert parameter.
GetManufacturingFeature
method in object ManufacturingOperation
Retrieve the Manufacturing Feature asociated to a Manufacturing Operation.
GetManufacturingView
method in object ManufacturingSetup
Retrieves the Manufacturing View from a Manufacturing Setup.
GetMapping_File_Save_ModeInfo
method in object MigrBatchSettingAtt
Retrieves information about the "Mapping Files Location for Saving" setting parameter.
GetMapping_Saving_FileInfo
method in object MigrBatchSettingAtt
Retrieves information about the "Specified Directory" setting parameter.
GetMarker2DAutoNamingInfo
method in object MarkerSettingAtt
Retrieves environment informations for the Marker2DAutoNaming parameter.
GetMarker2DAutoNamingInfo
method in object N4DNavigatorSettingAtt
GetMarker3DAutoNamingInfo
method in object MarkerSettingAtt
Retrieves environment informations for the Marker3DAutoNaming parameter.
GetMarker3DAutoNamingInfo
method in object N4DNavigatorSettingAtt
GetMarkerAutoUpdateInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the MarkerAutoUpdate parameter.
GetMarkerDefaultsColor
method in object MarkerSettingAtt
Returns the default color of an annotation (oRed, oGreen, oBlue: RGB values of the color).
GetMarkerDefaultsColor
method in object N4DNavigatorSettingAtt
GetMarkerDefaultsColorInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerDefaultsColor parameter.
GetMarkerDefaultsColorInfo
method in object N4DNavigatorSettingAtt
GetMarkerDefaultsDashedInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerDefaultsDashed parameter.
GetMarkerDefaultsDashedInfo
method in object N4DNavigatorSettingAtt
GetMarkerDefaultsFontInfo
method in object N4DNavigatorSettingAtt
GetMarkerDefaultsSizeInfo
method in object N4DNavigatorSettingAtt
GetMarkerDefaultsWeightInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerDefaultsWeight parameter.
GetMarkerDefaultsWeightInfo
method in object N4DNavigatorSettingAtt
GetMarkerTextColor
method in object N4DNavigatorSettingAtt
GetMarkerTextColor2D
method in object MarkerSettingAtt
Returns the default color of a 2D text annotation (oRed, oGreen, oBlue: RGB values of the color).
GetMarkerTextColor2DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerTextColor2D parameter.
GetMarkerTextColor3D
method in object MarkerSettingAtt
Returns the default color of a 3D text annotation (oRed, oGreen, oBlue: RGB values of the color).
GetMarkerTextColor3DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerTextColor3D parameter.
GetMarkerTextColorInfo
method in object N4DNavigatorSettingAtt
GetMarkerTextDashed2DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerTextDashed2D parameter.
GetMarkerTextDashed3DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerTextDashed3D parameter.
GetMarkerTextDashedInfo
method in object N4DNavigatorSettingAtt
GetMarkerTextDefaultsFont2DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerDefaultsFont2D parameter.
GetMarkerTextDefaultsFont3DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerDefaultsFont3D parameter.
GetMarkerTextDefaultsSize2DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerDefaultsSize2D parameter.
GetMarkerTextDefaultsSize3DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerDefaultsSize3D parameter.
GetMarkerTextWeight2DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerTextWeight2D parameter.
GetMarkerTextWeight3DInfo
method in object MarkerSettingAtt
Retrieves environment informations for the MarkerTextWeight3D parameter.
GetMarkerTextWeightInfo
method in object N4DNavigatorSettingAtt
GetMass
method in object GenericToolProfile
Retrieves the mass of the tool.
GetMass
method in object StrComputeServices
Returns the mass for a structure object.
GetMasterShapeRepresentation
method in object Scene
Retrieves the product's master shape representation.
GetMasterShapeRepresentation
method in object Product
Retrieves the product's master shape representation.
GetMasterShapeRepresentationPathName
method in object Product
Retrieves the product's master shape representation pathname.
GetMaterialName
method in object StrComputeServices
Returns the material name for a structure object.
GetMaterialOnBody
method in object MaterialManager
Get a Material on a Body.
GetMaterialOnHybridBody
method in object MaterialManager
Get a Material on a Hybrid Body.
GetMaterialOnPart
method in object MaterialManager
Get a Material on a Part.
GetMaterialOnProduct
method in object MaterialManager
Get a Material on a Product.
GetMaterialOnUserMaterial
method in object MaterialManager
Get a Material on a User Material (Analysis entity).
GetMatrix
method in object DrawingComponent
Gets the matrix of the drawing component instance.
GetMatrixAll
method in object Track
GetMatrixAll Gets the base location of the track.
GetMaxAngleInfo
method in object FittingSettingAtt
Retrieves environment information for the MaxAngle parameter.
GetMaxCalculationTime
method in object SetOfEquation
Returns the maximum time of the model calculations.
GetMaxDisplayedResultsInfo
method in object SearchSettingAtt
Retrieves information about the Max Displayed Results setting parameter.
GetMaxPreHighlightedElementsInfo
method in object SearchSettingAtt
Retrieves information about the Max Displayed Results setting parameter.
GetMaxSelectionMoveInfo
method in object VisualizationSettingAtt
Retrieves information about the MaxSelectionMove setting parameter.
GetMeasurable
method in object SPAWorkbench
Returns the Measurable object.
GetMeasureInfo
method in object Export3DXmlSettingAtt
GetMeasureUnitSymbol
method in object HybridShapeLawDistProj
Returns the measure unit symbol.
GetMemberColor
method in object ColorESSObjectSettingAtt
Returns or sets the MemberColor parameter.
GetMemberColorInfo
method in object ColorESSObjectSettingAtt
Retrieves environment informations for the MemberColor parameter.
GetMemberMaterialInfo
method in object MaterialESSObjectSettingAtt
Retrieves environment informations for the MemberMaterial parameter.
GetMemberTypesInfo
method in object TypeESSObjectSettingAtt
Retrieves environment informations for the MemberTypes parameter.
GetMemoryStopperStateInfo
method in object MemoryWarningSettingAtt
Retrieves environment informations for the memory stopper mechanism.
GetMergeInfos
method in object DrawingTable
Returns informations about a group of merge cells from a cell.
GetMfgAparamTopPln
method in object ManufacturingOperation
Retrieve the Equation of the Top Plane of a Pocket Operation.
GetMfgAxialFeatureDiameter
method in object ManufacturingOperation
Retrieve the diameter of an axial manufacturing feature.
GetMfgBparamTopPln
method in object ManufacturingOperation
Retrieve the Equation of the Top Plane of a Pocket Operation.
GetMfgCparamTopPln
method in object ManufacturingOperation
Retrieve the Equation of the Top Plane of a Pocket Operation.
GetMfgCtxPrevProcRelationTypeInfo
method in object MfgHubSettingAtt
Retrieves environment information for the MfgCtxPrevProcRelationType parameter Role :Retrieves the state of the MfgCtxPrevProcRelationType parameter in the current environment.
GetMfgDparamTopPln
method in object ManufacturingOperation
Retrieve the Equation of the Top Plane of a Pocket Operation.
GetMfgFeaturePosition
method in object ManufacturingOperation
Retrieve the Coordinate of the Reference Point of a Drill Operation.
GetMfgFeatureXPosition
method in object ManufacturingOperation
Retrieve the Coordinate of the Reference Point of a Drill Operation.
GetMfgFeatureYPosition
method in object ManufacturingOperation
Retrieve the Coordinate of the Reference Point of a Drill Operation.
GetMfgFeatureZPosition
method in object ManufacturingOperation
Retrieve the Coordinate of the Reference Point of a Drill Operation.
GetMfgTopPlane
method in object ManufacturingOperation
Retrieve the Equation of the Top Plane of a Pocket Operation.
GetMigration_FormatInfo
method in object MigrBatchSettingAtt
Retrieves information about the "Format" setting parameter.
GetMigration_InterfaceInfo
method in object MigrBatchSettingAtt
Retrieves information about the "Migration Interface" setting parameter.
GetMigration_TypeInfo
method in object MigrBatchSettingAtt
Retrieves information about the "Conversion" setting parameter.
GetMinimumDistance
method in object Measurable
Compute the minimum distance between the CATIAMeasurable and another.
GetMinimumDistancePoints
method in object Measurable
Compute the points corresponding to the minimum distance between the two references.
GetMinimumFPSModeInfo
method in object VisualizationSettingAtt
Retrieves information about the MinimumFPSMode setting parameter.
GetMinimumSpaceFPSModeInfo
method in object VisualizationSettingAtt
Retrieves information about the MinimumSpaceFPSMode setting parameter.
GetMinorAxis
method in object Ellipse2D
GetModeCreateDisplayInfo
method in object V4WritingSettingAtt
Retrieves information about the ModeCreateDisplay setting parameter.
GetModeErrorDisplayInfo
method in object V4WritingSettingAtt
Retrieves information about the ModeErrorDisplay setting parameter.
GetModeImageTextSizeInfo
method in object AnalysisPostProSettingAtt
Retrieves environment informations for the ModeImageTextSize parameter.
GetModel_DimensionInfo
method in object V4WritingSettingAtt
Retrieves information about the Model_Dimension setting parameter.
GetModel_FactorInfo
method in object V4WritingSettingAtt
Retrieves information about the Model_Factor setting parameter.
GetModel_File_NameInfo
method in object V4WritingSettingAtt
Retrieves information about the Model_File_Name setting parameter.
GetModel_UnitInfo
method in object V4WritingSettingAtt
Retrieves information about the Model_Unit setting parameter.
GetModifiableIn2DComponentInstances
method in object DrawingText
Returns if the text is modifiable or not in 2D component instances.
GetModifiableObject
method in object DrawingComponent
Gets a modifiable object by index or name in this drawing component instance.
GetModifiableObjectsCount
method in object DrawingComponent
Gets the number of modifiable objects in this drawing component instance.
GetMotionBasis
method in object GenericMotionProfile
Retrieves motion basis of the Profile.
GetMotionProfile
method in object RobotMotion
Retrieves Motion profile.
GetMotionProfile
method in object RobGenericController
Get Motion profile given name.
GetMotionProfileCount
method in object RobGenericController
Get number of Motion profiles in controller.
GetMotionProfiles
method in object RobGenericController
Get Motion profiles list in controller.
GetMotionType
method in object RobotMotion
Retrieves the type of Motion.
GetMountedDevices
method in object MountManager
GetMouseDoubleClicDelayInfo
method in object VisualizationSettingAtt
Retrieves information about the MouseDoubleClicDelay setting parameter.
GetMouseSpeedValueInfo
method in object VisualizationSettingAtt
Retrieves information about the MouseSpeedValue setting parameter.
GetMove
method in object Scene
Returns the product's move object.
GetMoveAfterCreationInfo
method in object FTAInfraSettingAtt
Retrieves information about the Move After Creation setting parameter value.
GetMoveWithFixTExtendModeInfo
method in object AsmGeneralSettingAtt
Retrieves the state of the setting parameter managing the extension of a move to the components involved in a FixTogether.
GetMultiStringAttributeValues
method in object PspAttribute
Retrieves String values for the input attribute the type catPspIDLMultiString.
GetNCOutputFile
method in object ManufacturingProgram
Get the output file (APT or ISO) associated to the program (if associated during computation).
GetNRLDirInfo
method in object IgpOlpSettingAtt
Retrieves information about the NRL configuration file directory setting parameter.
GetNRLTeachDialogDisplayModeInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLPNRLTeachDialogDisplay setting parameter.
GetName
method in object Tag
Retreives name of the Tag.
GetName
method in object ParameterProfiles
GetName
method in object GenericToolProfile
Gets name of the Tool Profile.
GetName
method in object GenericMotionProfile
Gets name of the Motion Profile.
GetName
method in object RobGenericController
Retreives name of the generic controller.
GetName
method in object SchAppCntrName
Get the application connector name.
GetName
method in object GenericObjFrameProfile
Gets name of the Object frame Profile.
GetName
method in object GenericAccuracyProfile
Gets name of the Accuracy Profile.
GetName
method in object Task
GetNameOfFilmCoeffAmplitude
method in object ABQFilmCondition
Returns the name of the amplitude that contains the variation of the the film coefficient with time.
GetNameOfSinkAmplitude
method in object ABQFilmCondition
Returns the name of the amplitude that contains the variation of the sink temperature with time.
GetNameToUseInRelation
method in object Parameters
Returns a correct name of a feature to use it in a relation.
GetNamingModeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "NamingMode" parameter.
GetNbAngle
method in object HybridShapeSweepLine
Retrieves the number of angles.
GetNbAngle
method in object HybridShapeSweepCircle
Retrieves the number of angles.
GetNbAngle
method in object HybridShapeSweepExplicit
Returns the number of Angles.
GetNbConstraints
method in object HybridShapeExtractMulti
Returns number of constraints in the list of Extracted Elements.
GetNbControlPoint
method in object HybridShapeSpline
Returns the number of control points.
GetNbCuttingElem
method in object HybridShapeSplit
Gets the number of cutting features.
GetNbElem
method in object HybridShapeTrim
Gets the number of elements: couple(element, index of portion to keep on element).
GetNbElementsToKeep
method in object HybridShapeTrim
Gets the number of elements to keep.
GetNbElementsToKeep
method in object HybridShapeSplit
Gets the number of elements to keep.
GetNbElementsToRemove
method in object HybridShapeTrim
Gets the number of elements to remove.
GetNbElementsToRemove
method in object HybridShapeSplit
Gets the number of elements to remove.
GetNbGuide
method in object HybridShapeSweepCircle
Retrieves the number of guide curves.
GetNbGuide
method in object HybridShapeSweepExplicit
Gets the number of guides curves.
GetNbGuideCrv
method in object HybridShapeSweepLine
Retrieves the number of guides curves.
GetNbGuideSur
method in object HybridShapeSweepLine
Retrieves the number of guide surfaces.
GetNbGuides
method in object HybridShapeSweepConic
Gets the number of guides.
GetNbIsoparsInfo
method in object VisualizationSettingAtt
Retrieves information about the NbIsopars setting parameter.
GetNbLength
method in object HybridShapeSweepLine
Retrieves the number of lengths.
GetNbOfGuides
method in object HybridShapeLoft
Returns the number of guides in the loft object.
GetNbPath
method in object TCPTraceManager
Get the number of TCP trace.
GetNbPosAngle
method in object HybridShapeSweepExplicit
Gets the number of numerical positioning parameters corresponding to angles from the default positions of the X axes.
GetNbPosAngle
method in object HybridShapePositionTransfo
Gets the number of numerical positioning parameters : first axis direction angles.
GetNbPosCoord
method in object HybridShapeSweepExplicit
Gets the number of numerical positioning parameters corresponding to coordinates of the new axes systems origins.
GetNbPosCoord
method in object HybridShapePositionTransfo
Gets the number of numerical positioning parameters : origin planar coordinates.
GetNbProductMotion
method in object Replay
Get the number of channel related to products.
GetNbRadius
method in object HybridShapeSweepCircle
Retrieves the number of radii.
GetNbSample
method in object Replay
Get the number of samples for a channel number.
GetNbrURL
method in object Noa
Gets the number of URL.
GetNbrURL
method in object FlagNote
Gets the number of URL.
GetNewPrinterDirectory
method in object PrintersSettingAtt
Returns the directory where new printers will be added.
GetNewPrinterDirectoryInfo
method in object PrintersSettingAtt
Retrieves environment informations for the directory where printers will be added.
GetNewWith3DSupportInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "NewWith3DSupport" parameter.
GetNewWithAxisSystemInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "NewWithAxisSystem" parameter.
GetNewWithGSInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "NewWithGS" parameter.
GetNewWithOGSInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "NewWithOGS" parameter.
GetNewWithPanelInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "NewWithPanel" parameter.
GetNextOrientation
method in object HybridShapeTrim
Gets Orientation used to compute the feature, referring to the next trimmed element.
GetNoShowBackgroundRGB
method in object VisualizationSettingAtt
Retrieves the No Show Background Color setting attribute value.
GetNoShowBackgroundRGBInfo
method in object VisualizationSettingAtt
Retrieves the No Show Background Color setting attribute information.
GetNoZBufferSelectionModeInfo
method in object VisualizationSettingAtt
Retrieves information about the NoZBufferSelectionMode setting parameter.
GetNoaCreationInfo
method in object FTASettingAtt
Retrieves informations about the Noa Creation setting parameter value.
GetNodelockAlertInfo
method in object LicenseSettingAtt
Retrieves information about the license expiry alert setting parameter.
GetNomenclature
method in object Scene
Returns the product's nomenclature.
GetNomenclature
method in object ArrNomenclatureTree
Finds a UserNomenclature by Name from this UserDictionary.
GetNominalBaseOffset
method in object CalibOffsets
Retrieve nominal base offset for the robot base wrt robot base reference position.
GetNominalToolOffset
method in object CalibOffsets
Retrieve nominal tool offset for the robot wrt robot mount position.
GetNonLinearStiffness
method in object ABQSpringConnectionProperty
Gets the non-linear stiffness of the spring in the form of array, given the degree of freedom.
GetNonSemanticAllwaysUpgradeGeneralTolInfo
method in object FTASettingAtt
Retrieves informations about the Non Semantic Allways Upgrade general tolerance setting parameter value.
GetNonSemanticAllwaysUpgradeInfo
method in object FTASettingAtt
Retrieves informations about the Non Semantic Allways Upgrade setting parameter value.
GetNonSemanticDimAllowedInfo
method in object FTASettingAtt
Retrieves informations about the Non Semantic Dim Allowed setting parameter value.
GetNonSemanticMarkedInfo
method in object FTASettingAtt
Retrieves informations about the Non Semantic Marked setting parameter value.
GetNonSemanticTolAllowedInfo
method in object FTASettingAtt
Retrieves informations about the Non Semantic Tol Allowed setting parameter value.
GetNumOfSegments
method in object ArrBendableString
Returns the cumulative number of the straight/arc segments that make up the Bendable object.
GetNumOfSegmentsLocalAxis
method in object ArrBendableString
Returns the cumulative number of the straight/arc segments that make up the Bendable object.
GetNumTags
method in object AMPPath
Function to get the number of AMPTags in the given AMPPath.
GetNumUrlNameInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the NumUrlName parameter.
GetNumberOfConstraints
method in object MoveToPostureActivity
GetNumberOfControlPoints
method in object Spline2D
GetNumberOfCurveFasteners
method in object FastenerWorkBench
GetNumberOfCurves
method in object HybridShapeWrapCurve
Returns the number of couples of curves of the WrapCurve.
GetNumberOfFastenerGroups
method in object FastenerWorkBench
GetNumberOfFasteners
method in object DNBFastenerItemServices
Gets the number of Fasteners on the products.
GetNumberOfGuides
method in object HybridShapeSpine
Retrieves number of guides in a spine curve.
GetNumberOfMfgAssemblies
method in object MfgAssemblyFactory
GetNumberOfMinimumFPSInfo
method in object VisualizationSettingAtt
Retrieves information about the NumberOfMinimumFPS setting parameter.
GetNumberOfMinimumSpaceFPSInfo
method in object VisualizationSettingAtt
Retrieves information about the NumberOfMinimumSpaceFPS setting parameter.
GetNumberOfPointFasteners
method in object FastenerWorkBench
GetNumberOfRootsOfFacts
method in object ExpertRuleBaseRuntime
Retrieves the number of roots of facts of the rule base.
GetNumberOfSections
method in object HybridShapeSpine
Retrieves number of sections in a spine curve.
GetNumberOfShapes
method in object Product
GetNumberOfStates
method in object DNB3DState
GetNumberOfStates
method in object DNB3DStateMgmt
GetNumbers
method in object ManufacturingPattern
Retrieve the number of the points of a Manufacturing Pattern.
GetObjFrameProfile
method in object RobGenericController
Get ObjFrame profile given name.
GetObjFrameProfileCount
method in object RobGenericController
Get number of ObjFrame profiles in controller.
GetObjFrameProfiles
method in object RobGenericController
Get ObjFrame profiles list in controller.
GetObject
method in object Resource
This method returns the IDL Interface for the specified interface identifier.
GetObjectFrame
method in object GenericObjFrameProfile
Retrieve the underlying x,y,z, roll, pitch, yaw of the Object Frame.
GetObjectPositions
method in object Marker3D
Retrieves the coordinates of the anchor point of the marker on the object.
GetObjectProfile
method in object RobotMotion
Retrieves Object profile.
GetOcclusionCullingModeInfo
method in object VisualizationSettingAtt
Retrieves information about the OcclusionCullingMode setting parameter.
GetOffset
method in object PlaceActivity
GetOnlyCurrentOperatedSolidSetInGeometryInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
GetOnlyCurrentSolidSetInGeometryInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "OnlyCurrentSolidSetInGeometry" parameter.
GetOnlyLoadCtxWithGeometryInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the OnlyLoadCtxWithGeometry parameter.
GetOnlyShowInfo
method in object IgesSettingAtt
Retrieves information about the Export only show setting parameter.
GetOpType
method in object AMPTag
Function to get the operation type of the given AMPTag.
GetOpaqueFacesInfo
method in object VisualizationSettingAtt
Retrieves information about the SetStereoModeLock setting parameter.
GetOpenModeForLoadInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the OpenModeForLoad parameter.
GetOptC2ModeInfo
method in object IgesSettingAtt
Retrieves information about the Continuity Optimization Mode setting parameter.
GetOptCleanTopoModeInfo
method in object IgesSettingAtt
Retrieves information about the Clean Topo Mode setting parameter.
GetOptFittingModeInfo
method in object IgesSettingAtt
Retrieves information about the Fitting Mode setting parameter.
GetOptInvalidGeomModeInfo
method in object IgesSettingAtt
Retrieves information about the InvalidGeom mode setting parameter.
GetOptLoop3DModeInfo
method in object IgesSettingAtt
Retrieves information about the Force 3D Loop setting parameter.
GetOrder
method in object NavigatorWorkbench
Returns the order of an object.
GetOrientation
method in object HybridShapeBlend
Returns the orientation of a curve of the blend.
GetOrientation
method in object HybridShapeSplit
Gets Orientation used to compute the split.
GetOrientationConnector
method in object PspPartConnector
Get Orientation connector.
GetOrientationInfo
method in object TreeVizManipSettingAtt
Retrieves environment informations for the orientation applied to the specification tree.
GetOrientationMode
method in object RobotMotion
Retrieves the TCP Orientation Mode.
GetOrientationVector
method in object PspLightConnector
Returns the Orientation Direction of the connector.
GetOrigin
method in object Line
Role : Returns the origin of the line.
GetOrigin
method in object Plane
Returns the origin of the plane.
GetOrigin
method in object Hole
Returns the origin point which the hole is anchored to.
GetOrigin
method in object Viewpoint2D
Gets the coordinates of the origin of the viewpoint.
GetOrigin
method in object Viewpoint3D
Retrieves the coordinates of the origin of the viewpoint.
GetOrigin
method in object PlanarFace
Returns the origin of the planar face.
GetOrigin
method in object Line2D
GetOrigin
method in object AxisSystem
Returns the coordinates X,Y,Z of the origin point of the axis system.
GetOrigin
method in object RenderingLight
Returns the coordinates of the origin of the light.
GetOrigin
method in object CylindricalFace
Returns the origin of the cylindrical face axis.
GetOrigin
method in object AnnotatedView
Retrieves the coordinates of the origin of the 3D viewpoint of the annotated view.
GetOrigin
method in object AssemblyHole
Retrieves the origin point to which the hole is anchored.
GetOrigin
method in object RenderingEnvironment
Returns the coordinates of the origin of the environment.
GetOrigin
method in object PspLightConnector
Returns the position of the connector.
GetOrigin
method in object RectilinearBiDimFeatEdge
Returns the origin of the the rectilinear edge.
GetOrigin
method in object ManufacturingHole
Returns the origin point which the hole is anchored to.
GetOrigin
method in object RectilinearTriDimFeatEdge
Returns the origin of the the rectilinear edge.
GetOrigin
method in object RectilinearMonoDimFeatEdge
Returns the origin of the the rectilinear edge.
GetOrigin
method in object ManufacturingMachinableGeometry
Retrieves the origin of a pointed geometry under a ManufacturingMachinableGeometry object.
GetOriginCornerCode
method in object SchFrameInfo
Get the frame origin corner code.
GetOriginPoint
method in object ManufacturingMachiningAxis
Gets the Origin of a Manufacturing Machining Axis System used as Origin.
GetOriginXDirection
method in object ManufacturingMachiningAxis
Gets the Origin X direction of a Manufacturing Machining Axis System used as Origin.
GetOriginYDirection
method in object ManufacturingMachiningAxis
Gets the Origin Y direction of a Manufacturing Machining Axis System used as Origin.
GetOriginZDirection
method in object ManufacturingMachiningAxis
Gets the Origin Z direction of a Manufacturing Machining Axis System used as Origin.
GetOriginalHeight
method in object DrawingPicture
Gets the original height of the drawing picture.
GetOriginalWidth
method in object DrawingPicture
Gets the original width of the drawing picture.
GetOtherSelectionTimeoutActivityInfo
method in object VisualizationSettingAtt
Retrieves information about the OtherSelectionTimeoutActivity setting parameter.
GetOtherSelectionTimeoutInfo
method in object VisualizationSettingAtt
Retrieves information about the OtherSelectionTimeout setting parameter.
GetOtherSide
method in object HybridShapeSplit
Gets the other side.
GetOutParameter
method in object Relation
Returns an output parameter of the relation.
GetOutput
method in object ShapeInstance
Gets a Ouput by its name.
GetOutput
method in object Behavior
Returns the value of one available output of the behavior.
GetOutput
method in object HybridShapeInstance
Gets a Ouput by its name.
GetOutputFromPosition
method in object ShapeInstance
Gets a Ouput from its position.
GetOutputFromPosition
method in object HybridShapeInstance
Gets a Ouput from its position.
GetOutputHeightInfo
method in object RenderingSettingAtt
Retrieves environment informations for the OutputHeight parameter.
GetOutputPathInfo
method in object RenderingSettingAtt
Retrieves environment informations for the OutputPath parameter.
GetOutputPathInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the OutputPath parameter.
GetOutputProductFilterInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the "Output Products Folder" parameter.
GetOutputSizeFromInfo
method in object RenderingSettingAtt
Retrieves environment informations for the OutputSizeFrom parameter.
GetOutputStream
method in object ManufacturingGeneratorData
Retrieves the output stream.
GetOutputTypeInfo
method in object RenderingSettingAtt
Retrieves environment informations for the OutputType parameter.
GetOutputWidthInfo
method in object RenderingSettingAtt
Retrieves environment informations for the OutputWidth parameter.
GetOverrun
method in object DrawingDimExtLine
Get overrun of dimension extension line.
GetOwner
method in object TagGroup
Retrieves the name of the owner of this TagGroup.
GetPPRSaveConfigInfo
method in object Export3DXmlSettingAtt
Retrieves environment informations for the PPRSaveConfig setting.
GetPPWord
method in object ManufacturingToolMotion
Retrieves the content of a Manufacturing PP Word ToolMotion.
GetPROJECT_File_PathInfo
method in object InteropSettingAtt
Retrieves information about the "PROJECT File Path" setting parameter.
GetPSCycleTimeInfo
method in object SimulationSettingAtt
Retrieves environment informations for the PSCycleTime parameter.
GetPSDynClashModeInfo
method in object SimulationSettingAtt
Retrieves environment informations for the PSDynClashMode parameter.
GetPSGraphicSimStepInfo
method in object SimulationSettingAtt
Retrieves environment informations for the PSGraphicSimStep parameter.
GetPSGraphicUpdateInfo
method in object SimulationSettingAtt
Retrieves environment informations for the PSGraphicUpdate parameter.
GetPSText
method in object DrawingDimValue
Get PS text to dimension value.
GetPVEndConditionInfo
method in object SimulationSettingAtt
Retrieves environment informations for the PVEndCondition parameter.
GetPVStateMgtInfo
method in object SimulationSettingAtt
Retrieves environment informations for the PVStateMgt parameter.
GetPackAndGoRepositoryPathInfo
method in object MfgHubSettingAtt
Retrieves the state of the PackAndGoRepositoryPath parameter.
GetPaperHeight
method in object DrawingSheet
Gets the paper width of the drawing sheet.
GetPaperWidth
method in object DrawingSheet
Gets the paper width of the drawing sheet.
GetParamAtLength
method in object Curve2D
Returns the parameter at a given length, measured along the curve, starting from a given parameter.
GetParamExtents
method in object Curve2D
Returns the parametric extents of the curve.
GetParameter
method in object ShapeInstance
Gets a parameter of a shape instance by its name.
GetParameter
method in object InstanceFactory
Retrieves a parameter of the reference by its name.
GetParameter
method in object HybridShapeInstance
Gets a parameter of a hybrid shape instance by its name.
GetParameter
method in object PspAttribute
Retrieve parameter for the input attribute name.
GetParameterFromPosition
method in object ShapeInstance
Gets a parameter of a hybrid shape instance from its position.
GetParameterFromPosition
method in object HybridShapeInstance
Gets a parameter of a hybrid shape instance from its position.
GetParameterLaw
method in object HybridShapeSweepConic
Gets the parameter law used in conic sweep operation.
GetParameterNameSurroundedByTheSymbolInfo
method in object KnowledgeSheetSettingAtt
Retrieves environment informations for the ParameterNameSurroundedByTheSymbol parameter.
GetParameterOnSubString
method in object DrawingText
Returns a property on a substring of the drawing text.
GetParameterTreeViewWithFormulaInfo
method in object KnowledgeSheetSettingAtt
Retrieves environment informations for the ParameterTreeViewWithFormula parameter.
GetParameterTreeViewWithValueInfo
method in object KnowledgeSheetSettingAtt
Retrieves environment informations for the ParameterTreeViewWithValue parameter.
GetParametersInTreeInfo
method in object FTASettingAtt
Retrieves informations about the Parameters in tree setting parameter value.
GetParametersList
method in object WIBuyOff
GetParametersList
method in object WIDataCollection
GetParametersList
method in object WIChangeNotification
GetParametersNodeInTreeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ParametersNodeInTree" parameter.
GetParent
method in object DNBAttachment
Get the Parent Product of the Attachment.
GetParentMA
method in object DNBAttachment
Get the Parent Manufacturing Assembly of the Attachment.
GetPart
method in object Fastener
Returns the product at the specified index from list of parts joined by fastener.
GetPart
method in object FastenerGroup
Returns the product at the specified index from the list of parts joined by fastener group.
GetPartName
method in object ManufacturingSetup
Retrieves the Name of the Design Part from a Manufacturing Setup.
GetPartNumber
method in object Scene
Returns the product's part number.
GetPartProdModeInfo
method in object IgesSettingAtt
Retrieves information about the Import Product mode setting parameter.
GetPartRelation
method in object MoveToPostureActivity
DEPRECATED.
GetPartUpdateStatusInfo
method in object MeasureSettingAtt
Retrieves environment informations for the PartUpdateStatus parameter.
GetParts
method in object Fastener
Returns the list of parts joined by fastener.
GetPartsParameterModeInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the PartsParameterMode parameter.
GetPasteComponentModeInfo
method in object AsmConstraintSettingAtt
Retrieves informations about the component paste setting parameter.
GetPasteSameInstanceInfo
method in object TreeTabSettingAtt
Retrieves environment information for the 'Paste Same Instance' parameter.
GetPath
method in object TCPTraceManager
Get the iIndex path(trace)(starting at 1).
GetPath
method in object SchRoute
Get the defining points of a route.
GetPath
method in object SchGRRRoute
Get the defining points of a route graphic.
GetPathFinderSmoothInfo
method in object FittingSettingAtt
Retrieves environment information for the PathFinderSmooth parameter.
GetPattern
method in object ManufacturingOperation
Retrieve the Machining Pattern asociated to a Manufacturing Operation.
GetPick
method in object VisPropertySet
Returns the state pick mode for the current selection.
GetPickedProducts
method in object PickActivity
GetPickingWindowSizeInfo
method in object VisualizationSettingAtt
Retrieves information about the PickingWindowSize setting parameter.
GetPinAttribute
method in object ElecSchematicObject
Get the value of an attribute of the pin which connects this and the specified object.
GetPinSupports
method in object ABQRigidBodyConstraint
Gets the pin point supports for the rigid body.
GetPlacedProducts
method in object PlaceActivity
GetPlacementAxis
method in object SchCompGroupExt
Get the placement axis for the component group.
GetPlane
method in object Measurable
Retrieves informations of the plane.
GetPlaneAxisAngle
method in object HybridShapeDevelop
Retrieves the rotation angle.
GetPlaneAxisCoord
method in object HybridShapeDevelop
Retrieves the translation coordinates.
GetPlaneAxisSwapAxes
method in object HybridShapeDevelop
Retrieves the inversion axes from their previous definitions.
GetPlaneColor
method in object SectioningSettingAtt
Returns the PlaneColor parameter.
GetPlaneColorInfo
method in object SectioningSettingAtt
Retrieves environment informations for the PlaneColor parameter.
GetPlaneNormal
method in object HybridShapeCurvePar
Returns the Normal of the plane created when the Support of the curve is not specified.
GetPlaneNormal
method in object HybridShapeLawDistProj
Retrieves the support plane normal.
GetPlaneNormalInfo
method in object SectioningSettingAtt
Retrieves environment informations for the PlaneNormal parameter.
GetPlaneOriginInfo
method in object SectioningSettingAtt
Retrieves environment informations for the PlaneOrigin parameter.
GetPlateColor
method in object ColorSTDObjectSettingAtt
Returns or sets the PlateColor parameter.
GetPlateColor
method in object ColorESSObjectSettingAtt
Returns or sets the PlateColor parameter.
GetPlateColorInfo
method in object ColorSTDObjectSettingAtt
Retrieves environment informations for the PlateColor parameter.
GetPlateColorInfo
method in object ColorESSObjectSettingAtt
Retrieves environment informations for the PlateColor parameter.
GetPlateMaterialInfo
method in object MaterialESSObjectSettingAtt
Retrieves environment informations for the PlateMaterial parameter.
GetPlateTypesInfo
method in object TypeESSObjectSettingAtt
Retrieves environment informations for the PlateTypes parameter.
GetPoint
method in object HybridShapeSpline
Returns the Point at the given position.
GetPoint
method in object DrawingArrow
Get arrow point coordinates.
GetPoint
method in object DrawingLeader
Get leader point coordinates.
GetPoint
method in object HybridShapePlaneMean
Retrieves the point at a given position.
GetPoint
method in object Measurable
Retrieves the position of the point.
GetPoint
method in object ArrangementNode
Returns the location of the current ArrangementNode.
GetPointAndParam
method in object HybridShapeIntegratedLaw
Gets the point on spine and associated parameter at a given position.
GetPointAtParam
method in object Curve2D
Returns a point on the curve computed from an input parameter.
GetPointConstraintExplicit
method in object HybridShapeSpline
Returns the Constraint of the point at iPos.
GetPointConstraintFromCurve
method in object HybridShapeSpline
Returns the Constraint of the point at iPos.
GetPointPosition
method in object HybridShapeSpline
Returns the position of a given point.
GetPoints
method in object DrawingArrow
Get arrow path.
GetPoints
method in object DrawingLeader
Get leader path.
GetPointsOnAxis
method in object Measurable
Retrieves the the characteristic points of the axis with respect of the size of the revolution object.
GetPointsOnCurve
method in object Measurable
Retrieves the the characteristic points of the curve : the start point, the middle point and the end point.
GetPortionToKeep
method in object HybridShapeTrim
Gets a portion to keep number, giving the index of the element.
GetPos
method in object HybridShapePlaneMean
Gets the position of an element in the list.
GetPosAngle
method in object HybridShapeSweepExplicit
Gets angles if both profile and first sweep plane axis systems from default positions.
GetPosAngle
method in object HybridShapePositionTransfo
Returns angles of both initial and target coordinate systems from default positions.
GetPosCoord
method in object HybridShapeSweepExplicit
Gets translations coordinates if both profile axis system and first sweep plane axis system from default positions.
GetPosCoord
method in object HybridShapePositionTransfo
Returns translation coordinates if both initial and target coordinate systems from default positions.
GetPosDirection
method in object HybridShapeSweepExplicit
Gets the positioning directions : profile plane or first sweep plane X-axis direction.
GetPosPoint
method in object HybridShapeSweepExplicit
Gets the points designated as the origins of the profile plane and first sweep plane.
GetPosPoint
method in object HybridShapePositionTransfo
Returns the points designated as the origins of the initial and target planes.
GetPosSwapAxes
method in object HybridShapeSweepExplicit
Gets axes inversion from previous definition for both profile plane and first sweep plane.
GetPosSwapAxes
method in object HybridShapePositionTransfo
Returns axis inversion from previous definitions for both initial and target planes.
GetPosition
method in object Scene
Returns the product's position object in the scene.
GetPosition
method in object Plane
Gets the position where the plane is displayed.
GetPosition
method in object AMPTag
Function to get the position( array of doubles; X, Y, Z, Yaw, Roll, Pitch values ) of the given AMPTag.
GetPosition
method in object Section
Retrieves the position of the section.
GetPosition
method in object SchGRRComp
Get the current position of the component.
GetPosition
method in object PspPartConnector
Returns the Position of the connector.
GetPosition
method in object SchRouteSymbol
Get the symbol's position on the route that own it.
GetPosition
method in object SchCntrLocation
Get the current position of the connector in absolute coordinates.
GetPosition
method in object MoveToPostureActivity
GetPositionDirection
method in object HybridShapePositionTransfo
Returns the positioning directions.
GetPositions
method in object Marker2D
Retrieves the coordinates of the positions of the Marker2D.
GetPostureValues
method in object MoveToPostureActivity
Gets the Manikin's Posture values in 131 doubles.
GetPreSelectionModeInfo
method in object VisualizationSettingAtt
Retrieves information about the PreSelectionMode setting parameter.
GetPrecision
method in object SetOfEquation
Returns the calculation precision.
GetPreselectedElementLinetypeInfo
method in object VisualizationSettingAtt
Retrieves information about the PreselectedElementLinetype setting parameter.
GetPreselectedElementRGB
method in object VisualizationSettingAtt
Returns the PreselectedElementRGB parameter.
GetPreselectedElementRGBInfo
method in object VisualizationSettingAtt
Retrieves information about the PreselectedElementRGB setting parameter.
GetPresentationInfo
method in object Export3DXmlSettingAtt
GetPressureOverclosureTable
method in object ABQMechConnBehavior
Returns a list of tabular pressure overclosure in connection behavior.
GetPrevAreaInfo
method in object DMUTolSettingAtt
Retrieves informations about the Preview Area setting parameter value.
GetPrevProcParseTypeForMfgCtxInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the PrevProcParseTypeForMfgCtx parameter.
GetPreventBackgroundAccessInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventBackgroundAccess parameter.
GetPreventDimDriving3DCstrInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventDimDriving3DCstr parameter.
GetPreventFileNewInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventFileNew parameter.
GetPreventGenViewStyleInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventGenViewStyle parameter.
GetPreventSetAsDefaultInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventSetAsDefault parameter.
GetPreventSwitchStandardInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventSwitchStandard parameter.
GetPreventTrueDimensionCreationInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventTrueDimensionCreation parameter.
GetPreventUpdateStandardInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventUpdateStandard parameter.
GetPreventViewGeomUpgradeInfo
method in object DraftingSettingAtt
Retrieves environment informations for the PreventViewGeomUpgrade parameter.
GetPreviousOrientation
method in object HybridShapeTrim
Gets Orientation used to compute the feature, referring to the previous trimmed element.
GetPrincipalAxes
method in object Inertia
Retrieves the the principal axes of inertia.
GetPrincipalMoments
method in object Inertia
Retrieves the principal moments of inertia.
GetPrinterArrayForGroup
method in object PrintersSettingAtt
Returns the definition of the printer group.
GetPrinterDirectories
method in object PrintersSettingAtt
Returns the directories of printer files.
GetPrinterDirectoriesInfo
method in object PrintersSettingAtt
Retrieves environment informations for the directories of printer files and their states.
GetPrinterDirectoryState
method in object PrintersSettingAtt
Returns the state of the directory of printer files.
GetPrinterGroups
method in object PrintersSettingAtt
Returns the printer groups.
GetPrinterGroupsInfo
method in object PrintersSettingAtt
Retrieves environment informations for the definition of each printer group.
GetPriorityInfo
method in object DocumentationSettingAtt
Retrieves environment informations for the contextual priority parameter.
GetProEInstanceModeInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the ProEInstanceMode parameter.
GetProEInstanceNameInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the ProEInstanceName parameter.
GetProEQuiltsReadInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the ProEQuiltsRead parameter.
GetProESimpRepModeInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the ProESimpRepMode parameter.
GetProESimpRepNameInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the ProESimpRepName parameter.
GetProcProdRelationsInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the ProcProdRelations parameter.
GetProcResRelationsInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the ProcResRelations parameter.
GetProcess
method in object Fastener
GetProcessIDScript
method in object LibTabSettingAtt
GetProcessIDScriptInfo
method in object LibTabSettingAtt
GetProcessTreeID
method in object MHILoadParameters
GetProduct
method in object FixTogether
Returns a Product using its index or its name in the FixTogether.
GetProduct
method in object Replay
Get the product for a channel.
GetProduct
method in object Mechanism
Returns an item from the list of the products involved in the mechanism.
GetProductBOMID
method in object MHILoadParameters
GetProductInstance
method in object ManufacturingSetup
Give the Product of the ProductList linked to a Manufacturing Setup.
GetProductMotion
method in object Mechanism
Retrieves motion from initial state to current state for a part of the mechanism.
GetProductNames
method in object SystemConfiguration
Returns the product names of all the licenses currently known to the system.
GetProductUpdateStatusInfo
method in object MeasureSettingAtt
Retrieves environment informations for the ProductUpdateStatus parameter.
GetProfileInstance
method in object ParameterProfilesFactory
GetProfileInstances
method in object ParameterProfilesFactory
GetProjectionPlane
method in object DrawingViewGenerativeBehavior
Returns the drawing view projection plane.
GetProjectionPlaneNormal
method in object DrawingViewGenerativeBehavior
Returns the normal vector of the drawing view projection plane.
GetPropagateHighlightInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the PropagateHighlight parameter.
GetPropagationType
method in object HybridShapeExtractMulti
Returns the type of propagation of the list of constraints at specified position.
GetProperty
method in object StrSection
Get a property value.
GetProtectedElementsColor
method in object Layout2DSettingAtt
Returns the ProtectedElementsColor parameter.
GetProtectedElementsColorInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the ProtectedElementsColor parameter.
GetPublishAutoLaunchBrowserInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the PublishAutoLaunchBrowser parameter.
GetPublishTopologicalElementsInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "PublishTopologicalElements" parameter.
GetPullingDirection
method in object DraftDomain
Returns the draft pulling direction.
GetQuickConstraintModeInfo
method in object AsmConstraintSettingAtt
Retrieves informations about the quick constraint setting parameter.
GetQuickConstraintOrderedList
method in object AsmConstraintSettingAtt
Returns the quick constraint ordered list setting parameter.
GetRCSDataLibDirInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RCSDATA$LIB" parameter.
GetRRS2ConnectDownloadersInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2ConnectDownloaders" parameter.
GetRRS2ConsistencyCmdDownloadersInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2ConsistencyCmdDownloaders" parameter.
GetRRS2ControllerIdentifierAttributes
method in object RRSSettingAtt
Gets various controller identifier-specific attributes associated with a given controller identifier.
GetRRS2ControllerIdentifiersInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2ControllerIdentifiers" parameter.
GetRRS2DeleteAutoDownloadFilesAfterXferInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2DeleteAutoDownloadFilesAfterXfer" parameter.
GetRRS2DfltControllerIdentifierInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2DfltControllerIdentifier" parameter.
GetRRS2DownloadDuringConnectInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2DownloadDuringConnect" parameter.
GetRRS2DownloadDuringSimRunInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2DownloadDuringSimRun" parameter.
GetRRS2DownloadInPartCoordinatesInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2DownloadInPartCoordinates" parameter.
GetRRS2DownloadLogFileNameInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2DownloadLogFileName" parameter.
GetRRS2FreePlaySimStepSizeInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2FreePlaySimStepSize" parameter.
GetRRS2MainTaskProcessingInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2MainTaskProcessing" parameter.
GetRRS2MotionPlannerActiveDuringTeachOLPInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2MotionPlannerActiveDuringTeachOLP" parameter.
GetRRS2SimRunDownloadersInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2SimRunDownloaders" parameter.
GetRRS2StopVRCWhenSimStopsInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2StopVRCWhenSimStops" parameter.
GetRRS2UpdateProgramOnDownloadInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2UpdateProgramOnDownload" parameter.
GetRRS2UseVRCInverseKinematicsInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2UseVRCInverseKinematics" parameter.
GetRRS2UseVRCTurnLimitsInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS2UseVRCTurnLimits" parameter.
GetRRSLibDirInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS$LIB" parameter.
GetRRSServerFileInfo
method in object RRSSettingAtt
Retrieves environment informations for the "RRS Servers File" parameter.
GetRadius
method in object HybridShapeSweepCircle
Returns the radius value useful in some circular sweep types.
GetRadiusOnMacro
method in object ManufacturingOperation
Retrieves radius attribute on the circular elementary macro motion on CIRCULAR MILLING or THREAD MILLING operations ONLY.
GetRangeBox
method in object Curve2D
Returns the range box (or bounding box) of the object The box is axially aligned within the local coordinate system of the server.
GetRatingInfo
method in object HtsJointSpeedSettingsAtt
Retrieves environment informations for the Rating parameter.
GetReachColorInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the ReachColor parameter.
GetRealColor
method in object VisPropertySet
Retrieves the real color for the current selection.
GetRealColor
method in object SceneProductData
Returns / Set the scene product's color and inheritance.
GetRealInheritance
method in object VisPropertySet
Retrieves the real inheritance flag for the current selection.
GetRealLineType
method in object VisPropertySet
Retrieves the real line type for the current selection.
GetRealOpacity
method in object VisPropertySet
Retrieves the real opacity for the current selection.
GetRealWidth
method in object VisPropertySet
Retrieves the real line width for the current selection.
GetRecordModeInfo
method in object ManipSettingAtt
Retrieves environment informations for the RecordMode parameter.
GetRefComponents
method in object SchematicRoot
Returns a list of schematic component references under the root.
GetRefDocInfo
method in object GeneralSessionSettingAtt
Retrieves environment informations for the referenced documents parameter.
GetReference
method in object AnalysisEntity
Returns the reference corresponding to the given component.
GetReference
method in object AnalysisLocalEntity
Returns the reference corresponding to the given component.
GetReferenceBasePosition
method in object CalibOffsets
Retrieve current reference base position of robot.
GetReferenceDirection
method in object HybridShapeWrapCurve
Gets the reference direction projection of the wrap curve feature.
GetReferenceDirectoryForTypesInfo
method in object LanguageSheetSettingAtt
Retrieves information about the ReferenceDirectoryForTypes setting parameter.
GetReferencePoint
method in object HybridShapePlaneEquation
Gets the reference point.
GetReferenceSpine
method in object HybridShapeWrapCurve
Returns the reference spine of the wrap curve feature.
GetRelatedColors
method in object DMUTolSettingAtt
Retrieves the Related Surface Color setting parameter value.
GetRelatedColorsInfo
method in object DMUTolSettingAtt
Retrieves informations about the Related Surface Color setting parameter value.
GetRelatedOperation
method in object DNB3DState
GetRelatedResource
method in object DNB3DState
GetRelationObject
method in object MHIRelationManagement
GetRelationsNodeInTreeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "RelationsNodeInTree" parameter.
GetRelationsUpdateInPartContextEvaluateDuringUpdateInfo
method in object KnowledgeSheetSettingAtt
Retrieves environment informations for the RelationsUpdateInPartContextEvaluateDuringUpdate parameter.
GetRelationsUpdateInPartContextSynchronousRelationsInfo
method in object KnowledgeSheetSettingAtt
Retrieves environment informations for the RelationsUpdateInPartContextSynchronousRelations parameter.
GetRelativePosition
method in object SchCntrLocation
Get the current position of the connector in relative coordinates.
GetReleasePath
method in object CacheSettingAtt
Retieves the cache release paths.
GetReleasePathInfo
method in object CacheSettingAtt
Retrieves environment informations for the Cache release path.
GetReleasedVoxelInfo
method in object CacheSettingAtt
Retrieves environment informations for the Cache released voxel.
GetRelimiters
method in object HybridShapeSweepLine
Retrieves the elements relimiting the spine (or the default spine).
GetRelimiters
method in object HybridShapeSweepConic
Retrieves the elements relimiting the spine (or the default spine).
GetRelimiters
method in object HybridShapeSweepCircle
Retrieves the elements relimiting the spine (or the default spine).
GetRelimiters
method in object HybridShapeSweepExplicit
Retrieves the elements relimiting the spine (or the default spine).
GetRelimitingGeometry
method in object ManufacturingOperation
Retrieves start / end element on PROFILE CONTOURING operation ONLY.
GetRemovedElem
method in object HybridShapeTrim
Gets the removed feature at a given index.
GetRemovedElem
method in object HybridShapeSplit
Gets the removed feature at a given index.
GetRenderStyleInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the "Render Style" parameter.
GetRepModInfo
method in object IgesSettingAtt
Retrieves information about the Export representation mode setting parameter.
GetReplaceOnlyAfterCurrentInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ReplaceOnlyAfterCurrent" parameter.
GetReportCheckAdvisorInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the ReportCheckAdvisor parameter.
GetReportCheckExpertInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the ReportCheckExpert parameter.
GetReportHtmlInCatiaSessionInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the ReportHtmlInCatiaSession parameter.
GetReportObjectsInformationInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the ReportObjectsInformation parameter.
GetReportOutputDirectoryInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the ReportOutputDirectory parameter.
GetReportParametersInformationInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the ReportParametersInformation parameter.
GetReportPassedObjectsInfo
method in object ReportGenerationSheetSettingAtt
Retrieves environment informations for the ReportPassedObjects parameter.
GetReshapeMode
method in object SchGRRRoute2
Get the reshape mode.
GetResolvedSectionsPathInfo
method in object PathESSRessourcesSettingAtt
Retrieves environment informations for the ResolvedSectionsPath parameter.
GetResource
method in object Task
GetResourceFilterInfo
method in object TreeTabSettingAtt
Retrieves environment informations for the 'Resource Folder' parameter.
GetResourcePath
method in object PspResource
Returns the path value defined for a resource.
GetResourceTreeID
method in object MHILoadParameters
GetResourceValue
method in object PspResource
Returns the value defined for a resource.
GetResultOutputDirInfo
method in object FASReportingSettingAtt
Gets information on "OLP Robot Program Directory" parameter.
GetRevision
method in object Scene
Returns the product's revision number.
GetRmvNotAssgnPrdResOnSyncInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the RmvNotAssgnPrdResOnSync parameter.
GetRobotMotion
method in object Operation
Retrieves the RobotMotion.
GetRobotProgramDirInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP Directory setting parameter.
GetRobotProgramDirectory
method in object OLPTranslator
Retrieves the OLP Directory setting parameter value.
GetRootDLNameCreationRightInfo
method in object DLNameSettingAtt
Retrieves the state of the parameter RootDLNameCreationRight.
GetRootProduct
method in object PCBWorkbench
Allows to get the root product of a document.
GetRootsOfFacts
method in object ExpertRuleBaseRuntime
Retrieves all the roots of facts from the rule base.
GetRotAccelColorInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the RotAccelColor parameter.
GetRotAccelLimitInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the RotAccelLimit parameter.
GetRotSpeedColorInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the RotSpeedColor parameter.
GetRotSpeedLimitInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the RotSpeedLimit parameter.
GetRotationAngle
method in object SchGRRComp
Get the current rotation angle (from x-axis in radian) of the component.
GetRotationAxis
method in object CircPattern
Returns the rotation axis.
GetRotationCenter
method in object CircPattern
Returns the rotation center if the user defined it.
GetRotationSnapAngleInfo
method in object FTASettingAtt
Retrieves informations about the Rotation Snap Angle setting parameter value.
GetRotationSnapAutoInfo
method in object FTASettingAtt
Retrieves informations about the Rotation Snap Auto setting parameter value.
GetRotationSphereModeInfo
method in object VisualizationSettingAtt
Retrieves information about the RotationSphereMode setting parameter.
GetRoutes
method in object SchematicRoot
Returns a list of schematic routes under the root.
GetRowSize
method in object DrawingTable
Returns the height of a row of a drawing table.
GetRuledDevelopableSurfaceConnection
method in object HybridShapeBlend
Returns or sets the ruled developable surface connection type.
GetRunAnnotBehaviorInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunAnnotBehavior parameter.
GetRunAnnotationInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunAnnotation parameter.
GetRunEndConditionInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunEndCondition parameter.
GetRunHlnkBehaviorInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunHlnkBehavior parameter.
GetRunHyperlinkInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunHyperlink parameter.
GetRunPauseInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunPause parameter.
GetRunStateMgtInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunStateMgt parameter.
GetRunStepSizeInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunStepSize parameter.
GetRunTextBehaviorInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunTextBehavior parameter.
GetRunTextMsgInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunTextMsg parameter.
GetRunViewpointInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunViewpoint parameter.
GetRunVisBehaviorInfo
method in object SimulationSettingAtt
Retrieves environment informations for the RunVisBehavior parameter.
GetSHMStdProfPathInfo
method in object CatalogSHMObjectSettingAtt
Retrieves information about the SHMStdProfPath setting parameter.
GetSHMViewFDBeadBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDBeadBTLFeat setting parameter.
GetSHMViewFDCircStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDCircStampBTLFeat setting parameter.
GetSHMViewFDCurveStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDCurveStampBTLFeat setting parameter.
GetSHMViewFDFlgCutBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDFlgCutBTLFeat setting parameter.
GetSHMViewFDFlgCutIMLInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDFlgCutIML setting parameter.
GetSHMViewFDFlgCutOMLInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDFlgCutOML setting parameter.
GetSHMViewFDFlgHoleBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDFlgHoleBTLFeat setting parameter.
GetSHMViewFDFlgHoleIMLInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDFlgHoleIML setting parameter.
GetSHMViewFDFlgHoleOMLInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDFlgHoleOML setting parameter.
GetSHMViewFDOtherStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDOtherStampBTLFeat setting parameter.
GetSHMViewFDStiffStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDStiffStampBTLFeat setting parameter.
GetSHMViewFDSurfFlgBTLFeatBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfFlgBTLFeatBF setting parameter.
GetSHMViewFDSurfFlgBTLFeatHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfFlgBTLFeatHF setting parameter.
GetSHMViewFDSurfFlgBTLSuppBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfFlgBTLSuppBF setting parameter.
GetSHMViewFDSurfFlgBTLSuppHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfFlgBTLSuppHF setting parameter.
GetSHMViewFDSurfFlgIMLBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfFlgIMLBF setting parameter.
GetSHMViewFDSurfFlgIMLHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfFlgIMLHF setting parameter.
GetSHMViewFDSurfFlgOMLBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfFlgOMLBF setting parameter.
GetSHMViewFDSurfFlgOMLHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfFlgOMLHF setting parameter.
GetSHMViewFDSurfStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDSurfStampBTLFeat setting parameter.
GetSHMViewFDUserStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFDUserStampBTLFeat setting parameter.
GetSHMViewFPBeadBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPBeadBTLFeat setting parameter.
GetSHMViewFPCircStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPCircStampBTLFeat setting parameter.
GetSHMViewFPCurveStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPCurveStampBTLFeat setting parameter.
GetSHMViewFPFlgCutBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPFlgCutBTLFeat setting parameter.
GetSHMViewFPFlgCutIMLInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPFlgCutIML setting parameter.
GetSHMViewFPFlgCutOMLInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPFlgCutOML setting parameter.
GetSHMViewFPFlgHoleBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPFlgHoleBTLFeat setting parameter.
GetSHMViewFPFlgHoleIMLInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPFlgHoleIML setting parameter.
GetSHMViewFPFlgHoleOMLInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPFlgHoleOML setting parameter.
GetSHMViewFPOtherStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPOtherStampBTLFeat setting parameter.
GetSHMViewFPStiffStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPStiffStampBTLFeat setting parameter.
GetSHMViewFPSurfFlgBTLFeatBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgBTLFeatBF setting parameter.
GetSHMViewFPSurfFlgBTLFeatHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgBTLFeatHF setting parameter.
GetSHMViewFPSurfFlgBTLSuppBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgBTLSuppBF setting parameter.
GetSHMViewFPSurfFlgBTLSuppHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgBTLSuppHF setting parameter.
GetSHMViewFPSurfFlgCLBBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgCLBBF setting parameter.
GetSHMViewFPSurfFlgCLBHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgCLBHF setting parameter.
GetSHMViewFPSurfFlgIMLBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgIMLBF setting parameter.
GetSHMViewFPSurfFlgIMLHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgIMLHF setting parameter.
GetSHMViewFPSurfFlgOML2BFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgOML2BF setting parameter.
GetSHMViewFPSurfFlgOML2HFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgOML2HF setting parameter.
GetSHMViewFPSurfFlgOMLBFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgOMLBF setting parameter.
GetSHMViewFPSurfFlgOMLHFInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfFlgOMLHF setting parameter.
GetSHMViewFPSurfStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPSurfStampBTLFeat setting parameter.
GetSHMViewFPUserStampBTLFeatInfo
method in object ViewCharacteristicCurvesSettingAtt
Retrieves information about the SHMViewFPUserStampBTLFeat setting parameter.
GetSMARTEAMClassID
method in object StiEngine
Returns the Class Identifier of a SmarTeam Integration Object CATIAStiDBItem -at least saved in SmarTeam.
GetSMARTEAMObjectID
method in object StiEngine
Returns the Object Identifier of a SmarTeam Integration Object CATIAStiDBItem -at least saved in SmarTeam.
GetSVGViewerInfo
method in object FASReportingSettingAtt
Gets information on "OLP Robot Program Directory" parameter.
GetSafetyPlane
method in object ManufacturingSetup
Retrieves the Safety Plane from a Manufacturing Setup.
GetSameDisplayInfo
method in object UnitsSheetSettingAtt
Retrieves environment informations for the SameDisplay parameter.
GetSamplePosition
method in object Replay
Get the sample values.
GetSampleTime
method in object Replay
Get the sample time.
GetSampleds
method in object SampledsNode
GetSaveAsNewTemplateDirectoryInfo
method in object AnalysisPostProSettingAtt
Retrieves environment informations for the SaveAsNewTemplateDirectory parameter.
GetSaveAutoIncrementInfo
method in object RenderingSettingAtt
Retrieves environment informations for the SaveAutoIncrement parameter.
GetSaveCGRInfo
method in object DMUTolSettingAtt
Retrieves informations about the Save in CGR setting parameter value.
GetSaveControlFlowInPROModeInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the SaveControlFlowInPROMode parameter.
GetSaveCoorsysInCgrInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the SaveCoorsysInCgr parameter.
GetSaveInCGRInfo
method in object FTAInfraSettingAtt
Retrieves information about the Save In CGR setting parameter value.
GetSavePPRNoDetailingInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the SavePPRNoDetailing parameter.
GetSaveRelationToUnExposedPartInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the SaveRelationToUnExposedPart parameter.
GetSaveShowEffctvtPanelInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the SaveShowEffctvtPanel parameter.
GetSaveV5CalcTimeInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the SaveV5CalcTime parameter.
GetScale
method in object SchGRRComp
Get the current scale factor of the component.
GetSceneDefaultsColor
method in object N4DNavigatorSettingAtt
Returns the scene background color (oRed, oGreen, oBlue: RGB values of the color).
GetSceneDefaultsColorInfo
method in object N4DNavigatorSettingAtt
Retrieves environment informations for the SceneDefaultsColor parameter.
GetSceneProductData
method in object ProductScene
Returns the SceneProductData associated to the given product in the Product-Scene.
GetSchBaseFactory
method in object SchematicRoot
Returns schematic base object factory.
GetSchCntrOwners
method in object SchGRR
Get the schematic objects that own this connector graphic representation.
GetSchExtContainer
method in object SchSession
Get the schematic container (e.
GetSchObjOwner
method in object SchGRR
Get the schematic object that owns this graphic representation.
GetSchematicSession
method in object SchematicRoot
Returns the schematic session the document containing the root is associated with.
GetScoredElement
method in object DrawingDimValue
Get dimension scored element.
GetScriptVarValue
method in object AMPPath
Function to get the value of system variable, "ScriptVar".
GetSearch_Mapping_List
method in object MigrBatchSettingAtt
Retrieves the state of the "Mapping Files Location for Retrieving" setting parameter.
GetSecondAngleLaw
method in object HybridShapeSweepCircle
Retrieves the second angle law useful in some circular sweep types.
GetSecondAxis
method in object Plane
Returns the coordinates of the second plane axis.
GetSecondAxis
method in object PlanarFace
Returns the planar face second axis.
GetSecondDirection
method in object RectPattern
Returns the second repartition direction.
GetSecondDirection
method in object HybridShapeCircleCtrRad
Gets the second direction on the plane to compute the point (for stability).
GetSecondDirection
method in object HybridShapePointOnPlane
Gets the second direction on the plane to compute the point (for stability).
GetSecondLengthDefinitionType
method in object HybridShapeSweepLine
Retrieves the second length definition type.
GetSecondLengthLaw
method in object HybridShapeSweepLine
Retrieves the second length law useful in some linear sweep types.
GetSecondPointCoordinates
method in object Distance
Retrieves the coordinates of the point belonging to the second product, which realizes the distance.
GetSecondPointCoordinates
method in object Conflict
Retrieves the coordinates of the point on the second product which realizes the penetration or minimum distance.
GetSectPatternInfo
method in object FTASettingAtt
Retrieves informations about the Pattern of Visu setting parameter value.
GetSectPatternInfo
method in object DMUTolSettingAtt
Retrieves informations about the Pattern of Visu setting parameter value.
GetSection
method in object HybridShapeSpine
Retrieves a section or a plane.
GetSectionFillInfo
method in object SectioningSettingAtt
Retrieves environment informations for the SectionFill parameter.
GetSectionFromLoft
method in object HybridShapeLoft
Retrieves a loft section information.
GetSectionInfo
method in object Export3DXmlSettingAtt
GetSectionsCatalogPathInfo
method in object PathESSRessourcesSettingAtt
Retrieves environment informations for the SectionsCatalogPath parameter.
GetSeedPoint
method in object SchGRRRouteEllipse
Get the seed point of the route graphic ellipse.
GetSegmentData
method in object ArrBendableString
Returns the data of the segment (Point Indices, Slope angle, Rotation Angle).
GetSegmentValues
method in object MoveToPostureActivity
GetSelectPublishedGeometryInfo
method in object FTASettingAtt
Retrieves informations about the Select Published Geometry setting parameter value.
GetSelectedEdgeRGB
method in object VisualizationSettingAtt
Returns the SelectedEdgeRGB parameter.
GetSelectedEdgeRGBInfo
method in object VisualizationSettingAtt
Retrieves information about the SelectedEdgeRGB setting parameter.
GetSelectedElementRGB
method in object VisualizationSettingAtt
Returns the SelectedElementRGB parameter.
GetSelectedElementRGBInfo
method in object VisualizationSettingAtt
Retrieves information about the SelectedElementRGB setting parameter.
GetSelectedObjectID
method in object MHILoadParameters
GetServerTimeOutInfo
method in object LicenseSettingAtt
Retrieves information about the TimeOut setting parameter.
GetShaderModeInfo
method in object VisualizationSettingAtt
Retrieves information about the ShaderMode setting parameter.
GetShadowColor
method in object RenderingLight
Returns the color of a shadow.
GetShapeColor
method in object ColorSTDObjectSettingAtt
Returns or sets the ShapeColor parameter.
GetShapeColorInfo
method in object ColorSTDObjectSettingAtt
Retrieves environment informations for the ShapeColor parameter.
GetShapePathName
method in object Product
Returns the path name of a shape for a given shape name.
GetShapeRepresentation
method in object Product
Retrieves the product's representation with the given parameters.
GetShiftedProfileInfo
method in object FTASettingAtt
Retrieves informations about the Shifted Profile setting parameter value.
GetShow
method in object VisPropertySet
Returns the state show mode for the current selection.
GetShowActivationInfo
method in object TreeVizManipSettingAtt
Retrieves environment informations for the visualization Show/NoShow's mode applied to the specification tree.
GetShowCompletionDialogBoxInfo
method in object IgesSettingAtt
Retrieves information about the Show/No Show dialog box setting parameter.
GetShowLicenseInfo
method in object LicenseSettingAtt
Retrieves information about the ShowLicense setting parameter.
GetShowOnlyFilteredObjectsInfo
method in object MfgHubSettingAtt
Retrieves environment informations for the ShowOnlyFilteredObjects parameter.
GetShowParametersInfo
method in object FunctionalSystemSettingAtt
Retrieves environment informations for the ShowParameters parameter.
GetShowRelationsInfo
method in object FunctionalSystemSettingAtt
Retrieves environment informations for the ShowRelations parameter.
GetShowSynchroStatusOfLocalParamCacheInfo
method in object FunctionalSystemSettingAtt
Retrieves environment informations for the ShowSynchroStatusOfLocalParamCache parameter.
GetSideStepAngleInfo
method in object HtsGeneralSettingAtt
Retrieves environment informations for the SideStepAngle parameter.
GetSightDirection
method in object Viewpoint3D
Gets the components of the sight direction of the viewpoint.
GetSightDirection
method in object AnnotatedView
Retrieves the components of the sight direction of the 3D viewpoint of the annotated view.
GetSimplify
method in object HybridShapeAssemble
Get the simplify flag.
GetSingularColorInfo
method in object RobAnalysisSettingAtt
Retrieves environment informations for the SingularColor parameter.
GetSize
method in object HybridShapePlaneMean
Gets the size of the list (number of points).
GetSize
method in object HybridShapeIntegratedLaw
Gets the size of the list in the law i.
GetSizeControlInfo
method in object CacheSettingAtt
Retrieves environment informations for the size control mode.
GetSizeTypeInfo
method in object TreeVizManipSettingAtt
Retrieves environment informations for the type of size applied to the text of the specification tree.
GetSnapAngleDistanceInfo
method in object ManipSettingAtt
Retrieves environment informations for the SnapAngleDistance parameter.
GetSnapPositionInfo
method in object ManipSettingAtt
Retrieves environment informations for the SnapPosition parameter.
GetSolidMUInfo
method in object V4V5SpaceSettingAtt
Retrieves information about the Solid Mock-Up Migration Mode setting parameter.
GetSource
method in object Scene
Returns the product's source.
GetSpacingCode
method in object SchFrameInfo
Get the frame spacing code.
GetSpatial
method in object PspPhysical
Returns the Spatial object.
GetSpecularColor
method in object RenderingMaterial
Returns the specular color of a material.
GetSpeedValue
method in object GenericMotionProfile
Retrieves speed value of the Profile.
GetSpine
method in object HybridShapeLoft
Gets the spine of the lofted surface.
GetSplineType
method in object HybridShapeSpline
Gets the spline type.
GetSplitFunctionalObjectNameInfo
method in object FunctionalSystemSettingAtt
Retrieves environment informations for the SplitFunctionalObjectName parameter.
GetStandardInfo
method in object FTAInfraSettingAtt
Retrieves information about the Tolerancing Standard setting parameter value.
GetStartAndEndSectionTangent
method in object HybridShapeLoft
Gets the start and end section tangents of the lofted surface.
GetStartPoint
method in object SchGRRRoute
Get the start point of the route graphic.
GetStartPointGeometry
method in object ManufacturingOperation
Retrieves geometry and offset of a start point on POCKETING operation ONLY.
GetStartSegment
method in object SWKIKConstraint
Returns the start segment of the IK chain of the constraint.
GetStartTangentDirectionFlag
method in object HybridShapeConic
Retrieves the tangent direction orientation at the conic start point.
GetStartUp_Model_For_DrawingInfo
method in object MigrBatchSettingAtt
Retrieves information about the "Initial Drawing Path" setting parameter.
GetStateName
method in object DNB3DState
GetStaticCullInfo
method in object VisualizationSettingAtt
Retrieves information about the StaticCull setting parameter.
GetStaticLODInfo
method in object VisualizationSettingAtt
Retrieves information about the StaticLOD setting parameter.
GetStatus
method in object SchInternalFlow
Get insertion flow status.
GetStepByStepUpdateAndRerouteInfo
method in object SpecV4SettingAtt
Retrieves information about the StepByStepUpdateAndReroute setting parameter.
GetStereoModeInfo
method in object VisualizationSettingAtt
Retrieves information about the StereoMode setting parameter.
GetStiDBItemFromAnyObject
method in object StiEngine
Returns the SmarTeam Integration Object CATIAStiDBItem from an AnyObject object.
GetStiDBItemFromCATBSTR
method in object StiEngine
Returns the SmarTeam Integration Object CATIAStiDBItem from a Full Path .
GetStockFromSetup
method in object ManufacturingSetup
Retrieves the path of the Stock file from a Manufacturing Setup.
GetStringAttribute
method in object E5Property
GetStringUsedAsCarriageReturnInfo
method in object FunctionalSystemSettingAtt
Retrieves environment informations for the StringUsedAsCarriageReturn parameter.
GetStringUserAttribute
method in object Fastener
eturns the value of user attribute whoes name matches the input string.
GetStyleSheetDirInfo
method in object FASReportingSettingAtt
Gets information on "OLP Robot Program Directory" parameter.
GetStyleSheetPathInfo
method in object WorkGeneralSettingAtt
Retrieves environment informations for the StyleSheetPath parameter.
GetSubElement
method in object HybridShapeAssemble
Retrieves a sub element used by the hybrid shape assemble feature object.
GetSubElementsSize
method in object HybridShapeAssemble
Returns the size of the list of sub-elements to remove in the hybrid shape assemble feature object.
GetSubItem
method in object ArrSystemLineProduct
Allows the user to get the item at a specific index location.
GetSubProductsCount
method in object ArrSystemLineProduct
Returns the count of the sub-products that make up the System-Line Arrangement Product and that match a specifc interface id.
GetSupport
method in object HybridShapeBlend
Returns a support from the blend.
GetSupport
method in object HybridShapeSpline
Gets the support surface.
GetSupport
method in object HybridShapeExtractMulti
Returns the support of the list of constraints at specified position.
GetSupportAtPosition
method in object HybridShapeFill
Retrieves the support at specified position in the hybrid shape fill feature object.
GetSupportedRelations
method in object MHIRelationManagement
This method lists all the possible values that can passed as the relation name for “DNBIAMHIRelationManagement#GetRelationObject” method.
GetSupports
method in object ABQMassScaling
Gets the supports that define the mass scaling region(s).
GetSupports
method in object ABQRigidCoupling
Returns the supports for the coupling.
GetSupports
method in object ABQSmoothCoupling
Returns the supports for the coupling.
GetSuppressMode
method in object HybridShapeAssemble
Get the SuppressMode flag.
GetSurface
method in object StrComputeServices
Returns the surface for a structure object.
GetSurfaceAccuracyInfo
method in object Export3DXmlSettingAtt
Retrieves environment informations for the surface accuracy setting.
GetSurfaceElementsLocationInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "SurfaceElementsLocation" parameter.
GetSurfaces
method in object Annotation
Get the geometry on which the Annotation is applied to.
GetSurfacesCount
method in object Annotation
Count the geometry on which the Annotation is applied to.
GetSymbColor
method in object DrawingDimLine
Get symbol color of dimension line.
GetSymbThickness
method in object DrawingDimLine
Get symbol thickness of dimension line.
GetSymbType
method in object DrawingDimLine
Get symbol type of dimension line.
GetSymbol
method in object DrawingWelding
Returns the symbol of the drawing welding.
GetSymbol
method in object SchGRRCntr
Get the graphical primitive of a connector.
GetSymbolType
method in object VisPropertySet
Retrieves the symbol type for the current selection.
GetSymbolcTransformations
method in object SetOfEquation
Returns whether the Gauss method is used during the symbolic transformation.
GetSymmetricalExtension
method in object HybridShapeLinePtPt
Gets whether the symmetrical extension of the line is active.
GetSymmetricalExtension
method in object HybridShapeLinePtDir
Gets whether the symmetrical extension of the line is active.
GetSymmetricalExtension
method in object HybridShapeLineAngle
Gets whether the symmetrical extension of the line is active.
GetSymmetricalExtension
method in object HybridShapeLineNormal
Gets whether the symmetrical extension of the line is active.
GetSymmetricalExtension
method in object HybridShapeLineTangency
Gets whether the symmetrical extension of the line is active.
GetSymmetricalExtension
method in object HybridShapeLineBisecting
Gets whether the symmetrical extension of the line is active.
GetSyncAnlSpecsInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the SyncAnlSpecs parameter.
GetSyncTimeAndSpeedInSimulationInfo
method in object HtsGeneralSettingAtt
Retrieves environment informations for the SyncTimeAndSpeed parameter.
GetTCPOffset
method in object GenericToolProfile
Retrieve the underlying x,y,z, roll, pitch, yaw of the Tool TCP offset.
GetTCPTraceMode
method in object TCPTraceActivity
Indicates if the tracing capability is active or not.
GetTableCurrentAbsolutePosition
method in object ManufacturingProgram
Get the current absolute position of the Machine Table.
GetTag
method in object TagGroup
Returns a Tag by Index.
GetTag
method in object PointFastener
eturns a DELMIATag object from fastener Example: MyTag = MyFastener.
GetTagList
method in object TagGroup
GetTagTarget
method in object RobotMotion
Retrieves the underlying Tag Target.
GetTangency
method in object HybridShapeSweepConic
Gets tangency surface or curve and its angle given the guide curve index.
GetTangencyAngleLawInversion
method in object HybridShapeSweepConic
Gets information whether tangency angle law has to be inverted or not for a specified guide curve.
GetTangencyChoiceNo
method in object HybridShapeSweepCircle
Retrieves a sequence which identifies a solution among all possibilities of a circular profile sweep tangent to a surface.
GetTangencyContinuity
method in object HybridShapeAssemble
Get the tangency continuity checker flag.
GetTangencyLaw
method in object HybridShapeSweepConic
Gets tangency surface or curve and its angle given the guide curve index.
GetTangent
method in object Curve2D
Returns the unit-vector tangent at the parameter specified.
GetTangent
method in object ControlPoint2D
GetTangentNorm
method in object HybridShapeSpline
Returns the tension for each point of the spline.
GetTarget
method in object RenderingLight
Returns the coordinates of the target point of the light.
GetTargetDevice
method in object AMPPath
Function to get the target device of the AMPPath.
GetTargetLine
method in object SWKIKConstraint
Get the target points coordinates of a line This method retrieves the origin point coordinates as (x, y, z) data and the direction value of a line.
GetTargetPlane
method in object SWKIKConstraint
Get the target points coordinates of a line This method retrieves the origin point coordinates as (x, y, z) data and the direction value of a line.
GetTargetPoint
method in object SWKIKConstraint
Get the target point coordinates.
GetTargetType
method in object RobotMotion
Retrieves the Target Type.
GetTask
method in object ResourceProgramManager
Retrieves the Tasks corresponding to the given Task Name.
GetTeamPDMURL
method in object StiEngine
Returns the Team PDM URL of a CATIAStiDBItem.
GetTechnicalDocumentationPathInfo
method in object DocumentationSettingAtt
Retrieves environment informations for the technical documentation location parameter.
GetTechnologicalDatas
method in object Shot
Retrieves all the data associated to the part.
GetTechnologicalObject
method in object Activity
Returns the process's applicative data which type is the given parameter.
GetTechnologicalObject
method in object Product
Returns the product's applicative data which type is the given parameter.
GetTechnologicalObject
method in object ArrangementRun
Returns the applicative data which type is the given parameter.
GetTechnologicalObject
method in object ArrangementArea
Returns the applicative data whose type is the given parameter.
GetTechnologicalObject
method in object ArrangementProduct
Returns the product's applicative data which type is the given parameter.
GetTechnologicalObject
method in object ArrangementPathway
Returns the applicative data which type is the given parameter.
GetTechnologicalObject
method in object ArrangementBoundary
Returns the applicative data whose type is the given parameter.
GetTechnologicalObject
method in object ArrangementRectangle
Returns the applicative data which type is the given parameter.
GetTechnologicalObject
method in object ArrangementItemReservation
Returns the applicative data whose type is the given parameter.
GetTempDependentFilmCoeffTable
method in object ABQFilmCondition
Returns a list of temperature dependent film coefficients if the film condition is temperature dependent.
GetTempOutputDirectoryInfo
method in object AnalysisReportingSettingAtt
Retrieves environment informations for the TempOutputDirectory parameter.
GetTemplateBooleanAttribute
method in object IPDTemplateProperty
GetTemplateDoubleAttribute
method in object IPDTemplateProperty
GetTemplateLongAttribute
method in object IPDTemplateProperty
GetTemplateStringAttribute
method in object IPDTemplateProperty
GetTemporaryListFactory
method in object SchematicRoot
Returns the factory to create lists of various types.
GetTensionInDouble
method in object HybridShapeBlend
Returns the tension values of a limit of the blend.
GetTensionType
method in object HybridShapeBlend
Returns the tension type of a limit of the blend.
GetTerminationAttrListInfo
method in object PlugMapViewSettingAtt
Retrieves environment informations for the TerminationAttrList parameter.
GetTextColor
method in object MeasureSettingAtt
Returns the TextColor parameter .
GetTextColorInfo
method in object MeasureSettingAtt
Retrieves environment informations for the TextColor parameter.
GetTextMigrationInfo
method in object V4V5SpaceSettingAtt
Retrieves information about the 3D Text Migration setting parameter.
GetTextPositions
method in object Marker3D
Retrieves the coordinates of the positions of a text marker 3D.
GetTextRange
method in object DrawingWelding
Returns the field of the drawing welding in a drawing text range.
GetTextRange
method in object DrawingTextRange
Returns a drawing text range within another drawing text range.
GetThematicsParameterInfo
method in object GlobalStatisticsSettingAtt
Retrieves environment informations for the global statistics parameters.
GetThematicsParameterInfo
method in object GeneralStatisticsSettingAtt
Retrieves environment informations for the general statistics parameters.
GetThickness
method in object TCPTrace
Get the TCP trace component (DNBTCPTraceReps) thickness(for line, axis).
GetThicknessListPathInfo
method in object PathESSRessourcesSettingAtt
Retrieves environment informations for the ThicknessListPath parameter.
GetTieSupports
method in object ABQRigidBodyConstraint
Gets the tie point supports for the rigid body.
GetTildeDisplayInfo
method in object MeasureSettingAtt
Retrieves environment informations for the TildeDisplay parameter.
GetTimeAmplitudeTable
method in object ABQTabularAmplitude
Returns a list of time and amplitude for the specified timespan (STEP_TIME or TOTAL_TIME).
GetTimeAmplitudeTable
method in object ABQSmoothStepAmplitude
Returns a list of time and amplitude for the specified timespan (STEP_TIME or TOTAL_TIME).
GetTimestampModeInfo
method in object CacheSettingAtt
Retrieves environment informations for the timestamp control mode.
GetTolJoinInfo
method in object IgesSettingAtt
Retrieves information about the join tolerance setting parameter.
GetTolOptInvalidGeomInfo
method in object IgesSettingAtt
Retrieves information about the InvalidGeom Tolerance setting parameter.
GetToleranceInfo
method in object IgesSettingAtt
Retrieves information about the Tolerance ( optimize - fitting ) setting parameter.
GetTolerances
method in object DrawingDimension
Get tolerance infomation of dimension value.
GetToolAxis
method in object ManufacturingActivity
Retreives the ToolAxis coordinates of a Manufacturing Activity.
GetToolChangePoint
method in object ManufacturingSetup
Get the ToolChange point of the machine linked to a Manufacturing Setup.
GetToolGage
method in object ManufacturingOperation
Retrieves the minimum tool cutting lentgh and the minimum tool gage length.
GetToolMobility
method in object GenericToolProfile
Retrieves tool mobility.
GetToolProfile
method in object RobotMotion
Retrieves tool profile.
GetToolProfile
method in object RobGenericController
Get tool profile given name.
GetToolProfileCount
method in object RobGenericController
Get number of tool profiles in controller.
GetToolProfiles
method in object RobGenericController
Get tool profiles list in controller.
GetTotalDuration
method in object Sampled
GetTraceAxisColorInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceAxisColor parameter.
GetTraceAxisThickInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceAxisThick parameter.
GetTraceAxisTypeInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceAxisType parameter.
GetTraceAxisVisuInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceAxisVisu parameter.
GetTraceDeletePathInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceDeletePath parameter.
GetTraceLegendInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceLegend parameter.
GetTraceLineColorInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceLineColor parameter.
GetTraceLineThickInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceLineThick parameter.
GetTraceLineTypeInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceLineType parameter.
GetTraceLineVisuInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TraceLineVisu parameter.
GetTracePointColorInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TracePointColor parameter.
GetTracePointSymbolInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TracePointSymbol parameter.
GetTracePointVisuInfo
method in object SimTraceSettingAtt
Retrieves environment informations for the TracePointVisu parameter.
GetTrackAutoUpdateInfo
method in object FittingSettingAtt
Retrieves environment information for the TrackAutoUpdate parameter.
GetTrajectoryEndPointCoord
method in object ManufacturingOperation
Retrieve the Machining Operation's trajectory end point.
GetTrajectoryEndPointCoord
method in object ManufacturingCopyTransformation
Retrieves the Manufacturing Copy Order trajectory end point.
GetTrajectoryStartPointCoord
method in object ManufacturingOperation
Retrieve the Machining Operation's trajectory start point.
GetTrajectoryStartPointCoord
method in object ManufacturingCopyTransformation
Retrieves the Manufacturing Copy Order Operation's trajectory start point.
GetTransformMatrix
method in object SchCntrConnect
Get the transformation matrix needed to transform 'this' connector to be coincident and aligned with the 'connect to' connector.
GetTransformation2D
method in object SchGRRComp
Get the local coordinate reference frame (with respect to absolute coordinate system) of the component.
GetTransition
method in object HybridShapeBlend
Returns the transition orientation from a limit of the blend.
GetTranslatorModeInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the Translator mode parameter.
GetTransparencyColor
method in object RenderingMaterial
Returns the transparent color of a material.
GetTransparencyModeInfo
method in object VisualizationSettingAtt
Retrieves information about the TransparencyMode setting parameter.
GetTravelColorInfo
method in object DevAnalysisSettingAtt
Retrieves environment informations for the TravelColor parameter.
GetTravelLimitInfo
method in object DevAnalysisSettingAtt
Retrieves environment informations for the TravelLimit parameter.
GetTrickyFace
method in object HybridShapeOffset
Returns the invalid face object on the object.
GetTrimSupport
method in object HybridShapeBlend
Returns whether a support of the blend will be trimmed off.
GetTrueColorModeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "ColorInheritanceMode" parameter.
GetTrueDimensionColor
method in object FTASettingAtt
Returns the TrueDimensionColor parameter.
GetTrueDimensionColorInfo
method in object FTASettingAtt
Retrieves environment informations for the TrueDimensionColor parameter.
GetTrueDimensionInfo
method in object FTASettingAtt
Retrieves environment informations for the TrueDimension parameter.
GetTurnNumbers
method in object RobotMotion
Retrieves the Turn Numbers(or Turn signs) of the robot motion.
GetTwoSideLightingModeInfo
method in object VisualizationSettingAtt
Retrieves information about the TwoSideLightingMode setting parameter.
GetType
method in object AMPTag
Function to get the type of the given AMPTag.
GetType
method in object TCPTrace
Get the TCP trace component (DNBTCPTraceReps) type.
GetType
method in object Tag
Get Frame Type of the Tag by Name.
GetType
method in object AnalysisMaterial
Returns the analysis type (Ex: MATERIAL_ORTHOTROPIC, MATERIAL_ISOTROPIC).
GetType
method in object PspAttribute
Retrieves type of the input attribute.
GetType
method in object RenderingEnvironment
Returns the environment type.
GetType
method in object ManufacturingToolMotion
Retrieves the type of a Manufacturing ToolMotion.
GetTypeBaseFrmInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the TypeBaseFrm parameter.
GetTypeCoorsysInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the TypeCoorsys parameter.
GetTypeInfo
method in object TreeVizManipSettingAtt
Retrieves environment informations for the type applied to the specification tree.
GetTypeOfIconOnFunctionalElementInfo
method in object FunctionalSystemSettingAtt
Retrieves environment informations for the TypeOfIconOnFunctionalElement parameter.
GetTypeToolFrmInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the TypeToolFrm parameter.
GetTypeWclPathInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the TypeWclPath parameter.
GetUGActiveLayersOnlyInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the UGActiveLayersOnly parameter.
GetUGDrawingNameInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the UGDrawingName parameter.
GetUGLayerNumbersInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the UGLayerNumbers parameter.
GetUGOpenSurfacesInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the UGOpenSurfaces parameter.
GetUIStyleInfo
method in object GeneralSessionSettingAtt
Retrieves environment informations for the user interface style parameter.
GetUTCTimeFormatInfo
method in object CacheSettingAtt
Retrieves environment informations for the timestamp control mode.
GetUgReferenceSetInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the UgReferenceSet parameter.
GetUnassociatedSymbols
method in object SchematicRoot
Returns a list of unassociated symbol.
GetUnderFeatureInfo
method in object FTAInfraSettingAtt
Retrieves information about the Under Geometric Feature Nodes setting parameter value.
GetUnderIntensifiedRGB
method in object VisualizationSettingAtt
Returns the UnderIntensifiedRGB parameter.
GetUnderIntensifiedRGBInfo
method in object VisualizationSettingAtt
Retrieves information about the UnderIntensifiedRGB setting parameter.
GetUnderSetInfo
method in object FTAInfraSettingAtt
Retrieves information about the Under Annotation Set Node setting parameter value.
GetUnderViewInfo
method in object FTAInfraSettingAtt
Retrieves information about the Under View/Annotation Plane Nodes setting parameter value.
GetUpDirection
method in object Viewpoint3D
Gets the components of the up direction of the viewpoint.
GetUpDirection
method in object AnnotatedView
Retrieves the components of the up direction of the 3D viewpoint of the annotated view.
GetUpDirection
method in object PspPartConnector
Returns the UP direction of the connector.
GetUpdateAnalysisInSimulationInfo
method in object HtsGeneralSettingAtt
Retrieves environment informations for the UpdateAnalysisInSimulation parameter.
GetUpdateElementsRefreshedInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "UpdateElementsRefreshed" parameter.
GetUpdateLinkedExternalReferencesInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "UpdateLinkedExternalReferences" parameter.
GetUpdateModeInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "UpdateMode" parameter.
GetUpdateNeededRGB
method in object VisualizationSettingAtt
Returns the UpdateNeededRGB parameter.
GetUpdateNeededRGBInfo
method in object VisualizationSettingAtt
Retrieves information about the UpdateNeededRGB setting parameter.
GetUpdateResultInfo
method in object SectioningSettingAtt
Retrieves environment informations for the UpdateResult parameter.
GetUpdateStatusModeInfo
method in object AsmGeneralSettingAtt
Retrieves informations about the update status computation setting parameter.
GetUpdateStoppedOnErrorInfo
method in object PartInfrastructureSettingAtt
Retrieves environment informations for the "UpdateStoppedOnError" parameter.
GetUploaderDirInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP Parser Directory setting parameter.
GetUploaderInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP Parser setting parameter.
GetUsageLimitInfo
method in object MemoryWarningSettingAtt
Retrieves environment informations for the alert percentage.
GetUseStyleCreateObjectsInfo
method in object DraftingSettingAtt
Retrieves environment informations for the UseStyleCreateObjects parameter.
GetUserProfilesList
method in object OperationProfile
Retreives the list of User Profiles for the Operation.
GetUserWalkSpeedStatusInfo
method in object HtsGeneralSettingAtt
Retrieves environment informations for the UserWalkSpeedStatus parameter.
GetV4V5_FDTInfo
method in object CGRAdhesionSettingAtt
Retrieves information about the V4V5_FDT container activation state.
GetV4_Model_CommentPageInfo
method in object CGRAdhesionSettingAtt
Locks or unlocks the V4_Model_CommentPage container activation state.
GetV4_Model_LnFInfo
method in object CGRAdhesionSettingAtt
Retrieves information about the V4_Model_LnF container activation state.
GetV4_Part_DefinitionInfo
method in object MigrBatchSettingAtt
Retrieves information about the "V4 Part Definition" setting parameter.
GetV5_SPAInfo
method in object CGRAdhesionSettingAtt
Retrieves information about the V5_SPA container activation state.
GetValue
method in object AnalysisMaterial
Returns an analysis value of the material.
GetValue
method in object DrawingDimension
Returns the drawing value of the drawing dimension.
GetValue
method in object BasicComponent
Return the value corresponding to the given coordinates.
GetValue
method in object AnalysisEntity
Returns the value corresponding to the given component.
GetValue
method in object AnalysisLocalEntity
Returns the value corresponding to the given component.
GetValues
method in object ManufacturingToolCorrector
Gives the corrector values.
GetVectorInfo
method in object FittingSettingAtt
Retrieves environment information for the VisualizationMode parameter.
GetVectors
method in object AxisSystem
Returns the coordinates X,Y,Z of the axes X and Y of the axis system.
GetVelocityColorInfo
method in object DevAnalysisSettingAtt
Retrieves environment informations for the VelocityColor parameter.
GetVelocityLimitInfo
method in object DevAnalysisSettingAtt
Retrieves environment informations for the VelocityLimit parameter.
GetVerticalAxis
method in object RenderingEnvironment
Returns the coordinates of the vertical axis vector of the environment.
GetVia
method in object AMPTag
Function to get the via status of the given AMPTag.
GetViaMode
method in object Operation
Retrieves the via mode of the operation.
GetViewAnalysisParameterInfo
method in object AnalysisGeneralSettingAtt
Retrieves environment informations for the parameter.
GetViewAnalysisRelationInfo
method in object AnalysisGeneralSettingAtt
Retrieves environment informations for the parameter.
GetViewAssociativityInfo
method in object FTAInfraSettingAtt
Retrieves information about the View Associativity setting parameter value.
GetViewBackgroundModeInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the ViewBackgroundMode parameter.
GetViewFilterCreationModeInfo
method in object Layout2DSettingAtt
Retrieves environment informations for the ViewFilterCreationMode parameter.
GetViewName
method in object DrawingView
Returns the prefix, the ident and the suffix of the name of the drawing view.
GetViewName
method in object Layout2DView
Returns the prefix, the ident and the suffix of the name of the Layout2D view.
GetViewProfileInfo
method in object FTAInfraSettingAtt
Retrieves information about the View Profile setting parameter value.
GetViewReferentialInfo
method in object FTAInfraSettingAtt
Retrieves information about the View Referential setting parameter value.
GetViewReferentialZoomableInfo
method in object FTAInfraSettingAtt
Retrieves information about the View Referential Zoomable setting parameter value.
GetViewerAutoOpenInfo
method in object SectioningSettingAtt
Retrieves environment informations for the ViewerAutoOpen parameter.
GetViewerAutoReframeInfo
method in object SectioningSettingAtt
Retrieves environment informations for the ViewerAutoReframe parameter.
GetViewerLock2DInfo
method in object SectioningSettingAtt
Retrieves environment informations for the ViewerLock2D parameter.
GetViewpointAnimationModeInfo
method in object VisualizationSettingAtt
Retrieves information about the ViewpointAnimationMode setting parameter.
GetVisBaseFrmInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the VisBaseFrm parameter.
GetVisCoorsysInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the VisCoorsys parameter.
GetVisToolFrmInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the VisToolFrm parameter.
GetVisWclPathInfo
method in object ImportD5SettingAtt
Retrieves environment informations for the VisWclPath parameter.
GetVisibility
method in object TCPTrace
Get the TCP trace component (DNBTCPTraceReps) visibility status.
GetVisibility
method in object DrawingDimExtLine
Get visivility of dimension extension line.
GetVisibleColor
method in object VisPropertySet
Retrieves the displayed (visible) color for the current selection.
GetVisibleInheritance
method in object VisPropertySet
Checks if the real property is hidden.
GetVisibleLineType
method in object VisPropertySet
Retrieves the displayed (visible) line type for the current selection.
GetVisibleOpacity
method in object VisPropertySet
Retrieves the displayed (visible) opacity for the current selection.
GetVisibleWidth
method in object VisPropertySet
Retrieves the displayed (visible) line width for the current selection.
GetVisuFormatUnitInfo
method in object MultiCADSettingAtt
Retrieves environment informations for the VisuFormatUnit parameter.
GetVisu_Mode_2DInfo
method in object MigrBatchSettingAtt
Retrieves information about the "Projection of Space for transparent views" setting parameter.
GetVisualizationModeInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the VisualizationMode parameter.
GetViz2DAccuracyModeInfo
method in object VisualizationSettingAtt
Retrieves information about the 2DAccuracyMode setting parameter.
GetViz2DFixedAccuracyInfo
method in object VisualizationSettingAtt
Retrieves information about the 2DFixedAccuracy setting parameter.
GetViz2DProportionnalAccuracyInfo
method in object VisualizationSettingAtt
Retrieves information about the 2DProportionnalAccuracy setting parameter.
GetViz3DAccuracyModeInfo
method in object VisualizationSettingAtt
Retrieves information about the Viz3DAccuracyMode setting parameter.
GetViz3DCurveAccuracyInfo
method in object VisualizationSettingAtt
Retrieves information about the 3DCurveAccuracy setting parameter.
GetViz3DFixedAccuracyInfo
method in object VisualizationSettingAtt
Retrieves information about the 3DFixedAccuracy setting parameter.
GetViz3DProportionnalAccuracyInfo
method in object VisualizationSettingAtt
Retrieves information about the Viz3DProportionnalAccuracy setting parameter.
GetVolume
method in object StrComputeServices
Returns the volume for a structure object.
GetVoxelStaticAnlInfo
method in object AnalysisSettingAtt
Retrieves environment informations for the VoxelStaticAnl parameter.
GetVoxelsInfo
method in object CGRAdhesionSettingAtt
Retrieves information about the Voxels container activation state.
GetWalkActColorInfo
method in object HtsTaskDisplaySettingAtt
Retrieves environment informations for the WalkActColor parameter.
GetWalkActLineTypeInfo
method in object HtsTaskDisplaySettingAtt
Retrieves environment informations for the WalkActLineType parameter.
GetWalkActLineWeightInfo
method in object HtsTaskDisplaySettingAtt
Retrieves environment informations for the WalkActLineWeight parameter.
GetWalkCurveDefPoints
method in object WalkActivity
GetWalkForwardAngleInfo
method in object HtsGeneralSettingAtt
Retrieves environment informations for the WalkForwardAngle parameter.
GetWalkForwardDistanceInfo
method in object HtsGeneralSettingAtt
Retrieves environment informations for the WalkForwardDistance parameter.
GetWall
method in object RenderingEnvironment
Returns the environment walls.
GetWeldSpeed
method in object AMPTag
Function to get the weld speed of the given AMPTag.
GetWetArea
method in object StrComputeServices
Returns the wet area for a structure object.
GetWindowDefaultHeightInfo
method in object SectioningSettingAtt
Retrieves environment informations for the WindowDefaultHeight parameter.
GetWindowDefaultWidthInfo
method in object SectioningSettingAtt
Retrieves environment informations for the WindowDefaultWidth parameter.
GetWindowOpenModeInfo
method in object SectioningSettingAtt
Retrieves environment informations for the WindowOpenMode parameter.
GetWorkInstructionsInfo
method in object Export3DXmlSettingAtt
Retrieves environment informations for the Work Instructions setting.
GetWorkbench
method in object Document
Returns one of the workbenches of the document.
GetWorkbenchId
method in object Application
Returns the identifier of the CATIA current workbench.
GetX
method in object HybridShapeDirection
Returns the direction X component.
GetXAxis
method in object AxisSystem
Returns the coordinates X,Y,Z of the X axis of the axis system.
GetXMLDirInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP XML Directory setting parameter.
GetXMLFileDirectory
method in object OLPTranslator
Retrieves the XML Directory setting parameter value.
GetXMLSchemaInfo
method in object IgpOlpSettingAtt
Retrieves information about the OLP XML Schema setting parameter.
GetXVal
method in object HybridShapeDirection
Returns the direction X component as Double.
GetXYZ
method in object Tag
Gets the Position(X, Y, Z) of the Tag.
GetY
method in object HybridShapeDirection
Returns the direction Y component.
GetYAxis
method in object AxisSystem
Returns the coordinates X,Y,Z of the Y axis of the axis system.
GetYPR
method in object Tag
Gets the Orientation (Y, P, R) of the Tag.
GetYVal
method in object HybridShapeDirection
Returns the direction Y component as Double.
GetZ
method in object HybridShapeDirection
Returns the direction Z component.
GetZAxis
method in object AxisSystem
Returns the coordinates X,Y,Z of the Z axis of the axis system.
GetZVal
method in object HybridShapeDirection
Returns the direction Z component as Double.
Global
property in object ABQMassScaling
Sets or returns whether the mass scaling is global.
GlobalElemAssignment
property in object ABQAnalysisCase
Returns the Global Element Assignement feature associated with this analysis case.
GlobalIlluminationAccuracy
property in object RenderingShooting
Returns or sets the number of photons to use when estimating radiance for global illumination.
GlobalIlluminationRadius
property in object RenderingShooting
Returns or sets the maximum distance in which photons for global illumination are located.
GlobalIlluminationStatus
property in object RenderingShooting
Returns or sets the global illumination status of shooting.
GlobalPhotonsNumber
property in object RenderingLight
Changes the maximum number of global illumination photons to emit from the light source.
GlobalStatisticsSettingAtt
object
Interface for Global statistic Controler Role : the global statistics controler manages the values of all or only a part of the attributes available for all the statistics thematics.
GlowFlareDiffusion
property in object RenderingShooting
Returns or sets the glow flare diffusion.
GlowFlareFactor
property in object RenderingShooting
Returns or sets the glow flare factor.
GlowIntensity
property in object RenderingShooting
Returns or sets the glow intensity factor.
GlowRadialLineSize
property in object RenderingShooting
Returns or sets the glow radial lines size.
GlowSize
property in object RenderingShooting
Returns or sets the glow filter size in percentage of image size.
GlowStarEffect
property in object RenderingShooting
Returns or sets the glow star effect.
GlowStatus
property in object RenderingShooting
Returns or sets the glow status of shooting.
GlowThreshold
property in object RenderingShooting
Returns or sets the glow color threshold.
GrabAct
object
Interface representing a Grab activity.
GrabbingObject
property in object GrabAct
GrabbingObject
property in object ReleaseAct
Gravity
property in object VisualizationSettingAtt
Returns the Gravity parameter.
GravityAxis
property in object VisualizationSettingAtt
Returns the GravityAxis parameter.
GridAutoFiltering
property in object SectioningSettingAtt
Returns or sets the GridAutoFiltering parameter.
GridAutoResize
property in object SectioningSettingAtt
Returns or sets the GridAutoResize parameter.
GridDisplay
property in object FTAInfraSettingAtt
Returns or sets the Grid Display setting parameter value.
GridHeightStep
property in object SectioningSettingAtt
Returns or sets the GridHeightStep parameter.
GridPositionMode
property in object SectioningSettingAtt
Returns or sets the GridPositionMode parameter.
GridPrimarySpacing
property in object FTAInfraSettingAtt
Returns or sets the Grid Primary Spacing setting parameter value.
GridSecondaryStep
property in object FTAInfraSettingAtt
Returns or sets the Grid Secondary Step setting parameter value.
GridSnapPoint
property in object FTAInfraSettingAtt
Returns or sets the Grid Snap Point setting parameter value.
GridStyle
property in object SectioningSettingAtt
Returns or sets the GridStyle parameter.
GridVPrimarySpacing
property in object FTAInfraSettingAtt
Returns or sets the GridV Primary Spacing setting parameter value.
GridVSecondaryStep
property in object FTAInfraSettingAtt
Returns or sets the GridV Secondary Step setting parameter value.
GridWidthStep
property in object SectioningSettingAtt
Returns or sets the GridWidthStep parameter.
Groove
object
Represents the groove shape.
Ground
property in object Viewer3D
Returns or sets the ground displaying mode.
Group
object
Represents a DMU group.
Group
property in object Shuttle
Returns or sets the associated group object.
Group
property in object FunctionalAction
Get the Group property.
Group
property in object Section
Returns or sets the sectionned group.
Groups
object
A collection of all groups currently managed by the application.
Groups
property in object PspGroupable
Returns a list of Groups to which this object is a member.
Groups
property in object NavigatorWorkbench
Returns the Groups collection.
GuideDeviation
property in object HybridShapeSweepLine
Returns the deviation value (length) from guide curves allowed during a sweeping operation in order to smooth it.
GuideDeviation
property in object HybridShapeSweepConic
Returns deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
GuideDeviation
property in object HybridShapeSweepCircle
Returns the deviation value (length) from guide curves allowed during a sweeping operation in order to smooth it.
GuideDeviation
property in object HybridShapeSweepExplicit
Returns deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
GuideDeviationActivity
property in object HybridShapeSweepLine
Returns or sets whether a deviation from guide curves is allowed.
GuideDeviationActivity
property in object HybridShapeSweepConic
Returns or sets information whether a deviation from guide curves is allowed or not.
GuideDeviationActivity
property in object HybridShapeSweepCircle
Returns or sets information whether a deviation from guide curves is allowed or not.
GuideDeviationActivity
property in object HybridShapeSweepExplicit
Returns or sets information whether a deviation from guide curves is allowed or not.
GuideProjection
property in object HybridShapeSweepExplicit
Returns or sets the projection of the guide curve onto the reference plane in order to use it as spine, in pulling direction case only.
getTuple
method in object ExpertReportObject
Returns a tuple (a collection of objects) concerned by this report object.
getTupleSize
method in object ExpertReportObject
Returns the size of the tuple concerned by this report object.
HOST
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the host name field.
HSOSynchronized
property in object Application
For selection performance purposes, returns or sets the HSO synchronization in comparison with the CSO.
HTSActivityGroupMotionBasis
enum
HTSBodyPoseOptions
enum
HTSEndEffector
enum
HTSHand
enum
HTSManikinReferential
enum
HTSMotionBasis
enum
HTSPickType
enum
HTSSearchIntensity
enum
HTSStrideOptions
enum
HTSSwingOptions
enum
HTSWalkMotionBasis
enum
HalfDimMode
property in object DrawingDimension
Returns or sets half dimension mode or not.
HaloMode
property in object VisualizationSettingAtt
Returns the HaloMode parameter.
HardwareShadowSmoothing
property in object RenderingLight
Returns or sets the light shadow smoothing.
HardwareShadowStatus
property in object RenderingLight
Returns or sets the light shadow status on environmemt.
HardwareShadowTransparency
property in object RenderingLight
Returns or sets the light shadow transparency.
HasAControledRadius
method in object Annotation
To know if the Annotation has a Controled Radius.
HasAFreeState
method in object Annotation
To know if the Annotation has a Free State.
HasAMasterShapeRepresentation
method in object Scene
Returns whether the product has a master shape representation in the scene.
HasAMasterShapeRepresentation
method in object Product
Returns whether the product has a master shape representation.
HasAMaterialCondition
method in object Annotation
To know if the Annotation has a Material Condition.
HasAParticularTolElem
method in object Annotation
To know if the Annotation has a Particuler Element.
HasATolerancePerUnitBasisRestrictiveValue
method in object Annotation
To know if the Annotation has a Tolerance Per Unit Basis Restricted Value.
HasAccuracyProfile
method in object RobGenericController
Check whether given tool profile exists.
HasAnEnvelopCondition
method in object Annotation
To know if the Annotation has an Envelop Condition.
HasDimensionLimit
method in object Annotation
To know if the Annotation has a Dimension Limit.
HasMotionProfile
method in object RobGenericController
Check whether given Motion profile exists.
HasObjFrameProfile
method in object RobGenericController
Check whether given ObjFrame profile exists.
HasObsoleteClass
method in object SchObsoleteModel
Is there any obsolete class in the application model.
HasPartRelation
method in object WalkActivity
HasPartRelation
method in object MoveToPostureActivity
DEPRECATED.
HasSeedPoint
method in object SchGRRRouteEllipse
Check to see if the Seed point has been set.
HasShapeRepresentation
method in object Product
Returns whether the product has a representation of the given name with a given behavior.
HasToResetModalValues
method in object ManufacturingOutputGenerator
Return the characteristic of an object : Reset or not Modal Values.
HasToolProfile
method in object RobGenericController
Check whether given tool profile exists.
HeadAngle
property in object Hole
Returns the hole head angle.
HeadAngle
property in object AssemblyHole
Returns the hole head angle.
HeadDepth
property in object Hole
Returns the hole head depth.
HeadDepth
property in object AssemblyHole
Returns the hole head depth.
HeadDiameter
property in object Hole
Returns the hole head diameter.
HeadDiameter
property in object AssemblyHole
Returns the hole head diameter.
HeadSymbol
property in object DrawingArrow
Returns or sets symbol type of head side.
HeadSymbol
property in object DrawingLeader
Returns or sets symbol type of head side.
HeadTarget
property in object DrawingArrow
Returns or sets target element of head side.
HeadTarget
property in object DrawingLeader
Returns or sets target element of head side.
Height
property in object Viewer
Returns the viewer's height, in pixels.
Height
property in object Window
Returns or sets the window height.
Height
property in object Application
Returns or sets the height of the application's frame window.
Height
property in object HybridShapeHelix
Reads the height of the Helix.
Height
property in object Section
Returns or sets the height of the section.
Height
property in object RenderingEnvironment
Returns or sets the cubic or cylindrical environment height value.
Height
property in object FunctNodeGraphLayout
Returns the Height coordinate.
Height
property in object ArrangementArea
Returns or sets the Height of an ArrangementArea object.
Height
property in object ArrangementItemReservation
Returns or sets the height of the ArrangementItemReservation.
Heightmax
property in object PCBArea
Heightmin
property in object PCBArea
Help
method in object Application
Displays application's online help.
Help
property in object ExpertCheckRuntime
Returns or sets the contextual help of the check object.
Hidden
property in object SceneProductData
Returns / Set the scene product's hide/show mode.
Hidden
property in object Parameter
Returns or sets wether the parameter is hidden or should be hidden.
Hidden
property in object KnowledgeObject
Returns or sets wether the relation is hidden or should be hidden.
HiddenLineMode
property in object DrawingViewGenerativeBehavior
Returns or sets the view hidden line drawing mode.
Hide
method in object FastenerGroup
Hides all the entities in the fastener group.
HideIn3D
property in object Layout2DSettingAtt
Returns the HideIn3D parameter.
HidePlane
property in object SectioningSettingAtt
Returns or sets the HidePlane parameter.
HideResult
property in object SectioningSettingAtt
Returns or sets the HideResult parameter.
Highlight
method in object ExpertCheckRuntime
Highlights the Failures on the check.
HighlightDefAnnot
property in object FTASettingAtt
Returns or sets the Highlight Def Annot parameter.
HistoryPrint
property in object ABQJob
Sets or returns whether history data are printed.
HoldCurve
property in object HybridShapeFilletBiTangent
Returns or Sets the Hold Curve feature.
Hole
object
Hole Feature in Part Design.
HoleOwner
property in object PCBHoleAndPattern
HoleThreadDescription
property in object Hole
Returns the hole thread description parameter.
HoleType
property in object PCBHoleAndPattern
HomeName
property in object MoveActionActivity
HomeName
property in object MoveHomeAct
HomePosition
object
Interface representing a device's Home Position.
HorizontalReference
property in object Axis2D
Returns the 2D coordinate system horizontal axis.
HtsCCPSettingAtt
object
HtsGeneralSettingAtt
object
HtsJointSpeedSettingsAtt
object
Interface representing xxx.
HtsTaskDisplaySettingAtt
object
HumanActivityGroup
object
Interface representing xxx.
HumanActivityGroupFactory
object
The object that represents the Human Activity Group Factory.
HumanActsFactory
object
The object that represents the Human Activity Factory.
HumanCallTask
object
Interface representing xxx.
HumanProgram
object
The object that represents program-node of Worker.
HumanTask
object
HumanTask
property in object WorkerActivity
HumanTaskList
object
HybridBodies
object
A collection of the HybridBody objects.
HybridBodies
property in object Part
Returns the collection object containing the hybrid bodies that are direct children of the part.
HybridBodies
property in object Body
Returns the body's HybridBodies collection.
HybridBodies
property in object HybridBody
Returns the hybrid body's HybridBodies collection.
HybridBody
object
The object is a hybrid body.
HybridDesignMode
property in object PartInfrastructureSettingAtt
Returns or sets the "HybridDesignMode" parameter.
HybridShape
object
Represents the hybrid shape object.
HybridShape
property in object Loft
Gets the underlying HybridShapeLoft.
HybridShape
property in object Rotate
Gets the underlying HybridShapeRotate.
HybridShape
property in object Affinity
Gets the underlying HybridShapeAffinity.
HybridShape
property in object Symmetry
Gets the underlying HybridShapeSymmetry.
HybridShape
property in object Translate
Gets the underlying HybridShapeTranslate.
HybridShape
property in object AxisToAxis
Gets the underlying HybridShapeAxisToAxis.
HybridShape3DCurveOffset
object
Represents the hybrid shape 3DCurve Offset operation feature.
HybridShapeAffinity
object
Represents the hybrid shape affinity feature object.
HybridShapeAssemble
object
Represents the hybrid shape assemble feature object.
HybridShapeAxisLine
object
Represents the hybrid shape axis line feature object.
HybridShapeAxisToAxis
object
Represents the hybrid shape axis to axis tranformation feature object.
HybridShapeBlend
object
Represents the hybrid shape blended surface object.
HybridShapeBoundary
object
Represents the hybrid shape boundary feature object.
HybridShapeBump
object
The Bump feature : an Bump is made up of a body to process and some Bump parameters.
HybridShapeCircle
object
Represents the hybrid shape circle object.
HybridShapeCircle2PointsRad
object
Represents the hybrid shape circle object defined using two points and a radius.
HybridShapeCircle3Points
object
Represents the hybrid shape circle object defined using three points.
HybridShapeCircleBitangentPoint
object
Represents the hybrid shape circle object defined using a point and tangent to two curves.
HybridShapeCircleBitangentRadius
object
Represents the hybrid shape circle object defined using a radius and tangent to two curves.
HybridShapeCircleCenterAxis
object
Represents the hybrid shape circle object defined using a point and axis/line.
HybridShapeCircleCenterTangent
object
Represents the hybrid shape circle object defined using a center, a curve and a support.
HybridShapeCircleCtrPt
object
Represents the hybrid shape circle object defined using a center and a point on the circle.
HybridShapeCircleCtrRad
object
Represents the hybrid shape circle object defined using a center and a radius.
HybridShapeCircleExplicit
object
Represents the hybrid shape circle object explicitely defined.
HybridShapeCircleTritangent
object
Represents the hybrid shape circle object tangent to three curves.
HybridShapeCombine
object
Represents the hybrid shape combined curve object.
HybridShapeConic
object
Represents the hybrid shape conic object.
HybridShapeConnect
object
Represents the hybrid shape connect curve object.
HybridShapeCorner
object
Represents the hybrid shape corner feature.
HybridShapeCurveExplicit
object
Represents the hybrid shape Curve explicit feature object.
HybridShapeCurvePar
object
Represents the hybrid shape curve parameter object.
HybridShapeCurveSmooth
object
Represents the hybrid shape curve smoothing operation feature.
HybridShapeCylinder
object
Represents the hybrid shape Cylinder feature object.
HybridShapeDevelop
object
Represents the hybrid shape develop feature object.
HybridShapeDirection
object
Represents the hybrid shape direction feature object.
HybridShapeExtract
object
Represents the hybrid shape extract feature object.
HybridShapeExtractMulti
object
Represents the hybrid shape ExtractMulti feature object.
HybridShapeExtrapol
object
Represents the hybrid shape extrapolation feature object.
HybridShapeExtremum
object
Represents the hybrid shape extremum feature object.
HybridShapeExtremumPolar
object
Represents the hybrid shape extremum polar feature.
HybridShapeExtrude
object
The Extrude feature : an Extrude is made up of a face to process and one Extrude parameter.
HybridShapeFactory
object
Interface to create all kinds of HybridShape objects that may be needed in wireframe and surface design.
HybridShapeFactory
property in object Part
Returns the part hybrid shape factory.
HybridShapeFill
object
The Fill feature : an Fill is made up of a face to process and one Fill parameter.
HybridShapeFilletBiTangent
object
Fillet Bi-Tangent feature.
HybridShapeFilletTriTangent
object
Fillet Tri-Tangent feature.
HybridShapeHealing
object
Represents the hybrid shape healing feature object.
HybridShapeHelix
object
Represents the hybrid shape helix feature object.
HybridShapeInstance
object
The interface to access a CATIAHybridShapeInstance.
HybridShapeIntegratedLaw
object
Represents the hybrid shape "integrated" law feature object.
HybridShapeIntersection
object
Represents the hybrid shape intersection feature object.
HybridShapeInverse
object
The Inverse feature : an Inverse is made up of a face to process and one Inverse parameter.
HybridShapeLawDistProj
object
Interface to law feature.
HybridShapeLineAngle
object
Line defined from a reference curve, a plane or a surface, a point and an angle.
HybridShapeLineBiTangent
object
Line tangent to a curve.
HybridShapeLineBisecting
object
Represents the hybrid shape bisecting line feature object.
HybridShapeLineExplicit
object
Represents the hybrid shape line explicit feature object.
HybridShapeLineNormal
object
Line defined by a point and a direction normal to a surface.
HybridShapeLinePtDir
object
Line defined by a point and a direction.
HybridShapeLinePtPt
object
Represents the hybrid shape line between two points feature object.
HybridShapeLineTangency
object
Line tangent to a curve.
HybridShapeLoft
object
Represents the hybrid shape loft surface feature object.
HybridShapeNear
object
The Near feature : an Near is made up of a face to process and one Near parameter.
HybridShapeOffset
object
Represents the hybrid shape offset feature object.
HybridShapePlane1Curve
object
plane through a curve.
HybridShapePlane1Line1Pt
object
Represents plane feature defined by a line and a point.
HybridShapePlane2Lines
object
plane defined by two lines.
HybridShapePlane3Points
object
Represents the hybrid shape plane through three points feature object.
HybridShapePlaneAngle
object
Represents the hybrid shape plane angle feature object.
HybridShapePlaneEquation
object
Plane define by an equation plane.
HybridShapePlaneExplicit
object
Represents the hybrid shape Plane explicit feature object.
HybridShapePlaneMean
object
Represents the hybrid shape mean plane feature object.
HybridShapePlaneNormal
object
Normal plane.
HybridShapePlaneOffset
object
Offset plane.
HybridShapePlaneOffsetPt
object
Offset plane with point reference.
HybridShapePlaneTangent
object
Tangency plane.
HybridShapePointBetween
object
Represents the hybrid shape PointBetween feature object.
HybridShapePointCenter
object
Represents the hybrid shape PointCenter feature object.
HybridShapePointCoord
object
Point defined by coordinates.
HybridShapePointExplicit
object
Represents the hybrid shape point explicit feature object.
HybridShapePointOnCurve
object
Represents the hybrid shape point on a curve.
HybridShapePointOnPlane
object
Point on a plane.
HybridShapePointOnSurface
object
Represents the Point on Surface feature objects.
HybridShapePointTangent
object
Point Tangent.
HybridShapePolyline
object
Represents the hybrid shape polyline curve object.
HybridShapePositionTransfo
object
Represents the hybrid shape position transformation feature object.
HybridShapeProject
object
Represents the hybrid shape project feature object.
HybridShapeReflectLine
object
Represents the hybrid shape reflect line feature object.
HybridShapeRevol
object
The Revol feature : an Revol is made up of a face to process and one Revol parameter.
HybridShapeRotate
object
Represents the hybrid shape rotate feature object.
HybridShapeScaling
object
Represents the hybrid shape scaling feature object.
HybridShapeSection
object
Interface to hybrid shape section feature.
HybridShapeSphere
object
Represents the hybrid shape sphere feature object.
HybridShapeSpine
object
Represents the hybrid spine curve feature object.
HybridShapeSpiral
object
Represents the hybrid shape Spiral feature object.
HybridShapeSpline
object
Represents the hybrid shape spline feature object.
HybridShapeSplit
object
Represents the hybrid shape split feature object.
HybridShapeSurfaceExplicit
object
Represents the hybrid shape Surface explicit feature object.
HybridShapeSweep
object
Represents the hybrid shape Sweep feature object.
HybridShapeSweepCircle
object
Represents the hybrid shape sweep circle feature object.
HybridShapeSweepConic
object
Represents the hybrid shape conic sweep feature.
HybridShapeSweepExplicit
object
Represents the hybrid shape Sweep explicit feature object.
HybridShapeSweepLine
object
Represents the sweep line object.
HybridShapeSymmetry
object
Represents the hybrid shape symmetry feature object.
HybridShapeThickness
object
Represents the hybrid shape Thickness feature object.
HybridShapeTransfer
object
Represents the hybrid shape Transfer feature object.
HybridShapeTranslate
object
Represents the hybrid shape translate feature object.
HybridShapeTrim
object
Represents the hybrid shape trim object.
HybridShapeUnfold
object
Represents the hybrid shape Unfold feature object.
HybridShapeVolumeExplicit
object
Represents the hybrid shape Volume explicit feature object.
HybridShapeWrapCurve
object
Represents the hybrid shape wrap curve surface object.
HybridShapeWrapSurface
object
Represents the hybrid shape wrap surface object.
HybridShapes
object
The collection of the HybridShapes making up a body.
HybridShapes
property in object Body
Returns the list of hybrid shapes included in the body.
HybridShapes
property in object HybridBody
Returns the list of hybrid shapes included in the hybrid body.
HybridShapes
property in object OrderedGeometricalSet
Returns the list of hybrid shapes included in the ordered geometrical set.
HybridSketches
property in object HybridBody
Returns the hybrid body's Sketches collection.
Hyperbola2D
object
Class defining an hyperbola in 2D Space.
Hyperlink
object
Represents a hyperlink marker.
Hyperlinks
object
Hyperlinks
property in object NavigatorWorkbench
Returns the Hyperlinks collection.
height
property in object DrawingPicture
Returns or sets the height of the drawing picture.
IDispatch
object
Base interface for all Automation interfaces.
IKManager
property in object SWKManikin
Returns the inverse kinematics (IK) engine of the current manikin.
IPDTemplateProperty
object
Interface to access template object (being pointed by the given V5 object) properties.
IUnknown
object
Base interface for all interfaces.
IconName
property in object ArrNomenclature
Gets/Sets the Icon Name associated to the Type Name.
IdeasComponentName
property in object MultiCADSettingAtt
IdeasComponentType
property in object MultiCADSettingAtt
IdeasLibraryName
property in object MultiCADSettingAtt
IdeasPartNumber
property in object MultiCADSettingAtt
IdeasProjectName
property in object MultiCADSettingAtt
IdeasRevNumber
property in object MultiCADSettingAtt
IdeasTessParam
property in object MultiCADSettingAtt
IdentificationLineSide
property in object DrawingWelding
Returns or sets the welding identification line Side of the drawing welding symbol.
Identifier
property in object PCBArea
Identifier
property in object SWKIKConstraint
Returns the identifier(ID) of the constraint.
Idi3dAnnotationMode
property in object MultiCADSettingAtt
IgesSettingAtt
object
Represents the CATIA IGES setting controller object.
IgpOlpSettingAtt
object
Represents the Offline Programming setting controller object.
IlluminationStatus
property in object RenderingLight
Changes the indirect illumination status.
ImageHeight
property in object RenderingShooting
Returns or sets the image height for shooting.
ImageOutputDirectory
property in object RenderingShooting
Returns or sets the output directory for image.
ImageOutputFormat
property in object RenderingShooting
Returns or sets the file type used for saved image.
ImageOutputName
property in object RenderingShooting
Returns or sets the output name for image (extension excluded).
ImageOutputType
property in object RenderingShooting
Returns or sets the image output location.
ImagePredefinedRatio
property in object RenderingShooting
Returns or sets the image height for shooting.
ImageQualityMode
property in object AnalysisReportingSettingAtt
Returns or sets the ImageQualityMode parameter.
ImageTextSize
property in object AnalysisPostProSettingAtt
Returns or sets the ImageTextSize parameter.
ImageTextStacking
property in object AnalysisPostProSettingAtt
Returns or sets the ImageTextStacking parameter.
ImageViewMode
property in object DrawingViewGenerativeBehavior
Returns or sets the view generation mode as pixel image.
ImageWidth
property in object RenderingShooting
Returns or sets the image width for shooting.
ImaginaryRadius
property in object Hyperbola2D
ImplicitLawInterpolationMode
property in object HybridShapeIntegratedLaw
Gets or sets Interpolation mode for implicit law.
ImpliedResourceFilter
property in object VerifTabSettingAtt
Import
method in object AnalysisManager
Import an existing document in an analysis document .
Import
method in object ExpertRuleBaseRuntime
Import from RuleSet.
ImportAnnotation
property in object ImportD5SettingAtt
Returns or sets the ImportAnnotation parameter.
ImportBaseFrm
property in object ImportD5SettingAtt
Returns or sets the ImportBaseFrm parameter.
ImportCollision
property in object ImportD5SettingAtt
Returns or sets the ImportCollision parameter.
ImportConfigFile
property in object ImportD5SettingAtt
Returns or sets the ImportConfigFile parameter.
ImportCoorsys
property in object ImportD5SettingAtt
Returns or sets the ImportCoorsys parameter.
ImportCreaseAngle
property in object VrmlSettingAtt
Returns or sets the ImportCreaseAngle parameter.
ImportD5SettingAtt
object
Interface to handle parameters of General-Compatibility-DELMIA D5 Tools Options Tab page.
ImportDefineFile
method in object AnalysisManager
Import an existing document in an analysis document.
ImportDisp
method in object AnalysisImport
Import displacements from a CATAnalysisExport file.
ImportEdge
property in object ImportD5SettingAtt
Returns or sets the ImportEdge parameter.
ImportFile
method in object AnalysisManager
Import an existing document in an analysis document.
ImportFloor
property in object ImportD5SettingAtt
Returns or sets the ImportFloor parameter.
ImportForce
method in object AnalysisImport
Import loads from a CATAnalysisExport file.
ImportFromFile
method in object ExpertRuleBaseRuntime
Import from file.
ImportGroupAsSelSet
property in object IgesSettingAtt
Returns or sets the Import Selection Set mode setting parameter value.
ImportLibrary
property in object ImportD5SettingAtt
Returns or sets the ImportLibrary parameter.
ImportPDBCache
property in object ImportD5SettingAtt
Returns or sets the ImportPDBCache parameter.
ImportRecording
property in object ImportD5SettingAtt
Returns or sets the ImportRecording parameter.
ImportToolFrm
property in object ImportD5SettingAtt
Returns or sets the ImportToolFrm parameter.
ImportUnit
property in object VrmlSettingAtt
Returns or sets the ImportUnit parameter (unit of imported Vrml files).
ImportUserAttr
property in object ImportD5SettingAtt
Returns or sets the ImportUserAttr parameter.
ImportUserViews
property in object ImportD5SettingAtt
Returns or sets the ImportUserViews parameter.
ImportWclMessage
property in object ImportD5SettingAtt
Returns or sets the ImportWclMessage parameter.
ImportWclPath
property in object ImportD5SettingAtt
Returns or sets the ImportWclPath parameter.
ImportWithLink
method in object ExpertRuleBaseRuntime
Import with link to a document.
ImposedVertexRadius
method in object VarRadEdgeFillet
Returns the fillet radius on an imposed vertex.
ImposedVertices
property in object VarRadEdgeFillet
Returns the collection of vertices where a radius has been imposed.
InBooleanOperation
property in object Body
Returns True if the body is involved in a boolean operation, else returns False.
InProcessModelBodiesCount
method in object ManufacturingSetup
Returns the number of In Process Model Bodies from a Manufacturing Setup.
InWorkObject
property in object Part
Returns or sets the in work object of the part.
Inactivate
method in object Part
Suppresses an object from being updated.
InactivityDuration
property in object DisconnectionSettingAtt
Returns or sets the inactivity duration.
IncludeShellThickness
property in object ABQFastenedPair
Sets or returns the include shell element thickness flag.
IncludeShellThickness
property in object ABQFastenedConnectionEnhancement
Sets or returns the include shell element thickness flag.
IncrementTabulation
method in object ManufacturingOutput
Increment the tabulation of the current block of text by the specified number of characters.
Incrementation_Type
enum
Step incrementation methods.
Indicate2D
method in object Document
Runs an 2D interactive indication command.
Indicate3D
method in object Document
Runs an 3D interactive indication command.
IndicateOrSelectElement2D
method in object Selection
Runs an interactive command enabling both indication and selection, 2D version.
IndicateOrSelectElement3D
method in object Selection
Runs an interactive command enabling both indication and selection, 3D version.
Inertia
object
Represents the Inertia object.
Inertias
object
A collection of all inertia objects currently managed by the application.
Inertias
property in object SPAWorkbench
Returns the Inertias collection.
InfRange
property in object FreeParameter
Returns or sets the inferior bound of the free parameter object.
InheritanceMode
property in object PositionedMaterial
Returns or sets the inheritance mode of an applied material.
Init
method in object FunctionalFacet
Init resources for the Facet.
InitFileGenerator
method in object ManufacturingOutputGenerator
Init the Output Generator on the current Object and initialise all datas.
InitStatus
property in object TCPTraceManager
Indicates whether the tracing capability must delete previous traces when the simulation starts.
InitialDirectionComputationMode
property in object HybridShapePositionTransfo
Gets or sets the computation mode of the X axis (or direction) of the initial axis system.
InitialElement
property in object HybridShapeBoundary
Returns or sets the element used to initialize the boundary propagation.
InitialGap
property in object ABQGasketProperty
InitialInc
property in object ABQHeatTransferStep
ets or returns the initial increment size.
InitialInc
property in object ABQGeneralStaticStep
eturns or sets the size of the initial increment.
InitialThickness
property in object ABQGasketProperty
InitialThicknessType
property in object ABQGasketProperty
InitialThickness_Type
enum
Stabilization initial thickness.
InitialVoid
property in object ABQGasketProperty
Initial_Model_File_Path
property in object V4WritingSettingAtt
Returns or sets the initial model file path.
Initialization
method in object PspApplication
Initializes the application environment (load feature start up objects, activate the application.
Input
property in object StrMemberExtremity
Returns or sets the input object defining the extremity.
InputFileFormat
property in object ABQJob
Sets or returns the format of the input file generated by the job.
InputProducts
property in object Resource
InputSupport
property in object StrMember
Retrieves the input support.
InputsCount
property in object ShapeInstance
Returns the number of Inputs.
InputsCount
property in object HybridShapeInstance
Returns the number of Inputs.
Insert
method in object ABQSteps
Creates a new Abaqus Step and inserts it to the collection of Abaqus steps.
Insert
property in object ManufacturingToolAssembly
Returns the insert of an assembly.
InsertActivity
method in object MachiningProcess
This method creates and inserts a Manufacturing Activity in the Machining Process.
InsertAfter
method in object Shots
Adds a shot to a specific location to the shots collection.
InsertAfter
method in object DrawingTextRange
Inserts a character string at the end of the drawing text range.
InsertAt
method in object AMPPath
Function to insert an AMPTag at a given index of the AMPPath.
InsertBefore
method in object DrawingTextRange
Inserts a character string at the beginning of the drawing text range.
InsertBoundAfterPosition
method in object HybridShapeFill
Inserts the boundary after specified position in the Fill.
InsertControlPointAfter
method in object Spline2D
Inserts control points in the spline.
InsertCoupling
method in object HybridShapeLoft
Inserts a coupling to the loft.
InsertCoupling
method in object HybridShapeBlend
Inserts a coupling into the blend.
InsertCouplingPoint
method in object HybridShapeLoft
Inserts a coupling point to a coupling of the lofted surface.
InsertCouplingPoint
method in object HybridShapeBlend
Inserts a coupling point to a coupling of the blend.
InsertCurves
method in object HybridShapeWrapCurve
Inserts a couple of reference curve and target curve to the wrap curve.
InsertDraftAngleDefinitionLocation
method in object HybridShapeSweepLine
Inserts a geometrical element and a value necessary for draft angle definition after a given position in the lists.
InsertElement
method in object HybridShapePolyline
Inserts the element at a specified position in the polyline.
InsertHybridShape
method in object Body
Insert a hybrid shape to the body.
InsertHybridShape
method in object OrderedGeometricalSet
Inserts a hybrid shape to the ordered geometrical set.
InsertIntoRouteWithInfo
method in object SchComponent
Insert a component into a route.
InsertLevel
property in object N4DNavigatorSettingAtt
Returns or sets the level for the Import Applicative Data command (True : at highest review level, False : in current review).
InsertMode
property in object N4DNavigatorSettingAtt
Returns or sets the mode for the Import Applicative Data command (CatSacSettingsEnumNoInsert no import of applicative data, CatSacSettingsEnumAutomatic the import of applicative is automatic, CatSacSettingsEnumUserPrompt the user can select the applicative data to import).
InsertOperation
method in object ManufacturingProgram
Insert an existing Manufacturing Operation to a Manufacturing Program.
InsertReferenceCurve
method in object HybridShapeWrapCurve
Inserts a of reference curve to the wrap curve.
InsertSectionToLoft
method in object HybridShapeLoft
Inserts a loft section.
InsertToolMotion
method in object ManufacturingOperation
Create, given its type, a Manufacturing ToolMotion inside a sequential operation.
InsertType
property in object ManufacturingInsert
Return the technological type of a the insert.
InsertVariable
method in object DrawingText
Sets a Parameter in a string of the drawing text.
InsertViewAngle
method in object DrawingView
Insert the Angle parameter in the text of the drawing text.
InsertViewScale
method in object DrawingView
Insert the scale parameter in the text of the drawing text.
InsertionLevel
property in object MachiningProcess
This property defines the insertion level in the program receiving the resulting operations.
InstanceCount
property in object DimensionPattern
Get count of instances.
InstanceFactory
object
Represents the CATIAInstanceFactory.
InstanceName
method in object ArrBendableString
Returns the Bendable's Instance Name.
InstanceSpacing
property in object AngularRepartition
Returns the angle at which the pattern spacing is done for unequal angular spacing mode.
InstancesCount
property in object Repartition
Returns the total number of copied shapes.
InstanciateNOA
method in object AnnotationFactory
Instanciate an NOA from a Reference NOA.
Instantiate
method in object InstanceFactory
Instantiates the reference in the current document.
Instantiate
method in object MachiningProcess
This method enables to apply a Machining Process to an any feature.
InstantiateInProductContext
method in object MachiningProcess
This method enables to apply a Machining Process to a given feature by taking into account the product from which it belongs to.
IntParam
object
Represents the integer parameter.
IntSysClassName
property in object ArrNomenclature
Gets/Sets the internal class names for System nomenclatures.
IntegratedLaw
property in object HybridShapeFilletBiTangent
Gets or sets Integrated Law to manage Variable Shape Fillet with law.
IntegrationType
property in object StiEngine
Returns the Engine Integration Type.
Intensity
property in object RenderingLight
Returns or sets the light intensity of a light.
InteractionProperty
property in object ABQSurfaceToSurfaceContact
Sets or returns the interaction property in a contact pair.
Interactions
property in object ABQStep
Returns the ABQInteractions container associated with the step.
Interactive
property in object Application
Returns or sets the application sensitivity to end user interactions.
InterferenceFit
property in object ABQSurfaceToSurfaceContact
Assigns / gets interference fit of a contact pair.
InterferenceFitAmplitude
property in object ABQSurfaceToSurfaceContact
Assigns / gets interference fit amplitude of a contact pair.
InterferenceType
property in object Clash
Returns or sets the interference type for the computation.
InternalMaxDeformation
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of mode with internal deformation (Curve Improvement).
InternalThickness
property in object Shell
Returns the shell internal thickness.
InternalTypeDeformation
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of type for internal deformation (Curve Improvement).
InteropSettingAtt
object
Represents the object to handle the setting parameters of the "V4 Data Reading" tab page.
Interpolater
property in object Sampled
Retrieves/sets the sampled's interpolater.
Intersect
object
Represents the intersect boolean operation.
IntersectMode
property in object HybridShapeIntersection
Returns or sets the IntersectMode flag for intersect.
IntersectionComputation
property in object HybridShapeTrim
Gets or sets Intersection computation mode.
IntersectionComputation
property in object HybridShapeSplit
Gets or sets Intersection computation mode.
InverseOrientation
method in object Sketch
Invert
property in object HybridShapeAssemble
Returns or sets the invert mode.
InvertAxis
property in object HybridShapeHelix
Reads / Modifies the orientation .
InvertAxis
property in object HybridShapeSpiral
Reads / Modifies the orientation .
InvertDirection
method in object HybridShapeSpline
Inverts the orientation of the tangent direction .
InvertDirection
property in object HybridShapeCurvePar
Returns or sets the orientation.
InvertDirection
method in object FunctionalAction
Invert the action's Direction.
InvertDirection
property in object HybridShape3DCurveOffset
Returns or sets the direction orientation.
InvertFirstOrientation
method in object HybridShapeTrim
InvertFirstOrientation
method in object HybridShapeCorner
Inverts the first reference element orientation used to compute the corner.
InvertFirstOrientation
method in object HybridShapeFilletBiTangent
Inverts first orientation used to specify fillet center position.
InvertFirstOrientation
method in object HybridShapeFilletTriTangent
Inverts first orientation used to specify fillet center position.
InvertMappingLaw
property in object HybridShapeCurvePar
Returns or sets the mapping orientation of the law (if offset is specified by a law).
InvertMappingLaw
property in object HybridShapeIntegratedLaw
Gets or sets the mapping orientation of the law.
InvertMasterSurface
property in object ABQFastenedPair
Sets or returns the invert master surface flag.
InvertMasterSurface
property in object ABQFastenedConnectionEnhancement
Sets or returns the invert master surface flag.
InvertMode
method in object DrawingTable
Sets a mode of table inversion.
InvertOrientation
method in object HybridShapeSplit
Inverts the orientation used to compute the split.
InvertOrientation
method in object HybridShapeCylinder
Inverts the Orientation of Cylinder object.
InvertOrientationDirection
method in object HybridShapeReflectLine
Inverts the orientation of direction.
InvertOrientationSupport
method in object HybridShapeReflectLine
Inverts the orientation of support.
InvertRemoveOrientation
method in object HybridShapeFilletTriTangent
Inverts third orientation used to specify fillet center position.
InvertSecondOrientation
method in object HybridShapeTrim
InvertSecondOrientation
method in object HybridShapeCorner
Inverts the second reference element orientation used to compute the corner.
InvertSecondOrientation
method in object HybridShapeFilletBiTangent
Inverts second orientation used to specify fillet center position.
InvertSecondOrientation
method in object HybridShapeFilletTriTangent
Inverts second orientation used to specify fillet center position.
InvertSlaveSurface
property in object ABQFastenedPair
Sets or returns the invert slave surface flag.
InvertSlaveSurface
property in object ABQFastenedConnectionEnhancement
Sets or returns the invert slave surface flag.
IsACompositeTolerance
method in object Annotation
To know if the Annotation is a composite Tolerance.
IsADefaultAnnotation
method in object Annotation
To know if the Annotation is a Default Annotation.
IsADimensionPattern
method in object Annotation
To know if the Annotation is a Dimension Pattern.
IsAProjectedToleranceZone
method in object Annotation
To know if the Annotation is a Projected Zone.
IsARefPlane
method in object Plane
Queries whether the plane is a reference plane (fixed axis plane).
IsAReference
method in object SchComponent
Query whether the component is a reference (as opposed to an instance).
IsAShiftedProfileTolerance
method in object Annotation
To know if the Annotation is a Shifted Profile Tolerance.
IsATangentPlane
method in object Annotation
To know if the Annotation is a Tangent Plane.
IsAToleranceUnitBasisValue
method in object Annotation
To know if the Annotation is a Tolerance Unit Basis Value.
IsAToleranceZone
method in object Annotation
Is the a Tolerance Zone.
IsAnAssociatedRefFrame
method in object Annotation
To know if the Annotation is an Associated Reference Frame.
IsArrowShown
method in object SchArrowDisplay
Query whether flow arrows are shown (arrow attributes exist).
IsAssemble
method in object HybridShapeExtrapol
Retrieves whether extrapolation is assembled with extrapolated curve or surface.
IsBoundaryValid
method in object SchGRRZone
Check whether the boundary of this zone graphical representation is valid.
IsCFOType
method in object StiDBItem
Returns if the CATIA Document -associated to the CATIAStiDBItem- is a Component File or not.
IsChildMA
method in object DNBAttachment
IsClipped
property in object DrawingDimension
Returns the clipping status of the dimension.
IsCntrConnected
method in object PspConnector
Query whether the connector has been connected.
IsConnected
method in object StiEngine
Returns if end user Is Connected to SmarTeam Integration (True) or not (False).
IsConst
property in object KnowledgeObject
Returns or sets wether the relation is Const or should be Const.
IsContourClosed
method in object ManufacturingPrismaticMachiningArea
Return the status of one contour of a Manufacturing Prismatic Machining Area : closed or open.
IsCurrent
property in object AxisSystem
Returns True if the axis system is the current one, else returns False.
IsDefined
property in object Distance
Returns a diagnosis on the distance.
IsDerived
method in object PspAttribute
Retrieve Derived status for the input attribute.
IsDetail
method in object DrawingSheet
Checks whether the sheet is a detail sheet.
IsDetail
method in object Layout2DSheet
Checks whether the sheet is a detail sheet.
IsDeviceMounted
method in object MountManager
Checks if the device is mounted or not on a robot.
IsDiscrete
method in object PspAttribute
Query whether the input attribute is discrete or not.
IsEmpty
method in object Section
Indicates whether the section is empty.
IsEqualTo
method in object RealParam
Tests the equality of the parameter value with a given value.
IsFederated
property in object HybridShapeExtract
Returns or sets the IsFederated flag checked/unchecked for the extract.
IsFromTop
property in object Stiffener
Returns or sets whether the stiffener is From Side or From Top.
IsGapShown
method in object SchGapDisplay
Query whether gaps are shown (gap attributes exist).
IsGenerative
method in object DrawingView
Returns whether the drawing view has a generative behavior.
IsGeodesic
method in object HybridShapeCircleCtrPt
Queries whether the circle is geodesic or not.
IsGeodesic
method in object HybridShapeCircleCtrRad
Queries whether the circle is geodesic or not.
IsGeodesic
method in object HybridShapeCircle2PointsRad
Queries whether the circle is geodesic or not.
IsGeometricallyAccessibleOnSetup
method in object ManufacturingOperation
Returns True if the Manufacturing Axial Operation is geometrically accessible on the given Manufacturing Setup.
IsHeterogeneousLaw
method in object HybridShapeLawDistProj
Queries whether Heterogeneous Law mode is active or not.
IsIDGenerated
method in object PspID
Checks if the ID on the object is generated( based on the ID Schema).
IsInAutomaticSearchMode
method in object DefaultAnnotation
Get the type of search algo Return E_FAIL if the annotation is not a default one.
IsInactive
method in object Part
Indicates whether an object is deactivated.
IsInactive
method in object Constraint
Indicates whether a constraint is suppressed from the update process.
IsInserted
method in object SchComponent
Query whether the component is inserted into a route.
IsLinkedTo
method in object DrawingThread
Specifies which kind of objects the thread is linked to.
IsModal
method in object ManufacturingOutputGenerator
Return the characteristic of an object : Modal or Not Modal.
IsOKToIntegrate
method in object PspFunctional
Check it is OK to integrate (realize) this function with a physical part.
IsParentMA
method in object DNBAttachment
IsPeriodic
method in object Curve2D
Specifies whether a curve is periodic or not.
IsProductAuthorized
method in object SystemConfiguration
Returns True if the specified product is authorized, False otherwise.
IsRealized
method in object PspFunctional
Checks if the Function object is realized or not.
IsRoot
method in object StiDBItem
Returns if the CATIA Document -associated to the CATIAStiDBItem- is a Root .
IsSimilarTo
method in object ManufacturingOutputGenerator
Implement a method to specify if two objects are same (when Modal Mode).
IsSketchAxisUsedAsDefault
method in object HybridShapeSweepExplicit
Queries status wherere Sketch axis used as default or not.
IsSpaceReserved
property in object ElecSchematicObject
IsSpecDriven
method in object PspFunctional
Checks if the functional object is specification driven or not.
IsStopDialog
method in object SetOfEquation
Returns whether the "Stop Dialog" will be shown during calculations.
IsSubTypeOf
method in object Activity
This method allows to test the type of a specific activity.
IsSuccess
property in object SWKIKConstraint
Returns whether the resolution of this constraint is a success or a failure, given the current criteria.
IsSymmetric
property in object Prism
Returns the prism symmetry flag.
IsSymmetric
property in object Stiffener
Returns or sets whether the stiffener is symmetric.
IsSymmetric
property in object AssemblyPocket
Returns or sets the pocket symmetry flag.
IsSystemNomenclature
method in object ArrNomenclature
Returns TRUE if the nomenclature happens to be a system nomenclature.
IsTargetOKForInsert
method in object SchCompatible
Query whether an object is compatible to be inserted into a route This method is used when placing a component.
IsTargetOKForPlace
method in object SchCompatible
Query whether an object is compatible to be connected to another component This method is used when placing a component.
IsTargetOKForRoute
method in object SchCompatible
Query whether an object is compatible to be connected to a route.
IsThin
property in object Sweep
Returns the Sweep thin flag.
IsThin
property in object Prism
Returns the prism thin flag.
IsThin
property in object Revolution
Returns the Revol thin flag.
IsTrueParameter
property in object Parameter
Returns a boolean saying if the parameter is a true one (real, dimension, string, etc.
IsUpToDate
method in object Part
Indicates whether an object needs to be updated.
IsUseOnly
method in object ExpertRuleBaseComponentRuntime
Retrieves the use-only status of the component.
Isactivate
method in object ExpertRuleBaseComponentRuntime
Tells if the RuleBaseComponent is active.
IslandsCount
property in object ManufacturingPrismaticMachiningArea
Retreives the number of Island of a Manufacturing Prismatic Machining Area.
Isolate
method in object DrawingView
Isolates the drawing view.
Isolate
method in object DrawingRoot
Isolates all the drawing views of all the drawing sheets of the drawing document.
Isolate
method in object DrawingSheet
Isolates the drawing sheet.
Isolate
method in object DrawingDocument
Isolates all the drawing views of all the drawing sheets of the drawing document.
IsoparGenerationMode
property in object VisualizationSettingAtt
Returns the IsoparGenerationMode parameter.
IssueRepositoryPath
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the IssueRepositoryPath attribute.
Italic
property in object DrawingTextProperties
Returns or sets the drawing text font italic property.
Item
object
The object that represents an item.
Item
method in object Files
Returns a file using its index or its name from the file collection.
Item
method in object Cameras
Returns a camera using its index or its name from the Cameras collection.
Item
method in object Folders
Returns a folder using its index or its name from the folder collection.
Item
method in object Viewers
Returns a viewer using its index from the Viewers collection.
Item
method in object Windows
Returns a window using its index or its name from the Windows collection.
Item
method in object Printers
Returns a printer using its index or its device name from the Printers collection.
Item
method in object Items
This method returns the idl object Item for the specified item identifier.
Item
method in object Selection
Item
method in object Documents
Returns a document using its index or its name from the documents collection.
Item
method in object References
Returns a reference using its index or its name from the References collection.
Item
method in object Outputs
This method can be used to get the associated output product.
Item
method in object PPRProducts
Retrieves the Product corresponding to the specified index in the list of Products.
Item
method in object Bodies
Returns a body using its index or its name from the Bodies collection.
Item
method in object Shapes
Returns a shape using its index or its name from the Shapes collection.
Item
method in object ABQJobs
Item
method in object Resources
This method returns the idl object Resource for the specified resource identifier.
Item
method in object TPSViews
Retrieve a TPS View.
Item
method in object LightSources
Returns a light source from its index in the LightSources collection.
Item
method in object ABQLoads
Item
method in object Captures
Retrieve a Capture.
Item
method in object Shots
Returns a shot using its index from the colection.
Item
method in object ABQSteps
Item
method in object Sketches
Returns a sketch using its index or its name from the Sketches collection.
Item
method in object Activities
This method gets the specified activity on the current activities management.
Item
method in object ABQFields
Item
method in object Materials
Returns a material from its index in the Material collection.
Item
method in object ProductScenes
Returns a scene using its index or its name from the ProductScenes collection.
Item
method in object DraftDomains
Returns a draft domain using its index or its name from the DraftDomains collection.
Item
method in object Sampleds
Returns a CATIASampled object using its index from the CATIASampled collection.
Item
method in object Shuttles
Item
method in object MfgAssembly
Returns one assigned Part (Product, Resource or other MA/MK) of the Manufacturing Assembly.
Item
method in object Annotations
Retrieve an Annotation.
Item
method in object List
Retrieves a Feature using its index or its name from the Features collection.
Item
method in object AxisSystems
Returns an Axis System using its index or its name from the AxisSystems collection.
Item
method in object Constraints
Returns a constraint using its index or its name from the Constraints collection.
Item
method in object Units
Returns a unit using its index or its name from the from the Parameters collection.
Item
method in object UserSurfaces
Find a user surface inside the collection.
Item
method in object HybridBodies
Returns a body using its index or its name from the Bodies collection.
Item
method in object HybridShapes
Returns a HybridShape using its index or its name from the HybridShapes collection.
Item
method in object FixTogethers
Returns a FixTogether using its index or its name from the FixTogethers collection.
Item
method in object Groups
Returns a group using its index or its name from the Groups collection.
Item
method in object ABQProperties
Item
method in object Marker2Ds
Returns a marker 2D using its index from the Marker2Ds collection.
Item
method in object Marker3Ds
Returns a marker 3D using its index from the Marker3Ds collection.
Item
method in object Joints
Returns a Joint using its index or its name from the Joints collection.
Item
method in object Relations
Retrieves a relation using its index or its name from the Relations collection.
Item
method in object StrPlates
Returns a plate from its index in the Plates collection.
Item
method in object AnnotationSets
Retrieve a set.
Item
method in object Parameters
Retrieves a parameter using its index or its name from the from the Parameters collection.
Item
method in object StrMembers
Returns a member from its index in the Members collection.
Item
method in object Hyperlinks
Returns an Hyperlink using its index from the Hyperlinks collection.
Item
method in object DrawingViews
Returns a drawing view using its index or its name from the DrawingViews collection.
Item
method in object Dressups
Returns a Dressup using its index or its name from the Dressups collection.
Item
method in object DrawingTexts
Returns a drawing text using its index from the DrawingTexts collection.
Item
method in object ABQMassScalings
Item
method in object RenderingLights
Returns a rendering light index in the rendering light collection.
Item
method in object ABQInteractions
Item
method in object DrawingTables
Returns a drawing table using its index from the DrawingTables collection.
Item
method in object DrawingSheets
Returns a drawing sheet using its index or its name from the DrawingSheets collection.
Item
method in object DrawingArrows
Returns a drawing arrow using its index from the DrawingArrows collection.
Item
method in object SettingControllers
Returns a setting controller using its name from the setting controllers collection.
Item
method in object Mechanisms
Returns a Mechanism using its index or its name from the Mechanisms collection.
Item
method in object MaterialFamilies
Returns a material family from its index in the MaterialFamilies collection.
Item
method in object ABQAnalysisCases
Item
method in object DrawingLeaders
Returns a drawing leader using its index from the DrawingLeaders collection.
Item
method in object DrawingThreads
Returns a drawing thread using its index from the DrawingThreads collection.
Item
method in object Behaviors
Returns a Behavior using its index or its name from the Behaviors collection.
Item
method in object ParameterSets
Returns a parameter set using its index or its name from the ParameterSets collection.
Item
method in object Optimizations
Retrieves an optimization using its index or its name from the Optimizations collection.
Item
method in object GeometricElements
Returns a geometric element using its index or its name from the GeometricElements collection.
Item
method in object ResourceCollection
This method gets the specified resource from the given resource collection management.
Item
method in object DrawingWeldings
Returns a drawing welding using its index from the drawing weldings collection.
Item
method in object DrawingPictures
Returns a drawing picture using its index or its name from the DrawingPictures collection.
Item
method in object FreeParameters
Retrieves an optimization using its index or its name from the Free Parameters collection.
Item
method in object AnnotatedViews
Returns an annotated view using its index or its name from the AnnotatedViews collection.
Item
method in object StrFoundations
Returns a Foundation from its index in the Foundations collection.
Item
method in object Layout2DViews
Returns a Layout2D view using its index or its name from the Layout2DViews collection.
Item
method in object Clashes
Returns a Clash object using its index or its name from the Clashes collection.
Item
method in object RenderingShootings
Returns a renderingshooting index in the renderingshootings collection.
Item
method in object AnalysisSets
Returns an analysis set using its index or its name from the analysis sets collection.
Item
method in object StrAnchorPoints
Returns an anchor point from its index in the anchor points collection.
Item
method in object Inertias
Returns an Inertia object using its index or its name from the Inertias collection.
Item
method in object Sections
Returns a Section object using its index or its name from the Sections collection.
Item
method in object HumanTaskList
Item
method in object Layout2DSheets
Returns a Layout sheet using its index or its name from the Layout2DSheets collection.
Item
method in object AnalysisCases
Returns a case using its index or its name from the case collection.
Item
method in object Distances
Returns a Distance object using its index or its name from the Distances collection.
Item
method in object Conflicts
Returns a Conflict object using its index from the Conflicts collection.
Item
method in object DrawingDimensions
Returns a drawing dimension using its index or its name from the DrawingDimensions collection.
Item
method in object DrawingComponents
Returns a drawing component instance using its index or its name from the DrawingComponents collection.
Item
method in object AnalysisImages
Returns an analysis image using its index or its name from the analysis images collection.
Item
method in object AnalysisModels
Returns an analysis model using its index or its name from the analysis model collection.
Item
method in object PspListOfBSTRs
Returns a character string from its index in the list.
Item
method in object PspListOfLongs
Returns a long integer from its index in the list.
Item
method in object BasicComponents
Returns an Basic Component using its index or its name from the Basic Components collection.
Item
method in object ClashResults
Returns a ClashResult object using its index or its name from the ClashResults collection.
Item
method in object MechanismCommands
Returns a MechanismCommand using its index or its name from the Commands collection.
Item
method in object AssemblyFeatures
Returns an AssemblyFeature object using its index or its name from the AssemblyFeatures collection.
Item
method in object ABQBoundaryConditions
Item
method in object AnalysisEntities
Returns an analysis entity using its index or its name from the analysis entities collection.
Item
method in object MfgActivities
This method return the specified CATIAManufacturingActivity in the current list CATIAMfgActivities.
Item
method in object RenderingEnvironments
Returns an environment index in the environments collection.
Item
method in object AnalysisSupports
Returns analysis support object information using its index in the collection.
Item
method in object PspListOfObjects
Returns an object from its index in the list.
Item
method in object PspListOfDoubles
Returns a double from its index in the list.
Item
method in object AnalysisMeshParts
Returns a meshpart using its index or its name from the meshpart collection.
Item
method in object OrderedGeometricalSets
Returns a ordered geometrical set using its index or its name from the ordered geometrical set collection.
Item
method in object SchListOfBSTRs
Returns a character string from its index in the list.
Item
method in object Products
Returns a product from its index in the Products collection.
Item
method in object SchListOfLongs
Returns a long integer from its index in the list.
Item
method in object ArrangementRuns
Returns the specified ArrangementRun item of the collection object.
Item
method in object SchListOfObjects
Returns an object from its index in the list.
Item
method in object SchListOfDoubles
Returns a double from its index in the list.
Item
method in object StiDBChildren
Returns the CATIAStiDBItem from its index in the CATIAStiDBChildren.
Item
method in object ArrangementAreas
Returns the specified item of the collection.
Item
method in object ArrangementNodes
Returns the specified ArrangementNode item of the collection.
Item
method in object Publications
Returns the publication object corresponding to the given publication name.
Item
method in object ArrNomenclatures
Item
method in object ExpertReportObjects
Retrieves a Report component using its index or its name from the Check collection.
Item
method in object AnalysisLocalEntities
Returns an analysis entity using its index or its name from the analysis entities collection.
Item
method in object OptimizationConstraints
Returns an optimization constraint using its index or its name from the optimization constraints collection.
Item
method in object AnalysisOutputEntities
Returns an analysis entity using its index or its name from the analysis entities collection.
Item
method in object ArrangementPathways
Returns the specified ArrangementPathway item of the collection object.
Item
method in object ArrangementContours
Returns the specified ArrangementContour item of the collection.
Item
method in object AnalysisLinkedDocuments
Returns a Document by its index or its name from the linked Documents collection.
Item
method in object ManufacturingFeatures
Retrieve the Manufacturing Feature of a the specified index from the Collection.
Item
method in object ArrangementRectangles
Returns the specified ArrangementRectangle item of the collection object.
Item
method in object ArrangementBoundaries
Returns the specified ArrangementBoundary item of the collection.
Item
method in object ManufacturingPrecedences
Returns a precedence object from the precedence collection.
Item
method in object ArrangementItemReservations
Returns the specified ArrangementItemReservation item of the collection.
Item
method in object ExpertRuleBaseComponentRuntimes
Returns a RuleBase component using its index or its name from the entire RuleBase collection.
Item2
method in object Selection
Returns the iIndex-th SelectedElement object contained by the current selection.
ItemAssignmentType
enum
The Analysis Level setting attribute range of values.
ItemByAssignmentType
method in object Items
This method returns the item assocated with the activity with given Assignment Type.
ItemByType
method in object AnalysisSets
Returns an analysis set using its type from the analysis sets collection.
ItemExplicit
method in object Group
Returns a product using its index in the group.
ItemExtract
method in object Group
Returns a product which can be extracted from the group using its index.
ItemInvert
method in object Group
Returns a terminal node product which cannot be extracted from the group using its index.
ItemObject
method in object Marker3D
Returns an object which is linked to the marker 3D using its index.
ItemObject
method in object Hyperlink
Returns an Url which is linked to the Hyperlink using its index.
ItemToCopy
property in object Pattern
Returns or sets the shape to be copied.
Items
object
The collection of items related to the current activity.
Items
property in object Activity
ItemsFilter
property in object TreeTabSettingAtt
ItemsPerRelationFilter
property in object TreeTabSettingAtt
JavaClassPath
property in object IgpOlpSettingAtt
Returns or sets value of OLP Java Class Path parameter.
JavaClassPath
property in object FASReportingSettingAtt
Gets value of "Java Class Path" parameter.
JavaExe
property in object IgpOlpSettingAtt
Returns or sets value of OLP Java Executable parameter.
JavaExe
property in object FASReportingSettingAtt
Gets value of "Java Executable" parameter.
Job
property in object ABQTemperature
Sets or returns the Abaqus job associated with this temperature field.
Job_Type
enum
Job types.
Jobs
property in object ABQAnalysisCase
Returns the Abaqus jobs associated with this analysis case.
Joint
object
Interface to manage the Joint object.
JointValues
property in object MoveActionActivity
This property returns and sets the joint values for the Move activity.
JointValues
property in object MoveJointsAct
This property returns and sets the joint values for the activity.
Joints
object
A collection of all Joint entities currently managed by the application.
Joints
property in object Mechanism
Returns the collection of joints in the mechanism.
Justification
property in object DrawingTextProperties
Returns or sets the drawing text font justification property.
Justification
property in object ExpertCheckRuntime
Returns or sets the reason why the check was overridden.
KeepBothSides
property in object HybridShapeCurvePar
Returns or sets the both sides mode of the curve parameter object.
KeepDirectory
method in object SendToService
Controls the directory tree structure in the target directory.
KeepFace
property in object RemoveFace
Adds a new face to be Kept.
KeepFaces
property in object RemoveFace
Get the specified faces to be kept.
KeepSegmentation
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of mode with segmentation (Keep V4 Segmentation ).
Kerning
property in object DrawingTextProperties
Font kerning property.
KeyboardRotationAngleValue
property in object VisualizationSettingAtt
Retrieves the angle value for rotations operated through key combinations.
KindOfSet
property in object AnnotationSet
Give the kind of set (Part, Product.
KinematicsWorkbench
object
Interface to access all Kinematics entities.
KnowledgeActivateObject
object
Interface to access a CATIAKnowledgeActivableObject.
KnowledgeBuildPathDirectory
property in object LanguageSheetSettingAtt
Returns or sets the CATKnowledgeBuildPath setting parameter.
KnowledgeInHybridDesignMode
property in object PartInfrastructureSettingAtt
Returns or sets the "KnowledgeInHybridDesignMode" parameter.
KnowledgeObject
object
Interface to access a CATIAKnowledgeObject.
KnowledgeSheetSettingAtt
object
The interface to access a CATIAKnowledgeSheetSettingAtt.
LAYER
property in object PCBArea
LODMode
property in object CacheSettingAtt
Returns or sets the LOD generation mode parameter.
Label
property in object DatumSimple
Retrieves or sets Label.
Label
property in object DatumTarget
Retrieves Label.
Language
property in object ExpertRule
Returns or sets the language of a rule.
Language
property in object ExpertCheck
Returns or sets the language of a check.
LanguageSheetSettingAtt
object
The interface to access a CATIALanguageSheetSettingAtt.
LastAct
property in object HtsCCPSettingAtt
Returns or sets the LastAct parameter.
LastCurvesConstraint
property in object HybridShapeWrapCurve
Returns or sets constraint at last curves of the WrapCurve.
LateralFaceElement
property in object Thread
Returns or sets the lateral face (must be cylindrical) .
Law
object
Represents the Law object.
LawType
property in object HybridShapeCurvePar
Returns or sets the law type.
Layer_for_No_Asso
property in object V4WritingSettingAtt
Returns or sets the layer for not associative data.
Layout
property in object SpecsViewer
Returns or sets the specification tree layout.
Layout
property in object SpecsAndGeomWindow
Returns or sets the specification and geometry window layout.
Layout2DFactory
object
Layout2DRoot
object
Interface to manage the 2D Layout root.
Layout2DSettingAtt
object
The interface to access a CATIA2DLSettingAtt.
Layout2DSheet
object
The interface to access a Layout2D Sheet.
Layout2DSheets
object
A collection of all the Layout sheets 2DL currently managed by the LayoutRoot.
Layout2DView
object
The interface to access a Layout2D View.
Layout2DViews
object
LayoutDefaultRenderStyle
property in object Layout2DSettingAtt
Returns the default render style attribute value to apply to a Layout at its creation parameter.
LeaderAssociativity
property in object FTAInfraSettingAtt
Returns or sets the Leader Associativity setting parameter value.
Leaders
property in object DrawingText
Returns the drawing leader collection of the drawing text.
Leaders
property in object DrawingTable
Returns the drawing leader collection of the drawing table.
Leaders
property in object DrawingWelding
Returns the drawing leader collection of the drawing welding.
LeafProduct
property in object SelectedElement
Returns the leaf product corresponding to the selection in the specification tree.
Left
property in object Window
Returns or sets the distance of the window with respect to the inner left side of the frame.
Left
property in object PageSetup
Returns or sets the lower left corner location with respect to the left of the sheet of paper.
Left
property in object Application
Returns or sets the distance from the application's frame window left side to the left side of the screen.
LeftMargin
property in object PageSetup
Returns or sets the left margin.
Length
object
Represents the length parameter.
Length
property in object HybridShapeExtrapol
Returns the length specifying the extrapolation limit.
Length
property in object DrawingTextRange
Returns the number of characters of the drawing text range.
Length
property in object Measurable
Returns the Length of a curve.
Length
property in object RenderingEnvironment
Returns or sets the cubic environment length value.
Length
property in object ProjectedToleranceZone
Retrieves length of the projected tolerance zone (in millimeters).
Length
property in object ArrangementRun
Returns the length of the ArrangementRun object.
Length
property in object ArrangementPathway
Returns the length of the ArrangementPathway object.
Length
property in object ArrangementBoundary
Returns the length of the ArrangementBoundary object.
Length1
property in object Chamfer
Returns the chamfer first length.
Length1
property in object HybridShapeCylinder
Returns or sets the length of the cylinder object in the given extrusion direction.
Length2
property in object Chamfer
Returns the chamfer second length.
Length2
property in object HybridShapeCylinder
Returns or sets the length of the cylinder object in the opposite direction of given extrusion direction.
LengthMaxTolerance
property in object ToleranceSheetSettingAtt
Returns or sets the LengthMaxTolerance parameter.
LengthMinTolerance
property in object ToleranceSheetSettingAtt
Returns or sets the LengthMinTolerance parameter.
LengthNumber
property in object ManufacturingToolCorrector
Gives the corrector length number.
LibTabSettingAtt
object
LicenseSettingAtt
object
Interface to handle the licensing settings.
LifeCycleCheckIn
method in object StiEngine
Checks the CATIAStiDBItem Into SmarTeam Check-In Vault .
LifeCycleCheckOut
method in object StiEngine
Checks Out Without Propagation the CATIAStiDBItem in SmarTeam.
LifeCycleCheckOutPropagated
method in object StiEngine
Checks Out With Propagation the CATIAStiDBItem in SMARTEAM.
LifeCycleNewRelease
method in object StiEngine
Enables a New Release Without Propagation for the CATIAStiDBItem in SmarTeam.
LifeCycleNewReleasePropagated
method in object StiEngine
Enables a NewRelease action With Propagation for the CATIAStiDBItem in SmarTeam.
LifeCycleRelease
method in object StiEngine
Releases the CATIAStiDBItem in SmarTeam Release Vault .
LifeCycleUndoCheckOut
method in object StiEngine
Cancels Check-Out operation on the CATIAStiDBItem in SmarTeam .
LightAreaType
property in object RenderingLight
Returns or sets the light area type.
LightSource
object
Represents the light source.
LightSources
object
A collection of all the LightSource objects.
LightSources
property in object Viewer3D
Returns the viewer's light source collection.
LightViewerMode
property in object VisualizationSettingAtt
Returns the LightViewerMode parameter.
LightingIntensity
property in object Viewer3D
Returns or sets the lighting intensity.
LightingMode
property in object Viewer3D
Returns or sets the lighting mode.
Limit
object
Represents the limit of a prism or a hole shape.
LimitBoundingBox
property in object DrawingViewGenerativeBehavior
Returns or sets the bounding box limits under which a part.
LimitCurve
property in object HybridShapeBump
Returns or sets the limit curve.
LimitDeformation
property in object CompositesMaterial
returns or set the limit deformation defined in Composites tab in radian.
LimitFaceElement
property in object Thread
Returns or sets the limit face (must be planar ) .
LimitMode
property in object Limit
Returns or sets the limit mode.
LimitType
property in object HybridShapeExtrapol
Returns or sets the limit type of extrapolation.
Limitation
property in object HybridShapeSphere
Returns whether the sphere is created as a whole sphere or not.
LimitingElement
property in object Limit
Returns or sets the limiting element.
Limits
method in object DimensionLimit
Retrieves dimension limit values.
LinAccelColor
property in object RobAnalysisSettingAtt
Returns or sets the LinAccelColor parameter.
LinAccelLimit
property in object RobAnalysisSettingAtt
Returns or sets the LinAccelLimit parameter.
LinSpeedColor
property in object RobAnalysisSettingAtt
Returns or sets the LinSpeedColor parameter.
LinSpeedLimit
property in object RobAnalysisSettingAtt
Returns or sets the LinSpeedLimit parameter.
Line
object
Represents the hybrid shape Line feature object.
Line
property in object HybridShapePlane1Line1Pt
Returns or sets the passing line.
Line2D
object
Class defining a line in 2D Space.
LineCap
property in object PageSetup
Returns or sets Line cap for print.
LineOfSightNode
property in object SWKManikin
Returns the Line of sight node of the current manikin.
LineTypeOverlappingCheck
property in object PageSetup
Returns or sets text Line type overlap check option for print.
LineTypeSpecification
property in object PageSetup
Returns or sets Line type specification for print.
LineWidth
property in object MeasureSettingAtt
Returns or sets the LineWidth parameter.
LineWidthSpecification
property in object PageSetup
Returns or sets Line width specification for print.
LinearRepartition
object
Represents the linear repartition.
LineicCgrMode
property in object VisualizationSettingAtt
Returns the LineicCgrMode parameter.
Link
method in object SchCntrDocLink
Create an external link to another connector.
LinkMode
property in object MultiCADSettingAtt
LinkSendMode
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LinkSendMode attribute.
LinkTo
method in object FunctAssociation
Create a link to another object.
LinkType
method in object StiDBChildren
Returns the Link Type from its index in the CATIAStiDBChildren.
LinkWiGeomType
property in object DefaultAnnotation
Get the type of link between the default annotation and the geometry.
LinkedCount
property in object FunctAssociation
Get count of linked objects.
LinkedDocuments
property in object AnalysisManager
Returns the collection containing the documents linked to analysis document.
LinkedExternalReferences
property in object PartInfrastructureSettingAtt
Returns or sets the "LinkedExternalReferences" parameter.
LinkedExternalReferencesOnlyOnPublication
property in object PartInfrastructureSettingAtt
Returns or sets the "LinkedExternalReferencesOnlyOnPublication" parameter.
LinkedExternalReferencesWarningAtCreation
property in object PartInfrastructureSettingAtt
Returns or sets the "LinkedExternalReferencesWarningAtCreation" parameter.
LinkedScaleStatus
property in object RenderingEnvironmentWall
Returns or sets the texture scaling link status.
List
object
Represents a CATIAList.
ListAffectedComponents
method in object AssemblyFeature
Retrieves the affected component list.
ListAllStates
method in object DNB3DStateMgmt
ListAlternateGraphics
method in object SchRouteAlternateGraphic
Lists the alternate graphics of a route.
ListAttached
method in object Dressup
Returns the list of products attached to a given link.
ListAttributes
method in object PspAttribute
Retrieves a list of Attributes of an object in the the input domain ID.
ListBendData
method in object PspStretchableData
Returns the bend radii.
ListBoundaryElements
method in object SchGRRZone
List all boundary elements of this zone graphical representation.
ListCompartments
method in object PspAppFactory
Retrieves a list of Compartments in the current Product.
ListCompatiblePartNumbers
method in object PspFunctional
Retrieves a list of compatible Part numbers and part types.
ListConnectables
method in object PspConnectable
Retrieve a list of connectors of the object.
ListConnectedGRRs
method in object SchGRR
Get a list of graphical objects that connects to this graphic representation.
ListConnectors
method in object SchConnectable
Find all the connectors of this schematic object on a specific graphical image.
ListDefinitionPoints
method in object PspStretchableData
Returns the points defining the object.
ListDesignGeometries
method in object ManufacturingSetup
Retrieves the design geometries list from a Manufacturing Setup.
ListDesignGeometriesProducts
method in object ManufacturingSetup
Retrieves the design geometries products list from a Manufacturing Setup.
ListDoubleDiscreteValues
method in object PspAttribute
Retrieves double discrete values for the input attribute.
ListDropOffViews
method in object SchDropOffView
Lists drafting views in this schematics diagram.
ListEncodedDecodedDiscreteValues
method in object PspAttribute
Retrieves Encoded-decoded discrete values for the input attribute.
ListExtremityObjects
method in object SchNetworkAnalysis
List the extremity objects of the network.
ListFixtureGeometries
method in object ManufacturingSetup
Retrieves the fixture geometries list from a Manufacturing Setup.
ListFixtureGeometriesProducts
method in object ManufacturingSetup
Retrieves the Fixture geometries products list from a Manufacturing Setup.
ListGRRZoneOwners
method in object SchBoundaryElem
Get the list of owners of this zone.
ListGraphicalImages
method in object SchCompGraphic
List all graphical images (instances of the rep) of a component.
ListGraphicalPrimitives
method in object SchCntrGraphic
List all graphical primitives of a connector.
ListGraphicalPrimitives
method in object SchRouteGraphic
List all graphical primitives of a route.
ListGraphicalRepresentations
method in object SchCompGraphic
List all graphical representation of a component.
ListGraphicalRepresentations
method in object SchZoneGraphic
List all graphical representations of a zone.
ListGroups
method in object PspAppFactory
Retrieve a list of Groups in the current Product.
ListInProcessModelBodies
method in object ManufacturingSetup
Retrieves the In Process Model Bodies list from a Manufacturing Setup.
ListIntegerDiscreteValues
method in object PspAttribute
Retrieve integer (long) discrete values for the input attribute.
ListInternalFlows
method in object SchCompFlow
List all internal flow objects of a component.
ListLogicalLines
method in object PspAppFactory
Returns a list of logical lines in the current Product.
ListMachinableGeometry
method in object ManufacturingMachinableArea
Retrieves the machinable geometry list.
ListManufacturingActivityConnected
method in object ManufacturingMachinableArea
Retrieves the manufacturing activity connected list.
ListMechanismsContext
method in object Dressups
Each mechanism of the list given by ListPossibleMechanisms has a context product on which it is defined.
ListMembers
method in object SchComponentGroup
List all connectable members in the group.
ListNetworkObjects
method in object SchNetworkAnalysis
List the connected objects in the network.
ListOfMagnitudes
property in object UnitsSheetSettingAtt
Returns or sets the ListOfMagnitudes parameter.
ListOfMagnitudesSize
property in object UnitsSheetSettingAtt
Returns or sets the ListOfMagnitudesSize parameter.
ListOfPackagesToLoad
property in object LanguageSheetSettingAtt
Returns or sets the ListOfPackagesToLoad parameter.
ListParameter
object
Represents a CATIAListParameter.
ListPartParametricAttributes
method in object PspBuildPart
Returns the part parametric attribute names.
ListPhysicals
method in object PspAppFactory
Returns a list of Physical objects in the node.
ListPointedGeometry
method in object ManufacturingMachinableGeometry
Retrieves a pointed geometry and its product.
ListPossibleMechanisms
method in object Dressups
Returns information about all possible mechanisms on which a dressup can be created.
ListRouteSymbols
method in object SchGRRRoute
List route symbols on the route.
ListSchConnectors
method in object SchInternalFlow
List all schematic connectors associated with an internal flow.
ListShapesOfPointedGeometry
method in object ManufacturingMachinableGeometry
Retrieves the pointed shape list.
ListStates
method in object DNB3DState
ListStockGeometries
method in object ManufacturingSetup
Retrieves the stock geometries list from a Manufacturing Setup.
ListStockGeometriesProducts
method in object ManufacturingSetup
Retrieves the Stock geometries products list from a Manufacturing Setup.
ListStringDiscreteValues
method in object PspAttribute
RetrievesString discrete values for the input attribute.
ListZones
method in object SchAppGroup
List application zone objects.
Load3dStateAndPos
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the Load3dStateAndPos parameter.
LoadAllChildProcMfgCtx
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadAllChildProcMfgCtx parameter.
LoadAllPackages
property in object LanguageSheetSettingAtt
Returns or sets the LoadAllPackages parameter.
LoadAnnotationSetsList
method in object AnnotationSets
Loads the Annotation Sets list.
LoadAssocPrdResChild
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadAssocPrdResChild parameter.
LoadChildProcMfgCtx
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadChildProcMfgCtx parameter.
LoadCtxWithFileGeometry
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadCtxWithFileGeometry parameter.
LoadDispMfgCtx
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadDispMfgCtx parameter.
LoadENVGeomFromENVdb
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadENVGeomFromENVdb parameter.
LoadExtendedLanguageLib
property in object LanguageSheetSettingAtt
Returns or sets the LoadExtendedLanguageLib parameter.
LoadFeedProcMfgCtx
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadFeedProcMfgCtx parameter.
LoadFromPPRHub
method in object MHIOpenAccess
LoadMfgAssmbly
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadMfgAssmbly parameter.
LoadMfgKits
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadMfgKits parameter.
LoadPSSData
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadPSSData attribute.
LoadPrdResUserAttribs
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadPrdResUserAttribs parameter.
LoadResGeo
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadResGeo parameter.
LoadScriptFromFilePath
method in object FeatureGenerator
Sets a script from a document file.
LoadType
property in object ABQConcentratedForce
ets or returns the load type whether Point Load, Distributed Load or Load Density.
LoadUnconstrainedMfgCtx
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LoadUnconstrainedMfgCtx parameter.
Loads
property in object ABQHeatTransferStep
Returns the ABQLoads container associated with the step.
Loads
property in object ABQGeneralStaticStep
Returns the ABQLoads container associated with the step.
Loads
property in object ABQExplicitDynamicsStep
Returns the ABQLoads container associated with the step.
LocalCache
property in object Application
Returns or sets the default local cache path used by the application.
LocalPath
property in object CacheSettingAtt
Retrieves or sets the cache local path.
LockActivitesWithinProgram
method in object ManufacturingProgram
LockActivty
method in object ManufacturingOperation
LockAssignedPrdOnLoad
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the LockAssignedPrdOnLoad parameter.
LockStatus
property in object DrawingView
Returns or sets the lock status of a drawing view.
LockStatus
property in object Layout2DView
Returns or sets the lock status of a Layout2D view.
LockUserDefault
property in object DraftingSettingAtt
Returns the LockUserDefault parameter.
Loft
object
Loft feature.
LogicalActFilter
property in object TreeTabSettingAtt
LogicalDataAttrList
property in object PlugMapViewSettingAtt
Returns or sets the LogicalDataAttrList parameter.
Logo
property in object PageSetup
Returns or sets the file containing the logo image.
LogoVisibility
property in object PageSetup
Returns or sets LogoVisibility option for print.
Loop
object
The interface to access a CATIALoop.
LowerLimit1
property in object Joint
Gets or returns the lower limit of the joint, for the first parameter.
LowerLimit2
property in object Joint
Gets or returns the lower limit of the joint, for the second parameter.
localCsys
property in object ABQGravity
ets or returns the local coordinate system of the gravity load.
localCsys
property in object ABQRigidCoupling
Sets or returns the local coordinate system.
localCsys
property in object ABQDisplacementBC
ets or returns the local coordinate system of the boundary condition's degrees of freedom.
localCsys
property in object ABQSmoothCoupling
Returns or sets the local coordinate system.
localCsys
property in object ABQConcentratedForce
ets or returns the local coordinate system of the concentrated force.
MAName
property in object MfgAssembly
Returns or sets the Name of the Manufacturing Assembly.
MAPartNumber
property in object MfgAssembly
Returns or sets the Part Number of the Manufacturing Assembly.
MAType
property in object MfgAssembly
Returns the Type of the Manufacturing Assembly.
MHILoadParameters
object
Interface representing a means to set information that is needed for the load and also to retrieve this information on the loaded document.
MHIOpenAccess
object
Interface representing a means to load data from the Hub into V5.
MHIRelationManagement
object
MHISaveAccess
object
Interface representing a means to (1) Save data to the Hub (2) Retrieve certain information on the loaded document DNBIAMHISaveAccess is implemented on Document.
MSGE
property in object ErrorlogStatisticsSettingAtt
Returns or sets the state ot the message field.
MTPActColor
property in object HtsTaskDisplaySettingAtt
Returns or sets the MTPActColor parameter.
MTPActSymbol
property in object HtsTaskDisplaySettingAtt
Returns or sets the MTPActSymbol parameter.
MachinableFeature
property in object ManufacturingActivity
Retrieve the machinable area of a Manufacturing Activity.
MachinableGeometryCount
method in object ManufacturingMachinableArea
Returns the machinable geometry list count.
Machine
property in object ManufacturingSetup
Give the Machine linked to a Manufacturing Setup.
MachineType
property in object ManufacturingMachine
Return the Type of a Machine.
MachiningAxisSystem
property in object ManufacturingSetup
Retrieves the Machining Axis system from a Manufacturing Setup.
MachiningProcess
object
MachiningProcess defines a set of properties and methods to apply a Machining Process to a geometrical feature (design or manufacturing).
MachiningTime
property in object ManufacturingActivity
Retreive the milling time of a Manufacturing Activity.
MacrosSettingAtt
object
Setting controller for the Macros tab page.
Magnitude
property in object ABQPressure
ets or returns the magnitude of the pressure load.
Magnitude
property in object Unit
Returns the magnitude associated to the unit.
Magnitude
property in object ABQTemperature
ets or returns the magnitude of the temperature field.
MailClientLaunchMode
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the MailClientLaunchMode attribute.
MainBody
property in object Part
Returns or sets the main body of the part.
MainDraftAngle
property in object AutoDraft
Returns or sets the main draft angle.
MajorRadius
property in object Ellipse2D
MakeUserSurfaceNode
method in object UserSurfaces
Usefull to create a User Surface Node from two others User Surface.
MakeUserSurfaceNode2
method in object UserSurfaces
Usefull to create a User Surface Node from a list of User Surfaces.
ManRefSiz
property in object FTAInfraSettingAtt
Returns or sets the Manipulator Reference Size setting parameter value.
ManZooCap
property in object FTAInfraSettingAtt
Returns or sets the Manipulator Zoom Capability setting parameter value.
ManageHideShowBody
property in object Capture
Manage the visibility of Part instances, bodies and geometrical sets across the Capture.
Manifold
property in object HybridShapeTrim
Gets or sets manifold mode.
Manikin
property in object SWKIKConstraint
Returns the manikin which owns this IK constraint.
ManipAutoInsert
property in object ManipSettingAtt
Returns the ManipAutoInsert parameter Role : Returns the ManipAutoInsert (Automatic insert for manipulation mode) parameter.
ManipSettingAtt
object
Interface to handle parameters of DMU Manip Tools Options Tab page Role : This interface is implemented by a component which represents the controller of DMU Manip Tools Options parameter settings.
ManufacturingAPTGenerator
object
Generator of APT output machining code.
ManufacturingActivity
object
ManufacturingActivity defines a set of methods and mainly adds some specific methods and services in Manufacturing on ProcessPlan Activities.
ManufacturingActivityConnectedCount
method in object ManufacturingMachinableArea
Returns the manufacturing activity connected list count.
ManufacturingCopyTransformation
object
Interface representing the Manufacturing Copy Transformation object.
ManufacturingFeature
object
ManufacturingFeature defines a set of methods to access a Manufacturing Feature.
ManufacturingFeatures
object
Collection of Manufacturing Features.
ManufacturingFeatures
property in object ManufacturingView
Returns the Manufacturing Features of a Manufacturing View.
ManufacturingGeneratorData
object
Represents the manufacturing output stream object.
ManufacturingHole
object
Hole Feature in Machining domain.
ManufacturingInsert
object
The interface to access a CATIAManufacturingInsert.
ManufacturingMachinableArea
object
Machinable Area in Manufacturing.
ManufacturingMachinableFeature
object
Machinable Feature in Manufacturing.
ManufacturingMachinableGeometry
object
Represents the machinable geometry object.
ManufacturingMachine
object
Machine in machining domain.
ManufacturingMachiningAxis
object
ManufacturingMachiningAxis defines a set of methods to manage a Machining Axis System or an Origin.
ManufacturingOperation
object
ManufacturingOperation defines a set of methods.
ManufacturingOutput
object
Object that represents the output machining code.
ManufacturingOutputGenerator
object
Father object to generate output machining code.
ManufacturingPattern
object
The Manufacturing Pattern is a specialized feature used to machine the same item several times at several positions.
ManufacturingPrecedence
object
Defines a precedence relation between objects.
ManufacturingPrecedences
object
Interface that manage the precedences for an object of type @ CATIAManufacturingActivity.
ManufacturingPrismaticMachiningArea
object
ManufacturingPrismaticMachiningArea defines a set of properties and methods.
ManufacturingProcess
object
A ManufacturingProcess for a Manufacturing Document.
ManufacturingProgram
object
A ManufacturingProgram for a Manufacturing Document.
ManufacturingSetup
object
A ManufacturingSetup for a Manufacturing Document.
ManufacturingSurfaceGeomArea
object
Represents the Manufacturing Surface NCGeometry.
ManufacturingSurfaceMachiningArea
object
Represents the Manufacturing Surface Machining Area.
ManufacturingTool
object
A ManufacturingTool for a Manufacturing Document.
ManufacturingToolAssembly
object
Represents the tool assembly.
ManufacturingToolCorrector
object
Manufacturing tool corrector.
ManufacturingToolMotion
object
A ManufacturingToolMotion for a Manufacturing Document.
ManufacturingView
object
The Manufacturing View is the object that holds all the manufacturing features of the model.
MappingType
property in object RenderingMaterial
Returns or sets the mapping type of a material.
Mapping_File_Save_Mode
property in object MigrBatchSettingAtt
Retrieves or sets the state of the "Mapping Files Location for Saving" setting parameter.
Mapping_Saving_File
property in object MigrBatchSettingAtt
Retrieves or sets the state of the "Specified Directory" setting parameter.
Marker2D
object
Represents a marker 2D in a specified annotated view.
Marker2DAutoNaming
property in object MarkerSettingAtt
Returns or sets the activation state for 2D annotations automatic naming (TRUE naming is automatic, FALSE the naming is not automatic).
Marker2DAutoNaming
property in object N4DNavigatorSettingAtt
Marker2Ds
object
A collection of Marker2Ds objects.
Marker2Ds
property in object AnnotatedView
Returns the Marker2D Collection associated with the annotated view.
Marker3D
object
Represents a marker 3D.
Marker3DAutoNaming
property in object MarkerSettingAtt
Returns or sets the activation state for 3D annotations automatic naming (TRUE naming is automatic, FALSE the naming is not automatic).
Marker3DAutoNaming
property in object N4DNavigatorSettingAtt
Marker3Ds
object
A collection of Marker3D objects.
Marker3Ds
property in object Clash
Returns the Marker3Ds collection of the clash.
Marker3Ds
property in object Section
Returns the Marker3Ds collection of the section.
Marker3Ds
property in object Distance
Returns the Marker3Ds collection of the distance.
Marker3Ds
property in object NavigatorWorkbench
Returns the Marker3Ds collection.
MarkerAutoUpdate
property in object N4DNavigatorSettingAtt
Returns or sets the activation of the automatic update on product structure modification (TRUE update is done automatically, FALSE update is done manually).
MarkerDefaultsDashed
property in object MarkerSettingAtt
Returns or sets the default dashed value of an annotation (oValue the dashed value).
MarkerDefaultsDashed
property in object N4DNavigatorSettingAtt
MarkerDefaultsFont
property in object N4DNavigatorSettingAtt
MarkerDefaultsSize
property in object N4DNavigatorSettingAtt
MarkerDefaultsWeight
property in object MarkerSettingAtt
Returns or sets the default weight value of an annotation (oValue the weight value).
MarkerDefaultsWeight
property in object N4DNavigatorSettingAtt
MarkerSettingAtt
object
Interface to handle the Marker settings The different settings are: MarkerAutoUpdate Update on product structure modifications and scenes activation.
MarkerTextDashed
property in object N4DNavigatorSettingAtt
MarkerTextDashed2D
property in object MarkerSettingAtt
Returns or sets the default dashed value of a 2D text annotation (oValue the dashed value).
MarkerTextDashed3D
property in object MarkerSettingAtt
Returns or sets the default dashed value of a 3D text annotation (oValue the dashed value).
MarkerTextDefaultsFont2D
property in object MarkerSettingAtt
Returns or sets the default font of a 2D annotation (oValue the font name).
MarkerTextDefaultsFont3D
property in object MarkerSettingAtt
Returns or sets the default font of a 3D annotation (oValue the font name).
MarkerTextDefaultsSize2D
property in object MarkerSettingAtt
Returns or sets the default size value of a 2d annotation (oValue the size value).
MarkerTextDefaultsSize3D
property in object MarkerSettingAtt
Returns or sets the default size value of a 3d annotation (oValue the size value).
MarkerTextWeight
property in object N4DNavigatorSettingAtt
MarkerTextWeight2D
property in object MarkerSettingAtt
Returns or sets the default weight value of a 2D text annotation (oValue the weight value).
MarkerTextWeight3D
property in object MarkerSettingAtt
Returns or sets the default weight value of a 3D text annotation (oValue the weight value).
Mass
property in object Inertia
Returns the mass.
Mass
property in object Analyze
Returns the product mass value.
MassCost
property in object CompositesMaterial
returns or set the cost per mess defined in Composites tab in $ per kg.
MassScalings
property in object ABQInitialStep
Returns the ABQMassScalings container associated with the step.
Material
object
Represents a Material object.
Material
property in object PositionedMaterial
Returns the material object from the current positioned material.
MaterialCondition
object
Interface for accessing Material Condition modifier on a TPS.
MaterialCondition
method in object Annotation
Get the annotation on the MaterialCondition interface.
MaterialDocument
object
Represents the Document object for materials.
MaterialESSObjectSettingAtt
object
The interface to access a CATIAMaterialESSObjectSettingAtt.
MaterialFamilies
object
A collection of all the MaterialFamily objects.
MaterialFamily
object
Represents a Material Family object.
MaterialManager
object
Interface to manage material manager object.
MaterialType
property in object CompositesMaterial
returns or set the material type defined in Composites tab.
Materials
object
A collection of all the Material objects.
Materials
property in object MaterialFamily
Returns the material collection object from the current material family.
MaxAngle
property in object FittingSettingAtt
MaxCopyFile
property in object GlobalStatisticsSettingAtt
Returns or sets the maximum number of copy files.
MaxDeformation
property in object CompositesMaterial
returns or set the maximum deformation defined in Composites tab in radian.
MaxDisplayedResults
property in object SearchSettingAtt
Returns or sets the Max Displayed Results attribute.
MaxEvalsNb
property in object Optimization
Returns or sets the maximum number of model updates allowed during one run of the optimization.
MaxEvalsWoImprovement
property in object Optimization
Returns or sets the maximum number of model updates without improvement of the problem solution during one run of the optimization.
MaxInc
property in object ABQHeatTransferStep
ets or returns the maximum increment size if TimeIncrementationMethod=AUTO_INCREMENT .
MaxInc
property in object ABQGeneralStaticStep
eturns or sets the maximum increment if the type of the incrementation is set to AUTO_INCREMENT.
MaxMemory
property in object ABQJob
MaxNumInc
property in object ABQHeatTransferStep
Sets or returns the maximum number of increments if TimeIncrementationMethod=AUTO_INCREMENT .
MaxNumInc
property in object ABQGeneralStaticStep
eturns or sets the maximum number of increments if the type of the incremention is set to AUTO_INCREMENT.
MaxPreHighlightedElements
property in object SearchSettingAtt
Returns or sets the Max Pre-Highlighted Elements attribute.
MaxSelectionMove
property in object VisualizationSettingAtt
Returns the MaxSelectionMove parameter.
MaxSizePerFile
property in object GlobalStatisticsSettingAtt
Returns or sets the maximum size per file.
MaxStiffness
property in object ABQMechConnBehavior
Sets or returns the contact stiffness type hard contact pressure overclosure.
MaxStiffnessValue
property in object ABQMechConnBehavior
Sets or returns the max stiffness value for mechanical connection.
MaxStiffness_Type
enum
Max stiffness types.
MaxTime
property in object Optimization
Returns or sets the maximum time allowed for one run of the optimization (in minutes).
MaximumDeviation
property in object HybridShapeCurveSmooth
Returns the MaximumDeviation.
MaximumDeviationActivity
property in object HybridShapeCurveSmooth
Returns or sets the MaximumDeviationActivity.
MaximumDeviationValue
property in object HybridShapeFill
Sets or Gets the maximum deviation allowed for smoothing operation in fill commnd.
MaximumDeviationValue
property in object HybridShapeProject
Sets or Gets the maximum deviation allowed for smoothing operation.
MaximumDeviationValue
property in object HybridShapeCurvePar
Sets or Gets the maximum deviation allowed for smoothing operation.
MaximumDistance
property in object Distance
Returns or sets the maximum distance value for the computation (valid only for band analysis).
MaximumSize
property in object PageSetup
Returns or sets whether the document or the image should be printed at the maximum size with respect to the page size and margins.
MaximumTimeIncrementLimit
property in object ABQExplicitDynamicsStep
Sets or returns the maximum time increment limit.
MaximumTolerance
property in object RealParam
Returns or sets the value of the maximum tolerance of a parameter.
Measurable
object
The interface to access a CATIAMeasurable Get measurements on the object.
Measure
property in object Export3DXmlSettingAtt
MeasureSettingAtt
object
The interface to access a CATIAMeasureSettingAtt.
MeasureType
property in object Distance
Returns or sets the type of distance that will be calculated.
MeasureUnitSymbol
property in object HybridShapeLawDistProj
Returns or sets the measure unit symbol for heterogeneous law.
Mechanism
object
Interface to access the Mechanism object.
Mechanism
property in object Dressup
Returns the mechanism on which a dressup is applied.
MechanismCommand
object
Interface to access the Command object (in Kinematics context).
MechanismCommands
object
A collection of all MechanismCommand entities currently managed by the application.
MechanismIndex
property in object MoveHomeAct
Sets and Retrieves mechanism index for the move activity.
MechanismIndex
property in object MoveJointsAct
Sets and Retrieves mechanism index for the activity.
Mechanisms
object
A collection of all Mechanism entities currently managed by the application.
Mechanisms
property in object KinematicsWorkbench
Returns the Mechanisms collection.
MemUse
property in object PCSStatisticsSettingAtt
Returns or sets the state ot the memory field.
MemberMaterial
property in object MaterialESSObjectSettingAtt
Returns or sets the MemberMaterial parameter.
MemberTypes
property in object TypeESSObjectSettingAtt
Returns or sets the MemberTypes parameter.
Members
property in object PspGroup
Returns a list of Members of the Group.
Memo
property in object SWKManikinPart
Returns or records miscellaneous user-added information about the part.
MemoryStopperState
property in object MemoryWarningSettingAtt
Returns or sets the activation state of the memory stopper mechanism.
MemoryUnit
property in object ABQJob
Sets or returns the units to be used for specifying the maximum memory to be used by the solver.
MemoryUnit_Type
enum
MemoryWarningSettingAtt
object
Represents the base object to handle the parameters of memory warning mechanism.
MergeCells
method in object DrawingTable
Merges a group of cells.
MergeEnd
property in object Sweep
Returns the Sweep merge end flag (for thin Sweep only).
MergeEnd
property in object Prism
Returns the prism merge end flag (for thin prism only).
MergeEnd
property in object Revolution
Returns the Revol merge end flag (for thin Revol only).
MergeMode
property in object Sweep
Returns or sets the end mode .
MergeShapeName
method in object Merges
Returns the name of the associated shape.
Merges
object
MergingDistance
property in object HybridShapeHealing
Returns the Merging Distance of the healing.
MeshManager
property in object AnalysisModel
Returns the MeshManager defined on the analysis model.
MfgActivities
object
The collection of MfgActivities related to the Manufacturing Document .
MfgAssembly
object
This Interface represents a Manufacturing Assembly.
MfgAssemblyFactory
object
Represents the factory to creates a manufacturing assembly.
MfgCtxPrevProcRelationType
property in object MfgHubSettingAtt
MfgHubSettingAtt
object
Represents the Manufacturing Hub setting controller object.
MfgToolMotions
object
The collection of MfgToolMotions related to the Manufacturing Document .
MigrBatchSettingAtt
object
Represents the object to handle the setting parameters of the "Migration Batch" tab page.
Migration_Format
property in object MigrBatchSettingAtt
Retrieves or sets the state of the "Format" setting parameter.
Migration_Interface
property in object MigrBatchSettingAtt
Retrieves or sets the "Migration Interace" setting parameter.
Migration_Type
property in object MigrBatchSettingAtt
Retrieves or sets the state of the "Conversion Mode" setting parameter.
MinInc
property in object ABQHeatTransferStep
ets or returns the minimum increment size if TimeIncrementationMethod=AUTO_INCREMENT .
MinInc
property in object ABQGeneralStaticStep
Returns or sets the minimum increment if the type of the incrementation is set to AUTO_INCREMENT.
MinimumDistance
property in object Distance
Returns or sets the minimum distance value for the computation (valid only for band analysis).
MinimumFPSMode
property in object VisualizationSettingAtt
Returns the MinimumFPSMode parameter.
MinimumSpaceFPSMode
property in object VisualizationSettingAtt
Returns the MinimumSpaceFPSMode parameter.
MinimumTolerance
property in object RealParam
Returns or sets the value of the minimum tolerance of a parameter.
MinorRadius
property in object Ellipse2D
Mirror
object
Represents the mirror shape.
Mirror
method in object Track
Produces a "mirror image" of the track.
Mirror
property in object DrawingTextProperties
Returns or sets the mirroring of the drawing text.
MirroringObject
property in object Mirror
Returns the mirroring Object.
MirroringPlane
property in object Mirror
Returns or sets the mirroring reference plane.
Mode
property in object Draft
Returns or sets the draft mode.
Mode
property in object Chamfer
Returns or sets the chamfer definition mode.
Mode
property in object AutoDraft
Returns or sets the draft mode.
Mode
property in object Constraint
Returns or sets the constraint driving mode.
Mode
property in object HybridShapeTrim
Gets or sets Trim mode.
Mode
property in object RenderingLight
Returns or sets the light mode.
Mode
property in object HybridShapeDevelop
Returns or sets the developing mode.
Mode
property in object HybridShapeSweepLine
Returns or sets the linear sweep mode.
Mode
property in object HybridShapeSweepCircle
Returns or sets the circular sweep mode.
Mode
property in object HybridShapeSweepExplicit
Returns or sets positioning mode used for the profile.
Mode
property in object HybridShapePositionTransfo
Returns or sets the positioning mode.
ModeCreateDisplay
property in object V4WritingSettingAtt
Returns or sets the curves associated to faces'boundaries creation option.
ModeErrorDisplay
property in object V4WritingSettingAtt
Returns or sets the error feature creation option.
ModeImageTextSize
property in object AnalysisPostProSettingAtt
Returns or sets the ModeImageTextSize parameter.
ModePos
property in object HybridShapeDevelop
Returns or sets the positioning mode used for the 2D wire.
ModelConsistencyCheck
property in object ABQJob
Sets or returns whether a model consistency check should be performed.
ModelPrint
property in object ABQJob
Sets or returns or sets whether model definition data is printed.
Model_Dimension
property in object V4WritingSettingAtt
Returns or sets the model dimension.
Model_Factor
property in object V4WritingSettingAtt
Returns or sets the model factor.
Model_File_Name
property in object V4WritingSettingAtt
Returns or sets the model file name in capital letters option.
Model_Unit
property in object V4WritingSettingAtt
Returns or sets the model unit.
Modifier
property in object FreeState
Retrieves Free State modifier.
Modifier
property in object TangentPlane
Retrieves Tangent Plane modifier.
Modifier
property in object DimensionLimit
Returns or sets the dimension single limit modifier.
Modifier
property in object ControledRadius
Retrieves Controled Radius modifier.
Modifier
property in object EnvelopCondition
Retrieves Envelop Condition modifier.
Modifier
property in object MaterialCondition
Retrieves Material Condition modifier.
Modify
method in object Relation
Modifies the relation.
ModifyGuideCurve
method in object HybridShapeLoft
Modifies the curve of a guide from the lofted surface.
ModifyGuideCurve
method in object HybridShapeSpine
Modifies a guide from the spine curve.
ModifyPoint
method in object DrawingArrow
Modify a point of an Arrow.
ModifyPoint
method in object DrawingLeader
Modify a point of an leader.
ModifyPrinterArrayForGroup
method in object PrintersSettingAtt
Modify a printer group: redefine the array of printers included in this group.
ModifyPrinterDirectoryState
method in object PrintersSettingAtt
Modify a printer file directory state.
ModifySectionCurve
method in object HybridShapeLoft
Modifies the curve of section from the lofted surface.
ModifySectionCurve
method in object HybridShapeSpine
Modifies a section or a plane from the spine curve.
ModifySectionOrient
method in object HybridShapeLoft
Modifies the orientation of the curve of a section from the lofted surface.
ModifySplittingElement
method in object AssemblySplit
Replaces the splitting element by a new one.
ModifyState
method in object DNB3DState
ModifyURL
method in object Noa
Modifies an URL.
ModifyURL
method in object FlagNote
Modifies an URL.
ModifyVisu
method in object Annotation
To refresh the 3D visualization.
MonoDimFeatEdge
object
1-D boundary belonging to a feature whose topological result is one dimensional.
MotionBasis
enum
Types of motion for the motion profile in robot controller.
MotionBasis
property in object WalkActivity
MotionBasis
property in object HumanActivityGroup
MotionBasis
property in object MoveHomeAct
MotionBasis
property in object MoveToPostureActivity
MotionBasis
property in object MoveJointsAct
MountActivity
object
Interface representing a Mount Activity.
MountDevice
method in object MountManager
MountManager
object
Represents the Mount Manger of a Robot.
MouseDoubleClicDelay
property in object VisualizationSettingAtt
Returns the MouseDoubleClicDelay parameter.
MouseSpeedValue
property in object VisualizationSettingAtt
Returns the MouseSpeedValue parameter.
MovableObject
property in object Move
Returns the movable object associated with the used object.
Move
object
Represents an object associated with any kind of objects which retrieves the corresponding movable object.
Move
property in object Solid
Returns the move object of the solid.
Move
method in object Track
Moves the track a certain position.
Move
property in object Shuttle
Returns the shuttle's move object.
Move
property in object SceneProductData
Returns the scene product's move object.
Move
method in object DrawingTable
Moves the table relatively to its original position.
Move
property in object Product
Returns the product's move object.
Move
property in object SWKManikin
Returns the manikin's move object.
MoveActionActivity
object
Interface representing a Move Activity inside a generic Action (Close Gun/Open Gun etc).
MoveAfterCreation
property in object FTAInfraSettingAtt
Returns or sets the Move After Creation setting parameter value.
MoveHomeAct
object
Interface representing a MoveHomeAct.
MoveJointsAct
object
Interface representing a MoveJointsAct.
MoveMode
property in object Track
Returns or sets the track's movement mode.
MoveMode
property in object Shuttle
Returns/Stores the shuttle move mode.
MoveOperation
method in object ManufacturingProgram
Move an existing Manufacturing Operation to a Manufacturing Program.
MoveProfileToPath
property in object Sweep
Returns the Sweep MoveProfileToPath flag (for Sweep Move Profile only).
MoveToCenterOfMass
property in object ABQRigidBodyConstraint
Sets or returns the move to center of mass flag.
MoveToPostureActivity
object
The object that represents an MoveToPosture(MTP) Activity.
MoveValue
method in object DrawingDimension
Move dimension value.
MoveWithFixTExtendMode
property in object AsmGeneralSettingAtt
Returns or sets the setting parameter managing the extension of a move to the components involved in a FixTogether.
MultiCADSettingAtt
object
MultipleSolution
property in object HybridShapeNear
Role : To get_MultipleSolution on the object.
MultiselectionMode
property in object DraftDomain
Changes the multiselection mode.
Mxdem
property in object ABQHeatTransferStep
ets or returns the maximum allowable emissivity change with temperature and field variables during an increment.
N4DNavigatorSettingAtt
object
Interface to handle the settings of the DMU Navigator workbench.
NLGeom
property in object ABQGeneralStaticStep
Returns or sets whether the geometry remains linear during the analysis.
NLGeom
property in object ABQExplicitDynamicsStep
Sets or returns whether the geometry remains linear during the analysis.
NLSInstanceName
property in object ArrNomenclature
NRLDir
property in object IgpOlpSettingAtt
Returns or sets value of NRL configuration file directory parameter.
NRLTeachDialogDisplayMode
property in object IgpOlpSettingAtt
Returns or sets value of OLPNRLTeachDialogDisplay parameter.
Name
property in object AnyObject
Returns or sets the name of the object.
Name
property in object Collection
Returns or sets the name of the object.
NamingMode
property in object PartInfrastructureSettingAtt
Returns or sets the "NamingMode" parameter.
NavigationStyle
property in object Viewer3D
Returns or sets the navigation style.
NavigatorWorkbench
object
The object to manage all DMU Navigator entities.
NbCommands
property in object Mechanism
Returns the number of commands in the mechanism.
NbDof
property in object Mechanism
Returns the degree of freedom of the mechanism.
NbExtLine
property in object DrawingDimension
Returns numbers of extension line of dimension.
NbGeneratedFeatures
property in object FeatureGenerator
Number of generated features in last generation.
NbInParameters
property in object Relation
Returns the number of input parameters of the relation.
NbInterruption
property in object DrawingArrow
Returns the number of interruptions of arrow path.
NbInterruption
property in object DrawingLeader
Returns the number of interruptions of leader path.
NbIsopars
property in object VisualizationSettingAtt
Returns the NbIsopars parameter.
NbJoints
property in object Mechanism
Returns the number of joints in the mechanism.
NbOutParameters
property in object Relation
Returns the number of output parameters of the relation.
NbPoint
property in object DrawingArrow
Returns the number of points of arrow path.
NbPoint
property in object DrawingLeader
Returns the number of points of leader path.
NbProducts
property in object Mechanism
Returns the number of products (i.
NbSymb
property in object DrawingDimension
Returns numbers of symbol of dimension.
NearLimit
property in object Viewer3D
Returns or sets the near limit for the near clipping plane.
NearestSolution
property in object HybridShapeCombine
Returns or sets whether the combined curve is or should be created as the curve closest to the first curve.
NeutralElement
property in object DraftDomain
Returns or sets the draft neutral element.
NeutralFiber
property in object Sweep
Returns the Sweep neutral fiber flag (for thin Sweep only).
NeutralFiber
property in object Prism
Returns the prism neutral fiber flag (for thin prism only).
NeutralFiber
property in object Revolution
Returns the Revol neutral fiber flag (for thin Revol only).
NeutralPropagationMode
property in object DraftDomain
Returns or sets the neutral element propagation mode.
NewBlock
method in object ManufacturingOutput
Create a New Block in the underlying output stream.
NewCamera
method in object Viewer
Creates a new camera from the viewpoint of the viewer.
NewCase
method in object AnalysisCases
Creates a new case and adds it to the case collection.
NewFrom
method in object Documents
Creates a new document from a document stored in a file.
NewLine
method in object ManufacturingOutput
Create a New Line in the underlying output stream.
NewPart
method in object PspBuildPart
Create a new part.
NewWindow
method in object Window
Creates a new window.
NewWindow
method in object Document
Activates the window which contains the document and duplicates this window.
NewWith3DSupport
property in object PartInfrastructureSettingAtt
Returns or sets the "NewWith3DSupport" parameter.
NewWithAxisSystem
property in object PartInfrastructureSettingAtt
Returns or sets the "NewWithAxisSystem" parameter.
NewWithGS
property in object PartInfrastructureSettingAtt
Returns or sets the "NewWithGS" parameter.
NewWithOGS
property in object PartInfrastructureSettingAtt
Returns or sets the "NewWithOGS" parameter.
NewWithPanel
property in object PartInfrastructureSettingAtt
Returns or sets the "NewWithPanel" parameter.
NextCFActivities
property in object Activity
This property returns the interface which manages the downstream control flow hierarchy on the activity.
NextLink
method in object DrawingViewGenerativeLinks
Returns the next link of the drawing view.
NextPRFActivities
property in object Activity
This property returns the interface which manages the downstream product flow hierarchy on the activity.
NextResources
property in object Resource
This property returns the interface which manages the downstream product flow hierarchy on the given resource.
NoOfBodiesToHeal
property in object HybridShapeHealing
Returns the number of bodies to heal of the healing.
NoOfEdgesToKeepSharp
property in object HybridShapeHealing
Returns the number of edges to keep sharp of the healing.
NoOfElementsToFreeze
property in object HybridShapeHealing
Returns the number of elements to heal of the healing.
NoZBufferSelectionMode
property in object VisualizationSettingAtt
Returns the NoZBufferSelectionMode parameter.
Noa
object
Interface for the TPS Noa object.
Noa
method in object Annotation
Get the annotation on the Noa interface.
NoaCreation
property in object FTASettingAtt
Returns or sets the Noa Creation parameter.
NodelockAlert
property in object LicenseSettingAtt
Retrieves or Sets the license expiry alert.
Nomenclature
property in object Product
Returns or sets the product's nomenclature.
Nominalvalue
property in object DimensionLimit
Returns the dimension limit nominal value.
NonSemanticAllwaysUpgrade
property in object FTASettingAtt
Returns or sets the Non SemanticAllways Upgrade parameter.
NonSemanticAllwaysUpgradeGeneralTol
property in object FTASettingAtt
Returns or sets the Non SemanticAllways Upgrade general tolerance parameter.
NonSemanticDatum
object
NonSemanticDimAllowed
property in object FTASettingAtt
Returns or sets the Non Semantic Dim Allowed parameter.
NonSemanticGDT
object
NonSemanticMarked
property in object FTASettingAtt
Returns or sets the Non Semantic Marked parameter.
NonSemanticTolAllowed
property in object FTASettingAtt
Returns or sets the Non Semantic Tol Allowed parameter.
Normal
property in object HybridShapeProject
Returns or sets the direction option.
NormalAxisDirReverse
property in object Sweep
Returns the Sweep NormalAxisDirReverse flag (for Sweep Move Profile only).
NotWireBoundaryMonoDimFeatVertex
object
0-D boundary belonging to a feature whose topological result is one dimensional, the boundary not beeing the extremity of the feature.
NumCpus
property in object ABQJob
Sets or returns the number of CPUs to use for this analysis.
NumExclusionRegions
property in object ABQRigidCoupling
Returns the number of currently active exclusion regions.
NumExclusionRegions
property in object ABQSmoothCoupling
Retrieves the number of currently active exclusion regions.
NumInsertedWires
property in object EHMInsertionActPlugMapViewData
Gets the number of inserted wires.
NumPinSupports
property in object ABQRigidBodyConstraint
Gets the number of pin point supports for the rigid body.
NumSupports
property in object ABQMassScaling
Retrieves the number of supports.
NumSupports
property in object ABQRigidCoupling
Returns the number of supports.
NumSupports
property in object ABQSmoothCoupling
Retrieves the number of supports.
NumTieSupports
property in object ABQRigidBodyConstraint
Gets the number of tie point supports for the rigid body.
NumUrlName
property in object N4DNavigatorSettingAtt
Returns or sets the name activation state for Hyperlink (TRUE the hyperlink name is displayed, FALSE the hyperlink name is not displayed).
Number
property in object ManufacturingToolCorrector
Gives the corrector number.
NumberOfAssignedProcesses
method in object Fastener
eturns Number of processes assigned with the fastener Example: Dim Num Num = MyFastener.
NumberOfAttributes
property in object ManufacturingTool
Give the Number og attributes of a Manufacturing Tool.
NumberOfAttributes
property in object ManufacturingInsert
Give the Number of attributes of an insert object.
NumberOfAttributes
property in object ManufacturingMachine
Gives the number of attributes of a ManufacturingMachine.
NumberOfAttributes
property in object ManufacturingToolAssembly
Returns the number of attributes of a tool assembly.
NumberOfColumns
property in object DrawingTable
Returns the number of columns of a drawing table.
NumberOfElements
property in object HybridShapePolyline
Returns the number of elements of the polyline.
NumberOfFeedrateAttributes
property in object ManufacturingActivity
This property returns the number of Feedrate attributes of a Manufacturing Activity.
NumberOfGeomAttributes
property in object ManufacturingActivity
This property returns the number of Geometry attributes of a Manufacturing Activity.
NumberOfJoiningParts
method in object Fastener
Returns the number of parts joined by fastener.
NumberOfJoiningParts
method in object FastenerGroup
Returns the number of parts joined by the fastener group.
NumberOfMinimumFPS
property in object VisualizationSettingAtt
Returns the NumberOfMinimumFPS parameter.
NumberOfMinimumSpaceFPS
property in object VisualizationSettingAtt
Returns the NumberOfMinimumSpaceFPS parameter.
NumberOfNumericalControlAttributes
property in object ManufacturingMachine
This property returns the number of Numerical Control attributes of a Manufacturing Machine.
NumberOfRotaryTableAttributes
property in object ManufacturingMachine
This property returns the number of rotary table attributes of a Manufacturing Machine.
NumberOfRows
property in object DrawingTable
Returns the number of rows of a drawing table.
NumberOfSpindleAttributes
property in object ManufacturingMachine
This property returns the number of Spindle attributes of a Manufacturing Machine.
NumberOfStrategyAttributes
property in object ManufacturingActivity
This property returns the number of Strategy attributes of a Manufacturing Activity.
NumberOfToolChangeAttributes
property in object ManufacturingMachine
This property returns the number of Tool change attributes of a Manufacturing Machine.
OKToBranch
method in object SchRoute
Query whether it is OK to create a branch.
OKToBreak
method in object SchRoute
Query whether it is OK to break.
OKToConcatenate
method in object SchRoute
Query whether it is OK to concatenate.
OKToConnect
method in object SchCntrConnect
Query whether 'this' connector can be connected to the specified connector, that is, whether their positions are coincident.
OKToFlipConnected
method in object SchComponent
Query whether it is OK to connect the component via next compatible connectors.
OKToFlipHorizontal
method in object SchComponent
Query whether it is OK to flip the component about the horizontal axis.
OKToFlipOnLine
method in object SchComponent
Query whether it is OK to flip the component about the inserted route segment.
OKToFlipVertical
method in object SchComponent
Query whether it is OK to flip the component about vertical axis.
OKToModifyPoints
method in object SchRoute
Query whether it is OK to modify (add or remove) the points.
OKToPlaceInSpace
method in object SchComponent
Query whether the component can be placed in free space.
OKToScale
method in object SchComponent
Query whether it is OK to scale the component.
OKToSlide
method in object SchComponent
Query whether the component can be slided.
OKToUninsert
method in object SchComponent
Query whether it is OK to uninsert the component.
OLPTranslator
object
Represents the Offline Programming Translator object.
OWNER
property in object PCBArea
Object
property in object Sampled
Returns or sets the Sampled object.
Object
property in object HybridShapeDirection
Returns or sets the object that specifies the direction.
ObjectiveParameter
property in object Optimization
Returns or sets the objective parameter of the optimization.
Objects
property in object FunctionalDescription
Get the Objects collection.
ObjectsToFillet
property in object ConstRadEdgeFillet
Returns the collection of reference elements to be filleted.
Obtention
property in object Roughness
Retrieves or sets roughness obtention mode.
OcclusionCullingMode
property in object VisualizationSettingAtt
Returns the OcclusionCullingMode parameter.
Offset
property in object Thickness
Returns the thickness offset.
Offset
property in object StrPlate
Returns the offset between the given support and the support of the plate.
Offset
property in object StrCutback
Returns the parameter defining the offset.
Offset
property in object HybridShapeCurvePar
Returns the offset parameter of the curve parameter object.
Offset
property in object HybridShapePlaneOffset
Returns the offset value.
Offset
property in object HybridShapePointOnCurve
Returns the distance to the reference point.
Offset
property in object StrMemberExtremity
Returns the offset parameter defined on this extremity.
Offset
property in object HybridShapePointOnSurface
Returns the geodesic length.
Offset2
property in object HybridShapeCurvePar
Returns the second offset parameter of the curve parameter object.
OffsetDirection
property in object HybridShapeOffset
Returns or sets whether the offset direction is to be inverted.
OffsetShapeName
method in object DMOOffsets
Returns the name of the associated shape.
OffsetSide
property in object ThickSurface
Returns the offset direction (defines in regards of the normal direction) .
OffsetValue
property in object HybridShapeOffset
Returns or sets the offset value.
OffsetValue
property in object HybridShape3DCurveOffset
Returns or sets the OffsetValue.
OffsetedObject
property in object HybridShapeOffset
Returns or sets the face to offset.
Offsets
property in object OptimizerWorkBench
Returns Offsets.
OnCurveType
property in object HybridShapePointOnCurve
Returns or sets the OnCurve type for created point on curve.
OnVertex
property in object HybridShapeCorner
Returns or sets the On Vertex mode off/on.
OnlyCurrentOperatedSolidSetInGeometry
property in object PartInfrastructureSettingAtt
Returns or sets the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
OnlyCurrentSolidSetInGeometry
property in object PartInfrastructureSettingAtt
Returns or sets the "OnlyCurrentSolidSetInGeometry" parameter.
OnlyLoadCtxWithGeometry
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the OnlyLoadCtxWithGeometry parameter.
OnlyShow
property in object IgesSettingAtt
Returns or sets the Export only show setting parameter value.
OpaqueFaces
property in object VisualizationSettingAtt
Returns the SetStereoModeLock parameter.
Open
method in object Documents
Opens a document stored in a file.
OpenAsTextStream
method in object File
Opens the file and retrieves it as a TextSteam object.
OpenEdition
method in object Sketch
Opens the Sketch Edition.
OpenModeForLoad
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the OpenModeForLoad attribute.
OperatingSystem
property in object SystemConfiguration
Returns a string which identifies the operating system on which the application is currently running.
Operation
object
Represents an Operation.
OperationProfile
object
Represents an Operation.
OptC2Mode
property in object IgesSettingAtt
Returns or sets the Continuity Optimization Mode setting parameter value.
OptCleanTopoMode
property in object IgesSettingAtt
Returns or sets the clean topo mode setting parameter value.
OptFittingMode
property in object IgesSettingAtt
Returns or sets the Fitting Mode setting parameter value.
OptInvalidGeomMode
property in object IgesSettingAtt
Returns or sets the InvalidGeom mode setting parameter value.
OptLoop3DMode
property in object IgesSettingAtt
Returns or sets the Force 3D Loop setting parameter value.
Optimization
object
Represents an Optimization object.
OptimizationConstraint
object
Represents an optimization constraint.
OptimizationConstraints
object
Represents a collection of Optimization Constraint.
OptimizationType
property in object Optimization
Returns or sets the type of the optimization: minimum, maximum or target value searched on the objective parameter.
Optimizations
object
Represents a collection of optimization features.
Optimizations
property in object Relations
Returns the optimization collection.
OptimizerWorkBench
object
OptionalRelation
property in object Parameter
Returns the relation that can be used to compute the parameter.
OrderAndCreateMOfromReport
method in object ManufacturingProgram
Create a list of Operation in a Manufacturing Program, of a specified type.
OrderGenerator
object
Interface representing Create Shop Order APIs which generates Shop Order Instance(SOI), against user-given option(s).
OrderedGeometricalSet
object
The object is an ordered geometrical set.
OrderedGeometricalSets
object
A collection of the OrderedGeometricalSet objects.
OrderedGeometricalSets
property in object Part
Returns the collection object containing the ordered geometrical sets of the part.
OrderedGeometricalSets
property in object Body
Returns the body's OrderedGeometricalSets collection.
OrderedGeometricalSets
property in object OrderedGeometricalSet
Returns the ordered geometrical set's OrderedGeometricalSets collection.
OrderedSketches
property in object OrderedGeometricalSet
Returns the ordered geometrical set's Sketches collection.
Orientation
property in object Printer
Returns or sets the default paper orientation.
Orientation
property in object Chamfer
Returns or sets the chamfer orientation.
Orientation
property in object PageSetup
Returns or sets the paper orientation.
Orientation
property in object Constraint
Returns or sets the constraint orientation.
Orientation
property in object HybridShapeSpine
Gets or Sets the orientation.
Orientation
property in object HybridShapeRevol
Gets or sets orientation of the revolution.
Orientation
property in object HybridShapeSplit
Returns or sets the orientation used to compute the split.
Orientation
property in object DrawingSheet
Returns or sets the paper orientation.
Orientation
property in object HybridShapeInverse
Gets or sets the element's orientation.
Orientation
property in object HybridShapeExtrude
Gets or sets orientation of the extrude.
Orientation
property in object HybridShapeCylinder
Returns or sets the the inversion of extrusion direction.
Orientation
property in object RenderingMaterial
Returns or sets the texture orientation.
Orientation
property in object HybridShapeLinePtDir
Returns or Sets the line orientation.
Orientation
property in object HybridShapeLineAngle
Role : Get the line orientation.
Orientation
property in object HybridShapeThickness
Returns or sets the orientation.
Orientation
property in object Layout2DSheet
Returns or sets the paper orientation.
Orientation
property in object HybridShapePlaneAngle
Returns or sets the plane orientation.
Orientation
property in object HybridShapeLineNormal
Returns or Sets the line orientation.
Orientation
property in object HybridShapePlaneOffset
Returns or sets the plane orientation.
Orientation
property in object TreeVizManipSettingAtt
Retrieves or Sets the orientation applied to the specification tree.
Orientation
property in object MechanismCommand
Orientation
property in object HybridShapeLineTangency
Returns or Sets the line orientation.
Orientation
property in object HybridShapePointOnCurve
Returns or sets the curve orientation.
Orientation
property in object HybridShapePointBetween
Returns or sets the orientation.
Orientation
property in object HybridShapeLineBisecting
Returns or sets the orientation used to compute the bisecting line.
Orientation
property in object HybridShapeCircle2PointsRad
Returns or sets the circle orientation.
Orientation1
property in object HybridShapeCircleTritangent
Returns or sets the orientation of the first curve to which the circle is tangent.
Orientation1
property in object HybridShapeCircleCenterTangent
Returns or sets the orientation of the first curve to which the circle is tangent.
Orientation1
property in object HybridShapeCircleBitangentPoint
Returns or sets the orientation of the first curve to which the circle is tangent.
Orientation1
property in object HybridShapeCircleBitangentRadius
Returns or sets the orientation of the first curve to which the circle is tangent.
Orientation2
property in object HybridShapeCircleTritangent
Returns or sets the orientation of the second curve to which the circle is tangent.
Orientation2
property in object HybridShapeCircleCenterTangent
Returns or sets the orientation of the second curve to which the circle is tangent.
Orientation2
property in object HybridShapeCircleBitangentPoint
Returns or sets the orientation of the second curve to which the circle is tangent.
Orientation2
property in object HybridShapeCircleBitangentRadius
Returns or sets the orientation of the second curve to which the circle is tangent.
Orientation3
property in object HybridShapeCircleTritangent
Returns or sets the orientation of the third curve to which the circle is tangent.
OrientationDirection
property in object FunctionalAction
Get the OrientationDirection property.
OrientationDirection
property in object HybridShapeReflectLine
Returns or sets the direction orientation used to compute the reflect line.
OrientationOfFirstElement
property in object HybridShapeRotate
Returns or sets the orientation of the first element defining the rotation angle.
OrientationOfSecondElement
property in object HybridShapeRotate
Returns or sets the orientation of the second element defining the rotation angle.
OrientationSupport
property in object HybridShapeReflectLine
Returns or sets the support orientation used to compute the reflect line.
Origin
property in object Axis2D
Returns the 2D coordinate system origin.
Origin
property in object HybridShapeReflectLine
Returns or sets the origin point used to create the conical reflectline.
Origin
property in object HybridShapeExtremumPolar
returns or sets the origin of the polar axis.
Origin
property in object ManufacturingMachiningAxis
This property returns the interface which manages if instruction os used as an Origin or as a Machining Axis System.
OriginElements
object
Represents the part's 3D reference axis system.
OriginElements
property in object Part
Returns the object defining the part 3D reference axis system.
OriginGroup
property in object ManufacturingMachiningAxis
This property returns the interface which determines the origin group of the instruction if used a an Origin.
OriginNumber
property in object ManufacturingMachiningAxis
This property returns the interface which manages the origin number of the instruction if used a an Origin.
OriginPoint
property in object AxisSystem
Returns or sets the geometric point which defines the origin of the axis system.
OriginToUnfold
property in object HybridShapeUnfold
Returns or sets the origin to unfold.
OriginType
property in object AxisSystem
Returns or sets the way the origin point is defined.
OriginalDescription
property in object FunctionalVariant
Returns the Original Description the Variant comes from.
OriginalDescription
property in object FunctionalDocument
Returns the Original Description.
OtherSelectionTimeout
property in object VisualizationSettingAtt
Returns the OtherSelectionTimeout parameter.
OtherSelectionTimeoutActivity
property in object VisualizationSettingAtt
Returns the OtherSelectionTimeoutActivity parameter.
OtherSide
property in object HybridShapeCurvePar
Returns the other side of parallel curve if both sides mode is on.
OutPutParameters
property in object AnalysisSensor
Returns the collection object containing the sensor parameters.
Output
property in object GeneralStatisticsSettingAtt
Returns or sets the output format of the statistics thematic.
OutputFile
property in object GeneralStatisticsSettingAtt
Returns or sets the path of the statistics thematic file.
OutputFormat
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the output format field.
OutputHeight
property in object RenderingSettingAtt
Returns or sets the OutputHeight parameter.
OutputPath
property in object RenderingSettingAtt
Returns or sets the OutputPath parameter.
OutputPath
property in object MultiCADSettingAtt
OutputProductFilter
property in object TreeTabSettingAtt
OutputProducts
property in object Resource
OutputSizeFrom
property in object RenderingSettingAtt
Returns or sets the OutputSizeFrom parameter.
OutputType
property in object RenderingSettingAtt
Returns or sets the OutputType parameter.
OutputWidth
property in object RenderingSettingAtt
Returns or sets the OutputWidth parameter.
Outputs
object
The collection of outputs related to the current activity.
Outputs
property in object Activity
OutputsCount
property in object ShapeInstance
Returns the number of Outputs.
OutputsCount
property in object HybridShapeInstance
Returns the number of Outputs.
Overline
property in object DrawingTextProperties
Returns or sets the drawing text font overline property.
Owner
property in object PCBBoard
PCBArea
object
PCBBoard
object
PCBComponent
object
PCBHoleAndPattern
object
PCBObject
object
PCBWorkbench
object
Interface to access Circuit Board Design workbench object.
PCSStatisticsSettingAtt
object
Interface for PCS statistic Controler Role : the PCS statistics controler manages the values of all or only a part of the attributes available for the thematic.
POWEROPR
property in object PCBComponent
POWER_MAX
property in object PCBComponent
Allow to get and set the POWER MAX of a component.
PPRActivity
object
The interface is used to retrieve the items and resources of the current Activity.
PPRDocument
object
This interface is used to access Processes, Products and Resources.
PPRDocument
property in object ProcessDocument
Retrieves the interface which manages the PPRDocument.
PPRItems
property in object PPRActivity
Retrieves the list of items as Products aggregated by the Activity.
PPRProducts
object
This interface is used to retrieve and add Products from and to the list of Products.
PPRResources
property in object PPRActivity
Retrieves the list of resources as Products aggregated by the Activity.
PPRSaveConfig
property in object Export3DXmlSettingAtt
Returns or sets the PPR config.
PPTableName
property in object ManufacturingMachine
Give the PPTableName linked to a Manufacturing Machine.
PROJECT_File_Path
property in object InteropSettingAtt
Retrieves or sets the value of the "PROJECT File Path" setting parameter.
PSCycleTime
property in object SimulationSettingAtt
Returns or sets the PSCycleTime setting attribute value.
PSDynClashMode
property in object SimulationSettingAtt
Returns or sets the PSDynClashMode setting attribute value.
PSGraphicSimStep
property in object SimulationSettingAtt
Returns or sets the PSGraphicSimStep setting attribute value.
PSGraphicUpdate
property in object SimulationSettingAtt
Returns or sets the PSGraphicUpdate setting attribute value.
PVEndCondition
property in object SimulationSettingAtt
Returns or sets the PVEndCondition setting attribute value.
PVStateMgt
property in object SimulationSettingAtt
Returns or sets the PVStateMgt setting attribute value.
PackAndGoRepositoryPath
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the PackAndGoRepositoryPath attribute.
PackageNumber
property in object PCBComponent
Pad
object
Represents the pad shape.
PageSetup
object
Represents the page setup.
PageSetup
property in object Window
Returns or sets the page setup of the window.
PageSetup
property in object DrawingSheet
Returns the page setup.
PageSetup
property in object Layout2DSheet
Returns the page setup.
PaperHeight
property in object Printer
Returns the default paper height.
PaperHeight
property in object PageSetup
Returns or sets the paper height.
PaperHeight
property in object Layout2DSheet
Gets or Sets the paper width of the layout sheet.
PaperName
property in object Layout2DSheet
Returns or sets the paper format name.
PaperSize
property in object Printer
Returns the default paper size.
PaperSize
property in object PageSetup
Returns or sets the paper size.
PaperSize
property in object DrawingSheet
Returns or sets the paper size.
PaperSize
property in object Layout2DSheet
Returns or sets the paper size.
PaperWidth
property in object Printer
Returns the default paper width.
PaperWidth
property in object PageSetup
Returns or sets the paper width.
PaperWidth
property in object Layout2DSheet
Gets or Sets the paper width of the layout sheet.
Parabola2D
object
Class defining an parabola in 2D Space.
ParallelMethodStd_Type
enum
Direct solver parallel equation solution method.
ParallelizationMethodStandard
property in object ABQJob
Sets or returns the parallelization method for the Abaqus/Standard direct solver.
Parameter
object
Represents the parameter.
Parameter
property in object FreeParameter
Returns or sets which parameter (CATIAParameter) is linked to this object.
Parameter
property in object HybridShapeSweepConic
Returns or sets the parameter for conic sweep operation.
ParameterLaw
property in object HybridShapeSweepConic
Returns or sets the parameter law useful in conic sweep operation.
ParameterLawInversion
property in object HybridShapeSweepConic
Returns or sets the parameter law inversion flag of conic sweep operation.
ParameterLawType
property in object HybridShapeSweepConic
Returns or sets the parameter law type in conic sweep operation.
ParameterNameSurroundedByTheSymbol
property in object KnowledgeSheetSettingAtt
Returns or sets the ParameterNameSurroundedByTheSymbol parameter.
ParameterOnDefinition
property in object HybridShapeLawDistProj
Queries whether evolution parameter is on reference curve (default) or on definition curve,or sets evolution parameter on reference curve or on definition curve.
ParameterProfiles
object
Interface to manage an user-defined applicative parameter profile.
ParameterProfilesFactory
object
Interface to manage an user-defined applicative parameter profile(s) defined on a robot controller.
ParameterSet
object
Represents parameter set.
ParameterSets
object
Represents a collection of parameter sets.
ParameterSets
property in object ParameterSet
Returns the children parameter sets.
ParameterTreeViewWithFormula
property in object KnowledgeSheetSettingAtt
Returns or sets the ParameterTreeViewWithFormula parameter.
ParameterTreeViewWithValue
property in object KnowledgeSheetSettingAtt
Returns or sets the ParameterTreeViewWithValue parameter.
Parameters
property in object Part
Returns the collection object containing the part parameters.
Parameters
property in object Activity
This property returns the interface which manages the knowlegde parameters of the activity.
Parameters
object
Represents the Parameters collection of the part or the product.
Parameters
property in object DrawingRoot
Returns the collection of parameters of the drawing document.
Parameters
property in object DrawingDocument
Returns the collection of parameters of the drawing document.
Parameters
property in object Layout2DRoot
Returns the collection of parameters of the layout.
Parameters
property in object FunctionalElement
Returns the parameters collection.
Parameters
property in object DrawingDimension
Returns the collection of parameters of the dimension.
Parameters
property in object AnalysisManager
Returns the collection object containing the analysis parameters.
Parameters
property in object Product
Returns the collection object containing the product parameters.
ParametersCount
property in object ShapeInstance
Returns the number of Parameters.
ParametersCount
property in object HybridShapeInstance
Returns the number of Parameters.
ParametersInTree
property in object FTASettingAtt
Returns or sets the Parameters in tree parameter.
ParametersNodeInTree
property in object PartInfrastructureSettingAtt
Returns or sets the "ParametersNodeInTree" parameter.
Parent
property in object AnyObject
Returns the parent object.
Parent
property in object Collection
Returns the parent object.
ParentFolder
property in object FileComponent
Returns or sets the parent folder of the file.
ParentView
property in object DrawingViewGenerativeBehavior
Returns the parent view.
Parse
method in object ExpertRuleBaseComponentRuntime
Syntactically analyses (ie parses) the component.
Part
property in object PCBBoard
set the pad of a Board or a component or a panel.
Part
object
The root level object inside a PartDocument object.
Part
property in object PartDocument
Returns the root Part object from the current part document.
PartCatalogName
property in object PspFunctional
Returns Part catalog name of physical object that realizes this function.
PartComp
object
PartComps
object
PartComps
property in object OptimizerWorkBench
Returns PartComps.
PartDocument
object
Represents the Document object for parts.
PartInfrastructureSettingAtt
object
Setting controller for all the Part Infrastructure property tab pages.
PartNumber
property in object PspFunctional
Returns part number of physical object that realizes this function.
PartNumber
property in object Product
Returns or sets the product's part number.
PartProdMode
property in object IgesSettingAtt
Returns or sets the Import Product mode setting parameter value.
PartType
property in object PspFunctional
Returns the part type of physical object that realizes this function.
PartUpdateStatus
property in object MeasureSettingAtt
Returns or sets the PartUpdateStatus parameter .
ParticularGeometry
property in object ParticularTolElem
Retrieves particular geometry of the toleranced element.
ParticularTolElem
object
Interface for accessing particular geometry of the toleranced element.
ParticularTolElem
method in object Annotation
Get the annotation on the ParticularTolElem interface.
PartingElement
property in object Draft
Returns or sets the draft parting element.
PartingElement
property in object AutoDraft
Returns or sets the parting element.
PartingElement
property in object AutoFillet
Returns or sets the parting element.
PartsParameterMode
property in object MultiCADSettingAtt
PassingPoint
property in object HybridShapeCurvePar
Returns or sets the passing point of the curve parameter object.
Paste
method in object Selection
Puts the contents of the clipboard in the document at the indicated location.
PasteComponentMode
property in object AsmConstraintSettingAtt
Returns or sets the component paste setting parameter.
PasteSameInstance
property in object TreeTabSettingAtt
PasteSpecial
method in object Selection
Puts the contents of the clipboard in the document at the indicated location, according to the specified format.
Path
property in object Document
Returns the document's file path.
Path
property in object Application
Returns the path of the application's executable files.
Path
property in object FileComponent
Returns the full path of the file.
PathESSRessourcesSettingAtt
object
The interface to access a CATIAPathESSRessourcesSettingAtt.
PathFinderSmooth
property in object FittingSettingAtt
PathSeparator
property in object FileSystem
Returns the path separator string.
Pattern
object
Represents the pattern shape.
PenaltyMethod
property in object ABQMechConnBehavior
Sets or returns the penalty method formulation in a mechanical connection.
Perimeter
property in object Measurable
Returns the perimeter of a surface.
Period
property in object Curve2D
Returns the period of a periodic curve.
PertNode
object
This Interface represents a PertNode in the PERT Chart.
Physicals
property in object PspSpatial
Returns all physical objects associated to this spatial object.
Physicals
property in object PspFunctional
Returns a list of all associated physical objects.
PickActivity
object
The object that represents an PickActivity.
PickType
property in object PickActivity
PickingHand
property in object PickActivity
PickingWindowSize
property in object VisualizationSettingAtt
Returns the PickingWindowSize parameter.
Picture
property in object Marker2D
Returns or sets the path to a picture file for a picture Marker2D.
Picture
property in object ManufacturingTool
Return the path where a picture of the parametrized tool is stored.
Pictures
property in object DrawingView
Returns the drawing picture collection of the drawing view.
Pictures
property in object Layout2DView
Returns the drawing picture collection of the Layout2D view.
Pitch
property in object Thread
Returns the thread/tap pitch.
Pitch
property in object HybridShapeHelix
Reads the pitch of the Helix.
Pitch
property in object HybridShapeSpiral
Reads the pitch of the Spiral.
Pitch2
property in object HybridShapeHelix
Reads the Helix pitch2.
PitchLawType
property in object HybridShapeHelix
Reads / Changes the Helix pitch law type.
PitchLawType
property in object HybridShapeIntegratedLaw
Gets or sets pitch law type.
PlaceActivity
object
The object that represents an PlaceActivity.
PlaceInSpace
method in object SchComponent
Place a component in space, unconnected to other objects.
PlaceInSpace
method in object SchComponent2
Place a component in space, unconnected to other objects.
PlaceOnComponentWithInfo
method in object SchComponent
Place a component connected to another component.
PlaceOnObject
method in object SchComponent
Place a component connected to another component or insert into a route.
PlaceOnObject
method in object SchComponent2
Place a component connected to another component or insert into a route.
PlacePartInSpace
method in object PspPlacePart
Places a part in space.
PlanarFace
object
2-D boundary with a planar geometry.
Plane
object
Represents the hybrid shape Plane feature object.
Plane
property in object HybridShapePlaneAngle
Returns or sets the reference plane.
Plane
property in object HybridShapePlaneOffset
Returns or sets the reference plane.
Plane
property in object HybridShapePointOnPlane
Returns or sets the support plane.
Plane
property in object HybridShapePlaneOffsetPt
Role : Get the reference plane.
PlaneAxisDirection
property in object HybridShapeDevelop
Returns or sets the direction corresponding to the first axis of the planar axis system related to the planar 2D wire.
PlaneAxisOrigin
property in object HybridShapeDevelop
Returns or sets the point designated as the origin of the planar 2D wire.
PlaneNormal
property in object SectioningSettingAtt
Returns or sets the PlaneNormal parameter.
PlaneOnlyMode
property in object HybridShapeFill
Returns or sets whether Planar Boundaries only should be considered during fill operation.
PlaneOrigin
property in object SectioningSettingAtt
Returns or sets the PlaneOrigin parameter.
PlaneXY
property in object OriginElements
Returns the XY plane of the part 3D reference axis system.
PlaneYZ
property in object OriginElements
Returns the YZ plane of the part 3D reference axis system.
PlaneZX
property in object OriginElements
Returns the ZX plane of the part 3D reference axis system.
PlateMaterial
property in object MaterialESSObjectSettingAtt
Returns or sets the PlateMaterial parameter.
PlateTypes
property in object TypeESSObjectSettingAtt
Returns or sets the PlateTypes parameter.
PlatingStyle
property in object PCBHoleAndPattern
PlugMapViewSettingAtt
object
Interface representing xxx.
Pocket
object
Represents the pocket shape.
Point
object
Represents the hybrid shape Point feature object.
Point
property in object HybridShapeLinePtDir
Returns or Sets the starting point of the line.
Point
property in object HybridShapeLineAngle
Role : Get the starting point of the line.
Point
property in object HybridShapeLineNormal
Returns or Sets the starting point of the line.
Point
property in object HybridShapePlaneNormal
Role : Get the point where the plane is to be normal.
Point
property in object HybridShapePointOnPlane
Returns or sets the reference point.
Point
property in object HybridShapePlane1Line1Pt
Return or sets the passing point.
Point
property in object HybridShapePlaneTangent
Role : Get the tangency point.
Point
property in object HybridShapeLineTangency
Returns or Sets the starting point of the line.
Point
property in object HybridShapePointOnCurve
Returns or sets the reference point.
Point
property in object StrMemberExtremity
Returns the point defining the extremity.
Point
property in object HybridShapePlaneOffsetPt
Role : Get the reference point.
Point
property in object HybridShapePointOnSurface
Returns or Sets the reference point.
Point
property in object HybridShapeCircleCenterAxis
Returns or sets the Point of the circle.
Point
property in object ManufacturingToolCorrector
Gives the corrector type point.
Point2D
object
Class defining a point in 2D Space.
PointFastener
object
Interface DELMIAPointFastener DELMIAPointFastener represent body in white fasteners of type point.
PointFasteners
method in object FastenerWorkBench
PointOnSupport
property in object HybridShapeDevelop
Returns or sets the development origin on the support surface.
PointType
property in object HybridShapeIntersection
Returns or sets the PointType flag for intersect.
PointedGeometryCount
method in object ManufacturingMachinableGeometry
Returns the pointed geometry list count.
PointsProjectionMode
property in object DrawingViewGenerativeBehavior
Returns or sets projection mode for 3D points.
PointsSymbol
property in object DrawingViewGenerativeBehavior
Returns or sets symbol for projected points.
Position
object
Represents the position object.
Position
property in object Shuttle
Returns the shuttle's position object.
Position
property in object SceneProductData
Returns the scene product's position object.
Position
property in object ProjectedToleranceZone
Retrieves position of the projected tolerance zone (in millimeters).
Position
property in object Product
Returns the product's position object.
PositionMode
property in object HybridShapeSweepExplicit
Returns or sets positioning mode.
PositionTolerance
property in object ABQFastenedPair
Sets or returns the position tolerance.
PositionTolerance
property in object ABQFastenedConnectionEnhancement
Sets or returns the position tolerance.
PositionToleranceVal
property in object ABQFastenedPair
Sets or returns the position tolerance value.
PositionToleranceVal
property in object ABQFastenedConnectionEnhancement
PositionTolerance_Type
enum
Position Tolerance types.
PositionU
property in object RenderingMaterial
Returns or sets the texture position along U axis.
PositionV
property in object RenderingMaterial
Returns or sets the texture position along V axis.
PositionedMaterial
object
Represents a Positioned Material object.
PositionedProfile
property in object HybridShapeSweepExplicit
Returns or sets the positioning transformation associated to the explicit swept surface and which result corresponds to the positioned profile.
PositionedWire
property in object HybridShapeDevelop
Returns or sets the positioning transformation.
PositiveDirectionOrientation
property in object HybridShapeLawDistProj
Returns or sets the positive value direction.
PossiblePrecedenceActivities
property in object Activity
This property returns list of Possible Precedence Activities defined on Current Activity.
PostManager
property in object AnalysisModel
Returns the Postprocessing manager defined on the analysis model.
PostProcessorFile
property in object ManufacturingMachine
This property returns the post processor file of a Manufacturing Machine Machine.
PostReplaceText
method in object SchPostReplace
Handle associated annotations after replace.
PreSelectionMode
property in object VisualizationSettingAtt
Returns the PreSelectionMode parameter.
PrecedenceActivities
property in object Activity
This property returns list of Precedence Activities defined on Current Activity.
PrecedenceType
property in object ManufacturingPrecedence
Returns the type of the precedence.
Precedences
property in object ManufacturingActivity
This property returns the interface which manages the precedences on the operation.
Precision
property in object OptimizationConstraint
Returns or sets the constraint precision.
PreferedToolCatalogName
property in object ManufacturingMachine
Give the PreferedToolCatalogName linked to a Manufacturing Machine.
PreselectedElementLinetype
property in object VisualizationSettingAtt
Returns the PreselectedElementLinetype parameter.
Presentation
property in object Export3DXmlSettingAtt
PressureOverclosure
property in object ABQMechConnBehavior
Sets or returns the pressure overclosure in a mechanical connection.
PressureOverclosure_Type
enum
Pressure overclosure types.
PrevArea
property in object DMUTolSettingAtt
Returns or sets the Preview Area setting parameter value.
PrevProcParseTypeForMfgCtx
property in object MfgHubSettingAtt
Retrieves or sets the PrevProcParseTypeForMfgCtx parameter.
PreventBackgroundAccess
property in object DraftingSettingAtt
Returns the PreventBackgroundAccess parameter.
PreventDimDriving3DCstr
property in object DraftingSettingAtt
Returns the PreventDimDriving3DCstr parameter.
PreventFileNew
property in object DraftingSettingAtt
Returns the PreventFileNew parameter.
PreventGenViewStyle
property in object DraftingSettingAtt
Returns the PreventGenViewStyle parameter.
PreventSetAsDefault
property in object DraftingSettingAtt
Returns the PreventSetAsDefault parameter.
PreventSwitchStandard
property in object DraftingSettingAtt
Returns the PreventSwitchStandard parameter.
PreventTrueDimensionCreation
property in object DraftingSettingAtt
Returns the PreventTrueDimensionCreation parameter.
PreventUpdateStandard
property in object DraftingSettingAtt
Returns the PreventUpdateStandard parameter.
PreventViewGeomUpgrade
property in object DraftingSettingAtt
Returns the PreventViewGeomUpgrade parameter.
PreviewSize
property in object RenderingMaterial
Returns or sets the preview size of a material.
PreviousCFActivities
property in object Activity
This property returns the interface which manages the upstream control flow hierarchy on the activity.
PreviousPRFActivities
property in object Activity
This property returns the interface which manages the upstream product flow hierarchy on the activity.
PreviousResources
property in object Resource
This property returns the interface which manages the upstream product flow hierarchy on the given resource.
Print
method in object SystemService
Prints a string on stdout.
Print
method in object AssemblyConvertor
Extracts the product's contents as a specified format.
PrintArea
object
Manages print area of drawing sheet.
PrintArea
property in object DrawingSheet
Returns the print area definition object.
PrintArea
property in object Layout2DSheet
Returns the print area definition object.
PrintOut
method in object Window
Prints the active viewer of the window according to the window's page setup on the default printer.
PrintOut
method in object DrawingSheet
Prints the drawing sheet according to its page setup on the default printer.
PrintOut
method in object Layout2DSheet
Prints the Layout2D sheet according to its page setup on the default printer.
PrintOut2
method in object Layout2DSheet
Prints the Layout2D sheet according to its page setup on the default printer.
PrintRenderingMode
property in object PageSetup
Returns or sets the printing rendering mode.
PrintToFile
method in object Window
Prints the active viewer of the window according to the window's page setup in a file instead of being sent to a printer.
PrintToFile
method in object DrawingSheet
Prints the drawing sheet according its page setup in a file instead of being sent to a printer.
PrintToFile
method in object Layout2DSheet
Prints the Layout2D sheet according its page setup in a file instead of being sent to a printer.
PrintToFile2
method in object Layout2DSheet
Prints the Layout2D sheet according its page setup in a file instead of being sent to a printer.
Printer
object
Represents a printer handled by the printing subsystem.
Printers
object
A collection of all the Printer objects managed by the application.
Printers
property in object Application
Returns the collection of the printers currently managed by the application.
PrintersSettingAtt
object
Represents a setting controller for the printer settings.
Priority
property in object DocumentationSettingAtt
Returns the contextual priority parameter.
Priority
property in object ExpertRuleRuntime
Returns or sets the priority of the rule.
Priority
property in object ExpertCheckRuntime
Returns or sets the priority of the check.
Priority
property in object SWKIKConstraint
Returns or sets the priority of the constraint.
Prism
object
Prism-based features in Part Design : base for pad or pocket.
ProEInstanceMode
property in object MultiCADSettingAtt
ProEInstanceName
property in object MultiCADSettingAtt
ProEQuiltsRead
property in object MultiCADSettingAtt
ProESimpRepMode
property in object MultiCADSettingAtt
ProESimpRepName
property in object MultiCADSettingAtt
ProcProdRelations
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the ProcProdRelations attribute.
ProcResRelations
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the ProcResRelations attribute.
ProcessDocument
object
This interface is used to access the PPRDocument and to add a new library.
ProcessID
property in object Activity
This property returns process identifier on the current activity.
ProcessType
property in object Fastener
eturns or sets the Process Type as a string.
Processes
property in object PPRDocument
Retrieves the list of Processes as Activities contained in the current document.
Product
property in object PartDocument
Returns the root Product object from the current part document.
Product
object
Represents the product.
Product
property in object ManufacturingSetup
Associate the Product to a Manufacturing Setup.
Product
property in object ProductDocument
Returns the root product.
ProductCount
property in object SystemConfiguration
Returns the number of product names names currently known to the system.
ProductDocument
object
Represents the Document object for product structures.
ProductScene
object
Represent the Product-Scene.
ProductScenes
object
A collection of ProductScenes contained in a given ProductDocument.
ProductUpdateStatus
property in object MeasureSettingAtt
Returns or sets the ProductUpdateStatus parameter .
Products
property in object PPRDocument
Retrieves the list of Products contained in the current document.
Products
object
The collection of the Product objects contained in a given Product object of a ProductDocument object.
Products
property in object Product
Returns the collection of products contained in the current product.
ProductsCount
property in object FixTogether
Returns the number of products fixed together in the FixTogether.
Profil
property in object HybridShapeRevol
Role : To get_Profil on the object.
Profile
property in object HybridShapeHelix
Reads / Changes the Helix profile.
Profile
property in object HybridShapeSweepExplicit
Gets the profile to be swept out.
Profile
property in object HybridShapePositionTransfo
Returns or sets the profile to be positioned.
ProfileType
property in object StrSection
Returns the parameter defining the profile type of the section.
ProfileXAxisComputationMode
property in object HybridShapeSweepExplicit
Returns or sets the computation mode of the X axis (or direction) of the initial axis system (on the profile).
ProfilesNode
property in object SWKManikin
Returns the Profiles node of the current manikin.
Programs
property in object ManufacturingSetup
Give the List of Programs linked to a Manufacturing Setup.
ProjectedToleranceZone
object
Interface for accessing projected tolerance zone informations of a TPS.
ProjectedToleranceZone
method in object Annotation
Get the annotation on the ProjectedToleranceZone interface.
ProjectionDir
property in object HybridShapeBump
Returns or sets the limit curve.
ProjectionMethod
property in object DrawingSheet
Returns or sets the sheet projection mode .
ProjectionMethod
property in object Layout2DSheet
Returns or sets the sheet projection mode .
ProjectionMode
property in object Viewpoint3D
Returns or sets the projection mode.
ProjectionMode
property in object AnnotatedView
Returns the projection mode of the annotated view.
ProjectionMode
property in object HybridShapePlaneAngle
Gets or sets the projection mode status.
ProjectionMode
property in object HybridShapeCircleCenterAxis
Returns or sets the ProjectionMode.
ProjectionSurface
property in object HybridShapePointOnPlane
Returns or sets the projection surface to compute the point.
PropagateHighlight
property in object Layout2DSettingAtt
Returns the PropagateHighlight parameter.
Propagation
property in object Chamfer
Returns or sets the propagation mode of the geometrical elements to be chamfered.
Propagation
property in object RemoveFace
Get the faces that will be removed.
Propagation
property in object HybridShapeBoundary
Returns or sets the boundary propagation.
PropagationMode
property in object HybridShapeExtrapol
Returns or sets the propagation mode.
PropagationType
property in object HybridShapeExtract
Returns or sets the type of propagation for the extract.
Properties
property in object ABQAnalysisModel
Returns the list of Abaqus properties associated with the analysis model.
PspAppFactory
object
Represents the application factory.
PspApplication
object
Represents an application.
PspAttribute
object
Represents Attribute Interface to query Plant Ship objects' attributes.
PspAttributeReport
object
Represents the Attribute Report.
PspBuildPart
object
Represents Interface to create and modify a part.
PspClass
object
Represent Interface to list the start up object classes of an application.
PspCntrFlow
object
Represents Interface to manage Connector Flow property.
PspConnectable
object
Represents an Interface to manage object behaviors in making connections.
PspConnector
object
Represents connector object.
PspFunctional
object
Represents Plant Ship functional object.
PspGroup
object
Represent the Group.
PspGroupable
object
Represent the Groupable object that can be grouped by Group object.
PspID
object
Represents the interface to generate and set IDs for the Distributive System Objects.
PspLightBend
object
Represents the Light bendable object.
PspLightConnector
object
Represents the light connector.
PspLightPart
object
Represents the light part.
PspListOfBSTRs
object
Represents a collection of CATBSTR type of strings.
PspListOfDoubles
object
Represents a collection of double values.
PspListOfLongs
object
Represents a collection of Long values.
PspListOfObjects
object
Represents a collection of Objects.
PspLogicalLine
object
Represents the logical line.
PspObject
object
Represents PspObject.
PspPartConnector
object
Represent the Part Connector to manage the technological data on connectors.
PspPhsyicalProduct
object
Represents the interface to manage the technological connectors on physical objects.
PspPhysical
object
Represents the object to access Plant Ship physical object information.
PspPlacePart
object
Represents the Place physical parts object.
PspResource
object
Represents the PspResource.
PspSpatial
object
Represents the Psp Spatial object.
PspStretchableData
object
Represents the PspStretchableData object.
PspTempListFactory
object
Create temporary (non-persistent) lists to be used in VB environment.
PspWorkbench
object
Represents the PspWorkbench.
Pt
property in object HybridShapeCircleBitangentPoint
Returns or sets the circle passing point.
Pt1
property in object HybridShapeCircle2PointsRad
Returns or sets the circle first passing point.
Pt2
property in object HybridShapeCircle2PointsRad
Returns or sets the circle second passing point.
PtExtremity
property in object HybridShapeLinePtPt
Returns or Sets the extremity point of the LinePtPt(Second Point).
PtOrigine
property in object HybridShapeLinePtPt
Returns or Sets the origin point of the LinePtPt(First point).
PtRef
property in object HybridShapePointCoord
Returns or Sets the reference point for PointCoord feature.
Publication
object
The interface to access a CATIAPublication.
Publications
object
The collection of the Product publications.
Publications
property in object Product
Returns the collection of publications managed by the product.
PublishAutoLaunchBrowser
property in object N4DNavigatorSettingAtt
Returns or sets the activation state of the automatic launching of the publish browser (TRUE the publish browser is automatically opened, FALSE the publish browser is not automatically opened).
PublishTopologicalElements
property in object PartInfrastructureSettingAtt
Returns or sets the "PublishTopologicalElements" parameter.
PullingDirElement
property in object Sweep
Returns or sets the pulling direction .
PullingDirection
property in object AutoDraft
Returns or sets the pulling direction.
PullingDirection
property in object HybridShapeSweepExplicit
Gets or sets the pulling direction If the direction is specified, the plane normal to this direction is taken as reference surface.
PullingDirectionElement
property in object DraftDomain
Returns or sets the draft pulling direction element.
Put3DTextureColor
method in object RenderingMaterial
Sets one color of a 3d texture.
Put3DTextureColorCoefficient
method in object RenderingMaterial
Sets one color coefficient of a 3d texture.
Put3DTextureOrientation
method in object RenderingMaterial
Sets the orientation of a texture.
Put3DTexturePosition
method in object RenderingMaterial
Sets the position of a texture.
Put3DTextureScale
method in object RenderingMaterial
Sets the scale of a texture.
PutAmbientColor
method in object RenderingMaterial
Sets the ambient color of a material.
PutBackFaceCullingMode
method in object VisualizationSettingAtt
Sets the BackFaceCullingMode attribute.
PutBackgroundColor
method in object Viewer
Sets the viewer's background color.
PutColor
method in object RenderingLight
Sets the color of a light.
PutCommandValues
method in object Mechanism
Triggers immediate mechanism solving (motion is NOT applied to the model).
PutCommandValuesWithMultiSteps
method in object Mechanism
Puts command values in given number of steps.
PutDiffuseColor
method in object RenderingMaterial
Sets the diffuse color of a material.
PutDirection
method in object Line
Role : Sets the unit-vector pointing in the direction of the line.
PutDirection
method in object LightSource
Defines the lighting direction as an array of 3 variants.
PutFirstAxis
method in object Plane
Sets the first axis.
PutGrabbedObjects
method in object GrabAct
PutGrabbedObjects
method in object ReleaseAct
PutIcon
method in object Material
Read the icon of a material from JPEG file.
PutInput
method in object ShapeInstance
Defines an input of a shape instance.
PutInput
method in object HybridShapeInstance
Defines an input of a hybrid shape instance.
PutInputData
method in object ShapeInstance
Defines an input of a shape instance.
PutInputData
method in object InstanceFactory
Sets a value to an input of the reference.
PutInputData
method in object HybridShapeInstance
Defines an input of a shape instance.
PutInternal
method in object BehaviorVBScript
provide output of one available io of the behavior.
PutLimits
method in object DimensionLimit
Sets dimension limit values.
PutListOfLibraryFilePath
method in object LibTabSettingAtt
PutOrigin
method in object Plane
Sets the origin of the plane.
PutOrigin
method in object Viewpoint2D
Sets the coordinates of the origin of the viewpoint.
PutOrigin
method in object Viewpoint3D
Sets the coordinates of the origin of the viewpoint.
PutOrigin
method in object AxisSystem
Defines the coordinates X,Y,Z of the origin point of the axis system.
PutOrigin
method in object RenderingLight
Sets the coordinates of the origin of the light.
PutOrigin
method in object RenderingEnvironment
Sets the coordinates of the origin of the environment.
PutOutput
method in object Behavior
Valuates an available output of the behavior.
PutPlaneNormal
method in object HybridShapeCurvePar
Sets the Normal of the plane created when the Support of the curve is not specified.
PutPlaneNormal
method in object HybridShapeLawDistProj
Sets the support plane normal.
PutReleasePath
method in object CacheSettingAtt
Sets the cache release paths.
PutSearch_Mapping_List
method in object MigrBatchSettingAtt
Sets the state of the "Mapping Files Location for Retrieving" setting parameter.
PutSecondAxis
method in object Plane
Sets the coordinates of the second plane axis.
PutSelectionSetIntoCSO
method in object SelectionSets
Puts Selection Set's content in the CSO.
PutShadowColor
method in object RenderingLight
Sets the color of a shadow.
PutSightDirection
method in object Viewpoint3D
Sets the components of the sight direction of the viewpoint.
PutSpecularColor
method in object RenderingMaterial
Sets the specular color of a material.
PutTarget
method in object RenderingLight
Sets the coordinates of the target point of the light.
PutTransparencyColor
method in object RenderingMaterial
Sets the transparent color of a material.
PutUpDirection
method in object Viewpoint3D
Sets the components of the up direction of the viewpoint.
PutValue
method in object AnalysisMaterial
Sets an analysis value of the material.
PutVectors
method in object AxisSystem
Defines the coordinates X,Y,Z of the axes X and Y of the axis system.
PutVerticalAxis
method in object RenderingEnvironment
Sets the coordinates of the vertical axis vector of the environment.
PutXAxis
method in object AxisSystem
Defines the coordinates X,Y,Z of the X axis of the axis system.
PutYAxis
method in object AxisSystem
Defines the coordinates X,Y,Z of the Y axis of the axis system.
PutZAxis
method in object AxisSystem
Defines the coordinates X,Y,Z of the Z axis of the axis system.
p3DSmoothing
property in object HybridShapeProject
Returns or sets the '3D Smoothing' option.
p3DSmoothing
property in object HybridShapeCurvePar
Returns or sets the '3D Smoothing' option.
Quality
property in object PageSetup
Returns or sets the printing quality.
QueryConnectAbility
method in object SchComponent
Find the Schematic component information for placement.
QueryDropAbility
method in object SchCatalogRoute
Check to see if it is OK to be dropped to the current document.
QueryDropAbility
method in object SchCatalogComponent
Check to see if it is OK to be dropped to the current document.
QueryDropCompGroupAbility
method in object SchCatalogComponent
Check to see if it is OK to be dropped a component group to the current document.
QueryNeighbours
method in object OptimizerWorkBench
QuickConstraintMode
property in object AsmConstraintSettingAtt
Returns or sets the quick constraint setting parameter.
Quit
method in object Application
Exits the application and closes all open documents.
RCSDataLibDir
property in object RRSSettingAtt
Gets value of "RCSDATA$LIB" parameter.
RESISTANCE
property in object PCBComponent
Allow to get and set the RESISTANCE of a component.
RRS2ConnectDownloaders
property in object RRSSettingAtt
Gets value of "RRS2ConnectDownloaders" parameter.
RRS2ConsistencyCmdDownloaders
property in object RRSSettingAtt
Gets value of "RRS2ConsistencyCmdDownloaders" parameter.
RRS2ControllerIdentifiers
property in object RRSSettingAtt
Gets value of "RRS2ControllerIdentifiers" parameter.
RRS2DeleteAutoDownloadFilesAfterXfer
property in object RRSSettingAtt
Gets value of "RRS2DeleteAutoDownloadFilesAfterXfer" parameter.
RRS2DfltControllerIdentifier
property in object RRSSettingAtt
Gets value of "RRS2DfltControllerIdentifier" parameter.
RRS2DownloadDuringConnect
property in object RRSSettingAtt
Gets value of "RRS2DownloadDuringConnect" parameter.
RRS2DownloadDuringSimRun
property in object RRSSettingAtt
Gets value of "RRS2DownloadDuringSimRun" parameter.
RRS2DownloadInPartCoordinates
property in object RRSSettingAtt
Gets value of "RRS2DownloadInPartCoordinates" parameter.
RRS2DownloadLogFileName
property in object RRSSettingAtt
Gets value of "RRS2DownloadLogFileName" parameter.
RRS2FreePlaySimStepSize
property in object RRSSettingAtt
Gets value of "RRS2FreePlaySimStepSize" parameter.
RRS2MainTaskProcessing
property in object RRSSettingAtt
Gets value of "RRS2MainTaskProcessing" parameter.
RRS2MotionPlannerActiveDuringTeachOLP
property in object RRSSettingAtt
Gets value of "RRS2MotionPlannerActiveDuringTeachOLP" parameter.
RRS2SimRunDownloaders
property in object RRSSettingAtt
Gets value of "RRS2SimRunDownloaders" parameter.
RRS2StopVRCWhenSimStops
property in object RRSSettingAtt
Gets value of "RRS2StopVRCWhenSimStops" parameter.
RRS2UpdateProgramOnDownload
property in object RRSSettingAtt
Gets value of "RRS2UpdateProgramOnDownload" parameter.
RRS2UseVRCInverseKinematics
property in object RRSSettingAtt
Gets value of "RRS2UseVRCInverseKinematics" parameter.
RRS2UseVRCTurnLimits
property in object RRSSettingAtt
Gets value of "RRS2UseVRCTurnLimits" parameter.
RRSLibDir
property in object RRSSettingAtt
Gets value of "RRS$LIB" parameter.
RRSServerFile
property in object RRSSettingAtt
Gets value of "RRS Servers File" parameter.
RRSSettingAtt
object
Interface to handle parameters of IGRIP RRS Tools Options Tab page Role : This interface is implemented by a component which represents the controller of IGRIP RRS Tools Options parameter settings.
RTIM
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the response time field.
RadialAlignment
property in object CircPattern
Returns or sets whether the copied shapes should be rotated or radial aligned with respect to the original one.
RadialDirectionRow
property in object CircPattern
Returns the position of the shape to be copied along the radial direction.
RadialRepartition
property in object CircPattern
Returns the radial repartition.
Radius
property in object FaceFillet
Returns the face fillet radius.
Radius
property in object Circle2D
Radius
property in object Hyperbola2D
Radius
property in object HybridShapeSphere
Role : Get sphere radius.
Radius
property in object HybridShapeCorner
Returns the corner radius.
Radius
property in object ConstRadEdgeFillet
Returns the edge fillet constant radius.
Radius
property in object HybridShapeCylinder
Returns or sets the radius of the cylinder object.
Radius
property in object Measurable
Returns the radius of an arc, cylinder or sphere.
Radius
property in object RenderingEnvironment
Returns or sets the spherical or cylindrical environment radius value.
Radius
property in object HybridShapeCircleCtrRad
Returns the circle radius.
Radius
property in object HybridShapeExtremumPolar
returns the resulting radius of extremum.
Radius
property in object HybridShapeFilletBiTangent
Returns fillet radius in a CATIALength.
Radius
property in object HybridShapeCircle2PointsRad
Returns the circle radius.
Radius
property in object HybridShapeCircleCenterAxis
Returns the circle radius.
Radius
property in object HybridShapeCircleCenterTangent
Returns the circle radius.
Radius
property in object HybridShapeCircleBitangentRadius
Returns the circle radius.
RadiusLaw
property in object HybridShapeSweepCircle
Returns or sets the radius law feature.
RadiusLawInversion
property in object HybridShapeSweepCircle
Returns or sets the radius law inversion information.
RadiusLawType
property in object HybridShapeSweepCircle
Returns or sets the radius law type.
RadiusNumber
property in object ManufacturingToolCorrector
Gives the corrector radius number.
RadiusType
property in object HybridShapeFilletBiTangent
Returns or Sets fillet radius type.
RadiusValue
property in object HybridShapeFilletBiTangent
Returns or Sets fillet radius value.
RangeMax
property in object IntParam
Returns or sets the value of the upper bound that the parameter object value can take.
RangeMax
property in object RealParam
Returns or sets the value of the upper bound that the parameter object value can take.
RangeMaxValidity
property in object IntParam
Returns or sets the type of the upper bound of the parameter.
RangeMaxValidity
property in object RealParam
Returns or sets the type of the upper bound of the parameter.
RangeMin
property in object IntParam
Returns or sets the value of the lower bound that the parameter object value can take.
RangeMin
property in object RealParam
Returns or sets the value of the lower bound that the parameter object value can take.
RangeMinValidity
property in object IntParam
Returns or sets the type of the lower bound of the parameter.
RangeMinValidity
property in object RealParam
Returns or sets the type of the lower bound of the parameter.
RasterLevelOfDetail
enum
Precision for views generated as raster (DPI).
Rating
property in object HtsJointSpeedSettingsAtt
Returns or sets the Rating parameter.
Ratio
property in object Scaling2
Returns the scaling ratio.
Ratio
property in object HybridShapeScaling
Returns the scaling ratio.
Ratio
property in object HybridShapePointOnCurve
Returns the distance ratio to the reference point.
Ratio
property in object HybridShapePointBetween
Get the ratio.
RatioValue
property in object Scaling2
Returns or sets the scaling ratio value.
RatioValue
property in object HybridShapeScaling
Returns or sets the scaling ratio value.
RaytracingStatus
property in object RenderingShooting
Returns or sets the the raytracing status for shooting.
ReMountDevice
method in object MountManager
ReachColor
property in object RobAnalysisSettingAtt
Returns or sets the ReachColor parameter.
Read
method in object Documents
Reads a document stored in a file.
Read
method in object TextStream
Returns a string which contains a given number of characters from the current position in the stream.
ReadLine
method in object TextStream
Returns a string which contains a line of charaters from the current position in the stream.
ReadMfgData
method in object ManufacturingSetup
ReadMfgData.
ReadOnly
property in object Document
Returns whether the file containing the document can be read only, on can be read and written.
ReadOnly
property in object Parameter
Returns whether the parameter can be modified.
RealParam
object
Represents the real parameter.
ReboundsCount
property in object RenderingShooting
Returns or sets the maximum number of rebounds levels to take into account for image computation.
RecordMode
property in object ManipSettingAtt
RectPattern
object
Represents the rectangular pattern.
RectangleLightLength
property in object RenderingLight
Returns or sets the light area length.
RectangleLightWidth
property in object RenderingLight
Returns or sets the light area width.
RectilinearBiDimFeatEdge
object
1-D boundary belonging to a feature whose topological result is two dimensional, the boundary having a rectilinear geometry.
RectilinearMonoDimFeatEdge
object
1-D boundary belonging to a feature whose topological result is one dimensional, the boundary having a rectilinear geometry.
RectilinearTriDimFeatEdge
object
1-D boundary belonging to a feature whose topological result is three dimensional, the boundary having a rectilinear geometry.
RedundancyMode
property in object AsmConstraintSettingAtt
Sets redundancy check option for constraint creation.
RefAxisSystem
property in object HybridShapeDirection
Returns or Sets the reference Axis System for Direction feature.
RefAxisSystem
property in object HybridShapeTranslate
Returns or Sets the reference Axis System for Translate feature.
RefAxisSystem
property in object HybridShapePointCoord
Returns or Sets the reference Axis System for PointCoord feature.
RefAxisSystem
property in object HybridShapePlaneEquation
Returns or Sets the reference Axis System for PlaneEquation feature.
RefDoc
property in object GeneralSessionSettingAtt
Returns the referenced documents parameter.
RefPoint
property in object HybridShapeLineBisecting
Returns or sets the reference point used to create the bisecting line.
Reference
object
Represents an object pointing to another object.
Reference
property in object Shuttle
Returns or sets the associated reference object.
Reference
property in object SelectedElement
Returns a Reference version of the Value property.
Reference
property in object HybridShapeSymmetry
Returns or sets the reference element.
Reference
property in object HybridShapeSweepCircle
Returns or sets the reference (functional curve or guide surface).
Reference
property in object HybridShapeLawDistProj
Returns or sets the reference line of the law.
Reference
property in object HybridShapeSweepExplicit
Returns or sets the reference surface (optional).
ReferenceAxis
property in object Constraint
Returns or sets the constraint reference axis.
ReferenceAxis
property in object HybridShapeAxisToAxis
Returns or sets the reference axis.
ReferenceDirectoryForTypes
property in object LanguageSheetSettingAtt
Returns or sets the ReferenceDirectoryForTypes parameter.
ReferenceElement
property in object HybridShapeNear
Role : To get_ReferenceElement on the object.
ReferenceElement
property in object HybridShapeExtremum
Returns or sets the object on which the extremum is detected.
ReferenceFrame
object
Interface designed to manage reference frame associated to a TPS.
ReferenceFrame
method in object Annotation
Get the annotation on the ReferenceFrame interface.
ReferenceFrame
property in object AssociatedRefFrame
Retrieves the Datum Reference Frame associated to a TPS.
ReferenceProduct
property in object Product
Returns the Reference Product of this instance.
ReferenceSurface
property in object HybridShapeWrapSurface
Returns or sets the reference surface of the WrapSurface.
ReferenceSurfaceElement
property in object Sweep
Returns or sets the reference surface .
ReferenceTime
property in object HumanActivityGroup
ReferenceType
property in object Constraint
Returns or sets the constraint reference type.
ReferenceView
property in object DrawingView
Returns or sets the reference view.
ReferenceView
property in object Layout2DView
Returns or sets the reference view.
References
object
A collection of all the references aggregated in an object.
Referential
property in object MoveToPostureActivity
ReflectionHeight
property in object RenderingMaterial
Returns or sets the non-linear reflection height of a material.
ReflectionLength
property in object RenderingMaterial
Returns or sets the non-linear reflection length of a material.
ReflectionMode
property in object RenderingMaterial
Returns or sets the non-linear reflection mode of a material.
ReflectionsCount
property in object RenderingShooting
Returns or sets the maximum number of reflections levels to take into account for image computation.
ReflectivityCoefficient
property in object RenderingMaterial
Returns or sets the reflectivity coefficient of a material.
RefractionCoefficient
property in object RenderingMaterial
Returns or sets the refraction coefficient of a material.
RefractionsCount
property in object RenderingShooting
Returns or sets the maximum number of refractions levels to take into account for image computation.
Reframe
method in object Viewer
Reframes the viewer's contents (Fits all in).
RefreshDisplay
property in object Application
Enables or disables the update of the display during the script replay.
RefreshDisplay
method in object TCPTrace
Refresh display.
RefreshInfo
method in object StiEngine
Refreshes Information concerning all CATIA Documents in session .
Regions
property in object ABQLoad
Returns the region to which the load is applied.
Regions
property in object ABQBoundaryCondition
Returns the region to which the boundary condition is applied.
Relation
object
Represents the relation object.
Relations
property in object Part
Returns the collection object containing the part relations.
Relations
property in object Activity
This property returns the interface which manages the knowlegde relations of the activity.
Relations
object
Represents the collection of relations of the part or the product.
Relations
property in object DrawingRoot
Returns the collection of relations of the drawing document.
Relations
property in object DrawingDocument
Returns the collection of relations of the drawing document.
Relations
property in object Layout2DRoot
Returns the collection of relations of the part document.
Relations
property in object AnalysisManager
Returns the collection object containing the analysis relations.
Relations
property in object Product
Returns the collection object containing the product relations.
Relations
property in object ManufacturingView
Returns the Relations Set owned by a Manufacturing View.
RelationsNodeInTree
property in object PartInfrastructureSettingAtt
Returns or sets the "RelationsNodeInTree" parameter.
RelationsUpdateInPartContextEvaluateDuringUpdate
property in object KnowledgeSheetSettingAtt
Returns or sets the RelationsUpdateInPartContextEvaluateDuringUpdate parameter.
RelationsUpdateInPartContextSynchronousRelations
property in object KnowledgeSheetSettingAtt
Returns or sets the RelationsUpdateInPartContextSynchronousRelations parameter.
Relay
property in object Publication
Valuates a publication object with another publication object.
Release
property in object SystemConfiguration
Returns the CATIA release number.
ReleaseAct
object
Interface representing a Release activity.
ReleasedVoxel
property in object CacheSettingAtt
Returns or sets the released voxel parameter.
Relimitation
property in object HybridShapeLoft
Returns or sets the relimitation type between sections of the loft.
Remove
object
Represents the remove, or substract boolean operation.
Remove
method in object Scenes
Removes a scene from the Scenes collection.
Remove
method in object Cameras
Removes a camera from the Cameras collection.
Remove
method in object Selection
Remove
method in object Outputs
Remove
method in object ABQJobs
Removes an Abaqus Job using its index or its name from the job collection.
Remove
method in object LightSources
Removes a light source from the LightSources collection.
Remove
method in object ABQLoads
Removes a Abaqus load using its index or its name from the collection od loads.
Remove
method in object Shots
Removes a shot from the collection.
Remove
method in object ABQSteps
Removes an Abaqus step using its index or its name from the Step collection.
Remove
method in object Activities
This method removes the specified activity on the current activities management.
Remove
method in object ABQFields
Removes an Abaqus field using its index or its name from the field collection.
Remove
method in object Materials
Removes a material from the materials collection.
Remove
method in object ProductScenes
Removes a product-scene from the ProductScenes collection.
Remove
method in object Sampleds
Removes a CATIASampled object from the CATIASampled collection.
Remove
method in object Shuttles
Remove
method in object List
Removes a Feature from the Features collection.
Remove
method in object Constraints
Removes a constraint from the Constraints collection.
Remove
method in object FixTogethers
Removes a FixTogether from the FixTogethers collection.
Remove
method in object Groups
Removes a group from the Groups collection.
Remove
method in object ABQProperties
Removes a Abaqus property using its index or its name from the property collection.
Remove
method in object Marker2Ds
Removes a marker 2D from the Marker2Ds collection.
Remove
method in object Marker3Ds
Removes a marker 3D from the Marker3Ds collection.
Remove
method in object Joints
Remove a Joint from the Joints collection.
Remove
method in object Relations
Removes a relation from the Relations collection.
Remove
method in object StrPlates
Removes a plate from the Plates collection.
Remove
method in object Parameters
Removes a parameter from the Parameters collection.
Remove
method in object StrMembers
Removes a member from the Members collection.
Remove
method in object Hyperlinks
Removes a Hyperlink from the Hyperlinks collection.
Remove
method in object DrawingViews
Removes a drawing view from the DrawingViews collection.
Remove
method in object Dressups
Removes a Dressup from the Dressups collection.
Remove
method in object DrawingTexts
Removes a drawing text from the DrawingTexts collection.
Remove
method in object ABQMassScalings
Removes the specified entry.
Remove
method in object RenderingLights
Removes a light from the lights collection.
Remove
method in object ABQInteractions
Removes an Abaqus interaction using its index or its name from the Interaction collection.
Remove
method in object DrawingTables
Removes a drawing table from the DrawingTables collection.
Remove
method in object DrawingSheets
Removes a drawing sheet from the DrawingSheets collection.
Remove
method in object DrawingArrows
Removes a drawing arrow from the DrawingArrows collection.
Remove
method in object Mechanisms
Removes a Mechanism from the Mechanisms collection.
Remove
method in object MaterialFamilies
Removes a material family from the MaterialFamilies collection.
Remove
method in object ABQAnalysisCases
Removes an Abaqus analysis case using its index or its name from the collection of Abaqus analysis cases.
Remove
method in object DrawingLeaders
Removes a drawing leader from the DrawingLeaders collection.
Remove
method in object DrawingThreads
Removes a drawing thread from the DrawingThreads collection.
Remove
method in object DrawingWeldings
Removes a drawing welding from the drawing weldings collection.
Remove
method in object DrawingPictures
Removes a drawing picture from the DrawingPictures collection.
Remove
method in object AnnotatedViews
Removes an annotated view from the AnnotatedViews collection.
Remove
method in object FunctActionsGroup
Removes an action from the actions' group.
Remove
method in object Layout2DViews
Removes a layout2D view from the Layout2DViews collection.
Remove
method in object Clashes
Removes a Clash object from the Clashes collection.
Remove
method in object RenderingShootings
Removes a shooting from the shootings collection.
Remove
method in object AnalysisSets
Removes a set using its index or its name from the set collection.
Remove
method in object Inertias
Removes an Inertia object from the Inertias collection.
Remove
method in object Sections
Removes a Section object from the Sections collection.
Remove
method in object HumanTaskList
Remove
method in object Layout2DSheets
Removes a Layout2Dsheet from the Layout2DSheets collection.
Remove
method in object AnalysisCases
Removes a case using its index or its name from the case collection.
Remove
method in object Distances
Removes a Distance object from the Distances collection.
Remove
method in object DrawingDimensions
Removes a drawing dimension from the DrawingDimensions collection.
Remove
method in object DrawingComponents
Removes a drawing component from the DrawingComponents collection.
Remove
method in object ClashResults
Removes a ClashResult object from the ClashResults collection.
Remove
method in object MechanismCommands
Remove a MechanismCommand from the MechanismCommands collection.
Remove
method in object AssemblyFeatures
Removes an AssemblyFeature object from the AssemblyFeatures collection.
Remove
method in object ABQBoundaryConditions
Removes an Abaqus boundary condition using its index or its name from the collection of boundary conditions.
Remove
method in object AnalysisEntities
Removes a entity using its index or its name from the entity collection.
Remove
method in object RenderingEnvironments
Removes a environment from the environments collection.
Remove
method in object AnalysisMeshParts
Removes a meshpart using its index or its name from the meshpart collection.
Remove
method in object Products
Removes a product from the Products collection.
Remove
method in object ArrangementRuns
Removes the specified ArrangementRun object from the collection.
Remove
method in object ArrangementAreas
Removes the specified ArrangementArea object from the collection.
Remove
method in object Publications
Removes a publication from the product.
Remove
method in object AnalysisLocalEntities
Returns an analysis local entity.
Remove
method in object AnalysisOutputEntities
Removes a entity using its index or its name from the entity collection.
Remove
method in object ArrangementPathways
Removes the specified ArrangementPathway object from the collection.
Remove
method in object ArrangementContours
Removes the specified ArrangementContour object from the collection.
Remove
method in object ArrangementRectangles
Removes the specified ArrangementRectangle object from the collection.
Remove
method in object ArrangementBoundaries
Removes the specified ArrangementBoundary object from the collection.
Remove
method in object DNBAttachmentFactory
Remove an attachment.
Remove
method in object ManufacturingPrecedences
Removes an object from the precedences collection.
Remove
method in object ArrangementItemReservations
Removes the specified ArrangementItemReservation object from the collection.
Remove
method in object AnalysisMeshLocalSpecifications
Removes a local specification using its index or its name from the local specification collection.
Remove
method in object ExpertRuleBaseComponentRuntimes
Removes an Expert component from the Rule Base collection.
Remove2
method in object Selection
Removes the iIndex-th SelectedElement object contained by the current selection.
RemoveAccuracyProfile
method in object RobGenericController
Remove Accuracy profile given name in controller.
RemoveActiveLight
method in object RenderingShooting
Removes a light from the shootings active lights list.
RemoveAffectedComponent
method in object AssemblyFeature
Removes a component from the affected component list.
RemoveAll
method in object HybridShapeSpline
Removes all elements in the list of points.
RemoveAll
method in object RenderingLights
Removes all lights from the collection.
RemoveAll
method in object HybridShapePlaneMean
Removes all elements in the list of points.
RemoveAll
method in object RenderingShootings
Removes all shootings from the collection.
RemoveAll
method in object RenderingEnvironments
Removes all environments.
RemoveAll
method in object ManufacturingPrecedences
Removes all objects from the precedences collection.
RemoveAllAlternateGraphics
method in object SchRouteAlternateGraphic
Removes all alternate graphical primitives.
RemoveAllAlternateGraphicsOfStyle
method in object SchRouteAlternateGraphic
Removes all alternate graphical primitives of the given style.
RemoveAllBound
method in object HybridShapeFill
Removes all boundaries of the hybrid shape fill feature object.
RemoveAllCutPoints
method in object HybridShapeSweep
Removes all cut points.
RemoveAllDraftAngleDefinitionLocations
method in object HybridShapeSweepLine
Removes all geometrical elements and values necessary for draft angle definition.
RemoveAllFacesToKeep
method in object HybridShapeFilletBiTangent
Remove all the faces to keep.
RemoveAllFillPoints
method in object HybridShapeSweep
Removes all fill points.
RemoveAllFrozenCurveSegments
method in object HybridShapeCurveSmooth
Removes all Frozen Curve Segment of the hybrid shape curve smooth object.
RemoveAllFrozenPoints
method in object HybridShapeCurveSmooth
Removes all Frozen Points of the hybrid shape curve smooth object.
RemoveAllGeometry
method in object ManufacturingSurfaceGeomArea
Removes all the geometry linked to a Manufacturing Surface NCGeometry feature.
RemoveAllGeometry
method in object ManufacturingPrismaticMachiningArea
Removes all the geometry of a specified type linked to a Manufacturing Prismatic Machining Area.
RemoveAllGraphicalPrimitives
method in object SchRouteGraphic
Remove all graphical primitives of a route, including alternate graphical primitives.
RemoveAllInternalEdgesElement
method in object HybridShapeExtrapol
Removes all internal elements.
RemoveAllLinks
method in object DrawingViewGenerativeLinks
Removes all links of the drawing view.
RemoveAllPath
method in object TCPTraceManager
Remove all traces from the current resource.
RemoveAllPointsAndParams
method in object HybridShapeIntegratedLaw
Removes all the points and associated parameters.
RemoveAllPosAngle
method in object HybridShapePositionTransfo
Removes all numerical positioning parameters : first axis direction angles.
RemoveAllPosCoord
method in object HybridShapePositionTransfo
Removes all numerical positioning parameters : origin planar coordinates.
RemoveAllPrinterDirectories
method in object PrintersSettingAtt
Remove all the directories including printer files.
RemoveAllPrinterGroups
method in object PrintersSettingAtt
Remove all the groups of printers.
RemoveAlternateGraphic
method in object SchRouteAlternateGraphic
Remove an alternate graphical primitive from a route.
RemoveAnalyses
method in object Sampled
Returns or sets the Sampled object.
RemoveAngle
method in object HybridShapeSweepLine
Removes an angle.
RemoveAngle
method in object HybridShapeSweepCircle
Removes an angle.
RemoveAngle
method in object HybridShapeSweepExplicit
Removes an Angle.
RemoveAssociation
method in object DesignTable
Removes an existing association.
RemoveAttribute
method in object AMPTag
Function to remove an existing attribute on the given AMPTag.
RemoveAuxAttribute
method in object AMPTag
Function to remove an auxilliary attribute of the given AMPTag.
RemoveAxisSystem
method in object ABQSpringConnectionProperty
RemoveBodyToHeal
method in object HybridShapeHealing
Removes the body to be healed from the list at specified position.
RemoveBoundAtPosition
method in object HybridShapeFill
Removes boundary at specified position in hybrid shape fill feature object.
RemoveBoundaryElement
method in object SchGRRZone
Remove a boundary element to the zone.
RemoveByAssignmentType
method in object Items
RemoveByAssignmentType
method in object Resources
RemoveByIndex
method in object PspListOfBSTRs
Remove a character string from the list by specifying its position in the list.
RemoveByIndex
method in object PspListOfLongs
Remove a long integer from the list by specifying its position in the list.
RemoveByIndex
method in object PspListOfObjects
Remove an object from the list by specifying its position in the list.
RemoveByIndex
method in object PspListOfDoubles
Removes a double from the list by specifying its position in the list.
RemoveByIndex
method in object SchListOfBSTRs
Remove a character string from the list by specifying its position in the list.
RemoveByIndex
method in object SchListOfLongs
Remove a long integer from the list by specifying its position in the list.
RemoveByIndex
method in object SchListOfObjects
Remove an object from the list by specifying its position in the list.
RemoveByIndex
method in object SchListOfDoubles
Remove a double from the list by specifying its position in the list.
RemoveColumn
method in object DrawingTable
Removes the indicated column.
RemoveConnector
method in object PspPhsyicalProduct
Removes part connector.
RemoveConnector
method in object SchCompConnector
Remove a connector.
RemoveConstraint
method in object HybridShapeFill
Removes constraint at specified position in hybrid shape fill feature object.
RemoveConstraint
method in object MoveToPostureActivity
RemoveConstraint
method in object OptimizationConstraints
Removes a given optimization constraint using its index or its name from the optimization constraints collection.
RemoveControlPoint
method in object HybridShapeSpline
Removes a point at the given position.
RemoveCurvatureRadiusDirection
method in object HybridShapeSpline
Removes Curvature Radius Direction for the given point of the spline.
RemoveCurvatureRadiusValue
method in object HybridShapeSpline
Removes Curvature Radius Value for the given point of the spline.
RemoveCurves
method in object HybridShapeWrapCurve
Removes a couple of reference curve and target curve from the WrapCurve.
RemoveCuttingElem
method in object HybridShapeSplit
Removes a cutting feature.
RemoveDLName
method in object DLNameSettingAtt
Remove a logical name.
RemoveDof
method in object ABQSpringConnectionProperty
Unsets the stiffness of the spring for given degree of freedom.
RemoveDraftAngleDefinitionLocationPosition
method in object HybridShapeSweepLine
Removes a draft angle location.
RemoveDropOffView
method in object SchDropOffView
Removes a drafting view from the schematics diagram.
RemoveERAssignment
method in object EKPServices
Removes the ER assignment for the passed Geometric Feature.
RemoveERWithFTA
method in object EKPServices
Removes the ER assignment for the passed FTA.
RemoveEdgeToKeepSharp
method in object HybridShapeHealing
Removes the edge from the list of edges to be kept sharp at specified position.
RemoveEdgeToTear
method in object HybridShapeUnfold
Removes an element used by the hybrid shape unfold feature object.
RemoveElectronicBehaviour
method in object PCBObject
RemoveElem
property in object HybridShapeFilletTriTangent
Returns or sets the support surface to remove feature.
RemoveElement
method in object HybridShapeAssemble
Removes an element used by the hybrid shape assemble feature object.
RemoveElement
method in object HybridShapePolyline
Removes the element at a specified position in the polyline.
RemoveElement
method in object HybridShapePlaneMean
Removes a point in the list.
RemoveElement
method in object HybridShapeExtractMulti
Removes the body to be extracted from the list of constraints at specified position.
RemoveElementToFreeze
method in object HybridShapeHealing
Removes the element from the list of elements to be freezed at specified position.
RemoveElementToKeep
method in object HybridShapeTrim
Removes an element from specifications.
RemoveElementToKeep
method in object HybridShapeSplit
Removes an element from specifications.
RemoveElementToRemove
method in object HybridShapeTrim
Removes an element from specifications.
RemoveElementToRemove
method in object HybridShapeSplit
Removes an element from specifications.
RemoveExplicit
method in object Group
Removes a product from the group using its index.
RemoveExtension
method in object SchematicExtension
Removes a Schematic extension to an application object.
RemoveFace
object
Represents the Remove Face operation.
RemoveFace
property in object RemoveFace
Adds a new face to be removed.
RemoveFace
property in object ReplaceFace
Returns the face to be removed.
RemoveFaceForClosing
method in object HybridShapeLoft
Removes face used to close the lofted surface.
RemoveFaceToDraft
method in object DraftDomain
Removes a face from those to be drafted.
RemoveFaceToKeep
method in object HybridShapeFilletBiTangent
Remove a face to keep.
RemoveFaceWithDifferentThickness
method in object Shell
Removes an existing face from those to be thicken with different offset values by the shell process.
RemoveFaceWithDifferentThickness
method in object Thickness
Removes an existing thickened face.
RemoveFaces
property in object RemoveFace
Get the specified faces to be removed.
RemoveFastenerFromProcess
method in object DNBFastenerItemServices
Unassigns a specified DELMIAFastener from a specified Activity.
RemoveFastenerFromResource
method in object DNBFastenerItemServices
Unassigns a specified DELMIAFastener from a specified Resource.
RemoveFederatedElement
method in object HybridShapeAssemble
Removes an element to the list of elements to federate.
RemoveFile
method in object SendToService
Removes a file from the list of the files that will be copied.
RemoveFilter
method in object Document
Removes an existing visualization filter.
RemoveFittingPoints
method in object HybridShapeSweepExplicit
Removes the fitting points.
RemoveFixTogether
method in object FixTogether
Removes a FixTogether from the FixTogether.
RemoveFormalParameter
method in object Law
Removes a formal parameter of the law.
RemoveFreeParameter
method in object FreeParameters
Removes a free parameter.
RemoveFrom
method in object AMPPath
Function to remove an AMPTag at a given index of the AMPPath.
RemoveFrozenCurveSegment
method in object HybridShapeCurveSmooth
Removes Frozen Curve Segment from the list of Forzen curves in hybrid shape curve smooth object.
RemoveFrozenPoint
method in object HybridShapeCurveSmooth
Removes Frozen Point from the list of frozen points in hybrid shape curve smooth object.
RemoveGraphicalPrimitive
method in object SchCntrGraphic
Remove a graphical primitive from a connector.
RemoveGraphicalPrimitive
method in object SchRouteGraphic
Remove a graphical primitive from a route.
RemoveGraphicalRepresentation
method in object SchCompGraphic
Remove a graphical representation from a component.
RemoveGraphicalRepresentation
method in object SchZoneGraphic
Remove a graphical representation from a zone.
RemoveGuide
method in object HybridShapeLoft
Removes a guide curve from the lofted surface.
RemoveGuide
method in object HybridShapeSweepConic
Removes a guide curve given its index.
RemoveGuide
method in object HybridShapeSweepCircle
Removes a guide curve.
RemoveGuide
method in object HybridShapeSweepExplicit
Removes a guide curve.
RemoveGuideCrv
method in object HybridShapeSweepLine
Removes a guide curve.
RemoveGuideSur
method in object HybridShapeSweepLine
Removes a guide surface.
RemoveGuideTangent
method in object HybridShapeLoft
Removes a tangent surface of a guide from the lofted surface.
RemoveInterferenceFit
method in object ABQSurfaceToSurfaceContact
Removes interference fit from a contact pair feature.
RemoveInternalFlow
method in object SchCompFlow
Remove an internal flow from a component.
RemoveInterrupt
method in object DrawingDimExtLine
Remove interruption on extension lines.
RemoveInterruption
method in object DrawingArrow
Remove an interruption to an arrow.
RemoveInterruption
method in object DrawingLeader
Remove an interruption to an leader.
RemoveLength
method in object HybridShapeSweepLine
Removes a length.
RemoveLink
method in object Activity
This method removes a link existing on the current activity.
RemoveMachinableGeometry
method in object ManufacturingMachinableArea
Removes a machinable geometry from the list.
RemoveMasterShapeRepresentation
method in object Product
Removes the master shape representation from the product.
RemoveMember
method in object PspGroup
Removes a member from the group.
RemoveMember
method in object SchComponentGroup
Remove a member to the component group.
RemoveMfgAssembly
method in object MfgAssemblyFactory
Remove a given Manufacturing Assembly from the MA Applicative Container.
RemoveMotionProfile
method in object RobGenericController
Remove Motion profile given name in controller.
RemoveNCGeometry
method in object ManufacturingSurfaceMachiningArea
Removes all the NCGeometry of a specified type linked to a Manufacturing Surface Machining Area.
RemoveObjFrameProfile
method in object RobGenericController
Remove ObjFrame profile given name in controller.
RemoveObject
method in object Marker3D
Removes an object which is linked to the marker 3D using its index.
RemoveObject
method in object Hyperlink
Removes an Url which is linked to the Hyperlink using its index.
RemoveOrientation
property in object HybridShapeFilletTriTangent
Returns or sets the third orientation used to specify fillet center position.
RemoveParameter
method in object HybridShapeSweepConic
Removes conical sweep parameter, whether it is a single value or a law.
RemovePart
method in object MfgAssembly
Removes a part (Product, Resource or other MA/MK) from the Manufacturing Assembly.
RemovePartSurfaces
method in object ManufacturingPattern
Remove the Part Surfaces of the Manufacturing Pattern.
RemovePathByIndex
method in object TCPTraceManager
Remove a specific path based on its position in the list.
RemovePathByObject
method in object TCPTraceManager
Remove a specific trace based on the object.
RemovePickedMfgAssembly
method in object PickActivity
RemovePickedProduct
method in object PickActivity
RemovePlacedMfgAssembly
method in object PlaceActivity
RemovePlacedProduct
method in object PlaceActivity
RemovePoint
method in object DrawingArrow
Remove a point from an arrow.
RemovePoint
method in object DrawingLeader
Remove a point from an leader.
RemovePointAndParam
method in object HybridShapeIntegratedLaw
Removes a point and its parameter.
RemovePointedGeometry
method in object ManufacturingMachinableGeometry
Removes a geometry from the pointed geometry list.
RemovePoints
method in object SchRoute
Remove points from route.
RemovePoints
method in object SchGRRRoute
Remove points from route graphic.
RemovePosition
method in object Plane
Removes reference position of a plane.
RemovePosition
method in object FunctActionsGroup
Removes an action from the actions' group.
RemovePrinterDirectory
method in object PrintersSettingAtt
Remove a directory of printer files from the directories list.
RemovePrinterGroup
method in object PrintersSettingAtt
Remove a group of printers.
RemoveProduct
method in object FixTogether
Removes a Product from the FixTogether.
RemoveRadius
method in object HybridShapeSweepCircle
Removes a radius.
RemoveRelimitingGeometry
method in object ManufacturingOperation
Removes the geometry on relimiting element PROFILE CONTOURING operation ONLY.
RemoveRootOfFacts
method in object ExpertRuleBaseRuntime
Removes a root of facts from the rule base.
RemoveRow
method in object DrawingTable
Removes the indicated row.
RemoveSample
method in object Replay
Remove a specific sample.
RemoveSection
method in object HybridShapeLoft
Removes a loft section from the lofted surface.
RemoveSection
method in object HybridShapeSpine
Removes a section or a plane from the spine curve.
RemoveSectionPoint
method in object HybridShapeLoft
Removes a closing point of a section from the lofted surface.
RemoveSectionTangent
method in object HybridShapeLoft
Removes the tangent surface of a section from the lofted surface.
RemoveShapeRepresentation
method in object Product
Removes a specific representation from the product.
RemoveStartPointGeometry
method in object ManufacturingOperation
Removes the start point element on POCKETING operation ONLY.
RemoveSubElement
method in object HybridShapeAssemble
Removes a sub element used by the hybrid shape assemble feature object.
RemoveSupport
method in object HybridShapeSpline
Removes the support surface.
RemoveSupport
method in object HybridShapeLinePtPt
Removes the support surface.
RemoveSupport
method in object HybridShapeLinePtDir
Removes the support surface.
RemoveSupport
method in object HybridShapeLineTangency
Removes the support surface.
RemoveSupport
method in object HybridShapeCircle3Points
Removes the support surface.
RemoveSupportAtPosition
method in object HybridShapeFill
Removes support at specified position in hybrid shape fill feature object.
RemoveSymbol
method in object SchGRRCntr
Remove the graphical primitive used as the connector's symbol.
RemoveTangency
method in object HybridShapeSweepConic
removes tangency surface or curve and its angle given the guide curve index.
RemoveTangentDirection
method in object HybridShapeSpline
Removes tangent Direction for the given point of the spline.
RemoveTension
method in object HybridShapeSpline
Removes the Tension for the given point of the spline.
RemoveToolProfile
method in object RobGenericController
Remove tool profile given name in controller.
RemoveTrickyFace
method in object HybridShapeOffset
Remove the tricky face object on the object.
RemoveURL
method in object Noa
Removes an URL.
RemoveURL
method in object FlagNote
Remove an URL.
RemovedMaterialPercentage
property in object PartComps
Returns the removed material percentage.
RemovedMaterialVolume
property in object PartComps
Returns the removed material volume.
RemovefromLogicalDataAttrList
method in object PlugMapViewSettingAtt
Method to Remove a parameter fron the LogicalDataAttrList.
RemovefromTerminationAttrList
method in object PlugMapViewSettingAtt
Method to Remove a parameter fron the TerminationAttrList.
Rename
method in object Relation
Renames the relation.
Rename
method in object Parameter
Renames the parameter.
RenameDLName
method in object DLNameSettingAtt
Rename an existing DLName.
RenameSelectionSet
method in object SelectionSets
Renames a Selection Set.
Renamed
property in object Parameter
Returns a boolean saying if the parameter is a renamed parameter or not.
Render
method in object RenderingShooting
Render the shooting Caution: Product involved in rendering calculation should not be closed before the end of computation.
RenderStyle
property in object TreeTabSettingAtt
RenderingEnvironment
object
Represents a Environment object.
RenderingEnvironmentWall
object
Represents a Environment object.
RenderingEnvironments
object
A collection of all the Rendering Environments objects.
RenderingLight
object
Represents a Rendering Light object.
RenderingLights
object
A collection of all the Rendering Lights objects.
RenderingMaterial
object
Represents an RenderingMaterial object.
RenderingMaterial
property in object Material
Returns the rendering material object from the current material.
RenderingMode
property in object Viewer3D
Returns or sets the rendering mode.
RenderingMode
property in object Layout2DRoot
Set/Get the rendering mode of Layout2D.
RenderingSettingAtt
object
The interface to access a CATIARenderingSettingAtt.
RenderingShooting
object
Represents a Material object.
RenderingShootings
object
A collection of all the Rendering Shootings objects.
Reorder
method in object List
Reorders an element by moving it from the current position to the target position.
RepMod
property in object IgesSettingAtt
Returns or sets the Export representation mode setting parameter value.
ReparentTagGroup
method in object TagGroupFactory
Repartition
object
Represents the repartition.
RepeatU
property in object RenderingMaterial
Returns or sets the texture repeat status along U axis.
RepeatV
property in object RenderingMaterial
Returns or sets the texture repeat status along V axis.
Replace
method in object List
Sets an item in the list at a position.
Replace
method in object SchReplace
Replace an existing component with this component.
ReplaceBoundAtPosition
method in object HybridShapeFill
Replaces the boundary at specified position in the Fill.
ReplaceByCGR
method in object DMUDataFlow
Replaces all components of the product by the corresponding CGR located in a directory.
ReplaceComponent
method in object Products
Creates a component which replace the given one.
ReplaceConstraint
method in object HybridShapeFill
Replaces the constraint at specified position in the Fill.
ReplaceElement
method in object HybridShapeAssemble
Replaces the element at specified position in the hybrid shape assemble feature object.
ReplaceElement
method in object HybridShapePolyline
Replaces the element at a specified position in the polyline.
ReplaceElement
method in object HybridShapeExtractMulti
Replaces an element to extract in the list of constraints at specified position.
ReplaceFace
object
Represents the Replace Face operation.
ReplaceMaterialLinks
method in object MaterialManager
In current session, replace all links towards a material 1 with a link towards an other material 2.
ReplaceOnlyAfterCurrent
property in object PartInfrastructureSettingAtt
Returns or sets the "ReplaceOnlyAfterCurrent" parameter.
ReplacePointAtPosition
method in object HybridShapeSpline
Replaces a point in the list at the given position.
ReplacePointAtPosition
method in object HybridShapePlaneMean
Replaces a point in the list at the given position.
ReplaceProduct
method in object Products
Creates a component which replace the given one.
ReplaceSupportAtPosition
method in object HybridShapeFill
Replaces the support at specified position in the Fill.
ReplaceToHealElement
method in object HybridShapeHealing
Replaces an element to heal.
Replay
object
Report
method in object ExpertRuleBaseRuntime
Launch a Report.
ReportCheckAdvisor
property in object ReportGenerationSheetSettingAtt
Returns or sets the ReportCheckAdvisor parameter.
ReportCheckExpert
property in object ReportGenerationSheetSettingAtt
Returns or sets the ReportCheckExpert parameter.
ReportDescriptionLength
property in object ExpertRuleBaseRuntime
Returns or sets the Report Description Length (For Text option only).
ReportGenerationSheetSettingAtt
object
The interface to access a CATIAReportGenerationSheetSettingAtt.
ReportHtmlInCatiaSession
property in object ReportGenerationSheetSettingAtt
Returns or sets the ReportHtmlInCatiaSession parameter.
ReportName
property in object Geometry2D
ReportObjectsInformation
property in object ReportGenerationSheetSettingAtt
Returns or sets the ReportObjectsInformation parameter.
ReportOutPutFormat
property in object ExpertRuleBaseRuntime
Returns or sets the Report OutPut Format.
ReportOutputDirectory
property in object ReportGenerationSheetSettingAtt
Returns or sets the ReportOutputDirectory parameter.
ReportParametersInformation
property in object ReportGenerationSheetSettingAtt
Returns or sets the ReportParametersInformation parameter.
ReportPassedObjects
property in object ReportGenerationSheetSettingAtt
Returns or sets the ReportPassedObjects parameter.
ReportPath
property in object ExpertRuleBaseRuntime
Returns or sets the Report output path.
ReportShowResult
property in object ExpertRuleBaseRuntime
Returns or sets the option for sorting the report.
Representation
property in object ManufacturingActivity
This property returns the path of the representation file for a manufacturing Activity.
RepresentationMode
property in object DrawingViewGenerativeBehavior
Returns or sets generated geometry representation mode.
ResetAllModalValues
method in object ManufacturingGeneratorData
Resets all modal values.
ResetAttachedOwner
method in object TCPTrace
Resets the attached owner of the trace to the world.
ResetAttachedOwner
method in object TCPTraceManager
Resets the attached owner of the trace to the world.
ResetCmdValueToZero
method in object Mechanism
Sets the command value to zero for the given command without disturbing part positions.
ResetCutback
method in object StrMemberExtremity
Resets the defined cutback object.
ResetDerivedAttr
method in object PspAttribute
Reset derived status of the attribute to not-derived.
ResetGraphics
method in object TCPTrace
Reset the current appearance regarding the current general settings (not the one applied on the current object).
ResetPosition
method in object PointFastener
ResetSelection
method in object AnalysisImage
Resets all selections in an image.
ResetTarget
method in object SWKIKConstraint
Reset the offset of the target object (i.
ResetToAdminValues
method in object SettingController
Restores the administrated values of the all attributes.
ResetToAdminValuesByName
method in object SettingController
Restores the administrated values of a subset of the attributes.
ResetToAdminValuesForUnits
method in object UnitsSheetSettingAtt
Implements a function from an interface.
ReshapeExtremity
method in object SchRoute
Change the position of the extremity of the route.
ReshapeExtremity2
method in object SchRoute
Change the position of the extremity of the route.
ResolvedSectionsPath
property in object PathESSRessourcesSettingAtt
Returns or sets the ResolvedSectionsPath parameter.
ResolvedText
property in object WIText
Resource
object
The object that represents a resource.
ResourceCollection
object
Interface representing collection of Resources.
ResourceFilter
property in object TreeTabSettingAtt
ResourceProgramManager
object
Represents the Resource Program manager of a resource.
Resources
object
The collection of resources related to the current activity.
Resources
property in object Activity
This property returns the interface which manages the resources hierarchy on the activity.
Resources
property in object PPRDocument
Retrieves the list of Resources contained in the current document.
Response
property in object ABQHeatTransferStep
Sets or returns the response type.
Response_Type
enum
Thermal response types.
RestartReadInterval
property in object ABQJob
Sets or returns the interval of restart read requests.
RestartReadJob
property in object ABQJob
Sets or returns or the path to the original job (*.
RestartReadOption
property in object ABQJob
Sets or returns the restart read option.
RestartReadStep
property in object ABQJob
Sets or returns the Step.
RestartReadStepNumber
property in object ABQJob
Sets or returns the step number of restart read requests.
RestartReadStepSelectionOption
property in object ABQJob
Sets or returns the step selection option for restart read.
RestartRequestFrequency
property in object ABQJob
DEPRECATED - please use RestartRequestOption instead.
RestartRequestFrequencyValue
property in object ABQJob
Sets or returns the frequencey value of restart requests.
RestartRequestIntervalValue
property in object ABQJob
Sets or returns the interval of restart requests.
RestartRequestOption
property in object ABQJob
Sets or returns the restart request option.
RestartRequestOverlay
property in object ABQJob
Sets or returns the overlay option for the restart request.
RestartRequestTimeMarks
property in object ABQJob
Sets or returns the time marks flag for restart requests.
RestoreInitialState
method in object SimulationInitState
Restores initial state attributes for all objects in the current document that have a saved initial state.
RestoreInitialStateList
method in object SimulationInitState
Restores initial state attributes for the objects in the given list.
RestoreValuePosition
method in object DrawingDimension
Restore dimension value position.
ResultOutputDir
property in object FASReportingSettingAtt
Gets value of "OLP Robot Program Directory" parameter.
Retrieve
method in object FunctActionsGroup
Returns an action using its index or its name from the actions group.
RetrieveKindOfLinked
method in object FunctAssociation
Retrieve the kind of linked object.
RetrieveLinked
method in object FunctAssociation
Retrieve a linked object.
RetrieveMfgAssembly
method in object MfgAssemblyFactory
Retrieve all the Manufacturing Assemblies of a given name.
RetrieveMfgAssemblyAtIndex
method in object MfgAssemblyFactory
Retrieve a Manufacturing Assembly at the given index from the MA Applicative Container.
Reverse
method in object Hole
Reverses the hole direction .
Reverse
method in object ManufacturingPattern
Reverses the numbering of a Manufacturing Pattern.
ReverseDepth
method in object Stiffener
Reverses the stiffener direction.
ReverseDirection
method in object Thread
Swap the direction of the thread or the tap.
ReverseDirection
method in object StrPlate
Reverses the material orientation of the plate.
ReverseInnerSide
method in object Prism
Reverses the prism inner side when the profile is open.
ReverseInnerSide
method in object AssemblyPocket
Reverses the pocket inner side when the profile is open.
ReverseThickness
method in object Stiffener
Reverses the stiffener thickness direction.
ReverseTime
method in object Sampled
Returns or sets the Sampled object.
Revision
property in object Product
Returns or sets the product's revision number.
RevolAxis
property in object HybridShapePlaneAngle
Returns or sets the rotation axis.
RevoluteAxis
property in object Revolution
Returns or sets the rotation axis for Revol.
Revolution
object
Represents the revolution-based shapes.
Rib
object
Represents the rib shape.
RibbonRelimitationMode
property in object HybridShapeFilletBiTangent
Returns or Sets fillet ribbon relimitation mode (or fillet extremities mode).
RibbonRelimitationMode
property in object HybridShapeFilletTriTangent
Returns or sets fillet ribbon relimitation mode (or fillet extremities mode).
RightMargin
property in object PageSetup
Returns or sets the right margin.
RmvNotAssgnPrdResOnSync
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the RmvNotAssgnPrdResOnSync parameter.
RobAnalysisHeartBeatUsageSettingAtt
object
Interface to handle the parameter used to set as an option, to either enable or disable robot heart beat rate while motion planning, in the Infrastructure-DELMIA Infrastructure-Robot Analysis Tools Options Tab page.
RobAnalysisSettingAtt
object
Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Robot Analysis Tools Options Tab page.
RobControllerFactory
object
Interface to manipulate Robot Controller.
RobGenericController
object
RobotMotion
object
Represents a Robot Motion.
RobotProgramDir
property in object IgpOlpSettingAtt
Returns or sets value of OLP Directory parameter.
RobotTask
object
Represents the Robot Task.
RobotTaskFactory
object
Represents the Task Creation Factory for Robots.
Rollback
method in object SettingController
Restores the last memory copy of the setting attribute values.
RollbackForUnits
method in object UnitsSheetSettingAtt
Implements a function from an interface.
RootDLNameCreationRight
property in object DLNameSettingAtt
Returns or set the right to create new Root DLNames.
RootParameterSet
property in object Parameters
Returns the root parameter set of a document.
RootType
property in object ElecSchematicObject
Returns the Electrical Schematic Object's Root Type (Equipment, Signal, Bundle, Wire).
RotAccelColor
property in object RobAnalysisSettingAtt
Returns or sets the RotAccelColor parameter.
RotAccelLimit
property in object RobAnalysisSettingAtt
Returns or sets the RotAccelLimit parameter.
RotSpeedColor
property in object RobAnalysisSettingAtt
Returns or sets the RotSpeedColor parameter.
RotSpeedLimit
property in object RobAnalysisSettingAtt
Returns or sets the RotSpeedLimit parameter.
RotaryAxis
property in object ManufacturingMachine
Give the MfgRotaryAxis linked to a Manufacturing Machine.
Rotate
object
Represents the shape rotate feature object.
Rotate
method in object Viewer3D
Applies a rotation.
Rotate
method in object StrMember
Rotates the section on its support object.
Rotate
method in object DrawingTable
Rotates the table relatively to its original position.
Rotate
method in object SchMovable
Rotate a schematic object with an angle in radian.
RotateAtPoint
method in object SchMovable2
Rotate a schematic object with an angle in radian at a point.
Rotation
property in object PageSetup
Returns or sets the rotation of the document or the image to print.
Rotation
property in object RenderingEnvironmentWall
Returns or sets the texture rotation angle (in degrees).
RotationAngle
property in object Pattern
Returns the pattern global rotation angle.
RotationOffsetAngle
property in object SWKIKConstraint
Returns or sets the rotation offset angle for the 3D plane constraint.
RotationOrientation
property in object CircPattern
Returns or sets whether the shapes are copied clockwise on the crowns with respect to the rotation axis direction.
RotationSnapAngle
property in object FTASettingAtt
Returns or sets the Rotation Snap Angle parameter.
RotationSnapAuto
property in object FTASettingAtt
Returns or sets the Rotation Snap Auto parameter.
RotationSphereMode
property in object VisualizationSettingAtt
Returns the RotationSphereMode parameter.
RotationType
property in object HybridShapeRotate
Returns or sets the type of the rotation definition.
Roughness
object
Interface to manage Roughness TPS.
Roughness
method in object Annotation
Get the annotation on the Roughness interface.
RoundRadius
property in object AutoFillet
Returns the Round radius.
RoundRadiusActivation
property in object AutoFillet
Returns the AutoFillet RoundRadiusActivation flag (for AutoFillet only).
RouteStringPartInSpace
method in object PspPlacePart
Routes a string part.
RpmReport
object
Rule
object
Represents the program relation.
RuleBaseEdition
property in object ExpertRuleBaseRuntime
Returns the editable object corresponding to this rulebase.
RuleEdition
property in object ExpertRuleRuntime
Returns the editable object corresponding to this rule.
RuleSet
property in object ExpertRuleBaseRuntime
Returns the Set linked to the RuleBase.
RuleSetEdition
property in object ExpertRuleSetRuntime
Returns the editable object corresponding to this ruleset.
RuledDevelopableSurface
property in object HybridShapeBlend
Returns or sets the ruled developable surface mode.
Run
method in object SendToService
Executes the copy action, according to previously set files and options.
Run
method in object Optimization
Runs the optimization as it is defined.
Run
method in object AnalysisAdaptivityManager
Run the adaptivity process.
RunAnnotBehavior
property in object SimulationSettingAtt
Returns or sets the RunAnnotBehavior setting attribute value.
RunAnnotation
property in object SimulationSettingAtt
Returns or sets the RunAnnotation setting attribute value.
RunEndCondition
property in object SimulationSettingAtt
Returns or sets the RunEndCondition setting attribute value.
RunFileGenerator
method in object ManufacturingOutputGenerator
Runs the Output Generator on the datas used for generation.
RunHlnkBehavior
property in object SimulationSettingAtt
Returns or sets the RunHlnkBehavior setting attribute value.
RunHyperlink
property in object SimulationSettingAtt
Returns or sets the RunHyperlink setting attribute value.
RunPause
property in object SimulationSettingAtt
Returns or sets the RunPause setting attribute value.
RunStateMgt
property in object SimulationSettingAtt
Returns or sets the RunStateMgt setting attribute value.
RunStepSize
property in object SimulationSettingAtt
Returns or sets the RunStepSize setting attribute value.
RunTextBehavior
property in object SimulationSettingAtt
Returns or sets the RunTextBehavior setting attribute value.
RunTextMsg
property in object SimulationSettingAtt
Returns or sets the RunTextMsg setting attribute value.
RunTransition
method in object AnalysisModel
Apply a transition to the analysis model.
RunViewpoint
property in object SimulationSettingAtt
Returns or sets the RunViewpoint setting attribute value.
RunVisBehavior
property in object SimulationSettingAtt
Returns or sets the RunVisBehavior setting attribute value.
ratioLock
property in object DrawingPicture
Returns or sets the ratioLock of the drawing picture.
remove_KeepFace
method in object RemoveFace
Removes a face to be Kept.
remove_RemoveFace
method in object RemoveFace
Removes a face to be removed.
reorder_Sheets
method in object DrawingRoot
Changes the positions of the sheets in this drawing according to the given ordered list.
reorder_Sheets
method in object Layout2DRoot
Changes the positions of the sheets in this drawing according to the given ordered list.
reorder_Views
method in object DrawingSheet
Changes the positions of the views in this sheet according to the given ordered list.
reorder_Views
method in object Layout2DSheet
Changes the positions of the views in this sheet according to the given ordered list.
SHMStdProfPath
property in object CatalogSHMObjectSettingAtt
Returns or sets the SHMStdProfPath setting parameter value.
SHMViewFDBeadBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDBeadBTLFeat setting parameter value.
SHMViewFDCircStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDCircStampBTLFeat setting parameter value.
SHMViewFDCurveStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDCurveStampBTLFeat setting parameter value.
SHMViewFDFlgCutBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDFlgCutBTLFeat setting parameter value.
SHMViewFDFlgCutIML
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDFlgCutIML setting parameter value.
SHMViewFDFlgCutOML
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDFlgCutOML setting parameter value.
SHMViewFDFlgHoleBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDFlgHoleBTLFeat setting parameter value.
SHMViewFDFlgHoleIML
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDFlgHoleIML setting parameter value.
SHMViewFDFlgHoleOML
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDFlgHoleOML setting parameter value.
SHMViewFDOtherStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDOtherStampBTLFeat setting parameter value.
SHMViewFDStiffStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDStiffStampBTLFeat setting parameter value.
SHMViewFDSurfFlgBTLFeatBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfFlgBTLFeatBF setting parameter value.
SHMViewFDSurfFlgBTLFeatHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfFlgBTLFeatHF setting parameter value.
SHMViewFDSurfFlgBTLSuppBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfFlgBTLSuppBF setting parameter value.
SHMViewFDSurfFlgBTLSuppHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfFlgBTLSuppHF setting parameter value.
SHMViewFDSurfFlgIMLBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfFlgIMLBF setting parameter value.
SHMViewFDSurfFlgIMLHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfFlgIMLHF setting parameter value.
SHMViewFDSurfFlgOMLBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfFlgOMLBF setting parameter value.
SHMViewFDSurfFlgOMLHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfFlgOMLHF setting parameter value.
SHMViewFDSurfStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDSurfStampBTLFeat setting parameter value.
SHMViewFDUserStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFDUserStampBTLFeat setting parameter value.
SHMViewFPBeadBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPBeadBTLFeat setting parameter value.
SHMViewFPCircStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPCircStampBTLFeat setting parameter value.
SHMViewFPCurveStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPCurveStampBTLFeat setting parameter value.
SHMViewFPFlgCutBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPFlgCutBTLFeat setting parameter value.
SHMViewFPFlgCutIML
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPFlgCutIML setting parameter value.
SHMViewFPFlgCutOML
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPFlgCutOML setting parameter value.
SHMViewFPFlgHoleBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPFlgHoleBTLFeat setting parameter value.
SHMViewFPFlgHoleIML
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPFlgHoleIML setting parameter value.
SHMViewFPFlgHoleOML
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPFlgHoleOML setting parameter value.
SHMViewFPOtherStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPOtherStampBTLFeat setting parameter value.
SHMViewFPStiffStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPStiffStampBTLFeat setting parameter value.
SHMViewFPSurfFlgBTLFeatBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgBTLFeatBF setting parameter value.
SHMViewFPSurfFlgBTLFeatHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgBTLFeatHF setting parameter value.
SHMViewFPSurfFlgBTLSuppBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgBTLSuppBF setting parameter value.
SHMViewFPSurfFlgBTLSuppHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgBTLSuppHF setting parameter value.
SHMViewFPSurfFlgCLBBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgCLBBF setting parameter value.
SHMViewFPSurfFlgCLBHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgCLBHF setting parameter value.
SHMViewFPSurfFlgIMLBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgIMLBF setting parameter value.
SHMViewFPSurfFlgIMLHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgIMLHF setting parameter value.
SHMViewFPSurfFlgOML2BF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgOML2BF setting parameter value.
SHMViewFPSurfFlgOML2HF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgOML2HF setting parameter value.
SHMViewFPSurfFlgOMLBF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgOMLBF setting parameter value.
SHMViewFPSurfFlgOMLHF
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfFlgOMLHF setting parameter value.
SHMViewFPSurfStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPSurfStampBTLFeat setting parameter value.
SHMViewFPUserStampBTLFeat
property in object ViewCharacteristicCurvesSettingAtt
Returns or sets SHMViewFPUserStampBTLFeat setting parameter value.
SPAWorkbench
object
The object to manage all Space Analysis objects.
SVGViewer
property in object FASReportingSettingAtt
Gets value of "OLP Robot Program Directory" parameter.
SWKIKConstraint
object
This interface manages the constraint of the manikin.
SWKManikin
object
This interface groups the methods directly related to the definition of a manikin.
SWKManikinPart
object
This interface represents any part of the manikin that is persistent.
SameDisplay
property in object UnitsSheetSettingAtt
Returns or sets the SameDisplay parameter.
Sampled
object
The interface to access a CATIASampled based object.
Sampleds
object
The collection of all the Sampled objects currently contained in the current document.
SampledsNode
object
The interface to access a CATIASampledsNode.
Satisfaction
property in object OptimizationConstraint
Returns the constraint satisfaction.
Save
method in object Document
Saves the document.
Save
method in object StiEngine
Saves the CATIAStiDBItem in SmarTeam .
SaveAs
method in object Document
Saves the document with another name.
SaveAsFrozen
method in object DMUDataFlow
Saves all documents related to the product in a directory.
SaveAsNewTemplateDirectory
property in object AnalysisPostProSettingAtt
Returns or sets the SaveAsNewTemplateDirectory parameter.
SaveAutoIncrement
property in object RenderingSettingAtt
Returns or sets the SaveAutoIncrement parameter.
SaveCGR
property in object DMUTolSettingAtt
Returns or sets the Save in CGR setting parameter value.
SaveControlFlowInPROMode
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the SaveControlFlowInPROMode attribute.
SaveCoorsysInCgr
property in object MultiCADSettingAtt
SaveEdition
method in object DrawingView
Saves the Sketch Edition.
SaveEdition
method in object Layout2DView
Saves the Sketch Edition.
SaveInCGR
property in object FTAInfraSettingAtt
Returns or sets the Save In CGR setting parameter value.
SaveInitialState
method in object SimulationInitState
Saves initial state attributes for all objects in the current document.
SaveInitialStateList
method in object SimulationInitState
Saves initial state attributes for the objects in the given list.
SavePPRNoDetailing
property in object MfgHubSettingAtt
Returns (or sets, if not initialized) the SavePPRNoDetailing parameter.
SaveRelationToUnExposedPart
property in object MfgHubSettingAtt
Returns (or sets, if not initialized) the SaveRelationToUnExposedPart parameter.
SaveRepository
method in object SettingController
Makes a persistent copy of the setting attribute values on file.
SaveRepositoryForUnits
method in object UnitsSheetSettingAtt
Implements a function from an interface.
SaveShowEffctvtPanel
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the SaveShowEffctvtPanel parameter.
SaveToPPRHub
method in object MHISaveAccess
SaveV5CalcTime
property in object MfgHubSettingAtt
Returns (or sets, if not initialized) the SaveV5CalcTime parameter.
Saved
property in object Document
Returns whether the document has been modified, and thus needs to be saved.
Scale
property in object DrawingView
Returns or sets the scale of the drawing view.
Scale
property in object DrawingSheet
Returns or sets the scale of the drawing sheet.
Scale
method in object SchMovable
Scale a schematic object with a scale factor.
Scale
method in object SchRouteSymbol
Scale the symbol.
Scale
method in object SchAnnotationBreak
Scale the symbol.
Scale2
property in object DrawingView
Returns or sets the scale of the drawing view (Workaround for VBA keyword).
Scale2
property in object DrawingSheet
Returns or sets the scale of the drawing sheet (Workaround for VBA keyword).
Scale2
property in object DrawingComponent
Returns or sets the scale of the drawing component instance (Workaround for VBA keyword).
ScaleFactor
property in object ABQMassScaling
Sets or returns the scale factor.
ScaleFactorOn
property in object ABQMassScaling
Sets or returns whether the scale factor is active.
ScaleSelectedObjects
method in object SchMovable
Scale a list of schematic objects with a scale factor.
ScaleU
property in object RenderingMaterial
Returns or sets the texture scale along U axis.
ScaleU
property in object RenderingEnvironmentWall
Returns or sets the texture scale along the U axis.
ScaleV
property in object RenderingMaterial
Returns or sets the texture scale along V axis.
ScaleV
property in object RenderingEnvironmentWall
Returns or sets the texture scale along the V axis.
Scaling
object
Represents the scaling shape.
Scaling
property in object Sampled
Returns or sets the Sampled object.
Scaling
property in object HybridShapeLawDistProj
Returns or sets the scaling ratio of the law.
Scaling1To1
property in object PageSetup
Returns or sets whether the document or the image should be printed with a zoom factor equals to 1 and the image to print lower left corner on the paper lower corner.
Scaling2
object
Represents the Scaling2 feature object.
ScalingReference
property in object Scaling
Returns or sets the scaling reference element.
Scene
object
Represent the scene.
SceneProductData
object
The interface to access a CATIASceneProduct Using this prefered syntax will enable mkdoc to document your class.
SceneWorkbench
object
Represent the access point to scenes management.
Scenes
object
A collection of scenes contained in a given ProductDocument.
SchAnnotationBreak
object
Manage an annotation break operations.
SchApp2DZoneFrom3DZone
object
Manage a 2D zone that is dropped off from 3D counterpart.
SchAppClass
object
Manage the class hierarchy of an application model.
SchAppCntrColor
object
Manage graphical representation of schematic connector.
SchAppCntrData
object
Manage a schematic connector data.
SchAppCntrDocLink
object
Manage a schematic connector.
SchAppCntrFlow
object
Manage the technical attributes of a schematic connector.
SchAppCntrName
object
Manage a schematic connector.
SchAppCntrShow
object
Manage graphical representation of schematic connector.
SchAppCompatible
object
Provide application rules of how to connect objects.
SchAppComponent
object
Represents an application component object.
SchAppConnectable
object
Represents an application object that can be connected to others.
SchAppConnection
object
Manage a schematic connection.
SchAppConnector
object
Manage a schematic connector.
SchAppDeleteCheck
object
Manage the deletion of a schematic object.
SchAppDeleteCheck2
object
Manage the deletion of a schematic object.
SchAppEnvironment
object
Manage the application environment in a schematic session.
SchAppGapPriority
object
Manage the graphical representation of a route.
SchAppGroup
object
Manage application group.
SchAppModelInit
object
Manage the initialization of application model.
SchAppMultiImage
object
Interface to manage the image object in the Multi-Image-Object concept.
SchAppMultiImageMaster
object
Interface to manage the master object in the Multi-Image-Object concept.
SchAppObjectFactory
object
Application factory to create application objects.
SchAppObjectFactory2
object
Application factory to create application objects.
SchAppReplace
object
Manage a schematic component.
SchAppRoute
object
Manage a schematic route.
SchAppRoute2
object
Manage a schematic route.
SchAppScalingRule
object
Provide application rule of how to scale schematic objects.
SchAppZone
object
Manage a schematic zone.
SchArrowDisplay
object
Manage the graphical representation of a schematic route.
SchBaseFactory
object
Factory to create basic schematic objects.
SchBoundaryElem
object
Manage a boundary element of a schematic zone.
SchCatalogComponent
object
Manage a schematic component catalog.
SchCatalogRoute
object
Manage a schematic route catalog.
SchCntrConnect
object
Manage the a schematic connector.
SchCntrDocLink
object
Manage the on-off sheet connector.
SchCntrGraphic
object
Manage the graphical representation of a schematic connector.
SchCntrLocation
object
Manage the location of a schematic connector.
SchCompConnector
object
Manage the connectors of a schematic component.
SchCompFlow
object
Manage the internal flow of a schematic component.
SchCompGraphic
object
Manage the graphical representation of a schematic component.
SchCompGroupExt
object
Manage the graphical representation of a temporary group of schematic objects.
SchCompatible
object
Provides connecting rule to schematic objects.
SchComponent
object
Manage a schematic component.
SchComponent2
object
Manage a schematic component.
SchComponentGroup
object
Represents a temporary group of schematic objects for component placement.
SchConnectable
object
Represents schematic objects that can be connected to others.
SchDropOffView
object
Manage the drop off views in a schematic viewer.
SchFrameInfo
object
Manage the background view of a schematic viewer.
SchGRR
object
Manage the graphical representation of a schematic object.
SchGRRCntr
object
Manage the graphical representation of a schematic connector.
SchGRRComp
object
Manage the graphical representation of a schematic component.
SchGRRFactory
object
Factory to create graphical representations of schematic objects.
SchGRRRoute
object
Manage the graphical representations of a schematic route.
SchGRRRoute2
object
Manage the graphical representation of a schematic route.
SchGRRRouteAlternate
object
Manage the graphical styles for alternative route graphics.
SchGRRRouteEllipse
object
Manage the graphical representation of a schematic route.
SchGRRZone
object
Manage the graphical representation of a schematic zone.
SchGapDisplay
object
Manage the graphical representation of a schematic route.
SchInternalFlow
object
Represents the internal flow object in a schematic component.
SchListOfBSTRs
object
Represents a non-persistant list of character strings to be used with Schematic IDLs.
SchListOfDoubles
object
Represents a list of DOUBLEs to be used with Schematic IDLs.
SchListOfLongs
object
Represent a non-persistant list of LONGs to be used with schematic IDLs.
SchListOfObjects
object
Represent a non-persistant list of schematic objects.
SchMovable
object
Manage the transformation of a schematic component.
SchMovable2
object
Manage rotation of a schematic object.
SchNetworkAnalysis
object
Represents a schematic network.
SchObsoleteModel
object
Manage obsolete model elements.
SchPostReplace
object
Manage post component replacement behaviors.
SchReplace
object
Manage existing schematic component instances.
SchRoute
object
Manage a schematic route data.
SchRouteAlternateGraphic
object
Manage alternative graphical primitives of a schematic route.
SchRouteGraphic
object
Manage graphical primitives representing a schematic route.
SchRouteSymbol
object
Manage a symbol placed on a route.
SchSession
object
Represents a schematic session.
SchTempListFactory
object
Create temporary (non-persistent) lists to be used in VB environment.
SchUpdateInstances
object
Interface to update all component instances when the catalog reference component has been changed.
SchWorkbench
object
Represents a workbench on a schematic document.
SchZone
object
Manage zone boundaries.
SchZoneGraphic
object
Manage graphical representations of a schematic zone.
SchZoneMembership
object
Manage zone memberships.
SchematicExtension
object
Manage schematic extensions.
SchematicRoot
object
Represents the top node of the schematic object tree.
ScoringMode
property in object DrawingDimValue
Get dimension scoring mode.
Scratch
property in object ABQJob
Sets or returns or the path to the scratch directory.
Script
property in object FeatureGenerator
Returns or sets the script that describes what is to be generated.
ScriptText
property in object FunctScript
Get the ScriptText.
Scripts
property in object FunctGenScriptMgr
Get the Generative Scripts collection.
Search
method in object Selection
Finds an object in the document using the Edit/Search grammar.
SearchAlgoType
property in object DefaultAnnotation
Get the type of search algo to find geometry on which the annotation apply to.
SearchFacet
method in object FunctionalObject
Searches the Facet.
SearchFacet
method in object FunctionalAction
Searches the Facet.
SearchFacet
method in object FunctionalDescription
Searches the Facet.
SearchFacetByName
method in object FunctionalObject
Searches the Facet.
SearchFacetByName
method in object FunctionalAction
Searches the Facet.
SearchFacetByName
method in object FunctionalDescription
Searches the Facet.
SearchIntensity
property in object CollisionFreeWalk
Returns and sets the value for 'Search Intensity' in a collision free walk.
SearchSettingAtt
object
Represents the setting controller for the Search property tab page.
Search_List_Size
property in object MigrBatchSettingAtt
Retrieves or sets the size of the "Mapping Files Location for Retrieving" list.
Second
property in object HybridShapePlane2Lines
Role : Get the second line.
Second
property in object HybridShapePlane3Points
Returns or sets the second point.
SecondAngle
property in object Revolution
Returns the revolution second angle.
SecondAngleLaw
property in object HybridShapeSweepCircle
Returns or sets the second angle law useful in some circular sweep types.
SecondAngleLawInversion
property in object HybridShapeSweepCircle
Returns or sets the second angle law inversion information.
SecondComponentDirection
property in object SolidCombine
Returns or sets the direction of second component of SolidCombine.
SecondComponentProfile
property in object SolidCombine
Returns or sets the profile of second component of SolidCombine.
SecondContinuity
property in object HybridShapeConnect
Gets or Sets the continuity on second curve.
SecondCurve
property in object HybridShapeConnect
Gets or Sets the second reference curve.
SecondDirectionRepartition
property in object RectPattern
Returns the linear repartition along the second direction.
SecondDirectionRow
property in object RectPattern
Returns the position of the shape to be copied along the second linear direction.
SecondElem
property in object HybridShapeTrim
SecondElem
property in object HybridShapeCorner
Returns or sets the corner second reference element.
SecondElem
property in object HybridShapeFilletBiTangent
Returns or sets the Second support surface feature.
SecondElem
property in object HybridShapeFilletTriTangent
Returns or sets the Second support surface feature.
SecondElement
property in object HybridShapeRotate
Returns or sets the second element defining the rotation angle.
SecondFace
property in object FaceFillet
Returns or sets the second limiting face.
SecondFace
property in object TritangentFillet
Returns the second face limiting the tritangent fillet.
SecondGroup
property in object Clash
Returns or sets the second group used by the computation.
SecondGroup
property in object Distance
Returns or sets the second group used by the computation.
SecondGuideCrv
property in object HybridShapeSweepLine
Returns or sets the sweep operation second guide curve.
SecondGuideCrv
property in object HybridShapeSweepConic
Returns or sets the second guide curve.
SecondGuideCrv
property in object HybridShapeSweepCircle
Returns or sets the sweep operation second guide curve.
SecondGuideCrv
property in object HybridShapeSweepExplicit
Gets the second guide curve (optional).
SecondGuideSurf
property in object HybridShapeSweepLine
Returns or sets the sweep operation second guide surface.
SecondLawRelimiter
property in object HybridShapeFilletBiTangent
Gets or sets Law second relimiter for variable shape fillet with law management.
SecondLengthLaw
property in object HybridShapeSweepLine
Returns or sets second length law useful in some linear sweep types.
SecondLengthLawInversion
property in object HybridShapeSweepLine
Returns or sets whether the second length law has to be inverted.
SecondLimit
property in object Prism
Returns the second prism limit (one of the two).
SecondLimit
property in object AssemblyPocket
Returns the second pocket limit.
SecondLimitType
property in object HybridShapeExtrude
Returns or sets the Second limit type.
SecondOrientation
property in object RectPattern
Returns or sets whether the pattern is built towards the second direction orientation.
SecondOrientation
property in object HybridShapeTrim
SecondOrientation
property in object HybridShapeCorner
Returns or sets the orientation of the corner second reference element.
SecondOrientation
property in object HybridShapeConnect
Gets or Sets the orientation of second curve SecondOrientation = 1 : SameOrientation.
SecondOrientation
property in object HybridShapeFilletBiTangent
Returns or Sets the Second orientation used to specify fillet center position.
SecondOrientation
property in object HybridShapeFilletTriTangent
Returns or sets the Second orientation used to specify fillet center position.
SecondPoint
property in object HybridShapeRotate
Returns or sets the second point defining the rotation.
SecondPoint
property in object HybridShapeConnect
Gets or Sets the second reference point.
SecondPoint
property in object HybridShapeTranslate
Returns or sets the second point defining the translation.
SecondPoint
property in object HybridShapePointBetween
Returns or sets the second reference point.
SecondProduct
property in object Distance
Returns the product belonging to the second group that realizes the minimum distance.
SecondProduct
property in object Conflict
Returns the second product involved in the conflict.
SecondRectangularPatternParameters
property in object RectPattern
Returns or sets the rectangular pattern parameters required to define the pattern.
SecondTangentOrientation
property in object HybridShapeCorner
Returns or sets the tangent orientation of the corner second reference element.
SecondTension
property in object HybridShapeConnect
Returns the tension on the second curve making up the connect curve.
SecondTrimOption
property in object HybridShapeSweepLine
Returns or sets the trim option for the second tangency surface.
SecondUptoElem
property in object Line
Role : Gets the Second upto element of the line.
SecondUptoElement
property in object HybridShapeExtrude
Returns or sets the Second up-to element used to limit extrusion.
SectPattern
property in object FTASettingAtt
Returns or sets the Pattern of Visu setting parameter value.
SectPattern
property in object DMUTolSettingAtt
Returns or sets the Pattern of Visu setting parameter value.
Section
property in object StrMember
Returns or sets the section object.
Section
object
Represents the Section object.
Section
property in object Export3DXmlSettingAtt
SectionCoupling
property in object HybridShapeLoft
Returns or sets the type of coupling between sections of the loft.
SectionDiameter
property in object ArrangementRun
Returns or sets the SectionDiameter for an ArrangementRun object.
SectionDiameter
property in object ArrangementPathway
Returns or sets the SectionDiameter for an ArrangementPathway object.
SectionFill
property in object SectioningSettingAtt
Returns or sets the SectionFill parameter.
SectionHeight
property in object ArrangementRun
Returns or sets the SectionHeight for an ArrangementRun object.
SectionHeight
property in object ArrangementPathway
Returns or sets the SectionHeight for an ArrangementPathway object.
SectionHeight
property in object ArrangementBoundary
Returns or sets the SectionHeight for an ArrangementBoundary object.
SectionName
property in object StrSection
Returns the parameter defining the section name.
SectionPlane
property in object HybridShapeSection
Returns or sets the section plane.
SectionType
property in object ArrangementRun
Returns or sets the SectionType for an ArrangementRun object.
SectionType
property in object HybridShapeFilletBiTangent
Returns or Sets fillet section type.
SectionType
property in object ArrangementPathway
Returns or sets the Section for an ArrangementPathway object.
SectionType
property in object ArrangementBoundary
Returns or sets the SectionType for an ArrangementBoundary object.
SectionWidth
property in object ArrangementRun
Returns or sets the SectionWidth for an ArrangementRun object.
SectionWidth
property in object ArrangementPathway
Returns or sets the SectionWidth for an ArrangementPathway object.
SectionWidth
property in object ArrangementBoundary
Returns or sets the SectionWidth for an ArrangementBoundary object.
SectioningSettingAtt
object
The interface to access a CATIASectioningSettingAtt.
Sections
object
A collection of all Section objects currently managed by the application.
Sections
property in object SPAWorkbench
Returns the Sections collection.
SectionsCatalogPath
property in object PathESSRessourcesSettingAtt
Returns or sets the SectionsCatalogPath parameter.
SeeHiddenElements
property in object Document
Returns or sets the document's hidden elements visibility.
SelectBehavior
method in object BehaviorExtension
Selects and executes a behavior of the technological object.
SelectElement2
method in object Selection
Runs an interactive selection command.
SelectElement3
method in object Selection
Runs an interactive selection command, exhaustive version.
SelectElement4
method in object Selection
Runs an interactive selection command, enabling the selection in a non active document.
SelectPublishedGeometry
property in object FTASettingAtt
Returns or sets the Slect Published Geometry parameter.
SelectedElement
object
Represents an element contained by a Selection object.
Selection
object
Represents the selection.
Selection
property in object Document
Returns the current selection.
SelectionSets
object
Interface to manage the Selection Sets in a document.
SendToService
object
This interface allows to use 'Send To' functionalities through an API.
ServerStatisticsSettingAtt
object
Interface for Server statistic Controler Role : the server statistics controler manages the values of all or only a part of the attributes available for the thematic.
ServerTimeOut
property in object LicenseSettingAtt
Retrieves or Sets the server time out.
ServicePack
property in object SystemConfiguration
Returns the CATIA service pack number.
SessionStatisticsSettingAtt
object
Interface for Session statistic Controler Role : the session statistics controler manages the values of all or only a part of the attributes available for the thematic.
Set
property in object Capture
Retrieves tolerancing set the Capture belongs too.
SetASNavigationModeLock
method in object SimulationSettingAtt
Locks or unlocks the ASNavigationMode parameter.
SetASStepSizeLock
method in object SimulationSettingAtt
Locks or unlocks the ASStepSize parameter.
SetAbsDatas
method in object Shot
Set the data related to the shot.
SetAbsoluteAxisData
method in object Sketch
Sets the absolute axis of the sketch in 3D space.
SetAccelColorLock
method in object DevAnalysisSettingAtt
Locks or unlocks the AccelColor parameter.
SetAccelLimitLock
method in object DevAnalysisSettingAtt
Locks or unlocks the AccelLimit parameter.
SetAccelerationValue
method in object GenericMotionProfile
Set acceleration value of the Profile.
SetAccuracyProfile
method in object RobotMotion
Sets the Accuracy profile.
SetAccuracyType
method in object GenericAccuracyProfile
Set the accuracy type for the profile.
SetAccuracyValue
method in object GenericAccuracyProfile
Set accuracy value of the profile.
SetAccuratePickingModeLock
method in object VisualizationSettingAtt
Locks or unlocks the AccuratePickingMode setting parameter.
SetAccuratePickingWindowSizeLock
method in object VisualizationSettingAtt
Locks or unlocks the AccuratePickingWindowSize setting parameter.
SetActivate2DModeLock
method in object Layout2DSettingAtt
Locks or unlocks the Activate2DMode parameter.
SetActivationModeLock
method in object CacheSettingAtt
Locks or unlocks the Cache Activation mode.
SetActivationStateLock
method in object MemoryWarningSettingAtt
Locks or unlocks the activation mode of the memory warning mechanism.
SetActivationStateLock
method in object DisconnectionSettingAtt
Locks or unlocks the activation mode of automatic disconnection.
SetActivationStatus
method in object AnalysisImage
Activates oe deactivates an image.
SetActiveTask
method in object ActiveTask
Defines the Active Task for an activity for a particular Resource.
SetAdditionalSymbol
method in object DrawingWelding
Sets the additional symbol of the drawing welding.
SetAffiche_AttributLock
method in object MigrBatchSettingAtt
Locks or unlocks the "Display Report Attribute" setting parameter.
SetAlignVector
method in object SchCntrLocation
Set the current alignment vector of the connector.
SetAlignmentConnector
method in object PspPartConnector
Sets the Face connector.
SetAlignmentVector
method in object PspLightConnector
Sets the alignment direction of the connector.
SetAllChecksReportLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the AllChecksReport parameter.
SetAllJointsSpeedLock
method in object HtsJointSpeedSettingsAtt
Locks or unlocks the JointSpeed parameter.
SetAllResourceFilterLock
method in object VerifTabSettingAtt
Locks or unlocks the "View All Resources" parameter.
SetAllZBufferElementModeLock
method in object VisualizationSettingAtt
Locks or unlocks the AllZBufferElementMode setting parameter.
SetAllowDistortionsLock
method in object FTAInfraSettingAtt
Locks or unlocks the Allow Distorsions setting parameter value.
SetAlphabeticOrderLock
method in object FTASettingAtt
Locks or unlocks the AlphabeticOrder setting parameter value.
SetAlsoDeleteExclusiveParentsLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "AlsoDeleteExclusiveParents" parameter.
SetAlternateViewLock
method in object Export3DXmlSettingAtt
SetAmbientActivationLock
method in object VisualizationSettingAtt
Locks or unlocks the AmbientActivation setting parameter.
SetAnalysisCacheModeLock
method in object AnalysisGeneralSettingAtt
Locks or unlocks the flag.
SetAnalysisDisplayModeLock
method in object FTASettingAtt
Locks or unlocks the AnalysisDisplayMode parameter.
SetAnalysisLevelLock
method in object AnalysisSettingAtt
Locks or unlocks the AnalysisLevel parameter.
SetAnalysisLoadModeLock
method in object AnalysisGeneralSettingAtt
Locks or unlocks the flag.
SetAnalysisNamingAutoLock
method in object AnalysisGeneralSettingAtt
Locks or unlocks the flag.
SetAngle
method in object HybridShapeSweepLine
Sets the angle values useful in some linear sweep types.
SetAngle
method in object HybridShapeSweepCircle
Sets the angle values useful in some circular sweep types.
SetAngleLawTypes
method in object HybridShapeSweepCircle
Sets angle law types.
SetAngleLimitLock
method in object FittingSettingAtt
Locks or unlocks the AngleLimit parameter.
SetAngleLock
method in object IgesSettingAtt
Locks or unlocks the Angle setting parameter.
SetAngleMaxToleranceLock
method in object ToleranceSheetSettingAtt
Locks or unlocks the AngleMaxTolerance parameter.
SetAngleMinToleranceLock
method in object ToleranceSheetSettingAtt
Locks or unlocks the AngleMinTolerance parameter.
SetAnglePitchParam
method in object HybridShapeSpiral
Sets Angle pitch parameter.
SetAngleRadiusParam
method in object HybridShapeSpiral
Sets Angle radius parameters.
SetAngleRef
method in object HybridShapeSweepExplicit
Sets the angle value associated to the reference surface.
SetAngleStepLock
method in object ManipSettingAtt
Locks or unlocks the AngleStep parameter.
SetAngulaireGeneralTolClassLock
method in object FTASettingAtt
Locks or unlocks the Dimension general class parameter.
SetAngularAccelerationValue
method in object GenericMotionProfile
Set Angular acceleration value of the Profile.
SetAngularLaw
method in object HybridShapeSweepLine
Sets the angular law useful in some linear sweep types.
SetAngularSpeedValue
method in object GenericMotionProfile
Set Angular Speed value of the Profile.
SetAngularThreshold
method in object HybridShapeExtractMulti
Sets the AngularThreshold in the list of constraints at specified position.
SetAngularThresholdActivity
method in object HybridShapeExtractMulti
Sets the AngularThresholdActivity in the list of constraints at specified position.
SetAngularTolerance
method in object HybridShapeAssemble
Set the anglular tolerance.
SetAngularToleranceMode
method in object HybridShapeAssemble
Set the anglular tolerance mode.
SetAnimationLock
method in object Export3DXmlSettingAtt
Locks or unlocks the flag.
SetAnlAccelLimitLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlAccelLimit parameter.
SetAnlCautionZoneLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlCautionZone parameter.
SetAnlIOAnalysisLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlIOAnalysis parameter.
SetAnlIntDistLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlIntDist parameter.
SetAnlIntfLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlIntf parameter.
SetAnlLinAccelLimitLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlLinAccelLimit parameter.
SetAnlLinSpeedLimitLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlLinSpeedLimit parameter.
SetAnlMeasureLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlMeasure parameter.
SetAnlRotAccelLimitLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlRotAccelLimit parameter.
SetAnlRotSpeedLimitLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlRotSpeedLimit parameter.
SetAnlTravelLimitLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlTravelLimit parameter.
SetAnlVelocityLimitLock
method in object AnalysisSettingAtt
Locks or unlocks the AnlVelocityLimit parameter.
SetAnnotDimInvalidColor
method in object FTASettingAtt
Sets the AnnotDimInvalidColor parameter.
SetAnnotDimInvalidColorLock
method in object FTASettingAtt
Locks or unlocks the AnnotDimInvalidColor parameter.
SetAnnotDimInvalidLock
method in object FTASettingAtt
Retrieves environment informations for the AnnotDimInvalid parameter.
SetAnnotDimOnDeletedGeomColor
method in object FTASettingAtt
Sets the AnnotDimOnDeletedGeomColor parameter.
SetAnnotDimOnDeletedGeomColorLock
method in object FTASettingAtt
Locks or unlocks the AnnotDimOnDeletedGeomColor parameter.
SetAnnotDimOnDeletedGeomLock
method in object FTASettingAtt
Locks or unlocks the AnnotDimOnDeletedGeom parameter.
SetAnnotDimOnUnloadedGeomColor
method in object FTASettingAtt
Sets the AnnotDimOnUnloadedGeomColor parameter.
SetAnnotDimOnUnloadedGeomColorLock
method in object FTASettingAtt
Locks or unlocks the AnnotDimOnUnloadedGeomColor parameter.
SetAnnotDimOnUnloadedGeomLock
method in object FTASettingAtt
Locks or unlocks the AnnotDimOnUnloadedGeom parameter.
SetAnnotOnZeroZSettingLock
method in object FTASettingAtt
Locks or unlocks the AnnotOnZeroZSetting parameter.
SetAnnotatedViewLock
method in object Export3DXmlSettingAtt
SetAnnotation3DLock
method in object Export3DXmlSettingAtt
Locks or unlocks the flag.
SetAnnotation3DModeLock
method in object MultiCADSettingAtt
Locks or unlocks the Annotation3DMode parameter.
SetAntiAliasingModeLock
method in object VisualizationSettingAtt
Locks or unlocks the AntiAliasingMode setting parameter.
SetAntiAliasingOffsetLock
method in object VisualizationSettingAtt
Locks or unlocks the AntiAliasingOffset setting parameter.
SetApplicativeDataFilterLock
method in object TreeTabSettingAtt
Locks or unlocks the "Applicative Data" parameter.
SetApplyJoinLock
method in object IgesSettingAtt
Locks or unlocks the Apply Join setting parameter.
SetApplyLabelEffToAltChildLock
method in object MfgHubSettingAtt
Locks or unlocks the ApplyLabelEffToAltChild parameter.
SetArcSelectionActivationLock
method in object TreeVizManipSettingAtt
Locks or unlocks the arc-selection mode applied to the specification tree.
SetArea
method in object PrintArea
Sets a set of coordinates to define a rectangle print area.
SetArrangementNomenclature
method in object ArrangementProduct
Sets the nomenclature of the ArrangementProduct.
SetArrow
method in object SchArrowDisplay
Add arrow display attributes on the route.
SetAsDetail
method in object DrawingSheet
Sets the sheet as a detail sheet.
SetAskAnlModeLock
method in object AnalysisSettingAtt
Locks or unlocks the AskAnlMode parameter.
SetAssemble
method in object HybridShapeExtrapol
Sets whether extrapolation is to be assembled with extrapolated curve or surface.
SetAssignedViewerLock
method in object TreeTabSettingAtt
Locks or unlocks the "Assigned Viewer" parameter.
SetAsso_modeLock
method in object V4WritingSettingAtt
Locks or unlocks the Asso_mode setting parameter.
SetAssociatedToolTip
method in object HomePosition
Set the tool tip associated with the home position.
SetAthAnnotationLock
method in object SimulationSettingAtt
Locks or unlocks the AthAnnotation parameter.
SetAthDisableSimLock
method in object SimulationSettingAtt
Locks or unlocks the AthDisableSim parameter.
SetAthEndConditionLock
method in object SimulationSettingAtt
Locks or unlocks the AthEndCondition parameter.
SetAthHyperlinkLock
method in object SimulationSettingAtt
Locks or unlocks the AthHyperlink parameter.
SetAthSelAgentDlgLock
method in object SimulationSettingAtt
Locks or unlocks the AthSelAgentDlg parameter.
SetAthStateMgtLock
method in object SimulationSettingAtt
Locks or unlocks the AthStateMgt parameter.
SetAthTextMsgLock
method in object SimulationSettingAtt
Locks or unlocks the AthTextMsg parameter.
SetAthViewpointLock
method in object SimulationSettingAtt
Locks or unlocks the AthViewpoint parameter.
SetAttAPLock
method in object StepSettingAtt
Locks or unlocks the AttAP parameter.
SetAttASMGVPLock
method in object StepSettingAtt
Locks or unlocks the AttASMGVP parameter.
SetAttASMLock
method in object StepSettingAtt
Locks or unlocks the AttASM parameter.
SetAttAngleDefFitingLock
method in object StepSettingAtt
Locks or unlocks the AttAngleDefFiting parameter.
SetAttAnnotationLock
method in object StepSettingAtt
Locks or unlocks the AttAnnotation parameter.
SetAttFittingLock
method in object StepSettingAtt
Locks or unlocks the AttFitting parameter.
SetAttGVPCOPSLock
method in object StepSettingAtt
Locks or unlocks the AttGVP parameter.
SetAttGVPCOPSSAGLock
method in object StepSettingAtt
Locks or unlocks the AttGVPVA parameter.
SetAttGVPCOPSTolLock
method in object StepSettingAtt
Locks or unlocks the AttGVPVA parameter.
SetAttGVPCdGLock
method in object StepSettingAtt
Locks or unlocks the AttGVPCdG parameter.
SetAttGVPLock
method in object StepSettingAtt
Locks or unlocks the AttGVP parameter.
SetAttGVPVALock
method in object StepSettingAtt
Locks or unlocks the AttGVPVA parameter.
SetAttGroupModeLock
method in object StepSettingAtt
Locks or unlocks the AttGroupMode parameter.
SetAttHeaderAuthorLock
method in object StepSettingAtt
Locks or unlocks the AttHeaderAuthor parameter.
SetAttHeaderAuthorisationLock
method in object StepSettingAtt
Locks or unlocks the AttHeaderAuthorisation parameter.
SetAttHeaderDescriptionLock
method in object StepSettingAtt
Locks or unlocks the AttHeaderDescription parameter.
SetAttHeaderOrganisationLock
method in object StepSettingAtt
Locks or unlocks the AttHeaderOrganisation parameter.
SetAttIASMLock
method in object StepSettingAtt
Locks or unlocks the AttIASM parameter.
SetAttLayersFiltersLock
method in object StepSettingAtt
Locks or unlocks the AttLayersFilters parameter.
SetAttMultiCADLock
method in object StepSettingAtt
Locks or unlocks the AttMultiCAD parameter.
SetAttOptimizeC2Lock
method in object StepSettingAtt
Locks or unlocks the AttOptimizeC2 parameter.
SetAttReportLock
method in object StepSettingAtt
Locks or unlocks the AttReport parameter.
SetAttShowLock
method in object StepSettingAtt
Locks or unlocks the AttShow parameter.
SetAttTolDefOptFitLock
method in object StepSettingAtt
Locks or unlocks the AttTolDefOptFit parameter.
SetAttUnitsLock
method in object StepSettingAtt
Locks or unlocks the AttUnits parameter.
SetAttachedOwner
method in object TCPTrace
Sets the default attached owner of the trace.
SetAttachedOwner
method in object TCPTraceManager
Sets the default attached owner of the trace.
SetAttribute
method in object WIText
SetAttribute
method in object AnalysisMeshLocalSpecification
Sets the value corresponding to the given local specification.
SetAttributeValue
method in object ParameterProfiles
SetAttributeValueReal
method in object AMPTag
Function to set the value of the given real attribute on the given AMPTag.
SetAttributeValueString
method in object AMPTag
Function to set the value of the given string attribute on the given AMPTag.
SetAttributesFilterLock
method in object TreeTabSettingAtt
Locks or unlocks the "Attributes" parameter.
SetAuthorNameLock
method in object IgesSettingAtt
Locks or unlocks the AuthorName parameter.
SetAuthorOrganizationLock
method in object IgesSettingAtt
Locks or unlocks the AuthorOrganization parameter.
SetAutoCCPLock
method in object HtsCCPSettingAtt
Locks or unlocks the AutoCCP parameter.
SetAutoExpandActivationLock
method in object TreeVizManipSettingAtt
Locks or unlocks the automatic expand mode applied to the specification tree.
SetAutoLoadMfgCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the AutoLoadMfgCtx parameter.
SetAutoLoadSrvMfgCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the AutoLoadSrvMfgCtx parameter.
SetAutoLoadVolCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the AutoLoadVolCtx parameter.
SetAutoName
method in object ArrangementProduct
Causes the name of the ArrangementProduct automatically.
SetAutoPreviewModeLock
method in object AnalysisPostProSettingAtt
Locks or unlocks the AutoPreviewMode parameter.
SetAutoReframeFilterLock
method in object VerifTabSettingAtt
Locks or unlocks the "Auto Reframe" parameter.
SetAutoSaveLock
method in object GeneralSessionSettingAtt
Locks or unlocks the data save parameter.
SetAutoScrollActivationLock
method in object TreeVizManipSettingAtt
Locks or unlocks the automatic scrolling mode applied to the specification tree.
SetAutoSwitchToDesignModeLock
method in object AsmGeneralSettingAtt
Locks or unlocks the implicit switch from visualization mode to design mode setting parameter.
SetAutoUpdateModeLock
method in object AsmGeneralSettingAtt
Locks or unlocks the automatic update setting parameter.
SetAutoWalkActColorLock
method in object HtsTaskDisplaySettingAtt
Locks or unlocks the AutoWalkActColor parameter.
SetAutoWalkActLineTypeLock
method in object HtsTaskDisplaySettingAtt
Locks or unlocks the AutoWalkActLineType parameter.
SetAutoWalkActLineWeightLock
method in object HtsTaskDisplaySettingAtt
Locks or unlocks the AutoWalkActLineWeight parameter.
SetAuxAxesValues
method in object AMPTag
Function to set the auxilliary axes values of the given AMPTag.
SetAuxiliaryDrillViewerLock
method in object VisualizationSettingAtt
Locks or unlocks the AuxiliaryDrillViewer setting parameter.
SetAuxillaryAxisHome
method in object RobotMotion
Sets the underlying Auxillary device Home.
SetAuxillaryAxisValues
method in object RobotMotion
Sets the Auxillary device Joint values.
SetAxisSystemSizeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "AxisSystemSize" parameter.
SetAxisSysteme
method in object DrawingViewGenerativeBehavior
Defines an axis systeme in the view.
SetBKTAccessRightsLock
method in object BehaviorSettingAtt
Locks or unlocks the BKTAccessRights parameter.
SetBKTBehaviorOperationMessageLock
method in object BehaviorSettingAtt
Locks or unlocks the BKTBehaviorOperationMessage parameter.
SetBKTSpecificationTreeLock
method in object BehaviorSettingAtt
Locks or unlocks the BKTSpecificationTree parameter.
SetBackClippingPlaneLock
method in object Layout2DSettingAtt
Locks or unlocks the BackClippingPlane parameter.
SetBackFaceCullingModeLock
method in object VisualizationSettingAtt
Locks or unlocks the BackFaceCullingMode setting parameter.
SetBackgroundImageModeLock
method in object AnalysisReportingSettingAtt
Locks or unlocks the BackgroundImageMode parameter.
SetBackgroundRGB
method in object VisualizationSettingAtt
Sets the BackgroundRGB parameter.
SetBackgroundRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the BackgroundRGB setting parameter.
SetBaultText
method in object DrawingDimValue
Set bault text to dimension value.
SetBeepModeLock
method in object AnalysisSettingAtt
Locks or unlocks the BeepMode parameter.
SetBeginMeridianAngle
method in object HybridShapeSphere
Sets BeginMeridianAngle on the object.
SetBeginParallelAngle
method in object HybridShapeSphere
Sets BeginParallelAngle on the object.
SetBendData
method in object PspLightBend
Sets a list of bend radii.
SetBodiesUnderOperationsInTreeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "BodiesUnderOperationsInTree" parameter.
SetBodyHideInCaptureLock
method in object FTASettingAtt
Locks or unlocks the Dimension general class parameter.
SetBooleanAttribute
method in object E5Property
SetBorderEdgesModeLock
method in object VisualizationSettingAtt
Locks or unlocks the BorderEdgesMode setting parameter.
SetBorderEdgesRGB
method in object VisualizationSettingAtt
Sets the BorderEdgesRGB parameter.
SetBorderEdgesRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the BorderEdgesRGB setting parameter.
SetBorderEdgesThicknessLock
method in object VisualizationSettingAtt
Locks or unlocks the BorderEdgesThickness setting parameter.
SetBorderMode
method in object HybridShapeBlend
Sets the type of border to a limit of the blend.
SetBoundaries2DLColor
method in object Layout2DSettingAtt
Sets the Boundaries2DLColor parameter.
SetBoundaries2DLColorLock
method in object Layout2DSettingAtt
Locks or unlocks the Boundaries2DLColor parameter.
SetBoundaries2DLDisplayLock
method in object Layout2DSettingAtt
Locks or unlocks the Boundaries2DLDisplay parameter.
SetBoundaries2DLLineTypeLock
method in object Layout2DSettingAtt
Locks or unlocks the Boundaries2DLLineType parameter.
SetBoundaries2DLThicknessLock
method in object Layout2DSettingAtt
Locks or unlocks the Boundaries2DLThickness parameter.
SetBoundaryContinuity
method in object HybridShapeFill
Sets the continuity mode for a boundary at specified position in the Fill.
SetBoundingBoxSelectionModeLock
method in object VisualizationSettingAtt
Locks or unlocks the BoundingBoxSelectionMode setting parameter.
SetBox
method in object ThreeDCuts
Sets the RELATIVE box used for the 3D cut computation.
SetBoxDisplayLock
method in object MeasureSettingAtt
Locks or unlocks the BoxDisplay parameter.
SetBranchIDs
method in object MHILoadParameters
Sets the "subcompitem" IDs (oid) of the Branch.
SetBufferLength
method in object ManufacturingOutput
Set the number of lines of the buffer before it will be flushed (default is 200).
SetCATFTAChamferGeneralTolClassLock
method in object FTASettingAtt
Locks or unlocks the CATFTAChamferGeneralTolClass parameter.
SetCATFTAEdgesColor
method in object FTASettingAtt
Sets the GetCATFTAEdgesColor parameter.
SetCATFTAEdgesColorLock
method in object FTASettingAtt
Locks or unlocks the GetCATFTAEdgesColor parameter.
SetCATFTAEdgesLineTypeLock
method in object FTASettingAtt
Locks or unlocks the CATFTAEdgesLineType parameter.
SetCATFTAEdgesThicknessLock
method in object FTASettingAtt
Locks or unlocks the CATFTAEdgesThickness parameter.
SetCATFTAUFAutoTolerancingLock
method in object FTASettingAtt
Locks or unlocks the CATFTAUFAutoTolerancing parameter.
SetCATFTAUseLastTolerancesLock
method in object FTASettingAtt
Locks or unlocks the CATFTAUseLastTolerances parameter.
SetCacheMaxSizeMoLock
method in object CacheSettingAtt
Locks the paramater Cache maximum size.
SetCalibReferenceFile
method in object CalibOffsets
Set the reference calibration file.
SetCalledTask
method in object HumanCallTask
SetCalloutCreationDialogBoxLock
method in object Layout2DSettingAtt
Locks or unlocks the CalloutCreationDialogBox parameter.
SetCartesianTarget
method in object RobotMotion
Sets the Robot Cartesian target.
SetCautionColorLock
method in object DevAnalysisSettingAtt
Locks or unlocks the CautionColor parameter.
SetCautionZoneLock
method in object DevAnalysisSettingAtt
Locks or unlocks the CautionZone parameter.
SetCellAlignment
method in object DrawingTable
Sets the pointed cell alignment of a drawing table.
SetCellBorderType
method in object DrawingTable
Sets the pointed cell border type of a drawing table.
SetCellName
method in object DrawingTable
Sets the name of a table cell.
SetCellObject
method in object DrawingTable
Sets an object in a cell of a drawing table.
SetCellString
method in object DrawingTable
Fills in a table cell with a string.
SetCentroid
method in object GenericToolProfile
Set the tool centroid of Profile.
SetCheckReportHtmlLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the CheckReportHtml parameter.
SetChoiceNbSurfaces
method in object HybridShapeSweepLine
Sets a sequence which identifies a solution amongst all possibilities of a line-profile swept surface, case CATGSMLinearSweep_TwoTangencySurfaces.
SetChoiceNo
method in object HybridShapeSweepLine
Sets the choice number associated with each solution of a given linear sweep case.
SetChoiceNo
method in object HybridShapeLineBiTangent
Sets a sequence which identifies a solution among all possibilities.
SetClashModeLock
method in object ManipSettingAtt
Locks or unlocks the ClashMode parameter.
SetClashSoundLock
method in object ManipSettingAtt
Locks or unlocks the ClashSound parameter.
SetClashWhileMovingLock
method in object FittingSettingAtt
Locks or unlocks the ClashWhileMoving parameter.
SetCleanTolCheckLock
method in object V4WritingSettingAtt
Locks or unlocks the CleanTolCheck setting parameter.
SetCleanTolValueLock
method in object V4WritingSettingAtt
Locks or unlocks the CleanTolValue setting parameter.
SetClearanceVoxelLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the ClearanceVoxel parameter.
SetClip
method in object DrawingDimension
Creates a clip on the dimension at the given point, with respect to the side given by iKeptSide.
SetClippingFrameLock
method in object Layout2DSettingAtt
Locks or unlocks the ClippingFrame parameter.
SetClippingFrameReframeOnModeLock
method in object Layout2DSettingAtt
SetClippingModeLock
method in object SectioningSettingAtt
Locks or unlocks the ClippingMode parameter.
SetClippingViewOutlineColor
method in object Layout2DSettingAtt
Sets the ClippingViewOutlineColor parameter.
SetClippingViewOutlineColorLock
method in object Layout2DSettingAtt
Locks or unlocks the ClippingViewOutlineColor parameter.
SetClippingViewOutlineLinetypeLock
method in object Layout2DSettingAtt
Locks or unlocks the ClippingViewOutlineLinetype parameter.
SetClippingViewOutlineThicknessLock
method in object Layout2DSettingAtt
Locks or unlocks the ClippingViewOutlineThickness parameter.
SetClosedContourSide
method in object ManufacturingPrismaticMachiningArea
Sets the side of one closed contour of a Manufacturing Prismatic Machining Area.
SetClosing
method in object HybridShapeSpline
Activates the closing option of the spline.
SetClosingPoint
method in object HybridShapeBlend
Sets a new closing point to a closed curve of the blend.
SetCode_pageLock
method in object InteropSettingAtt
Locks or unlocks the "Reading Code page" setting parameter.
SetCode_page_DestLock
method in object V4WritingSettingAtt
Locks or unlocks the Code_page_Dest setting parameter.
SetCollWalkClearanceLock
method in object HtsGeneralSettingAtt
SetCollapseExpandFilterLock
method in object TreeTabSettingAtt
Locks or unlocks the "Disable Collapse/Expand" parameter.
SetCollisionSearchIntensityLock
method in object HtsGeneralSettingAtt
SetColor
method in object TCPTrace
Set the TCP trace component (DNBTCPTraceReps) color.
SetColorBackgroundModeLock
method in object VisualizationSettingAtt
Locks or unlocks the ColorBackgroundMode setting parameter.
SetColorSynchronizationEditabilityLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ColorSynchronizationEditability" parameter.
SetColorSynchronizationModeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ColorSynchronizationMode" parameter.
SetColumnSize
method in object DrawingTable
Sets the width of a column of a drawing table.
SetCompanionPathLock
method in object DocumentationSettingAtt
Locks or unlocks the User Companion location parameter.
SetCompassPosLock
method in object HtsCCPSettingAtt
Locks or unlocks the CompassPos parameter.
SetComplementaryExtractMulti
method in object HybridShapeExtractMulti
Sets the Complementary flag checked/unchecked in the list of constraints at specified position.
SetComponents
method in object Position
Sets the components of an object's position.
SetConferencingLock
method in object GeneralSessionSettingAtt
Locks or unlocks the conference driver parameter.
SetConfig
method in object AMPTag
Function to set the config value of the given AMPTag.
SetConfig
method in object RobotMotion
Sets the Configuration for the robot motion.
SetConnex
method in object HybridShapeAssemble
Set the connex checker flag.
SetConstraintCreationModeLock
method in object AsmConstraintSettingAtt
Locks or unlocks the constraint creation setting parameter.
SetConstraintElement
method in object Constraint
Replaces an element of a constraint.
SetConstraintElement
method in object SWKIKConstraint
Set the target object to follow.
SetConstraintVisuLocation
method in object Constraint
Sets a new location for the constraint visualization.
SetConstraintsInGeometryLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ConstraintsInGeometry" parameter.
SetConstraintsNodeInTreeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ConstraintsNodeInTree" parameter.
SetConstraintsSimulLock
method in object HtsGeneralSettingAtt
Locks or unlocks the ConstraintsSimul parameter.
SetContextualFeaturesSelectableAtCreationLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ContextualFeaturesSelectableAtCreation" parameter.
SetContinuity
method in object HybridShapeBlend
Sets the continuity to a limit of the blend.
SetContourSide
method in object ManufacturingPrismaticMachiningArea
Sets the side of one contour of a Manufacturing Prismatic Machining Area.
SetConversionTechnologyLock
method in object MultiCADSettingAtt
Locks or unlocks the ConversionTechnology parameter.
SetConversion_TableLock
method in object InteropSettingAtt
Locks or unlocks the "Characters Equivalence Table Path" setting parameter.
SetCoordinates
method in object Point
Sets cartesian coordinates of the point.
SetCoords
method in object FunctionalPosition
Sets the coordinates.
SetCopyTransformation
method in object ManufacturingCopyTransformation
Set the 'Number of Copies', 'Ordering' and 'Transformation Type' of a Copy Tranformation.
SetCopyTransformationTranslationAttributes
method in object ManufacturingCopyTransformation
Set the 'Translation Type', 'Distance Along X', 'Distance Along Y' and 'Distance Along Z' of a Copy Tranformation which has a Translation as transformation.
SetCorrectedBaseOffset
method in object CalibOffsets
Set corrected base offset for the robot base wrt robot base reference position.
SetCorrectedToolOffset
method in object CalibOffsets
Set corrected tool offset for the robot wrt robot mount position.
SetCreateAssociativeUseEdgesLock
method in object Layout2DSettingAtt
Locks or unlocks the CreateAssociativeUseEdges parameter.
SetCreateNewSheetFromLock
method in object DraftingSettingAtt
Locks or unlocks the CreateNewSheetFrom parameter.
SetCreationMode
method in object HybridShapeRotate
Sets the creation mode(creation or modification).
SetCreationMode
method in object HybridShapeTranslate
Sets the creation mode(creation or modification).
SetCrvModLock
method in object IgesSettingAtt
Locks or unlocks the Export BSpline mode setting parameter.
SetCurrentAccuracyProfile
method in object RobGenericController
Make Accuracy profile with given name as current tool profile being used by controller.
SetCurrentApplicationID
method in object SchSession
Set the current application ID.
SetCurrentConstraintSet
method in object MoveToPostureActivity
SetCurrentDocument
method in object SchSession
Set the current document.
SetCurrentFormat
method in object AssemblyConvertor
Defines the properties that will be used in the print method.
SetCurrentMotionProfile
method in object RobGenericController
Make Motion profile with given name as current tool profile being used by controller.
SetCurrentObjFrameProfile
method in object RobGenericController
Make ObjFrame profile with given name as current ObjFrame profile being used by controller.
SetCurrentObject
method in object ManufacturingOutputGenerator
Set current object to buffer.
SetCurrentOccurrence
method in object AnalysisImage
Sets occurrence number for an image.
SetCurrentPosLock
method in object HtsCCPSettingAtt
Locks or unlocks the CurrentPos parameter.
SetCurrentToolProfile
method in object RobGenericController
Make tool profile with given name as current tool profile being used by controller.
SetCurvatureThreshold
method in object HybridShapeExtractMulti
Sets the CurvatureThreshold in the list of constraints at specified position.
SetCurvatureThresholdActivity
method in object HybridShapeExtractMulti
Sets the CurvatureThresholdActivity in the list of constraints at specified position.
SetCurve
method in object HybridShapeBlend
Sets a curve to the blend.
SetCustomBackgroundImageLock
method in object AnalysisReportingSettingAtt
Locks or unlocks the CustomBackgroundImage parameter.
SetCustomImageFormatLock
method in object AnalysisReportingSettingAtt
Locks or unlocks the CustomImageFormat parameter.
SetCustomImageHeightLock
method in object AnalysisReportingSettingAtt
Locks or unlocks the CustomImageHeight parameter.
SetCustomImageWidthLock
method in object AnalysisReportingSettingAtt
Locks or unlocks the ImageWidth parameter.
SetDLName
method in object DLNameSettingAtt
Sets the mapping between a logical name and the physical path.
SetDLNameCreationRightLock
method in object DLNameSettingAtt
Locks or unlocks the parameter DLNameCreationRight.
SetDLNameLock
method in object DLNameSettingAtt
Locks or unlocks the DLName.
SetDMUClashPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUClashPreview parameter.
SetDMUCut3DPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUCut3DPreview parameter.
SetDMUDistancePreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUDistancePreview parameter.
SetDMUFreeSpacePreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUFreeSpacePreview parameter.
SetDMUGroupPreviewHiddenObjectsColor
method in object N4DNavigatorSettingAtt
Sets the color for the display of hidden objects in DMU Group Preview.
SetDMUGroupPreviewHiddenObjectsColorLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUGroupPreviewHiddenObjectsColor parameter.
SetDMUGroupPreviewHiddenObjectsDisplayModeLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUGroupPreviewHiddenObjectsDisplayMode parameter.
SetDMUGroupPreviewHiddenObjectsLowIntLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUGroupPreviewHiddenObjectsLowInt parameter.
SetDMUGroupPreviewHiddenObjectsOpacityLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUGroupPreviewHiddenObjectsOpacity parameter.
SetDMUGroupPreviewHiddenObjectsPickLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUGroupPreviewHiddenObjectsPick parameter.
SetDMUGroupPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUGroupPreview parameter.
SetDMUMergerPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUMergerPreview parameter.
SetDMUOffsetPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUOffsetPreview parameter.
SetDMUReviewNameLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUReviewName parameter.
SetDMUSectionPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUSectionPreview parameter.
SetDMUShuttlePreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUShuttlePreview parameter.
SetDMUSilhouettePreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUSilhouettePreview parameter.
SetDMUSimplifPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUSimplifPreview parameter.
SetDMUSweptVolPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUSweptVolPreview parameter.
SetDMUThicknessPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUThicknessPreview parameter.
SetDMUVibrationVolPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUVibrationVolPreview parameter.
SetDMUWrappingPreviewLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the DMUWrappingPreview parameter.
SetDOFActivation
method in object ABQDisplacementBC
SetDOFValues
method in object HomePosition
Set the DOF values for the home position.
SetData
method in object Line2D
SetData
method in object Point2D
SetData
method in object Circle2D
SetData
method in object Ellipse2D
SetData
method in object Parabola2D
SetData
method in object Hyperbola2D
SetDatas
method in object Shot
Set the data related to the shot.
SetDatumConnector
method in object PspPartConnector
Sets the Datum connector.
SetDedicatedFilterTypeLock
method in object Layout2DSettingAtt
Locks or unlocks the DedicatedFilterType parameter.
SetDeepSearchActivationLock
method in object SearchSettingAtt
Locks or unlocks the Deep Search Activation setting parameter.
SetDefaultAnalysisFlagLock
method in object AnalysisGeneralSettingAtt
Locks or unlocks the flag.
SetDefaultAnalysisTemplateLock
method in object AnalysisGeneralSettingAtt
Locks or unlocks the flag.
SetDefaultDiffuseAmbientCoefficientLock
method in object VisualizationSettingAtt
Locks or unlocks the DefaultDiffuseAmbientCoefficient setting parameter.
SetDefaultMacroLibraries
method in object MacrosSettingAtt
Sets the list of default macro libraries.
SetDefaultMacroLibrariesLock
method in object MacrosSettingAtt
Locks or unlocks the default macro libraries setting.
SetDefaultPowerInputContextPriorityLock
method in object SearchSettingAtt
Locks or unlocks the Default Power Input Context Priority setting parameter.
SetDefaultPowerInputContextScopeLock
method in object SearchSettingAtt
Locks or unlocks the Default Power Input Context Scope setting parameter.
SetDefaultPowerInputPrefixLock
method in object SearchSettingAtt
Locks or unlocks the Default Power Input Prefix setting parameter.
SetDefaultShininessLock
method in object VisualizationSettingAtt
Locks or unlocks the DefaultShininess setting parameter.
SetDefaultSpecularCoefficientLock
method in object VisualizationSettingAtt
Locks or unlocks the DefaultSpecularCoefficient setting parameter.
SetDefaultSpeedLock
method in object FittingSettingAtt
Locks or unlocks the DefaultSpeed parameter.
SetDefaultStyleSheetLock
method in object FASReportingSettingAtt
Locks or unlocks the "OLP Robot Program Directory" parameter.
SetDefaultTimeLock
method in object FittingSettingAtt
Locks or unlocks the DefaultTime parameter.
SetDefaultToleranceLock
method in object ToleranceSheetSettingAtt
Locks or unlocks the DefaultTolerance parameter.
SetDefaultWalkSpeedLock
method in object HtsGeneralSettingAtt
Locks or unlocks the DefaultWalkSpeed parameter.
SetDefinition
method in object PspLightPart
Set the points defining the light object.
SetDeleteWarningBoxLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "DeleteWarningBox" parameter.
SetDemoModeLock
method in object LicenseSettingAtt
Locks or unlocks the DemoMode setting parameter.
SetDesignModeLock
method in object DMUTolSettingAtt
Locks or unlocks the Design Mode setting parameter value.
SetDesignReviewLock
method in object Export3DXmlSettingAtt
Locks or unlocks the flag.
SetDesignTablesCopyDataLock
method in object KnowledgeSheetSettingAtt
Locks or unlocks the DesignTablesCopyData parameter.
SetDesignTablesSynchronizationLock
method in object KnowledgeSheetSettingAtt
Locks or unlocks the DesignTablesSynchronization parameter.
SetDetailingID
method in object MHILoadParameters
SetDetailsModeExplodeLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the Details Migration Mode setting parameter.
SetDetailsModeUsualLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the Details Migration Mode setting parameter.
SetDetailsModeWireframeLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the Details Migration Mode setting parameter.
SetDeviation
method in object HybridShapeAssemble
Set the deviation value.
SetDimAfterCreLock
method in object FTASettingAtt
Locks or unlocks the Dimension After Creaation parameter.
SetDimAfterModLock
method in object FTASettingAtt
Locks or unlocks the Dimension After Modification parameter.
SetDimBeforeCreLock
method in object FTASettingAtt
Locks or unlocks the Dimension Before Creation parameter.
SetDimBeforeModLock
method in object FTASettingAtt
Locks or unlocks the Dimension Before Modification parameter.
SetDimBlankingCreLock
method in object FTASettingAtt
Locks or unlocks the Dimension Blanking Creation parameter.
SetDimBlankingModLock
method in object FTASettingAtt
Locks or unlocks the Dimension Blanking Modification parameter.
SetDimConfigureSnappingLock
method in object FTASettingAtt
Locks or unlocks the DimConfigureSnapping parameter.
SetDimConstantOffsetLock
method in object FTASettingAtt
Locks or unlocks the Constant Offset parameter.
SetDimCreateOnLock
method in object FTASettingAtt
Locks or unlocks the DimCreateOn parameter.
SetDimLinePosValueLock
method in object FTASettingAtt
Locks or unlocks the Dimension Line Position Value parameter.
SetDimLineUpBaseAngleLock
method in object FTASettingAtt
Locks or unlocks the Dimension Line Up Base Angle parameter.
SetDimLineUpBaseLengthLock
method in object FTASettingAtt
Locks or unlocks the Dimension Line Up Base Length parameter.
SetDimLineUpCumulLock
method in object FTASettingAtt
Locks or unlocks the Dimension Line Up Cululated parameter.
SetDimLineUpFunnelLock
method in object FTASettingAtt
Locks or unlocks the Dimension Line Up Funnel parameter.
SetDimLineUpOffsetBetDimAngleLock
method in object FTASettingAtt
Locks or unlocks the DimLineUpOffsetBetDimAngle parameter.
SetDimLineUpOffsetBetDimLengthLock
method in object FTASettingAtt
Locks or unlocks the DimLineUpOffsetBetDimLength parameter.
SetDimLineUpOffsetToRefAngleLock
method in object FTASettingAtt
Locks or unlocks the DimLineUpOffsetToRefAngle parameter.
SetDimLineUpOffsetToRefLengthLock
method in object FTASettingAtt
Locks or unlocks the DimLineUpOffsetToRefLength parameter.
SetDimLineUpStackLock
method in object FTASettingAtt
Locks or unlocks the Dimension Line Up Stack parameter.
SetDimManualPositionningLock
method in object FTASettingAtt
Locks or unlocks the Manual Positionning parameter.
SetDimMove2dPartCreLock
method in object FTASettingAtt
Locks or unlocks the Dimension Move 2D Creation parameter.
SetDimMove2dPartModLock
method in object FTASettingAtt
Locks or unlocks the Dimension Move 2D Modification parameter.
SetDimMoveDimLineCreLock
method in object FTASettingAtt
Locks or unlocks the Dimension Move Dimension Line Creation parameter.
SetDimMoveDimLineModLock
method in object FTASettingAtt
Locks or unlocks the Dimension Move Dimension Line Modification parameter.
SetDimMoveLeaderCreLock
method in object FTASettingAtt
Locks or unlocks the Dimension leader Creation parameter.
SetDimMoveLeaderModLock
method in object FTASettingAtt
Locks or unlocks the Dimension leader modification parameter.
SetDimMoveSubPartLock
method in object FTASettingAtt
Locks or unlocks the DimMoveSubPart parameter.
SetDimMoveValueCreLock
method in object FTASettingAtt
Locks or unlocks the Dimension Move Value Creation parameter.
SetDimMoveValueModLock
method in object FTASettingAtt
Locks or unlocks the Dimension Move Value Modification parameter.
SetDimORunCreLock
method in object FTASettingAtt
Locks or unlocks the Dimension Over Run Creation parameter.
SetDimORunModLock
method in object FTASettingAtt
Locks or unlocks the Dimension Over Run Modification parameter.
SetDimOriDefaultSymbLock
method in object FTASettingAtt
Locks or unlocks the Dimension Orientation Default Symbol parameter.
SetDimSnappingLock
method in object FTASettingAtt
Locks or unlocks the Dimension Snapping parameter.
SetDimension
method in object ArrangementItemReservation
Sets the Dimensions of the ArrangementItemReservation.
SetDimensions
method in object BasicComponent
Sets the dimensions of the basic component.
SetDimensionsDisplayLock
method in object UnitsSheetSettingAtt
Locks or unlocks the DimensionsDisplay setting parameter.
SetDirect
method in object Publications
Valuates a publication object directly with the object it publishes.
SetDirection
method in object Hole
Sets the hole associative direction.
SetDirection
method in object Prism
Sets the prism associative direction.
SetDirection
method in object AssemblyHole
Sets the hole axis direction.
SetDirection
method in object AssemblyPocket
Sets the pocket associated direction.
SetDirectoryFile
method in object SendToService
Positions the destination directory.
SetDirectoryForInputXslLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the DirectoryForInputXsl parameter.
SetDirectoryOneFile
method in object SendToService
Allows positioning the destination directory for one given file to be copied.
SetDisplayAnlStatusLock
method in object AnalysisSettingAtt
Locks or unlocks the DisplayAnlStatus parameter.
SetDisplayBackAndCuttingPlaneLock
method in object Layout2DSettingAtt
Locks or unlocks the DisplayBackAndCuttingPlane parameter.
SetDisplayClippingOutlineLock
method in object Layout2DSettingAtt
Locks or unlocks the DisplayClippingOutline parameter.
SetDisplayCurrentScaleLock
method in object VisualizationSettingAtt
Locks or unlocks the SetStereoModeLock setting parameter.
SetDisplayCutInWireframeLock
method in object SectioningSettingAtt
Locks or unlocks the DisplayCutInWireframe parameter.
SetDisplayDrillListLock
method in object VisualizationSettingAtt
Locks or unlocks the DisplayDrillList setting parameter.
SetDisplayGeomOnScrollingLock
method in object TreeVizManipSettingAtt
Locks or unlocks the "display geometry on scrolling" mode.
SetDisplayGeometryAfterCurrentLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "DisplayGeometryAfterCurrent" parameter.
SetDisplayImmersiveDrillViewerLock
method in object VisualizationSettingAtt
Locks or unlocks the DisplayImmersiveDrillViewer setting parameter.
SetDisplayModeLock
method in object InteropSettingAtt
Retrieves information about the "Display only elements with Sensitive Attribute" setting parameter.
SetDisplayNameModeLock
method in object TreeTabSettingAtt
Locks or unlocks the "Display Name Mode" parameter.
SetDisplayOrderLock
method in object TreeTabSettingAtt
Locks or unlocks the 'Display Order' parameter.
SetDisplayProcessOrderLock
method in object TreeTabSettingAtt
Locks or unlocks the 'Display Order for Processes' parameter.
SetDisplayResetButtonLock
method in object DraftingSettingAtt
Locks or unlocks the DisplayResetButton parameter.
SetDisplayTrailingZerosLock
method in object UnitsSheetSettingAtt
SetDisplayV4Text3DLock
method in object InteropSettingAtt
Locks or unlocks the "Display 3D elements labels" setting parameter.
SetDistanceObjective
method in object HybridShapeHealing
Sets the distance objective for healing entity.
SetDistanceStepLock
method in object ManipSettingAtt
Locks or unlocks the DistanceStep parameter.
SetDistanceThreshold
method in object HybridShapeExtractMulti
Sets the DistanceThreshold in the list of constraints at specified position.
SetDistanceThresholdActivity
method in object HybridShapeExtractMulti
Sets the DistanceThresholdActivity in the list of constraints at specified position.
SetDlnameLock
method in object InteropSettingAtt
Locks or unlocks the "DLNAME" setting parameter.
SetDocLanguageLock
method in object DocumentationSettingAtt
Locks or unlocks the technical documentation language parameter.
SetDocumentContentAtCreationLock
method in object FunctionalSystemSettingAtt
Locks or unlocks the DocumentContentAtCreation parameter.
SetDoubleAttribute
method in object E5Property
SetDoubleUserAttribute
method in object Fastener
et the value of user attribute whoes name matches the input string.
SetDownloaderDirLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP Translator Directory setting parameter.
SetDownloaderLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP Translator setting parameter.
SetDraftFeatureMigrationModeLock
method in object SpecV4SettingAtt
Locks or unlocks the DraftFeatureMigrationMode setting parameter.
SetDragDropLock
method in object GeneralSessionSettingAtt
Locks or unlocks the drag & drop parameter.
SetDrawLock
method in object InteropSettingAtt
Locks or unlocks the "Open in Light Mode: 2D Data are not taken into account" setting parameter.
SetDrawingStandard
method in object SchematicRoot
Set the drawing standard.
SetDriverConfigurationPath
method in object PrintersSettingAtt
Sets the driver configuration file.
SetDriverConfigurationPathLock
method in object PrintersSettingAtt
Locks or unlocks the driver configuration file.
SetDuration
method in object Shot
Sets the duration (time) associated to a shot.
SetDynamicCullLock
method in object VisualizationSettingAtt
Locks or unlocks the DynamicCull setting parameter.
SetDynamicLODLock
method in object VisualizationSettingAtt
Locks or unlocks the DynamicLOD setting parameter.
SetEditDedicatedFilterDialogBoxLock
method in object Layout2DSettingAtt
Locks or unlocks the EditDedicatedFilterDialogBox parameter.
SetElem
method in object HybridShapeTrim
Modifies the trimmed feature at a given index.
SetElement
method in object HybridShapeExtractMulti
Sets the sub element used as init for the propagation.
SetElementProperties
method in object ABQGlobalElementAssignment
Sets the behavior and the modifier to given element type.
SetEnableAnlModeLock
method in object AnalysisSettingAtt
Locks or unlocks the EnableAnlMode parameter.
SetEnableHeartBeatLock
method in object RobAnalysisHeartBeatUsageSettingAtt
Locks or unlocks the SingularColor parameter.
SetEndFaceForClosing
method in object HybridShapeLoft
Sets a face to the end section from the lofted surface.
SetEndMeridianAngle
method in object HybridShapeSphere
Sets EndMeridianAngle on the object.
SetEndParallelAngle
method in object HybridShapeSphere
Sets EndParallelAngle on the object.
SetEndParam
method in object HybridShapeIntegratedLaw
Sets end parameter.
SetEndPoint
method in object SchGRRRoute
Set the end point of the route graphic.
SetEndSectionTangent
method in object HybridShapeLoft
Sets a tangent surface to the end section from the lofted surface.
SetEndTangentDirectionFlag
method in object HybridShapeConic
Sets the tangent direction orientation at the conic end point.
SetEngineInterfaceLock
method in object RenderingSettingAtt
Locks or unlocks the EngineInterface parameter.
SetEnumerateValues
method in object IntParam
Sets an array containing the different values that the real param can take in the case of multiple values.
SetEnumerateValues
method in object StrParam
Sets an array containing the different values that the StrParam object can take in the case of multiple values.
SetEnumerateValues
method in object RealParam
Sets an array containing the different values that the real param can take in the case of multiple values.
SetExclusionRegions
method in object ABQRigidCoupling
Sets the exclusion regions for the coupling.
SetExclusionRegions
method in object ABQSmoothCoupling
Sets the exclusion regions for the coupling.
SetExistingTaskTreatmentLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP Existing Task Treatment On Upload parameter.
SetExpNotationValuesGreaterLock
method in object UnitsSheetSettingAtt
SetExpNotationValuesLowerLock
method in object UnitsSheetSettingAtt
SetExpandSketchBasedFeaturesNodeAtCreationLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
SetExplicitPolarity
method in object Thread
Sets the thread polarity explicit.
SetExportBackgroundColor
method in object VrmlSettingAtt
Sets the ExportBackgroundColor parameter (Background color of exported Vrml files).
SetExportBackgroundColorLock
method in object VrmlSettingAtt
Locks or unlocks the ExportBackgroundColor setting parameter.
SetExportEdgesLock
method in object VrmlSettingAtt
Locks or unlocks the ExportEdges setting parameter.
SetExportMSBOLock
method in object IgesSettingAtt
Locks or unlocks the Export Solid Mode setting parameter.
SetExportNormalsLock
method in object VrmlSettingAtt
Locks or unlocks the ExportNormals setting parameter.
SetExportTextureFileLock
method in object VrmlSettingAtt
Locks or unlocks the ExportTextureFile setting parameter.
SetExportTextureFormatLock
method in object VrmlSettingAtt
Locks or unlocks the ExportTextureFormat setting parameter.
SetExportTextureLock
method in object VrmlSettingAtt
Locks or unlocks the ExportTexture setting parameter.
SetExportUnitLock
method in object IgesSettingAtt
Locks or unlocks the Export Units setting parameter.
SetExportVersionLock
method in object VrmlSettingAtt
Locks or unlocks the ExportVersion setting parameter.
SetExternalMaxDeformationLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the "External Control Point Maximum Deformation" setting parameter.
SetExternalReferences
method in object MacrosSettingAtt
Sets the list of external references.
SetExternalReferencesAsVisibleLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ExternalReferencesAsVisible" parameter.
SetExternalReferencesAssemblyRootContextLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ExternalReferencesAssemblyRootContext" parameter.
SetExternalReferencesLock
method in object MacrosSettingAtt
Locks or unlocks the external references setting.
SetExternalReferencesNodeInTreeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ExternalReferencesNodeInTree" parameter.
SetExternalTypeDeformationLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the activation mode with external deformation (Gap Healing).
SetExtremities
method in object FunctActionsGroup
Set coordinates of Input and Output extremities.
SetExtremityFromCoordinates
method in object StrMemberExtremity
Modifies the coordinates of the extremity defined by a point.
SetFaceConnector
method in object PspPartConnector
Sets Face connector.
SetFaceHLDrillLock
method in object VisualizationSettingAtt
Locks or unlocks the FaceHLDrill setting parameter.
SetFakeDimValue
method in object DrawingDimValue
Set fake value of dimension value.
SetFeature
method in object ManufacturingOperation
Associate a Machinable Feature to a Manufacturing Operation.
SetFederationPropagation
method in object HybridShapeAssemble
Sets the propagation mode of federation.
SetFeedSpeedAutoUpdate
method in object ManufacturingOperation
Set the Auto Update status for Feed Rate or Spindle Speed.
SetFeedrate
method in object ManufacturingToolMotion
Defines the feedrate of a Manufacturing Point to point ToolMotion.
SetFeedrateMagnitude
method in object ManufacturingOperation
Defines the magnitude of the feedrate values.
SetField
method in object Roughness
Set roughness field.
SetFilters
method in object MHILoadParameters
Specifies the filters to be applied while loading the project.
SetFinishSymbol
method in object DrawingWelding
Sets the finish symbol of the drawing welding.
SetFirstActLock
method in object HtsCCPSettingAtt
Locks or unlocks the FirstAct parameter.
SetFirstAngleLaw
method in object HybridShapeSweepCircle
Sets the first angle law useful in some circular sweep types.
SetFirstDirection
method in object RectPattern
Sets the first repartition direction.
SetFirstLengthDefinitionType
method in object HybridShapeSweepLine
Sets the first length definition type.
SetFirstLengthLaw
method in object HybridShapeSweepLine
Sets the first length law useful in some linear sweep types.
SetFittingPoints
method in object HybridShapeSweepExplicit
Sets the fitting points.
SetFlyByMode
method in object GenericAccuracyProfile
Switch On/Off Flyby mode.
SetFlyCollisionModeLock
method in object VisualizationSettingAtt
Locks or unlocks the FlyCollisionMode setting parameter.
SetFlyCollisionSphereRadiusLock
method in object VisualizationSettingAtt
Locks or unlocks the FlyCollisionSphereRadius setting parameter.
SetFlyCollisionTypeLock
method in object VisualizationSettingAtt
Locks or unlocks the FlyCollisionType setting parameter.
SetFlySensitivityLock
method in object VisualizationSettingAtt
Locks or unlocks the FlySensitivity setting parameter.
SetFlySpeedLock
method in object VisualizationSettingAtt
Locks or unlocks the FlySpeed setting parameter.
SetFlySpeedModeLock
method in object VisualizationSettingAtt
Locks or unlocks the FlySpeedMode setting parameter.
SetFollowGroundAltitudeLock
method in object VisualizationSettingAtt
Locks or unlocks the FollowGroundAltitude setting parameter.
SetFollowGroundModeLock
method in object VisualizationSettingAtt
Locks or unlocks the FollowGroundMode setting parameter.
SetFontName
method in object DrawingText
Sets the font size on a substring of the drawing text.
SetFontSize
method in object DrawingText
Sets the font size on a substring of the drawing text.
SetForceClearanceVoxelLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the ForceClearanceVoxel parameter.
SetForceVoxelLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the ForceVoxel parameter.
SetFormatDisplayFactor
method in object DrawingDimValue
Set format display factor of dimension value.
SetFormatMode
method in object GeneralStatisticsSettingAtt
Sets the format mode of the statistics thematic.
SetFormatName
method in object DrawingDimValue
Set format name of dimension value.
SetFormatPrecision
method in object DrawingDimValue
Set format precision of dimension value.
SetFormatType
method in object DrawingDimValue
Set format type of dimension value.
SetFormatUnit
method in object DrawingDimValue
Set format unit of dimension value.
SetFrame
method in object ReferenceFrame
Set Frame of the TPS.
SetFrequencyLock
method in object LicenseSettingAtt
Locks or unlocks the Frequency setting parameter.
SetFullSceneAntiAliasingModeLock
method in object VisualizationSettingAtt
Locks or unlocks the AntiAliasingMode setting parameter.
SetFunctionalActionPresentationLock
method in object FunctionalSystemSettingAtt
Locks or unlocks the FunctionalActionPresentation parameter.
SetFunnel
method in object DrawingDimExtLine
Set funnel infomation of dimension extension line.
SetGPSName
method in object DrawingViewGenerativeBehavior
Applies a set of generative parameters to the current view.
SetGRRName
method in object SchGRR
Set current name of the GRR.
SetGap
method in object DrawingDimExtLine
Set gap of dimension extension line.
SetGap
method in object SchGapDisplay
Add gap display attributes on the route.
SetGeneralTolClassLock
method in object FTASettingAtt
Locks or unlocks the Dimension general class parameter.
SetGeometries
method in object ManufacturingPrismaticMachiningArea
Sets or adds geometry in a collection of a specified type to a Manufacturing Prismatic Machining Area.
SetGeometry
method in object ManufacturingOperation
Assigns geometry to a Manufacturing Operation.
SetGeometry
method in object ManufacturingSurfaceGeomArea
Sets a geometry of a Manufacturing Surface NCGeometry feature.
SetGeometry
method in object ManufacturingPrismaticMachiningArea
Sets a geometry of a specified type to a Manufacturing Prismatic Machining Area.
SetGeometryOnSupport
method in object HybridShapeCircleCtrPt
Sets GeometryOnSupport of circle.
SetGeometryOnSupport
method in object HybridShapeCircleCtrRad
Sets GeometryOnSupport of circle.
SetGeometryOnSupport
method in object HybridShapeCircle2PointsRad
Sets GeometryOnSupport of circle.
SetGeometryRepresentationFormatLock
method in object Export3DXmlSettingAtt
Locks or unlocks the flag.
SetGlobalSpecification
method in object AnalysisMeshPart
Sets the value corresponding to the given global specification.
SetGotoPtPointCoordinates
method in object ManufacturingToolMotion
Defines coordinates on the ToolMotion.
SetGravityAxisLock
method in object VisualizationSettingAtt
Locks or unlocks the GravityAxis setting parameter.
SetGravityLock
method in object VisualizationSettingAtt
Locks or unlocks the Gravity setting parameter.
SetGridAutoFilteringLock
method in object SectioningSettingAtt
Locks or unlocks the GridAutoFiltering parameter.
SetGridAutoResizeLock
method in object SectioningSettingAtt
Locks or unlocks the GridAutoResize parameter.
SetGridDisplayLock
method in object FTAInfraSettingAtt
Locks or unlocks the Grid Display setting parameter value.
SetGridHeightStepLock
method in object SectioningSettingAtt
Locks or unlocks the GridHeightStep parameter.
SetGridPositionModeLock
method in object SectioningSettingAtt
Locks or unlocks the GridPositionMode parameter.
SetGridPrimarySpacingLock
method in object FTAInfraSettingAtt
Locks or unlocks the Grid Primary Spacing setting parameter value.
SetGridSecondaryStepLock
method in object FTAInfraSettingAtt
Locks or unlocks the Grid Secondary Step setting parameter value.
SetGridSnapPointLock
method in object FTAInfraSettingAtt
Locks or unlocks the Grid Snap Point setting parameter value.
SetGridStyleLock
method in object SectioningSettingAtt
Locks or unlocks the GridStyle parameter.
SetGridVPrimarySpacingLock
method in object FTAInfraSettingAtt
Locks or unlocks the GridV Primary Spacing setting parameter value.
SetGridVSecondaryStepLock
method in object FTAInfraSettingAtt
Locks or unlocks the GridV Secondary Step setting parameter value.
SetGridWidthStepLock
method in object SectioningSettingAtt
Locks or unlocks the GridWidthStep parameter.
SetGuideDeviation
method in object HybridShapeSweepLine
Sets the deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
SetGuideDeviation
method in object HybridShapeSweepConic
Sets deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
SetGuideDeviation
method in object HybridShapeSweepCircle
Sets the deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
SetGuideDeviation
method in object HybridShapeSweepExplicit
Sets deviation value (length) from guide curves allowed during sweeping.
SetHaloModeLock
method in object VisualizationSettingAtt
Locks or unlocks the HaloMode setting parameter.
SetHandler
method in object ABQRigidCoupling
Sets the handler for the coupling.
SetHandler
method in object ABQSmoothCoupling
Sets the handler for the coupling.
SetHandler
method in object ABQConcentratedForce
Sets the handler for the distributed load.
SetHandler
method in object ABQRigidBodyConstraint
Set the handler for the rigid body.
SetHandler
method in object ABQAnalyticalRigidSurface
Set the handler for the Analytical rigid surface.
SetHandlerFromPublication
method in object ABQRigidCoupling
Sets the handler for the coupling.
SetHandlerFromPublication
method in object ABQSmoothCoupling
Sets the handler for the coupling.
SetHandlerFromPublication
method in object ABQRigidBodyConstraint
Sets the handler for the Rigid body constraint.
SetHandlerFromPublication
method in object ABQAnalyticalRigidSurface
Sets the handler for the Analytical rigid surface.
SetHandlesRGB
method in object VisualizationSettingAtt
Sets the HandlesRGB parameter.
SetHandlesRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the HandlesRGB setting parameter.
SetHeight
method in object HybridShapeHelix
Sets the helix height.
SetHeightAndWidth
method in object FunctNodeGraphLayout
Sets the height and width.
SetHideIn3DLock
method in object Layout2DSettingAtt
Locks or unlocks the HideIn3D parameter.
SetHidePlaneLock
method in object SectioningSettingAtt
Locks or unlocks the HidePlane parameter.
SetHideResultLock
method in object SectioningSettingAtt
Locks or unlocks the HideResult parameter.
SetHighlightDefAnnotLock
method in object FTASettingAtt
Locks or unlocks the Highlight Def Annot parameter.
SetHomePosition
method in object BasicDevice
Set home position of the device.
SetHybridDesignModeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "HybridDesignMode" parameter.
SetHyperLinks
method in object WIText
SetID
method in object PspID
Sets ID for the object.
SetIDUniqueSetting
method in object LibTabSettingAtt
SetIDUniqueSettingLock
method in object LibTabSettingAtt
Locks or unlocks the "Unique Check" parameter.
SetIcon
method in object PertNode
SetIdeasComponentNameLock
method in object MultiCADSettingAtt
Locks or unlocks the IdeasComponentName parameter.
SetIdeasComponentTypeLock
method in object MultiCADSettingAtt
Locks or unlocks the IdeasComponentType parameter.
SetIdeasLibraryNameLock
method in object MultiCADSettingAtt
Locks or unlocks the IdeasLibraryName parameter.
SetIdeasPartNumberLock
method in object MultiCADSettingAtt
Locks or unlocks the IdeasPartNumber parameter.
SetIdeasProjectNameLock
method in object MultiCADSettingAtt
Locks or unlocks the IdeasProjectName parameter.
SetIdeasRevNumberLock
method in object MultiCADSettingAtt
Locks or unlocks the IdeasRevNumber parameter.
SetIdeasTessParamLock
method in object MultiCADSettingAtt
Locks or unlocks the IdeasTessParam parameter.
SetIdentifier
method in object AnalysisGlobalSensor
Sets the Physical type and sub physical type that will be computed by the sensor.
SetIdi3dAnnotationModeLock
method in object MultiCADSettingAtt
Locks or unlocks the Idi3dAnnotationMode parameter.
SetImageQualityModeLock
method in object AnalysisReportingSettingAtt
Locks or unlocks the ImageQualityMode parameter.
SetImageTextSizeLock
method in object AnalysisPostProSettingAtt
Locks or unlocks the ImageTextSize parameter.
SetImageTextStackingLock
method in object AnalysisPostProSettingAtt
Locks or unlocks the ImageTextStacking parameter.
SetImpliedResourceFilterLock
method in object VerifTabSettingAtt
Locks or unlocks the Xxx parameter.
SetImportAnnotationLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportAnnotation parameter.
SetImportBaseFrmLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportBaseFrm parameter.
SetImportCollisionLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportCollision parameter.
SetImportConfigFileLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportConfigFile parameter.
SetImportCoorsysLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportCoorsys parameter.
SetImportCreaseAngleLock
method in object VrmlSettingAtt
Locks or unlocks the ImportCreaseAngle setting parameter.
SetImportEdgeLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportEdge parameter.
SetImportFloorLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportFloor parameter.
SetImportGroupAsSelSetLock
method in object IgesSettingAtt
Locks or unlocks the Import Selection Set mode setting parameter.
SetImportLibraryLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportLibrary parameter.
SetImportPDBCacheLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportPDBCache parameter.
SetImportRecordingLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportRecording parameter.
SetImportToolFrmLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportToolFrm parameter.
SetImportUnitLock
method in object VrmlSettingAtt
Locks or unlocks the ImportLock setting parameter.
SetImportUserAttrLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportUserAttr parameter.
SetImportUserViewsLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportUserViews parameter.
SetImportWclMessageLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportWclMessage parameter.
SetImportWclPathLock
method in object ImportD5SettingAtt
Locks or unlocks the ImportWclPath parameter.
SetInactivityDurationLock
method in object DisconnectionSettingAtt
Locks or unlocks the inactivity duration.
SetInertia
method in object GenericToolProfile
Set the underlying coefficient of the tool inertia.
SetInitialFile
method in object SendToService
Sets the initial file to be copied.
SetInitial_Model_File_PathLock
method in object V4WritingSettingAtt
Locks or unlocks the Initial_Model_File_Path setting parameter.
SetInsertLevelLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the InsertMode parameter.
SetInsertModeLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the InsertMode parameter.
SetInstanceAngularSpacing
method in object CircPattern
Sets the InstanceAngularSpacing.
SetInstanceSpacing
method in object RectPattern
Sets the InstanceSpacing.
SetIntUserAttribute
method in object Fastener
SetIntermediatePoint
method in object HybridShapeConic
Sets one of the conic intermediate passing points.
SetIntermediateTangent
method in object HybridShapeConic
Sets the tangent direction at one of the conic intermediate passing points.
SetIntermediateTangentDirectionFlag
method in object HybridShapeConic
Sets the tangent direction orientation of one of the conic intermediate points.
SetInternalMaxDeformationLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the "Internal Control Point Maximum Deformation" setting parameter.
SetInternalTypeDeformationLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the activation mode with internal deformation (Curve Improvement).
SetIsFederated
method in object HybridShapeExtractMulti
Sets the IsFederated flag checked/unchecked in the list of constraints at specified position.
SetIsoparGenerationModeLock
method in object VisualizationSettingAtt
Locks or unlocks the IsoparGenerationMode setting parameter.
SetIssueRepositoryPathLock
method in object MfgHubSettingAtt
Locks or unlocks the IssueRepositoryPath parameter.
SetItemToCopy
method in object ManufacturingPattern
Sets the feature to be copied.
SetItemsFilterLock
method in object TreeTabSettingAtt
Locks or unlocks the 'Items Folder' parameter.
SetItemsPerRelationFilterLock
method in object TreeTabSettingAtt
Locks or unlocks the 'Items Folde(Per Relation Type)r' parameter.
SetJavaClassPathLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP Java Class Path parameter.
SetJavaClassPathLock
method in object FASReportingSettingAtt
Locks or unlocks the "Java Class Path" parameter.
SetJavaExeLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP Java Executable parameter.
SetJavaExeLock
method in object FASReportingSettingAtt
Locks or unlocks the "Java Executable" parameter.
SetJointRelationExpression
method in object DeviceJointRelations
Set Kin expression for the given Joint.
SetJointTarget
method in object RobotMotion
Sets the Robot Joint target.
SetJointValues
method in object MoveToPostureActivity
Sets the Manikin's Position and Posture values with 137 doubles.
SetKeepAngleOption
method in object Sweep
Actives KeepAngleOption.
SetKeepSegmentationLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the KeepSegmentation setting parameter.
SetKeyboardRotationAngleValueLock
method in object VisualizationSettingAtt
Locks or unlocks the KeyboardRotationAngleValue setting parameter.
SetKnowledgeBuildPathDirectoryLock
method in object LanguageSheetSettingAtt
Locks or unlocks the CATKnowledgeBuildPath setting parameter.
SetKnowledgeInHybridDesignModeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "KnowledgeInHybridDesignMode" parameter.
SetLODModeLock
method in object CacheSettingAtt
Locks or unlocks the LOD generation mode.
SetLabelCode
method in object SchFrameInfo
Set the frame label code.
SetLabelColor
method in object MeasureSettingAtt
Sets the LabelColor parameter.
SetLabelColorLock
method in object MeasureSettingAtt
Locks or unlocks the LabelColor parameter.
SetLanguageEditor
method in object MacrosSettingAtt
Sets the editor path for the specified language.
SetLanguageEditorLock
method in object MacrosSettingAtt
Locks or unlocks the language editors setting.
SetLastActLock
method in object HtsCCPSettingAtt
Locks or unlocks the LastAct parameter.
SetLastObjectToGenerate
method in object ManufacturingGeneratorData
Sets the last Activity to generate.
SetLayer
method in object VisPropertySet
Sets the layer for the current selection.
SetLayer_for_No_AssoLock
method in object V4WritingSettingAtt
Locks or unlocks the Layer_for_No_Asso setting parameter.
SetLayoutDefaultRenderStyleLock
method in object Layout2DSettingAtt
Locks or unlocks the default render style parameter.
SetLeaderAssociativityLock
method in object FTAInfraSettingAtt
Locks or unlocks the Leader Associativity setting parameter value.
SetLegendsVisibility
method in object TCPTrace
Get the TCP trace component (DNBTCPTraceReps) legend visibility status.
SetLength
method in object HybridShapeSweepLine
Sets the linear values useful in some linear sweep types.
SetLengthLawTypes
method in object HybridShapeSweepLine
Sets length law types.
SetLengthMaxToleranceLock
method in object ToleranceSheetSettingAtt
Locks or unlocks the LengthMaxTolerance parameter.
SetLengthMinToleranceLock
method in object ToleranceSheetSettingAtt
Locks or unlocks the LengthMinTolerance parameter.
SetLengthType
method in object HybridShapeLinePtPt
Sets the length type Default is 0.
SetLengthType
method in object HybridShapeLinePtDir
Sets the length type Default is 0.
SetLengthType
method in object HybridShapeLineAngle
Sets the length type Default is 0.
SetLengthType
method in object HybridShapeLineNormal
Sets the length type Default is 0.
SetLengthType
method in object HybridShapeLineTangency
Sets the length type Default is 0.
SetLengthType
method in object HybridShapeLineBiTangent
Sets the length type Default is 0.
SetLengthType
method in object HybridShapeLineBisecting
Sets the length type Default is 0.
SetLicense
method in object LicenseSettingAtt
Sets the License.
SetLicenseLock
method in object LicenseSettingAtt
Locks or unlocks the License setting parameter.
SetLicenseLock
method in object DynLicenseSettingAtt
Locks or unlocks the License setting parameter.
SetLicensesListLock
method in object LicenseSettingAtt
Locks or unlocks the LicensesList setting parameter.
SetLicensesListLock
method in object DynLicenseSettingAtt
Locks or unlocks the LicensesList setting parameter.
SetLightViewerModeLock
method in object VisualizationSettingAtt
Locks or unlocks the LightViewerMode setting parameter.
SetLimitation
method in object HybridShapeCircle
Set the circle limitation type.
SetLinAccelColorLock
method in object RobAnalysisSettingAtt
Locks or unlocks the LinAccelColor parameter.
SetLinAccelLimitLock
method in object RobAnalysisSettingAtt
Locks or unlocks the LinAccelLimit parameter.
SetLinSpeedColorLock
method in object RobAnalysisSettingAtt
Locks or unlocks the LinSpeedColor parameter.
SetLinSpeedLimitLock
method in object RobAnalysisSettingAtt
Locks or unlocks the LinSpeedLimit parameter.
SetLineColor
method in object TCPTraceActivity
Indicates the line Color property of trace.
SetLineThickness
method in object TCPTraceActivity
Indicates the line thickness property of trace.
SetLineType
method in object TCPTraceActivity
Indicates the line type property of trace.
SetLineWidthLock
method in object MeasureSettingAtt
Locks or unlocks the LineWidth parameter.
SetLinearStiffness
method in object ABQSpringConnectionProperty
Sets the linear stiffness of the spring given the degree of freedom.
SetLineicCgrModeLock
method in object VisualizationSettingAtt
Locks or unlocks the v setting parameter.
SetLinkModeLock
method in object MultiCADSettingAtt
Locks or unlocks the LinkMode parameter.
SetLinkSendModeLock
method in object MfgHubSettingAtt
Locks or unlocks the LinkSendMode parameter.
SetLinkedExternalReferencesLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "LinkedExternalReferences" parameter.
SetLinkedExternalReferencesOnlyOnPublicationLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "LinkedExternalReferencesOnlyOnPublication" parameter.
SetLinkedExternalReferencesWarningAtCreationLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "LinkedExternalReferencesWarningAtCreation" parameter.
SetListOfLibraryFilePathLock
method in object LibTabSettingAtt
Locks or unlocks the list of libraries to be used Role :Locks or unlocks the "list of libraries" parameter if it is possible in the current administrative context.
SetListOfMagnitudesLock
method in object UnitsSheetSettingAtt
Locks or unlocks the ListOfMagnitudes setting parameter.
SetListOfPackagesToLoadLock
method in object LanguageSheetSettingAtt
Locks or unlocks the ListOfPackagesToLoad setting parameter.
SetLoad3dStateAndPosLock
method in object MfgHubSettingAtt
Locks or unlocks the Load3dStateAndPos parameter.
SetLoadAllChildProcMfgCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadAllChildProcMfgCtx parameter.
SetLoadAllPackagesLock
method in object LanguageSheetSettingAtt
Locks or unlocks the LoadAllPackages setting parameter.
SetLoadAssocPrdResChildLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadAssocPrdResChild parameter.
SetLoadChildProcMfgCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadChildProcMfgCtx parameter.
SetLoadCtxWithFileGeometryLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadCtxWithFileGeometry parameter.
SetLoadDispMfgCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadDispMfgCtx parameter.
SetLoadENVGeomFromENVdbLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadENVGeomFromENVdb parameter.
SetLoadExtendedLanguageLibLock
method in object LanguageSheetSettingAtt
Locks or unlocks the LoadExtendedLanguageLib setting parameter.
SetLoadFeedProcMfgCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the SaveV5CalcTime parameter.
SetLoadMfgAssmblyLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadMfgAssmbly parameter.
SetLoadMfgKitsLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadMfgKits parameter.
SetLoadPSSDataLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadPSSData parameter.
SetLoadPrdResUserAttribsLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadPrdResUserAttribs parameter.
SetLoadResGeoLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadResGeo parameter.
SetLoadUnconstrainedMfgCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the LoadUnconstrainedMfgCtx parameter.
SetLocalCsysFromPublication
method in object ABQGravity
Sets the published local coordinate system of the gravity load.
SetLocalCsysFromPublication
method in object ABQRigidCoupling
Sets the published local coordinate system for the coupling.
SetLocalCsysFromPublication
method in object ABQDisplacementBC
Sets the published local coordinate system of the Displacement BC.
SetLocalCsysFromPublication
method in object ABQSmoothCoupling
Sets the published local coordinate system for the coupling.
SetLocalCsysFromPublication
method in object ABQConcentratedForce
Sets the published local coordinate system of the concentrated force.
SetLocalPathLock
method in object CacheSettingAtt
Locks or unlocks the cache local path parameter.
SetLocalToolAxis
method in object ManufacturingPattern
Sets a local tool axis to a point of a Manufacturing Pattern.
SetLocation
method in object PertNode
This method place the PertNode in the PERT Chart at any location by specifying the X and Y Coordinates in the Grid.
SetLockAssignedPrdOnLoadLock
method in object MfgHubSettingAtt
Locks or unlocks the LockAssignedPrdOnLoad parameter.
SetLockUserDefaultLock
method in object DraftingSettingAtt
Locks or unlocks the LockUserDefault parameter.
SetLogicalActFilterLock
method in object TreeTabSettingAtt
Locks or unlocks the "Logical Activities" parameter.
SetLogicalDataAttrListLock
method in object PlugMapViewSettingAtt
Locks or unlocks the LogicalDataAttrList parameter.
SetLongAttribute
method in object E5Property
SetLongitudinalRelimiters
method in object HybridShapeSweepLine
SetLongitudinalRelimiters
method in object HybridShapeSweepConic
SetLongitudinalRelimiters
method in object HybridShapeSweepCircle
SetLongitudinalRelimiters
method in object HybridShapeSweepExplicit
SetMTPActColorLock
method in object HtsTaskDisplaySettingAtt
Locks or unlocks the MTPActColor parameter.
SetMTPActSymbolLock
method in object HtsTaskDisplaySettingAtt
Locks or unlocks the MTPActSymbol parameter.
SetMachiningDirection
method in object ManufacturingActivity
Defines the Machining Direction coordinates of a Manufacturing Operation.
SetMagnitudeValues
method in object UnitsSheetSettingAtt
Sets the Magnitude parameters.
SetMailClientLaunchModeLock
method in object MfgHubSettingAtt
Locks or unlocks the MailClientLaunchMode parameter.
SetManRefSizLock
method in object FTAInfraSettingAtt
Locks or unlocks the Manipulator Reference Size setting parameter value.
SetManZooCapLock
method in object FTAInfraSettingAtt
Locks or unlocks the Manipulator Zoom Capability setting parameter value.
SetManifold
method in object HybridShapeAssemble
Set the manifold checker flag.
SetManipAutoInsertLock
method in object ManipSettingAtt
Locks or unlocks the ManipAutoInsert parameter.
SetMapping_File_Save_ModeLock
method in object MigrBatchSettingAtt
Locks or unlocks the "Mapping Files Location for Saving" setting parameter.
SetMapping_Saving_FileLock
method in object MigrBatchSettingAtt
Locks or unlocks the "Specified Directory" setting parameter.
SetMarker2DAutoNamingLock
method in object MarkerSettingAtt
Locks or unlocks the Marker2DAutoNaming parameter.
SetMarker2DAutoNamingLock
method in object N4DNavigatorSettingAtt
SetMarker3DAutoNamingLock
method in object MarkerSettingAtt
Locks or unlocks the Marker3DAutoNaming parameter.
SetMarker3DAutoNamingLock
method in object N4DNavigatorSettingAtt
SetMarkerAutoUpdateLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the MarkerAutoUpdate parameter.
SetMarkerDefaultsColor
method in object MarkerSettingAtt
SetMarkerDefaultsColor
method in object N4DNavigatorSettingAtt
SetMarkerDefaultsColorLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerDefaultsColor parameter.
SetMarkerDefaultsColorLock
method in object N4DNavigatorSettingAtt
SetMarkerDefaultsDashedLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerDefaultsDashed parameter.
SetMarkerDefaultsDashedLock
method in object N4DNavigatorSettingAtt
SetMarkerDefaultsFontLock
method in object N4DNavigatorSettingAtt
SetMarkerDefaultsSizeLock
method in object N4DNavigatorSettingAtt
SetMarkerDefaultsWeightLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerDefaultsWeight parameter.
SetMarkerDefaultsWeightLock
method in object N4DNavigatorSettingAtt
SetMarkerTextColor
method in object N4DNavigatorSettingAtt
SetMarkerTextColor2D
method in object MarkerSettingAtt
Sets the default color of a 2D text annotation (iRed, iGreen, iBlue: RGB values for the desired color).
SetMarkerTextColor2DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerTextColor2D parameter.
SetMarkerTextColor3D
method in object MarkerSettingAtt
Sets the default color of a 3D text annotation (iRed, iGreen, iBlue: RGB values for the desired color).
SetMarkerTextColor3DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerTextColor3D parameter.
SetMarkerTextColorLock
method in object N4DNavigatorSettingAtt
SetMarkerTextDashed2DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerTextDashed parameter.
SetMarkerTextDashed3DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerTextDashed3D parameter.
SetMarkerTextDashedLock
method in object N4DNavigatorSettingAtt
SetMarkerTextDefaultsFont2DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerDefaultsFont2D parameter.
SetMarkerTextDefaultsFont3DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerDefaultsFont3D parameter.
SetMarkerTextDefaultsSize2DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerDefaultsSize2D parameter.
SetMarkerTextDefaultsSize3DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerDefaultsSize3D parameter.
SetMarkerTextWeight2DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerTextWeight2D parameter.
SetMarkerTextWeight3DLock
method in object MarkerSettingAtt
Locks or unlocks the MarkerTextWeight3D parameter.
SetMarkerTextWeightLock
method in object N4DNavigatorSettingAtt
SetMass
method in object GenericToolProfile
Set tool mass.
SetMatrix
method in object ThreeDCuts
Sets the rotation AND translation matrix.
SetMatrix
method in object DrawingComponent
Sets the matrix of the drawing component instance.
SetMaxAngleLock
method in object FittingSettingAtt
Locks or unlocks the MaxAngle parameter.
SetMaxCalculationTime
method in object SetOfEquation
Sets a maximum time to the model calculations.
SetMaxDisplayedResultsLock
method in object SearchSettingAtt
Locks or unlocks the Max Displayed Results setting parameter.
SetMaxPreHighlightedElementsLock
method in object SearchSettingAtt
Locks or unlocks the Max Displayed Results setting parameter.
SetMaxSelectionMoveLock
method in object VisualizationSettingAtt
Locks or unlocks the MaxSelectionMove setting parameter.
SetMaximumDeviation
method in object HybridShapeCurveSmooth
Sets the maximum deviation.
SetMeasureLock
method in object Export3DXmlSettingAtt
SetMemberColor
method in object ColorESSObjectSettingAtt
SetMemberColorLock
method in object ColorESSObjectSettingAtt
Locks or unlocks the MemberColor parameter.
SetMemberMaterialLock
method in object MaterialESSObjectSettingAtt
Locks or unlocks the MemberMaterial parameter.
SetMemberTypesLock
method in object TypeESSObjectSettingAtt
Locks or unlocks the MemberTypes parameter.
SetMemoryStopperStateLock
method in object MemoryWarningSettingAtt
Locks or unlocks the activation mode of the memory stopper mechanism.
SetMergingDistance
method in object HybridShapeHealing
Sets the Merging distance for healing entity.
SetMfgCtxPrevProcRelationTypeLock
method in object MfgHubSettingAtt
Locks or unlocks the GetMfgCtxPrevProcRelationType parameter.
SetMigration_FormatLock
method in object MigrBatchSettingAtt
Locks or unlocks the "Format" setting parameter.
SetMigration_InterfaceLock
method in object MigrBatchSettingAtt
Locks or unlocks the "Migration Interface" setting parameter.
SetMigration_TypeLock
method in object MigrBatchSettingAtt
Locks or unlocks the "Conversion" setting parameter.
SetMinimumFPSModeLock
method in object VisualizationSettingAtt
Locks or unlocks the MinimumFPSMode setting parameter.
SetMinimumSpaceFPSModeLock
method in object VisualizationSettingAtt
Locks or unlocks the MinimumSpaceFPSMode setting parameter.
SetModeCreateDisplayLock
method in object V4WritingSettingAtt
Locks or unlocks the ModeCreateDisplay setting parameter.
SetModeErrorDisplayLock
method in object V4WritingSettingAtt
Locks or unlocks the ModeErrorDisplay setting parameter.
SetModeImageTextSizeLock
method in object AnalysisPostProSettingAtt
Locks or unlocks the ModeImageTextSize parameter.
SetModel_DimensionLock
method in object V4WritingSettingAtt
Locks or unlocks the Model_Dimension setting parameter.
SetModel_FactorLock
method in object V4WritingSettingAtt
Locks or unlocks the Model_Factor setting parameter.
SetModel_File_NameLock
method in object V4WritingSettingAtt
Locks or unlocks the Model_File_Name setting parameter.
SetModel_UnitLock
method in object V4WritingSettingAtt
Locks or unlocks the Model_Unit setting parameter.
SetModifiableIn2DComponentInstances
method in object DrawingText
Sets the text as modifiable in 2D component instances.
SetMotionBasis
method in object GenericMotionProfile
Set motion basis of the Profile.
SetMotionProfile
method in object RobotMotion
Sets the Motion profile.
SetMotionType
method in object RobotMotion
Sets the type of Motion.
SetMouseDoubleClicDelayLock
method in object VisualizationSettingAtt
Locks or unlocks the MouseDoubleClicDelay setting parameter.
SetMouseSpeedValueLock
method in object VisualizationSettingAtt
Locks or unlocks the MouseSpeedValue setting parameter.
SetMoveAfterCreationLock
method in object FTAInfraSettingAtt
Locks or unlocks the Move After Creation setting parameter value.
SetMoveWithFixTExtendModeLock
method in object AsmGeneralSettingAtt
Locks or unlocks the setting parameter managing the extension of a move to the components involved in a FixTogether.
SetNCGeometry
method in object ManufacturingSurfaceMachiningArea
Sets a NCGeometry of a specified type to a Manufacturing Surface Machining Area.
SetNRLDirLock
method in object IgpOlpSettingAtt
Locks or unlocks the NRL configuration file directory setting parameter.
SetNRLTeachDialogDisplayModeLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLPNRLTeachDialogDisplay parameter.
SetName
method in object Tag
Sets name of the Tag.
SetName
method in object ParameterProfiles
SetName
method in object GenericToolProfile
Set name of the Tool Profile.
SetName
method in object GenericMotionProfile
Set name of the Motion Profile.
SetName
method in object RobGenericController
Set name of the generic controller.
SetName
method in object SchAppCntrName
Set the application connector name.
SetName
method in object GenericObjFrameProfile
Set name of the Object frame Profile.
SetName
method in object GenericAccuracyProfile
Set name of the Accuracy Profile.
SetName
method in object Task
SetNamedFilmCoeffAmplitude
method in object ABQFilmCondition
Sets the name of the amplitude that gives the variation of the the film coefficient with time.
SetNamedSinkAmplitude
method in object ABQFilmCondition
Sets the name of the amplitude that contains the variation of the sink temperature with time.
SetNamingModeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "NamingMode" parameter.
SetNbIsoparsLock
method in object VisualizationSettingAtt
Locks or unlocks the NbIsopars setting parameter.
SetNewPrinterDirectory
method in object PrintersSettingAtt
Sets the directory where new printers will be added.
SetNewPrinterDirectoryLock
method in object PrintersSettingAtt
Locks or unlocks the directory where printers will be added.
SetNewWith3DSupportLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "NewWith3DSupport" parameter.
SetNewWithAxisSystemLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "NewWithAxisSystem" parameter.
SetNewWithGSLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "NewWithGS" parameter.
SetNewWithOGSLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "NewWithOGS" parameter.
SetNewWithPanelLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "NewWithPanel" parameter.
SetNextOrientation
method in object HybridShapeTrim
Sets the orientation used to compute the feature, referring to the next trimmed element.
SetNextThickness
method in object TCPTraceManagerGraphics
Set the TCP trace component (DNBTCPTraceReps) thickness(for line, axis) for new points.
SetNextType
method in object TCPTraceManagerGraphics
Set the TCP trace component (DNBTCPTraceReps) type for new points.
SetNoShowBackgroundRGB
method in object VisualizationSettingAtt
Sets the No Show Background Color setting attribute value.
SetNoShowBackgroundRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the No Show Background Color setting attribute.
SetNoZBufferSelectionModeLock
method in object VisualizationSettingAtt
Locks or unlocks the NoZBufferSelectionMode setting parameter.
SetNoaCreationLock
method in object FTASettingAtt
Locks or unlocks the Noa Creation parameter.
SetNodelockAlertLock
method in object LicenseSettingAtt
Locks or unlocks the license expiry alert setting parameter.
SetNominalBaseOffset
method in object CalibOffsets
Set nominal base offset for the robot base wrt robot base reference position.
SetNominalToolOffset
method in object CalibOffsets
Set nominal tool offset for the robot wrt robot mount position.
SetNonLinearStiffness
method in object ABQSpringConnectionProperty
Sets the non-linear stiffness of the spring in the form of array, given the degree of freedom.
SetNonSemanticAllwaysUpgradeGeneralTolLock
method in object FTASettingAtt
Locks or unlocks the Non Semantic Allways Upgrade general tolerance parameter.
SetNonSemanticAllwaysUpgradeLock
method in object FTASettingAtt
Locks or unlocks the Non Semantic Allways Upgrade parameter.
SetNonSemanticDimAllowedLock
method in object FTASettingAtt
Locks or unlocks the Non Semantic Dim Allowed parameter.
SetNonSemanticMarkedLock
method in object FTASettingAtt
Locks or unlocks the Non Semantic Marked parameter.
SetNonSemanticTolAllowedLock
method in object FTASettingAtt
Locks or unlocks the Non Semantic Tol Allowed parameter.
SetNumUrlNameLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the NumUrlName parameter.
SetNumberOfMinimumFPSLock
method in object VisualizationSettingAtt
Locks or unlocks the NumberOfMinimumFPS setting parameter.
SetNumberOfMinimumSpaceFPSLock
method in object VisualizationSettingAtt
Locks or unlocks the NumberOfMinimumSpaceFPS setting parameter.
SetObjectFrame
method in object GenericObjFrameProfile
Set the underlying x,y,z, roll, pitch, yaw of the Object Frame.
SetObjectKeepingPosition
method in object Sampled
Sets the object in the sampled.
SetObjectPositions
method in object Marker3D
Sets the coordinates of the anchor point of the marker on the object.
SetObjectProfile
method in object RobotMotion
Sets the Object profile.
SetOcclusionCullingModeLock
method in object VisualizationSettingAtt
Locks or unlocks the OcclusionCullingMode setting parameter.
SetOfEquation
object
Represents the set of equations object.
SetOffset
method in object PlaceActivity
SetOffsetValue
method in object HybridShapeOffset
Set Offset value with input as double.
SetOnBorders
method in object ThreeDCuts
Sets the behavior on borders.
SetOnlyCurrentOperatedSolidSetInGeometryLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
SetOnlyCurrentSolidSetInGeometryLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "OnlyCurrentSolidSetInGeometry" parameter.
SetOnlyLoadCtxWithGeometryLock
method in object MfgHubSettingAtt
Locks or unlocks the OnlyLoadCtxWithGeometry parameter.
SetOnlyShowLock
method in object IgesSettingAtt
Locks or unlocks the Export only show setting parameter.
SetOpType
method in object AMPTag
Function to set the operation type of the given AMPTag.
SetOpaqueFacesLock
method in object VisualizationSettingAtt
Locks or unlocks the SetStereoModeLock setting parameter.
SetOpenContourSide
method in object ManufacturingPrismaticMachiningArea
Sets the side of one open contour of a Manufacturing Prismatic Machining Area.
SetOpenModeForLoadLock
method in object MfgHubSettingAtt
Locks or unlocks the OpenModeForLoad parameter.
SetOperatedObject
method in object BooleanShape
Modifies the Second Operand.
SetOperatingVolume
method in object BooleanShape
Swaps the operands.
SetOptC2ModeLock
method in object IgesSettingAtt
Locks or unlocks the Continuity Optimizationmode setting parameter.
SetOptCleanTopoModeLock
method in object IgesSettingAtt
Locks or unlocks the Clean Topo Mode setting parameter.
SetOptFittingModeLock
method in object IgesSettingAtt
Locks or unlocks the Fitting Mode setting parameter.
SetOptInvalidGeomModeLock
method in object IgesSettingAtt
Locks or unlocks the InvalidGeom mode setting parameter.
SetOptLoop3DModeLock
method in object IgesSettingAtt
Locks or unlocks the Force 3D Loop setting parameter.
SetOrder
method in object NavigatorWorkbench
Sets the order of an object.
SetOrientation
method in object HybridShapeBlend
Sets the orientation of a curve of the blend.
SetOrientation
method in object HybridShapeSplit
Sets the orientation used to compute the split.
SetOrientationConnector
method in object PspPartConnector
Sets Face connector.
SetOrientationLock
method in object TreeVizManipSettingAtt
Locks or unlocks the orientation applied to the specification tree.
SetOrientationMode
method in object RobotMotion
Sets the TCP Orientation Mode.
SetOrientationVector
method in object PspLightConnector
Sets the Orientation Direction of the connector.
SetOrigin
method in object Hole
Sets the origin point which the hole is anchored to.
SetOrigin
method in object PspLightConnector
Sets the position of the connector.
SetOriginCornerCode
method in object SchFrameInfo
Set the frame origin corner code.
SetOriginPoint
method in object ManufacturingMachiningAxis
Sets the Origin of a Manufacturing Machining Axis System used as Origin.
SetOriginPointByCoordinates
method in object ManufacturingMachiningAxis
Sets the Origin of a Manufacturing Machining Axis System used as Origin by coordinates.
SetOriginXDirection
method in object ManufacturingMachiningAxis
Sets the Origin X direction of a Manufacturing Machining Axis System used as Origin.
SetOriginZDirection
method in object ManufacturingMachiningAxis
Sets the Origin Z direction of a Manufacturing Machining Axis System used as Origin.
SetOtherSelectionTimeoutActivityLock
method in object VisualizationSettingAtt
Locks or unlocks the OtherSelectionTimeoutActivity setting parameter.
SetOtherSelectionTimeoutLock
method in object VisualizationSettingAtt
Locks or unlocks the OtherSelectionTimeout setting parameter.
SetOutputHeightLock
method in object RenderingSettingAtt
Locks or unlocks the OutputHeight parameter.
SetOutputPathLock
method in object RenderingSettingAtt
Locks or unlocks the OutputPath parameter.
SetOutputPathLock
method in object MultiCADSettingAtt
Locks or unlocks the OutputPath parameter.
SetOutputProductFilterLock
method in object TreeTabSettingAtt
Locks or unlocks the "Output Products Folder" parameter.
SetOutputSizeFromLock
method in object RenderingSettingAtt
Locks or unlocks the OutputSizeFrom parameter.
SetOutputTypeLock
method in object RenderingSettingAtt
Locks or unlocks the OutputType parameter.
SetOutputWidthLock
method in object RenderingSettingAtt
Locks or unlocks the OutputWidth parameter.
SetOverrun
method in object DrawingDimExtLine
Set overrun of dimension extension line.
SetPPRSaveConfigLock
method in object Export3DXmlSettingAtt
Locks or unlocks the flag.
SetPPWord
method in object ManufacturingToolMotion
Adds a line containing iMessage to a Manufacturing PP Word ToolMotion.
SetPROJECT_File_PathLock
method in object InteropSettingAtt
Locks or unlocks the "PROJECT File Path" setting parameter.
SetPSCycleTimeLock
method in object SimulationSettingAtt
Locks or unlocks the PSCycleTime parameter.
SetPSDynClashModeLock
method in object SimulationSettingAtt
Locks or unlocks the PSDynClashMode parameter.
SetPSGraphicSimStepLock
method in object SimulationSettingAtt
Locks or unlocks the PSGraphicSimStep parameter.
SetPSGraphicUpdateLock
method in object SimulationSettingAtt
Locks or unlocks the PSGraphicUpdate parameter.
SetPSText
method in object DrawingDimValue
Set PS text to dimension value.
SetPVEndConditionLock
method in object SimulationSettingAtt
Locks or unlocks the PVEndCondition parameter.
SetPVStateMgtLock
method in object SimulationSettingAtt
Locks or unlocks the PVStateMgt parameter.
SetPackAndGoRepositoryPathLock
method in object MfgHubSettingAtt
Locks or unlocks the PackAndGoRepositoryPath parameter.
SetPaperHeight
method in object DrawingSheet
Sets the paper width of the drawing sheet, avalaible on user format.
SetPaperWidth
method in object DrawingSheet
Sets the paper width of the drawing sheet, avalaible on user format.
SetParameterAsInput
method in object SetOfEquation
Specifies that the parameter must be considered as input parameter.
SetParameterAsOutput
method in object SetOfEquation
Specifies that the parameter must be considered as an output parameter.
SetParameterLaw
method in object HybridShapeSweepConic
Sets the parameter law that will be used in conic sweep operation.
SetParameterNameSurroundedByTheSymbolLock
method in object KnowledgeSheetSettingAtt
Locks or unlocks the ParameterNameSurroundedByTheSymbol parameter.
SetParameterOnSubString
method in object DrawingText
Sets a property on a substring of the drawing text.
SetParameterTreeViewWithFormulaLock
method in object KnowledgeSheetSettingAtt
Locks or unlocks the ParameterTreeViewWithFormula parameter.
SetParameterTreeViewWithValueLock
method in object KnowledgeSheetSettingAtt
Locks or unlocks the ParameterTreeViewWithValue parameter.
SetParametersInTreeLock
method in object FTASettingAtt
Locks or unlocks the Parameters in tree parameter.
SetParametersList
method in object WIBuyOff
SetParametersList
method in object WIDataCollection
SetParametersList
method in object WIChangeNotification
SetParametersNodeInTreeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ParametersNodeInTree" parameter.
SetPartAxisSystem
method in object ManufacturingMachiningAxis
Sets the Part Axis System of a Manufacturing Machining Axis System.
SetPartParametricAttributes
method in object PspBuildPart
Sets the part parametric attribute names.
SetPartProdModeLock
method in object IgesSettingAtt
Locks or unlocks the Import Product mode setting parameter.
SetPartRelation
method in object MoveToPostureActivity
DEPRECATED.
SetPartRelationWithOffset
method in object MoveToPostureActivity
DEPRECATED.
SetPartUpdateStatusLock
method in object MeasureSettingAtt
Locks or unlocks the PartUpdateStatus parameter.
SetPartsParameterModeLock
method in object MultiCADSettingAtt
Locks or unlocks the PartsParameterMode parameter.
SetPasteComponentModeLock
method in object AsmConstraintSettingAtt
Locks or unlocks the component paste setting parameter.
SetPasteSameInstanceLock
method in object TreeTabSettingAtt
Locks or unlocks the 'Paste Same Instance' parameter.
SetPath
method in object SchRoute
Set the defining points of a route.
SetPath
method in object SchGRRRoute
Set the defining points of a route graphic.
SetPath2
method in object SchGRRRoute
Set the defining points of a route graphic.
SetPath3
method in object SchGRRRoute
Set the defining points of a route graphic.
SetPathFinderSmoothLock
method in object FittingSettingAtt
Locks or unlocks the PathFinderSmooth parameter.
SetPattern
method in object ManufacturingOperation
Associate a Machining Pattern to a Manufacturing Operation.
SetPick
method in object VisPropertySet
Sets the state pick mode for the current selection.
SetPickAct
method in object PlaceActivity
SetPickedProducts
method in object PickActivity
SetPickingWindowSizeLock
method in object VisualizationSettingAtt
Locks or unlocks the PickingWindowSize setting parameter.
SetPinSupports
method in object ABQRigidBodyConstraint
Sets the pin point supports for the rigid body.
SetPitch
method in object HybridShapeHelix
Sets the helix pitch.
SetPitch2
method in object HybridShapeHelix
Changes the Helix pitch2 .
SetPlaceAct
method in object PickActivity
SetPlacedProducts
method in object PlaceActivity
SetPlacementAxis
method in object SchCompGroupExt
Set the placement axis for the component group.
SetPlaneAxisAngle
method in object HybridShapeDevelop
Sets the rotation angle.
SetPlaneAxisCoord
method in object HybridShapeDevelop
Sets the translation coordinates.
SetPlaneAxisSwapAxes
method in object HybridShapeDevelop
Sets the inversion axes from their previous definitions.
SetPlaneColor
method in object SectioningSettingAtt
Sets the PlaneColor parameter.
SetPlaneColorLock
method in object SectioningSettingAtt
Locks or unlocks the PlaneColor parameter.
SetPlaneNormalLock
method in object SectioningSettingAtt
Locks or unlocks the PlaneNormal parameter.
SetPlaneOriginLock
method in object SectioningSettingAtt
Locks or unlocks the PlaneOrigin parameter.
SetPlateColor
method in object ColorSTDObjectSettingAtt
SetPlateColor
method in object ColorESSObjectSettingAtt
SetPlateColorLock
method in object ColorSTDObjectSettingAtt
Locks or unlocks the PlateColor parameter.
SetPlateColorLock
method in object ColorESSObjectSettingAtt
Locks or unlocks the PlateColor parameter.
SetPlateMaterialLock
method in object MaterialESSObjectSettingAtt
Locks or unlocks the PlateMaterial parameter.
SetPlateTypesLock
method in object TypeESSObjectSettingAtt
Locks or unlocks the PlateTypes parameter.
SetPoint
method in object ArrangementNode
Sets the location of the current ArrangementNode.
SetPointAfter
method in object HybridShapeSpline
Sets the Point After a given position.
SetPointBefore
method in object HybridShapeSpline
Sets the Point Before a given position.
SetPointConstraintExplicit
method in object HybridShapeSpline
Sets the Constraint of the point at iPos.
SetPointConstraintFromCurve
method in object HybridShapeSpline
Sets the Constraint of the point at iPos.
SetPortionToKeep
method in object HybridShapeTrim
Sets a portion to keep number in Pieces mode.
SetPosAngle
method in object HybridShapeSweepExplicit
Sets angles if both profile and first sweep plane axis systems from default positions.
SetPosAngle
method in object HybridShapePositionTransfo
Sets angles of both initial and target coordinate systems.
SetPosCoord
method in object HybridShapeSweepExplicit
Sets translations coordinates if both profile axis system and first sweep plane axis system from default positions.
SetPosCoord
method in object HybridShapePositionTransfo
Sets translation coordinates of both initial and target coordinate systems.
SetPosDirection
method in object HybridShapeSweepExplicit
Sets the positioning directions : profile plane or first sweep plane X-axis direction.
SetPosPoint
method in object HybridShapeSweepExplicit
Sets the points designated as the origins of the profile plane and first sweep plane.
SetPosPoint
method in object HybridShapePositionTransfo
Sets the points designated as the origins of the initial and target planes.
SetPosSwapAxes
method in object HybridShapeSweepExplicit
Sets axes inversion from previous definition for both profile plane and first sweep plane.
SetPosSwapAxes
method in object HybridShapePositionTransfo
Sets axis inversion from previous definitions for both initial and target planes.
SetPosition
method in object Plane
Sets the position where the plane is displayed.
SetPosition
method in object AMPTag
Function to set the position( array of doubles; X, Y, Z, Yaw, Roll, Pitch values ) of the given AMPTag.
SetPosition
method in object Section
Sets the position of the section.
SetPosition
method in object SchGRRComp
Set the current position of the component.
SetPosition
method in object SchRouteSymbol
Set the symbol's position on the route that own it.
SetPosition
method in object SchCntrLocation
Set the current position of the connector in absolute coordinates.
SetPosition
method in object MoveToPostureActivity
Sets the Manikin's position value in the MoveToPosture Activity.
SetPositionDirection
method in object HybridShapePositionTransfo
Sets the positioning directions.
SetPositions
method in object Marker2D
Sets the coordinates of the positions of the Marker2D.
SetPostureValues
method in object MoveToPostureActivity
SetPreSelectionModeLock
method in object VisualizationSettingAtt
Locks or unlocks the PreSelectionMode setting parameter.
SetPrecision
method in object SetOfEquation
Sets the calculation precision.
SetPreselectedElementLinetypeLock
method in object VisualizationSettingAtt
Locks or unlocks the PreselectedElementLinetype setting parameter.
SetPreselectedElementRGB
method in object VisualizationSettingAtt
Sets the PreselectedElementRGB parameter.
SetPreselectedElementRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the PreselectedElementRGB setting parameter.
SetPresentationLock
method in object Export3DXmlSettingAtt
SetPrevAreaLock
method in object DMUTolSettingAtt
Locks or unlocks the Preview Area setting parameter value.
SetPrevProcParseTypeForMfgCtxLock
method in object MfgHubSettingAtt
Locks or unlocks the PrevProcParseTypeForMfgCtx parameter.
SetPreventBackgroundAccessLock
method in object DraftingSettingAtt
Locks or unlocks the PreventBackgroundAccess parameter.
SetPreventDimDriving3DCstrLock
method in object DraftingSettingAtt
Locks or unlocks the PreventDimDriving3DCstr parameter.
SetPreventFileNewLock
method in object DraftingSettingAtt
Locks or unlocks the PreventFileNew parameter.
SetPreventGenViewStyleLock
method in object DraftingSettingAtt
Locks or unlocks the PreventGenViewStyle parameter.
SetPreventSetAsDefaultLock
method in object DraftingSettingAtt
Locks or unlocks the PreventSetAsDefault parameter.
SetPreventSwitchStandardLock
method in object DraftingSettingAtt
Locks or unlocks the PreventSwitchStandard parameter.
SetPreventTrueDimensionCreationLock
method in object DraftingSettingAtt
Locks or unlocks the PreventTrueDimensionCreation parameter.
SetPreventUpdateStandardLock
method in object DraftingSettingAtt
Locks or unlocks the PreventUpdateStandard parameter.
SetPreventViewGeomUpgradeLock
method in object DraftingSettingAtt
Locks or unlocks the PreventViewGeomUpgrade parameter.
SetPreviousOrientation
method in object HybridShapeTrim
Sets the orientation used to compute the feature, referring to the previous trimmed element.
SetPrinterDirectoriesLock
method in object PrintersSettingAtt
Locks or unlocks the directories of printer files and their states.
SetPrinterGroupsLock
method in object PrintersSettingAtt
Locks or unlocks the definition of each printer group.
SetPriorityLock
method in object DocumentationSettingAtt
Locks or unlocks the contextual priority parameter.
SetProEInstanceModeLock
method in object MultiCADSettingAtt
Locks or unlocks the ProEInstanceMode parameter.
SetProEInstanceNameLock
method in object MultiCADSettingAtt
Locks or unlocks the ProEInstanceName parameter.
SetProEQuiltsReadLock
method in object MultiCADSettingAtt
Locks or unlocks the ProEQuiltsRead parameter.
SetProESimpRepModeLock
method in object MultiCADSettingAtt
Locks or unlocks the ProESimpRepMode parameter.
SetProESimpRepNameLock
method in object MultiCADSettingAtt
Locks or unlocks the ProESimpRepName parameter.
SetProcProdRelationsLock
method in object MfgHubSettingAtt
Locks or unlocks the ProcProdRelations parameter.
SetProcResRelationsLock
method in object MfgHubSettingAtt
Locks or unlocks the ProcResRelations parameter.
SetProcessID
method in object Activity
SetProcessIDScript
method in object LibTabSettingAtt
SetProcessIDScriptLock
method in object LibTabSettingAtt
Locks or unlocks the "Custom VB Script" parameter.
SetProcessTreeID
method in object MHILoadParameters
SetProductAndReconciliate
method in object ManufacturingSetup
Associate the Product to a Manufacturing Setup and reconciliate links.
SetProductBOMID
method in object MHILoadParameters
SetProductUpdateStatusLock
method in object MeasureSettingAtt
Locks or unlocks the ProductUpdateStatus parameter.
SetProfileElement
method in object SketchBasedShape
Returns or sets a profile element.
SetProjectionPlane
method in object DrawingViewGenerativeBehavior
Sets the drawing view projection plane.
SetPropagateHighlightLock
method in object Layout2DSettingAtt
Locks or unlocks the PropagateHighlight parameter.
SetPropagationType
method in object HybridShapeExtractMulti
Sets the type of propagation for the ExtractMulti in the list of constraints at specified position.
SetProtectedElementsColor
method in object Layout2DSettingAtt
Sets the ProtectedElementsColor parameter.
SetProtectedElementsColorLock
method in object Layout2DSettingAtt
Locks or unlocks the ProtectedElementsColor parameter.
SetPublishAutoLaunchBrowserLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the PublishAutoLaunchBrowser parameter.
SetPublishTopologicalElementsLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "PublishTopologicalElements" parameter.
SetPullingDirection
method in object DraftDomain
Sets the draft pulling direction.
SetQuickConstraintModeLock
method in object AsmConstraintSettingAtt
Locks or unlocks the quick constraint setting parameter.
SetQuickConstraintOrderedList
method in object AsmConstraintSettingAtt
Sets the quick constraint ordered list setting parameter.
SetRCSDataLibDirLock
method in object RRSSettingAtt
Locks or unlocks the "RCSDATA$LIB" parameter.
SetRRS2ConnectDownloadersLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2ConnectDownloaders" parameter.
SetRRS2ConsistencyCmdDownloadersLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2ConsistencyCmdDownloaders" parameter.
SetRRS2ControllerIdentifiersLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2ControllerIdentifiers" parameter.
SetRRS2DeleteAutoDownloadFilesAfterXferLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2DeleteAutoDownloadFilesAfterXfer" parameter.
SetRRS2DfltControllerIdentifierLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2DfltControllerIdentifier" parameter.
SetRRS2DownloadDuringConnectLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2DownloadDuringConnect" parameter.
SetRRS2DownloadDuringSimRunLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2DownloadDuringSimRun" parameter.
SetRRS2DownloadInPartCoordinatesLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2DownloadInPartCoordinates" parameter.
SetRRS2DownloadLogFileNameLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2DownloadLogFileName" parameter.
SetRRS2FreePlaySimStepSizeLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2FreePlaySimStepSize" parameter.
SetRRS2MainTaskProcessingLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2MainTaskProcessing" parameter.
SetRRS2MotionPlannerActiveDuringTeachOLPLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2MotionPlannerActiveDuringTeachOLP" parameter.
SetRRS2SimRunDownloadersLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2SimRunDownloaders" parameter.
SetRRS2StopVRCWhenSimStopsLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2StopVRCWhenSimStops" parameter.
SetRRS2UpdateProgramOnDownloadLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2UpdateProgramOnDownload" parameter.
SetRRS2UseVRCInverseKinematicsLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2UseVRCInverseKinematics" parameter.
SetRRS2UseVRCTurnLimitsLock
method in object RRSSettingAtt
Locks or unlocks the "RRS2UseVRCTurnLimits" parameter.
SetRRSLibDirLock
method in object RRSSettingAtt
Locks or unlocks the "RRS$LIB" parameter.
SetRRSServerFileLock
method in object RRSSettingAtt
Sets value of "RRS Servers File" parameter.
SetRadius
method in object HybridShapeSphere
Sets Radius on the object.
SetRadius
method in object HybridShapePolyline
Sets the radius at specified position of the polyline.
SetRadius
method in object HybridShapeSweepCircle
Sets the radius value useful in some circular sweep types.
SetRadiusOnMacro
method in object ManufacturingOperation
Defines radius attribute on the circular elementary macro motion on CIRCULAR MILLING or THREAD MILLING operations ONLY.
SetRadiusPitchParam
method in object HybridShapeSpiral
Sets Radius pitch parameter.
SetRatingLock
method in object HtsJointSpeedSettingsAtt
Locks or unlocks the Rating parameter.
SetReachColorLock
method in object RobAnalysisSettingAtt
Locks or unlocks the ReachColor parameter.
SetRealColor
method in object VisPropertySet
Sets the real color and the color inheritance flag for the current selection.
SetRealColor
method in object SceneProductData
Returns / Set the scene product's color and inheritance.
SetRealLineType
method in object VisPropertySet
Sets the real line type and the line type inheritance flag for the current selection.
SetRealOpacity
method in object VisPropertySet
Sets the opacity and the opacity inheritance flag for the current selection.
SetRealWidth
method in object VisPropertySet
Sets the real line width and the line width inheritance flag for the current selection.
SetRecordModeLock
method in object ManipSettingAtt
Locks or unlocks the RecordMode parameter.
SetRefDocLock
method in object GeneralSessionSettingAtt
Locks or unlocks the referenced documents parameter.
SetReference
method in object BasicComponent
Sets the reference corresponding to the given component.
SetReference
method in object AnalysisEntity
Sets the reference corresponding to the given component.
SetReference
method in object AnalysisLocalEntity
Sets the reference corresponding to the given component.
SetReferenceBasePosition
method in object CalibOffsets
Set reference base position of robot.
SetReferenceDirection
method in object HybridShapeWrapCurve
Sets the reference direction projection to the wrap curve feature.
SetReferenceDirectoryForTypesLock
method in object LanguageSheetSettingAtt
Locks or unlocks the ReferenceDirectoryForTypes setting parameter.
SetReferencePoint
method in object HybridShapePlaneEquation
Sets the reference point.
SetReferenceSpine
method in object HybridShapeWrapCurve
Sets the reference spine to the wrap curve feature.
SetRelatedColors
method in object DMUTolSettingAtt
Sets the Related Surface Color setting parameter value.
SetRelatedColorsLock
method in object DMUTolSettingAtt
Locks or unlocks the Related Surface Color setting parameter value.
SetRelationsNodeInTreeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "RelationsNodeInTree" parameter.
SetRelationsUpdateInPartContextEvaluateDuringUpdateLock
method in object KnowledgeSheetSettingAtt
Locks or unlocks the RelationsUpdateInPartContextEvaluateDuringUpdate parameter.
SetRelationsUpdateInPartContextSynchronousRelationsLock
method in object KnowledgeSheetSettingAtt
Locks or unlocks the RelationsUpdateInPartContextSynchronousRelations parameter.
SetRelativePosition
method in object SchCntrLocation
Set the current position of the connector in absolute coordinates.
SetRelay
method in object Publications
Valuates a publication object with another publication object.
SetReleasePathLock
method in object CacheSettingAtt
Locks or unlocks the cache local path parameter.
SetReleasedVoxelLock
method in object CacheSettingAtt
Locks or unlocks the released voxel parameter.
SetRelimiters
method in object HybridShapeSweepLine
Sets the elements relimiting the spine (or the default spine).
SetRelimiters
method in object HybridShapeSweepConic
Sets the elements relimiting the spine (or the default spine).
SetRelimiters
method in object HybridShapeSweepCircle
Sets the elements relimiting the spine (or the default spine).
SetRelimiters
method in object HybridShapeSweepExplicit
Sets the elements relimiting the spine (or the default spine).
SetRelimitingGeometry
method in object ManufacturingOperation
Defines start / end element on PROFILE CONTOURING operation ONLY.
SetRenameFile
method in object SendToService
Renames one file to be copied.
SetRenderStyleLock
method in object TreeTabSettingAtt
Locks or unlocks the "Render Style" parameter.
SetRepModLock
method in object IgesSettingAtt
Locks or unlocks the Export representation mode setting parameter.
SetReplaceOnlyAfterCurrentLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "ReplaceOnlyAfterCurrent" parameter.
SetReportCheckAdvisorLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the ReportCheckAdvisor parameter.
SetReportCheckExpertLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the ReportCheckExpert parameter.
SetReportHtmlInCatiaSessionLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the ReportHtmlInCatiaSession parameter.
SetReportObjectsInformationLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the ReportObjectsInformation parameter.
SetReportOutputDirectoryLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the ReportOutputDirectory parameter.
SetReportParametersInformationLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the ReportParametersInformation parameter.
SetReportPassedObjectsLock
method in object ReportGenerationSheetSettingAtt
Locks or unlocks the ReportPassedObjects parameter.
SetReshapeMode
method in object SchGRRRoute2
Set the reshape mode.
SetResolvedSectionsPathLock
method in object PathESSRessourcesSettingAtt
Locks or unlocks the ResolvedSectionsPath parameter.
SetResourceFilterLock
method in object TreeTabSettingAtt
Locks or unlocks the 'Resource Folder' parameter.
SetResourceTreeID
method in object MHILoadParameters
SetResultOutputDirLock
method in object FASReportingSettingAtt
Locks or unlocks the "OLP Robot Program Directory" parameter.
SetRevolutionNumber
method in object HybridShapeHelix
Changes the Revolution Numbers.
SetRmvNotAssgnPrdResOnSyncLock
method in object MfgHubSettingAtt
Locks or unlocks the RmvNotAssgnPrdResOnSync parameter.
SetRobotProgramDirLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP Directory setting parameter.
SetRootDLNameCreationRightLock
method in object DLNameSettingAtt
Locks or unlocks the parameter RootDLNameCreationRight.
SetRotAccelColorLock
method in object RobAnalysisSettingAtt
Locks or unlocks the RotAccelColor parameter.
SetRotAccelLimitLock
method in object RobAnalysisSettingAtt
Locks or unlocks the RotAccelLimit parameter.
SetRotSpeedColorLock
method in object RobAnalysisSettingAtt
Locks or unlocks the RotSpeedColor parameter.
SetRotSpeedLimitLock
method in object RobAnalysisSettingAtt
Locks or unlocks the RotSpeedLimit parameter.
SetRotationAngle
method in object SchGRRComp
Set the current rotation angle (from x-axis in radian) of the component.
SetRotationAxis
method in object CircPattern
Sets the rotation axis.
SetRotationCenter
method in object CircPattern
Sets the rotation center.
SetRotationSnapAngleLock
method in object FTASettingAtt
Locks or unlocks the Rotation Snap Angle parameter.
SetRotationSnapAutoLock
method in object FTASettingAtt
Locks or unlocks the Rotation Snap Auto parameter.
SetRotationSphereModeLock
method in object VisualizationSettingAtt
Locks or unlocks the RotationSphereMode setting parameter.
SetRowSize
method in object DrawingTable
Sets the height of a row of a drawing table.
SetRuledDevelopableSurfaceConnection
method in object HybridShapeBlend
SetRunAnnotBehaviorLock
method in object SimulationSettingAtt
Locks or unlocks the RunAnnotBehavior parameter.
SetRunAnnotationLock
method in object SimulationSettingAtt
Locks or unlocks the RunAnnotation parameter.
SetRunEndConditionLock
method in object SimulationSettingAtt
Locks or unlocks the RunEndCondition parameter.
SetRunHlnkBehaviorLock
method in object SimulationSettingAtt
Locks or unlocks the RunHlnkBehavior parameter.
SetRunHyperlinkLock
method in object SimulationSettingAtt
Locks or unlocks the RunHyperlink parameter.
SetRunPauseLock
method in object SimulationSettingAtt
Locks or unlocks the RunPause parameter.
SetRunStateMgtLock
method in object SimulationSettingAtt
Locks or unlocks the RunStateMgt parameter.
SetRunStepSizeLock
method in object SimulationSettingAtt
Locks or unlocks the RunStepSize parameter.
SetRunTextBehaviorLock
method in object SimulationSettingAtt
Locks or unlocks the RunTextBehavior parameter.
SetRunTextMsgLock
method in object SimulationSettingAtt
Locks or unlocks the RunTextMsg parameter.
SetRunViewpointLock
method in object SimulationSettingAtt
Locks or unlocks the RunViewpoint parameter.
SetRunVisBehaviorLock
method in object SimulationSettingAtt
Locks or unlocks the RunVisBehavior parameter.
SetSHMStdProfPathLock
method in object CatalogSHMObjectSettingAtt
Locks or unlocks the SHMStdProfPath setting parameter.
SetSHMViewFDBeadBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDBeadBTLFeat setting parameter.
SetSHMViewFDCircStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDCircStampBTLFeat setting parameter.
SetSHMViewFDCurveStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDCurveStampBTLFeat setting parameter.
SetSHMViewFDFlgCutBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDFlgCutBTLFeat setting parameter.
SetSHMViewFDFlgCutIMLLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDFlgCutIML setting parameter.
SetSHMViewFDFlgCutOMLLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDFlgCutOML setting parameter.
SetSHMViewFDFlgHoleBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDFlgHoleBTLFeat setting parameter.
SetSHMViewFDFlgHoleIMLLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDFlgHoleIML setting parameter.
SetSHMViewFDFlgHoleOMLLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDFlgHoleOML setting parameter.
SetSHMViewFDOtherStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDOtherStampBTLFeat setting parameter.
SetSHMViewFDStiffStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDStiffStampBTLFeat setting parameter.
SetSHMViewFDSurfFlgBTLFeatBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfFlgBTLFeatBF setting parameter.
SetSHMViewFDSurfFlgBTLFeatHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfFlgBTLFeatHF setting parameter.
SetSHMViewFDSurfFlgBTLSuppBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfFlgBTLSuppBF setting parameter.
SetSHMViewFDSurfFlgBTLSuppHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfFlgBTLSuppHF setting parameter.
SetSHMViewFDSurfFlgIMLBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfFlgIMLBF setting parameter.
SetSHMViewFDSurfFlgIMLHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfFlgIMLHF setting parameter.
SetSHMViewFDSurfFlgOMLBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfFlgOMLBF setting parameter.
SetSHMViewFDSurfFlgOMLHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfFlgOMLHF setting parameter.
SetSHMViewFDSurfStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDSurfStampBTLFeat setting parameter.
SetSHMViewFDUserStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFDUserStampBTLFeat setting parameter.
SetSHMViewFPBeadBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPBeadBTLFeat setting parameter.
SetSHMViewFPCircStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPCircStampBTLFeat setting parameter.
SetSHMViewFPCurveStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPCurveStampBTLFeat setting parameter.
SetSHMViewFPFlgCutBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPFlgCutBTLFeat setting parameter.
SetSHMViewFPFlgCutIMLLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPFlgCutIML setting parameter.
SetSHMViewFPFlgCutOMLLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPFlgCutOML setting parameter.
SetSHMViewFPFlgHoleBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPFlgHoleBTLFeat setting parameter.
SetSHMViewFPFlgHoleIMLLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPFlgHoleIML setting parameter.
SetSHMViewFPFlgHoleOMLLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPFlgHoleOML setting parameter.
SetSHMViewFPOtherStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPOtherStampBTLFeat setting parameter.
SetSHMViewFPStiffStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPStiffStampBTLFeat setting parameter.
SetSHMViewFPSurfFlgBTLFeatBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgBTLFeatBF setting parameter.
SetSHMViewFPSurfFlgBTLFeatHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgBTLFeatHF setting parameter.
SetSHMViewFPSurfFlgBTLSuppBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgBTLSuppBF setting parameter.
SetSHMViewFPSurfFlgBTLSuppHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgBTLSuppHF setting parameter.
SetSHMViewFPSurfFlgCLBBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgCLBBF setting parameter.
SetSHMViewFPSurfFlgCLBHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgCLBHF setting parameter.
SetSHMViewFPSurfFlgIMLBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgIMLBF setting parameter.
SetSHMViewFPSurfFlgIMLHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgIMLHF setting parameter.
SetSHMViewFPSurfFlgOML2BFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgOML2BF setting parameter.
SetSHMViewFPSurfFlgOML2HFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgOML2HF setting parameter.
SetSHMViewFPSurfFlgOMLBFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgOMLBF setting parameter.
SetSHMViewFPSurfFlgOMLHFLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfFlgOMLHF setting parameter.
SetSHMViewFPSurfStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPSurfStampBTLFeat setting parameter.
SetSHMViewFPUserStampBTLFeatLock
method in object ViewCharacteristicCurvesSettingAtt
Locks or unlocks the SHMViewFPUserStampBTLFeat setting parameter.
SetSVGViewerLock
method in object FASReportingSettingAtt
Locks or unlocks the "OLP Robot Program Directory" parameter.
SetSafetyPlane
method in object ManufacturingSetup
Associates a Safety Plane to a Manufacturing Setup.
SetSameDisplayLock
method in object UnitsSheetSettingAtt
SetSaveAsNewTemplateDirectoryLock
method in object AnalysisPostProSettingAtt
Locks or unlocks the SaveAsNewTemplateDirectory parameter.
SetSaveAutoIncrementLock
method in object RenderingSettingAtt
Locks or unlocks the SaveAutoIncrement parameter.
SetSaveCGRLock
method in object DMUTolSettingAtt
Locks or unlocks the Save in CGR setting parameter value.
SetSaveControlFlowInPROModeLock
method in object MfgHubSettingAtt
Locks or unlocks the SaveControlFlowInPROMode parameter.
SetSaveCoorsysInCgrLock
method in object MultiCADSettingAtt
Locks or unlocks the SaveCoorsysInCgr parameter.
SetSaveInCGRLock
method in object FTAInfraSettingAtt
Locks or unlocks the Save In CGR setting parameter value.
SetSavePPRNoDetailingLock
method in object MfgHubSettingAtt
Locks or unlocks the SavePPRNoDetailing parameter.
SetSaveRelationToUnExposedPartLock
method in object MfgHubSettingAtt
Locks or unlocks the SaveRelationToUnExposedPart parameter.
SetSaveShowEffctvtPanelLock
method in object MfgHubSettingAtt
Locks or unlocks the SaveShowEffctvtPanel parameter.
SetSaveV5CalcTimeLock
method in object MfgHubSettingAtt
Locks or unlocks the SaveV5CalcTime parameter.
SetScale
method in object SchGRRComp
Set the current scale factor of the component.
SetSceneDefaultsColor
method in object N4DNavigatorSettingAtt
SetSceneDefaultsColorLock
method in object N4DNavigatorSettingAtt
Locks or unlocks the SceneDefaultsColor parameter.
SetScoredElement
method in object DrawingDimValue
Set dimension scored element.
SetSecondAngleLaw
method in object HybridShapeSweepCircle
Sets the second angle law useful in some circular sweep types.
SetSecondDirection
method in object RectPattern
Sets the second repartition direction.
SetSecondDirection
method in object HybridShapeCircleCtrRad
Sets the second direction on the plane to compute the point (for stability).
SetSecondDirection
method in object HybridShapePointOnPlane
Sets the second direction on the plane to compute the point (for stability).
SetSecondLengthDefinitionType
method in object HybridShapeSweepLine
Sets the second length definition type.
SetSecondLengthLaw
method in object HybridShapeSweepLine
Sets the second length law useful in some linear sweep types.
SetSecondaryFormat
method in object AssemblyConvertor
Defines the secondary properties that will be used in the print method.
SetSectPatternLock
method in object FTASettingAtt
Locks or unlocks the Pattern of Visu setting parameter value.
SetSectPatternLock
method in object DMUTolSettingAtt
Locks or unlocks the Pattern of Visu setting parameter value.
SetSectionFillLock
method in object SectioningSettingAtt
Locks or unlocks the SectionFill parameter.
SetSectionLock
method in object Export3DXmlSettingAtt
SetSectionsCatalogPathLock
method in object PathESSRessourcesSettingAtt
Locks or unlocks the SectionsCatalogPath parameter.
SetSeedPoint
method in object SchGRRRouteEllipse
Set the seed point of the route graphic ellipse.
SetSegmentValues
method in object MoveToPostureActivity
SetSelectPublishedGeometryLock
method in object FTASettingAtt
Locks or unlocks the Select Published Geometry parameter.
SetSelectedEdgeRGB
method in object VisualizationSettingAtt
Sets the SelectedEdgeRGB parameter.
SetSelectedEdgeRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the SelectedEdgeRGB setting parameter.
SetSelectedElementRGB
method in object VisualizationSettingAtt
Sets the SelectedElementRGB parameter.
SetSelectedElementRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the SelectedElementRGB setting parameter.
SetSelectedObjectID
method in object MHILoadParameters
Sets the "ergocompbase" ID (oid) of selected object (object use to start the load).
SetSelection
method in object AnalysisImage
Adds a selection to an image.
SetServerTimeOutLock
method in object LicenseSettingAtt
Locks or unlocks the TimeOut setting parameter.
SetShaderModeLock
method in object VisualizationSettingAtt
Locks or unlocks the ShaderMode setting parameter.
SetShapeColor
method in object ColorSTDObjectSettingAtt
SetShapeColorLock
method in object ColorSTDObjectSettingAtt
Locks or unlocks the ShapeColor parameter.
SetSharpnessAngle
method in object HybridShapeHealing
Sets the Sharpness Angle for healing entity.
SetShiftedProfileLock
method in object FTASettingAtt
Locks or unlocks the Shifted Profile parameter.
SetShow
method in object VisPropertySet
Sets the state show mode for the current selection.
SetShowActivationLock
method in object TreeVizManipSettingAtt
Locks or unlocks the visualization Show/NoShow's mode applied to the specification tree.
SetShowCompletionDialogBoxLock
method in object IgesSettingAtt
Locks or unlocks the Show/No Show dialog box setting parameter.
SetShowLicenseLock
method in object LicenseSettingAtt
Locks or unlocks the ShowLicense setting parameter.
SetShowOnlyFilteredObjectsLock
method in object MfgHubSettingAtt
Locks or unlocks the ShowOnlyFilteredObjects parameter.
SetShowParametersLock
method in object FunctionalSystemSettingAtt
Locks or unlocks the ShowParameters parameter.
SetShowRelationsLock
method in object FunctionalSystemSettingAtt
Locks or unlocks the ShowRelations parameter.
SetShowSynchroStatusOfLocalParamCacheLock
method in object FunctionalSystemSettingAtt
Locks or unlocks the ShowSynchroStatusOfLocalParamCache parameter.
SetSideStepAngleLock
method in object HtsGeneralSettingAtt
Locks or unlocks the SideStepAngle parameter.
SetSilhouette
method in object SweptVolumes
SetSimplify
method in object HybridShapeAssemble
Set the simplify flag.
SetSingularColorLock
method in object RobAnalysisSettingAtt
Locks or unlocks the SingularColor parameter.
SetSizeControlLock
method in object CacheSettingAtt
Locks or unlocks the cache size control parameter.
SetSizeTypeLock
method in object TreeVizManipSettingAtt
Locks or unlocks the type of size applied to the text of the specification tree.
SetSmoothAngleThreshold
method in object HybridShapeBlend
Sets the angular threshold.
SetSmoothAngleThreshold
method in object HybridShapeSweepLine
Sets the angular threshold.
SetSmoothAngleThreshold
method in object HybridShapeSweepConic
Sets angular threshold under which discontinuities.
SetSmoothAngleThreshold
method in object HybridShapeSweepCircle
Sets the angular threshold.
SetSmoothAngleThreshold
method in object HybridShapeSweepExplicit
Sets angular threshold.
SetSmoothDeviation
method in object HybridShapeBlend
Sets the deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
SetSnapAngleDistanceLock
method in object ManipSettingAtt
Locks or unlocks the SnapAngleDistance parameter.
SetSnapPositionLock
method in object ManipSettingAtt
Locks or unlocks the SnapPosition parameter.
SetSolidMULock
method in object V4V5SpaceSettingAtt
Locks or unlocks the Solid Mock-Up Migration Mode setting parameter.
SetSpacingCode
method in object SchFrameInfo
Set the frame spacing code.
SetSpatialSplit
method in object SweptVolumes
Adds the possibility to parallelize swept&wrapping after a spatial split.
SetSpecificationFromPublication
method in object AnalysisMeshPart
Adds the geometric value corresponding to the given global specification.
SetSpecificationFromReference
method in object AnalysisMeshPart
Set the geometric value corresponding to the given global specification.
SetSpeedValue
method in object GenericMotionProfile
Set speed value of the Profile.
SetSpindleMagnitude
method in object ManufacturingOperation
Defines the magnitude of the spindle values.
SetSpine
method in object HybridShapeLoft
Sets the spine to the lofted surface.
SetSplineType
method in object HybridShapeSpline
Sets the spline type.
SetSplitFunctionalObjectNameLock
method in object FunctionalSystemSettingAtt
Locks or unlocks the SplitFunctionalObjectName parameter.
SetStandardLock
method in object FTAInfraSettingAtt
Locks or unlocks the Tolerancing Standard setting parameter value.
SetStartAndEndTangentsPlusConicParameter
method in object HybridShapeConic
Sets the tangent directions at conic start and end points, and the conic parameter.
SetStartAndEndTangentsPlusPassingPoint
method in object HybridShapeConic
Sets the tangent directions at conic start and end points, and a passing point.
SetStartFaceForClosing
method in object HybridShapeLoft
Sets a face to the start section from the lofted surface.
SetStartParam
method in object HybridShapeIntegratedLaw
Sets start parameter.
SetStartPoint
method in object HybridShapeSpine
Sets the start point of the spine curve.
SetStartPoint
method in object SchGRRRoute
Set the start point of the route graphic.
SetStartPointGeometry
method in object ManufacturingOperation
Defines the geometry and the offset of a start point on POCKETING operation ONLY.
SetStartSectionTangent
method in object HybridShapeLoft
Sets a tangent surface to the start section from the lofted surface.
SetStartTangentDirectionFlag
method in object HybridShapeConic
Sets the tangent direction orientation at the conic start point.
SetStartUp_Model_For_DrawingLock
method in object MigrBatchSettingAtt
Locks or unlocks the "Initial Drawing Path" setting parameter.
SetStartingAngle
method in object HybridShapeHelix
Sets the helix starting angle.
SetStaticCullLock
method in object VisualizationSettingAtt
Locks or unlocks the StaticCull setting parameter.
SetStaticLODLock
method in object VisualizationSettingAtt
Locks or unlocks the StaticLOD setting parameter.
SetStatus
method in object SchInternalFlow
Set insertion flow status.
SetStepByStepUpdateAndRerouteLock
method in object SpecV4SettingAtt
Locks or unlocks the StepByStepUpdateAndReroute setting parameter.
SetStereoModeLock
method in object VisualizationSettingAtt
Locks or unlocks the StereoMode setting parameter.
SetStock
method in object ManufacturingSetup
Associates a stock to a Manufacturing Setup.
SetStringAttribute
method in object E5Property
SetStringUsedAsCarriageReturnLock
method in object FunctionalSystemSettingAtt
Locks or unlocks the StringUsedAsCarriageReturn parameter.
SetStringUserAttribute
method in object Fastener
et the value of user attribute whoes name matches the input string.
SetStyleSheetDirLock
method in object FASReportingSettingAtt
Locks or unlocks the "OLP Robot Program Directory" parameter.
SetStyleSheetPathLock
method in object WorkGeneralSettingAtt
Locks or unlocks the StyleSheetPath parameter.
SetSupport
method in object HybridShapeBlend
Sets a support to the blend.
SetSupport
method in object HybridShapeSpline
Sets the spline support surface.
SetSupport
method in object HybridShapeExtractMulti
Sets the support of the list of constraints at specified position.
SetSupports
method in object ABQMassScaling
Sets the supports that define the mass scaling region(s).
SetSupports
method in object ABQRigidCoupling
Sets the support regions for the coupling.
SetSupports
method in object ABQSmoothCoupling
Sets the support regions for the coupling.
SetSuppressMode
method in object HybridShapeAssemble
Set the SuppressMode flag.
SetSurfaceAccuracyLock
method in object Export3DXmlSettingAtt
Locks or unlocks the flag.
SetSurfaceElementsLocationLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "SurfaceElementsLocation" parameter.
SetSymbColor
method in object DrawingDimLine
Set symbol color of dimension line.
SetSymbThickness
method in object DrawingDimLine
Set symbol thickness of dimension line.
SetSymbType
method in object DrawingDimLine
Set symbol type of dimension line.
SetSymbol
method in object DrawingWelding
Sets the symbol of the drawing welding.
SetSymbol
method in object SchGRRCntr
Set the symbol or graphics used to represent a connector.
SetSymbolType
method in object VisPropertySet
Sets the symbol type.
SetSymmetricalExtension
method in object HybridShapeLinePtPt
Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension
method in object HybridShapeLinePtDir
Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension
method in object HybridShapeLineAngle
Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension
method in object HybridShapeLineNormal
Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension
method in object HybridShapeLineTangency
Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension
method in object HybridShapeLineBisecting
Sets the symmetrical extension of the line (start = -end).
SetSyncAnlSpecsLock
method in object AnalysisSettingAtt
Locks or unlocks the SyncAnlSpecs parameter.
SetSyncTimeAndSpeedInSimulationLock
method in object HtsGeneralSettingAtt
Locks or unlocks the SyncTimeAndSpeed parameter.
SetTCPOffset
method in object GenericToolProfile
Set the underlying x,y,z, roll, pitch, yaw of the tool TCP offset.
SetTCPTraceMode
method in object TCPTraceActivity
Set the tracing capability as active or not.
SetTagTarget
method in object RobotMotion
Sets the Robot Tag target.
SetTangency
method in object HybridShapeSweepConic
Sets tangency surface or curve and its angle given the guide curve index.
SetTangencyAngle
method in object HybridShapeHealing
Sets the distance objective for healing entity.
SetTangencyAngleLawInversion
method in object HybridShapeSweepConic
Sets information whether tangency angle law has to be inverted or not for a specified guide curve.
SetTangencyChoiceNo
method in object HybridShapeSweepCircle
Sets a sequence which identifies a solutionamong all possibilities of a circular profile sweep tangent to a surface.
SetTangencyContinuity
method in object HybridShapeAssemble
Set the tangency continuity checker flag.
SetTangencyLaw
method in object HybridShapeSweepConic
Sets tangency surface or curve and its angle given the guide curve index.
SetTangencyObjective
method in object HybridShapeHealing
Sets the tangency objective for healing entity.
SetTangencyThreshold
method in object HybridShapeCurveSmooth
Sets the tangency threshold.
SetTangent
method in object ControlPoint2D
SetTangentIntersectPointPlusConicParm
method in object HybridShapeConic
Sets the intersection point of the conic tangents to the start and end points, and the conic parameter.
SetTangentIntersectPointPlusPassingPoint
method in object HybridShapeConic
Sets the intersection point of the conic tangents to the start and end points, and a passing point.
SetTaperAngle
method in object HybridShapeHelix
Sets the helix taper angle.
SetTargetLine
method in object SWKIKConstraint
Set the target line to follow.
SetTargetPlane
method in object SWKIKConstraint
Set the target plane to follow.
SetTargetPoint
method in object SWKIKConstraint
Set the target point to follow.
SetTechnicalDocumentationPathLock
method in object DocumentationSettingAtt
Locks or unlocks the technical documentation location parameter.
SetTechnologicalDatas
method in object Shot
Sets all the data associated to the part.
SetTempOutputDirectoryLock
method in object AnalysisReportingSettingAtt
Locks or unlocks the TempOutputDirectory parameter.
SetTensionInDouble
method in object HybridShapeBlend
Sets the tension values to a limit of the blend.
SetTensionType
method in object HybridShapeBlend
Sets the tension type of a limit of the blend.
SetTerminationAttrListLock
method in object PlugMapViewSettingAtt
Locks or unlocks the TerminationAttrList parameter.
SetTextColor
method in object MeasureSettingAtt
Sets the TextColor parameter .
SetTextColorLock
method in object MeasureSettingAtt
Locks or unlocks the TextColor parameter.
SetTextIDVisibility
method in object Fastener
ets the Hide/Show status of the text ID of the fastener in the 3D window Valid Param : 1,0 Example: //to make the fastener id visible in 3D MyFastener.
SetTextMigrationLock
method in object V4V5SpaceSettingAtt
Locks or unlocks the 3D Text Migration setting parameter.
SetTextPositions
method in object Marker3D
Sets the coordinates of the positions of a text marker 3D.
SetThematicsParameterLock
method in object GlobalStatisticsSettingAtt
Locks or unlocks the global statistics parameters.
SetThematicsParameterLock
method in object GeneralStatisticsSettingAtt
Locks or unlocks the general statistics parameters.
SetThickness
method in object TCPTrace
Set the TCP trace component (DNBTCPTraceReps) thickness(for line, axis).
SetThicknessListPathLock
method in object PathESSRessourcesSettingAtt
Locks or unlocks the ThicknessListPath parameter.
SetThreeIntermediatePassingPoints
method in object HybridShapeConic
Sets three conic intermediate passing points.
SetTieSupports
method in object ABQRigidBodyConstraint
Sets the tie point supports for the rigid body.
SetTildeDisplayLock
method in object MeasureSettingAtt
Locks or unlocks the TildeDisplay parameter.
SetTimestampModeLock
method in object CacheSettingAtt
Locks or unlocks the timestamp control in cache.
SetTolJoinLock
method in object IgesSettingAtt
Locks or unlocks the join tolerance setting parameter.
SetTolOptInvalidGeomLock
method in object IgesSettingAtt
Locks or unlocks the InvalidGeom Tolerance setting parameter.
SetToleranceLock
method in object IgesSettingAtt
Locks or unlocks the Tolerance ( optimize - fitting ) setting parameter.
SetTolerances
method in object DrawingDimension
Set tolerance infomation of dimension value.
SetTool
method in object ManufacturingOperation
Assign an already created tool to a Manufacturing Operation.
SetToolAxis
method in object ManufacturingActivity
Defines the ToolAxis coordinates of a Manufacturing Activity.
SetToolChangePoint
method in object ManufacturingSetup
Initialise the ToolChange point of the machine linked to a Manufacturing Setup.
SetToolChangePointByName
method in object ManufacturingSetup
Initialise the ToolChange point of the machine linked to a Manufacturing Setup.
SetToolMobility
method in object GenericToolProfile
Set tool mobility.
SetToolProfile
method in object RobotMotion
Sets the Tool profile.
SetTraceAxisColorLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceAxisColor parameter.
SetTraceAxisThickLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceAxisThick parameter.
SetTraceAxisTypeLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceAxisType parameter.
SetTraceAxisVisuLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceAxisVisu parameter.
SetTraceDeletePathLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceDeletePath parameter.
SetTraceLegendLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceLegend parameter.
SetTraceLineColorLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceLineColor parameter.
SetTraceLineThickLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceLineThick parameter.
SetTraceLineTypeLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceLineType parameter.
SetTraceLineVisuLock
method in object SimTraceSettingAtt
Locks or unlocks the TraceLineVisu parameter.
SetTraceNextColor
method in object TCPTraceManagerGraphics
Set the TCP trace component (DNBTCPTraceReps) color for new points.
SetTracePointColorLock
method in object SimTraceSettingAtt
Locks or unlocks the TracePointColor parameter.
SetTracePointSymbolLock
method in object SimTraceSettingAtt
Locks or unlocks the TracePointSymbol parameter.
SetTracePointVisuLock
method in object SimTraceSettingAtt
Locks or unlocks the TracePointVisu parameter.
SetTrackAutoUpdateLock
method in object FittingSettingAtt
Locks or unlocks the TrackAutoUpdate parameter.
SetTransformation2D
method in object SchGRRComp
Set the local coordinate reference frame (with respect to absolute coordinate system) of the component.
SetTransition
method in object HybridShapeBlend
Sets the transition orientation to a limit of the blend.
SetTranslatorModeLock
method in object MultiCADSettingAtt
Locks or unlocks the Translator mode parameter.
SetTransparencyModeLock
method in object VisualizationSettingAtt
Locks or unlocks the TransparencyMode setting parameter.
SetTravelColorLock
method in object DevAnalysisSettingAtt
Locks or unlocks the TravelColor parameter.
SetTravelLimitLock
method in object DevAnalysisSettingAtt
Locks or unlocks the TravelLimit parameter.
SetTrimSupport
method in object HybridShapeBlend
Sets whether a support of the blend is to be trimmed off.
SetTrueDimensionColor
method in object FTASettingAtt
Sets the TrueDimensionColor parameter.
SetTrueDimensionColorLock
method in object FTASettingAtt
Locks or unlocks the TrueDimensionColor parameter.
SetTrueDimensionLock
method in object FTASettingAtt
Locks or unlocks the TrueDimension parameter.
SetTurnNumbers
method in object RobotMotion
Sets Turn Numbers or Turn signs for the robot motion.
SetTwoIntermediatePassingPointsPlusOneTangent
method in object HybridShapeConic
Sets two conic intermediate passing points and a tangent at one of the passing points.
SetTwoSideLightingModeLock
method in object VisualizationSettingAtt
Locks or unlocks the TwoSideLightingMode setting parameter.
SetType
method in object ThreeDCuts
Sets the type of cut we're doing.
SetType
method in object AMPTag
Function to set the type of the given AMPTag.
SetType
method in object TCPTrace
Set the TCP trace component (DNBTCPTraceReps) type.
SetType
method in object Tag
Sets Frame Type of the Tag by Name.
SetTypeBaseFrmLock
method in object ImportD5SettingAtt
Locks or unlocks the TypeBaseFrm parameter.
SetTypeCoorsysLock
method in object ImportD5SettingAtt
Locks or unlocks the TypeCoorsys parameter.
SetTypeLock
method in object TreeVizManipSettingAtt
Locks or unlocks the type of the specification tree.
SetTypeOfIconOnFunctionalElementLock
method in object FunctionalSystemSettingAtt
Locks or unlocks the TypeOfIconOnFunctionalElement parameter.
SetTypeToolFrmLock
method in object ImportD5SettingAtt
Locks or unlocks the TypeToolFrm parameter.
SetTypeWclPathLock
method in object ImportD5SettingAtt
Locks or unlocks the TypeWclPath parameter.
SetUGActiveLayersOnlyLock
method in object MultiCADSettingAtt
Locks or unlocks the UGActiveLayersOnly parameter.
SetUGDrawingNameLock
method in object MultiCADSettingAtt
Locks or unlocks the UGDrawingName parameter.
SetUGLayerNumbersLock
method in object MultiCADSettingAtt
Locks or unlocks the UGLayerNumbers parameter.
SetUGOpenSurfacesLock
method in object MultiCADSettingAtt
Locks or unlocks the UGOpenSurfaces parameter.
SetUIStyleLock
method in object GeneralSessionSettingAtt
Locks or unlocks the user interface style parameter.
SetUTCTimeFormatLock
method in object CacheSettingAtt
Locks or unlocks the timestamp format.
SetUgReferenceSetLock
method in object MultiCADSettingAtt
Locks or unlocks the UgReferenceSet parameter.
SetUnderFeatureLock
method in object FTAInfraSettingAtt
Locks or unlocks the Under Geometric Feature Nodes setting parameter value.
SetUnderIntensifiedRGB
method in object VisualizationSettingAtt
Sets the UnderIntensifiedRGB parameter.
SetUnderIntensifiedRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the UnderIntensifiedRGB setting parameter.
SetUnderSetLock
method in object FTAInfraSettingAtt
Locks or unlocks the Under Annotation Set Node setting parameter value.
SetUnderViewLock
method in object FTAInfraSettingAtt
Locks or unlocks the Under View/Annotation Plane Nodes setting parameter value.
SetUnequalInstanceNumber
method in object CircPattern
Sets the Instance Number.
SetUnequalInstanceNumber
method in object RectPattern
Sets the Instance Number.
SetUnequalStep
method in object CircPattern
This method is deprecated Sets the UnequalStep.
SetUpdateAnalysisInSimulationLock
method in object HtsGeneralSettingAtt
Locks or unlocks the UpdateAnalysisInSimulation parameter.
SetUpdateElementsRefreshedLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "UpdateElementsRefreshed" parameter.
SetUpdateLinkedExternalReferencesLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "UpdateLinkedExternalReferences" parameter.
SetUpdateModeLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "UpdateMode" parameter.
SetUpdateNeededRGB
method in object VisualizationSettingAtt
Sets the UpdateNeededRGB parameter.
SetUpdateNeededRGBLock
method in object VisualizationSettingAtt
Locks or unlocks the UpdateNeededRGB setting parameter.
SetUpdateResultLock
method in object SectioningSettingAtt
Locks or unlocks the UpdateResult parameter.
SetUpdateStatusModeLock
method in object AsmGeneralSettingAtt
Locks or unlocks the update status computation setting parameter.
SetUpdateStoppedOnErrorLock
method in object PartInfrastructureSettingAtt
Locks or unlocks the "UpdateStoppedOnError" parameter.
SetUploaderDirLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP Parser Directory setting parameter.
SetUploaderLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP Parser setting parameter.
SetUsageLimitLock
method in object MemoryWarningSettingAtt
Locks or unlocks the the alert percentage.
SetUseOnly
method in object ExpertRuleBaseComponentRuntime
Prevents any access to the component for reading or deleting.
SetUseStyleCreateObjectsLock
method in object DraftingSettingAtt
Locks or unlocks the UseStyleCreateObjects parameter.
SetUserProfilesList
method in object OperationProfile
Sets User Profiles List for the Operation.
SetUserVariableExpr
method in object DeviceJointRelations
SetUserWalkSpeedStatusLock
method in object HtsGeneralSettingAtt
Locks or unlocks the UserWalkSpeedStatus parameter.
SetV4V5_FDTLock
method in object CGRAdhesionSettingAtt
Locks or unlocks the V4V5_FDT container activation state.
SetV4_Model_CommentPageLock
method in object CGRAdhesionSettingAtt
Retrieves information about the V4_Model_CommentPage container activation state.
SetV4_Model_LnFLock
method in object CGRAdhesionSettingAtt
Locks or unlocks the V4_Model_LnF container activation state.
SetV4_Part_DefinitionLock
method in object MigrBatchSettingAtt
Locks or unlocks the "V4 Part Definition" setting parameter.
SetV5_SPALock
method in object CGRAdhesionSettingAtt
Locks or unlocks the V5_SPA container activation state.
SetValue
method in object BasicComponent
Set the value corresponding to the given coordinates.
SetValue
method in object AnalysisEntity
Sets the value corresponding to the given component.
SetValue
method in object AnalysisLocalEntity
Sets the value corresponding to the given component.
SetValues
method in object ToleranceUnitBasisValue
Set tolerance unit basis values (in millimeters).
SetValues
method in object ManufacturingToolCorrector
Defines the corrector values.
SetVectorLock
method in object FittingSettingAtt
Locks or unlocks the VisualizationMode parameter.
SetVelocityColorLock
method in object DevAnalysisSettingAtt
Locks or unlocks the VelocityColor parameter.
SetVelocityLimitLock
method in object DevAnalysisSettingAtt
Locks or unlocks the VelocityLimit parameter.
SetVia
method in object AMPTag
Function to set the via status of the given AMPTag.
SetViaMode
method in object Operation
Sets the Via Mode of the Operation.
SetViewAnalysisParameterLock
method in object AnalysisGeneralSettingAtt
Locks or unlocks the flag.
SetViewAnalysisRelationLock
method in object AnalysisGeneralSettingAtt
Locks or unlocks the flag.
SetViewAssociativityLock
method in object FTAInfraSettingAtt
Locks or unlocks the View Associativity setting parameter value.
SetViewBackgroundModeLock
method in object Layout2DSettingAtt
Locks or unlocks the ViewBackgroundMode parameter.
SetViewFilterCreationModeLock
method in object Layout2DSettingAtt
Locks or unlocks the ViewFilterCreationMode parameter.
SetViewName
method in object DrawingView
Sets the prefix, the ident and the suffix of the name of the drawing view.
SetViewName
method in object Layout2DView
Sets the prefix, the ident and the suffix of the name of the Layout2D view.
SetViewProfileLock
method in object FTAInfraSettingAtt
Locks or unlocks the View Profile setting parameter value.
SetViewReferentialLock
method in object FTAInfraSettingAtt
Locks or unlocks the View Referential setting parameter value.
SetViewReferentialZoomableLock
method in object FTAInfraSettingAtt
Locks or unlocks the View Referential Zoomable setting parameter value.
SetViewerAutoOpenLock
method in object SectioningSettingAtt
Locks or unlocks the ViewerAutoOpen parameter.
SetViewerAutoReframeLock
method in object SectioningSettingAtt
Locks or unlocks the ViewerAutoReframe parameter.
SetViewerLock2DLock
method in object SectioningSettingAtt
Locks or unlocks the ViewerLock2D parameter.
SetViewpointAnimationModeLock
method in object VisualizationSettingAtt
Locks or unlocks the ViewpointAnimationMode setting parameter.
SetVisBaseFrmLock
method in object ImportD5SettingAtt
Locks or unlocks the VisBaseFrm parameter.
SetVisCoorsysLock
method in object ImportD5SettingAtt
Locks or unlocks the VisCoorsys parameter.
SetVisToolFrmLock
method in object ImportD5SettingAtt
Locks or unlocks the VisToolFrm parameter.
SetVisWclPathLock
method in object ImportD5SettingAtt
Locks or unlocks the VisWclPath parameter.
SetVisibility
method in object TCPTrace
Set the TCP trace component (DNBTCPTraceReps) visible (True) or hidden(False).
SetVisibility
method in object DrawingDimExtLine
Set visivility of dimension extension line.
SetVisuFormatUnitLock
method in object MultiCADSettingAtt
Locks or unlocks the VisuFormatUnit parameter.
SetVisu_Mode_2DLock
method in object MigrBatchSettingAtt
Locks or unlocks the "Projection of Space for transparent views" setting parameter.
SetVisualizationModeLock
method in object AnalysisSettingAtt
Locks or unlocks the VisualizationMode parameter.
SetViz2DAccuracyModeLock
method in object VisualizationSettingAtt
Locks or unlocks the 2DAccuracyMode setting parameter.
SetViz2DFixedAccuracyLock
method in object VisualizationSettingAtt
Locks or unlocks the 2DFixedAccuracy setting parameter.
SetViz2DProportionnalAccuracyLock
method in object VisualizationSettingAtt
Locks or unlocks the 2DProportionnalAccuracy setting parameter.
SetViz3DAccuracyModeLock
method in object VisualizationSettingAtt
Locks or unlocks the Viz3DAccuracyMode setting parameter.
SetViz3DCurveAccuracyLock
method in object VisualizationSettingAtt
Locks or unlocks the 3DCurveAccuracy setting parameter.
SetViz3DFixedAccuracyLock
method in object VisualizationSettingAtt
Locks or unlocks the 3DFixedAccuracy setting parameter.
SetViz3DProportionnalAccuracyLock
method in object VisualizationSettingAtt
Locks or unlocks the Viz3DProportionnalAccuracy setting parameter.
SetVolumeSupport
method in object Shell
Set the Support Volume of the faces to modify during Shell operation.
SetVolumeSupport
method in object Thickness
Set support of Thickness feature.
SetVolumeSupport
method in object SewSurface
Sets the volume support for volume sew surface.
SetVolumeSupport
method in object DraftDomain
Value the support of draft.
SetVoxelStaticAnlLock
method in object AnalysisSettingAtt
Locks or unlocks the VoxelStaticAnl parameter.
SetVoxelsLock
method in object CGRAdhesionSettingAtt
Locks or unlocks the Voxels container activation state.
SetWalkActColorLock
method in object HtsTaskDisplaySettingAtt
Locks or unlocks the WalkActColor parameter.
SetWalkActLineTypeLock
method in object HtsTaskDisplaySettingAtt
Locks or unlocks the WalkActLineType parameter.
SetWalkActLineWeightLock
method in object HtsTaskDisplaySettingAtt
Locks or unlocks the WalkActLineWeight parameter.
SetWalkCurveDefPoints
method in object WalkActivity
SetWalkForwardAngleLock
method in object HtsGeneralSettingAtt
Locks or unlocks the WalkForwardAngle parameter.
SetWalkForwardDistanceLock
method in object HtsGeneralSettingAtt
Locks or unlocks the WalkForwardDistance parameter.
SetWeldSpeed
method in object AMPTag
Function to set the weld speed of the given AMPTag.
SetWindowDefaultHeightLock
method in object SectioningSettingAtt
Locks or unlocks the WindowDefaultHeight parameter.
SetWindowDefaultWidthLock
method in object SectioningSettingAtt
Locks or unlocks the WindowDefaultWidth parameter.
SetWindowOpenModeLock
method in object SectioningSettingAtt
Locks or unlocks the WindowOpenMode parameter.
SetWorkInstructionsLock
method in object Export3DXmlSettingAtt
Locks or unlocks the flag.
SetXMLDirLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP XML Directory setting parameter.
SetXMLSchemaLock
method in object IgpOlpSettingAtt
Locks or unlocks the OLP XML Schema setting parameter.
SetXY
method in object Annotation
SetXYZ
method in object Tag
Sets the Position(X, Y, Z) of the Tag.
SetYPR
method in object Tag
Sets the Orientation (Y, P, R) of the Tag.
SetbackValue
property in object HybridShapeSweep
Returns or sets the setback value.
SettingController
object
Represents the base object for setting controllers.
SettingControllers
object
A collection of all the setting controllers objects currently managed by the application.
SettingsNode
property in object SWKManikin
Returns the settings node of the current manikin.
Setups
property in object ManufacturingProcess
Give the List of Setups linked to a Manufacturing Process.
Severity
property in object Check
Returns or sets the check severity.
SewSurface
object
Represents the sewing operation.
SewingIntersectionMode
property in object SewSurface
Returns or sets the sewing mode .
SewingSide
property in object SewSurface
Returns or sets the sewing side .
ShaderMode
property in object VisualizationSettingAtt
Returns the ShaderMode parameter.
ShadowFittingMode
property in object RenderingLight
Returns or sets the light shadow fitting mode.
ShadowMapSize
property in object RenderingLight
Returns or sets the light shadow map size.
ShadowObjectStatus
property in object RenderingLight
Returns or sets the light shadow status on objet.
ShadowStatus
property in object RenderingLight
Returns or sets the light shadow status.
ShadowsStatus
property in object RenderingShooting
Returns or sets the shadows status of shooting.
ShadowsStatus
property in object RenderingEnvironmentWall
Returns or sets the wall shadow status.
Shaft
object
Represents the shaft shape.
ShallowCount
method in object ExpertRuleBaseComponentRuntimes
Returns the number of first-level-depth objects in the collection.
ShallowItem
method in object ExpertRuleBaseComponentRuntimes
Returns a first-level-depth RuleBase component using its index or its name from the RuleBase collection.
ShallowRemove
method in object ExpertRuleBaseComponentRuntimes
Removes an first-level-depth Expert component from the Rule Base collection.
Shape
object
Represents the Shape object.
ShapeFactory
object
Represents the factory for shapes to create all kinds of shapes that may be needed for part design.
ShapeFactory
property in object Part
Returns the part shape factory.
ShapeInstance
object
The interface to access a CATIAShapeInstance.
Shapes
object
The collection of the shapes making up a body.
Shapes
property in object Body
Returns the body's Shapes collection.
Shared
property in object ManufacturingMachinableGeometry
Returns or sets the shared state of a ManufacturingMachinableGeometry object.
SharpnessAngle
property in object HybridShapeHealing
Returns the Sharpness Angle of the healing.
SheetMetalFactory
property in object Part
Returns the sheet metal factory of the part.
SheetMetalParameters
property in object Part
Returns the sheet metal parameters of the part.
SheetScale
property in object Layout2DSheet
Returns or sets the scale of the Layout2D sheet.
Sheets
property in object DrawingRoot
Returns the collection of drawing sheets of the drawing document.
Sheets
property in object DrawingDocument
Returns the collection of drawing sheets of the drawing document.
Sheets
property in object Layout2DRoot
Returns the collection of Layout2D sheets of the part document.
Shell
object
Represents the shell shape.
ShiftValue
property in object ShiftedProfileTolerance
Retrieves or sets shift value of tolerance zone (in millimeters).
ShiftedProfile
property in object FTASettingAtt
Returns or sets the Shifted Profile parameter.
ShiftedProfileTolerance
object
Interface for accessing shifted tolerance zone informations of a TPS.
ShiftedProfileTolerance
method in object Annotation
Get the annotation on the ShiftedProfileTolerance interface.
Shot
object
The interface to access a CATIAShot.
Shots
object
The collection of all shot objects contained in the current sampled.
Shots
property in object Sampled
Returns or sets the Sampled object.
Show
method in object FastenerGroup
Shows all the entities in the fastener group.
ShowActivation
property in object TreeVizManipSettingAtt
Retrieves or Sets the visualization Show/NoShow's mode applied to the specification tree.
ShowCompletionDialogBox
property in object IgesSettingAtt
Returns or sets the Show/No Show dialog box setting parameter value.
ShowLicense
property in object LicenseSettingAtt
Retrieves or Sets the show license .
ShowOnlyFilteredObjects
property in object MfgHubSettingAtt
Retrieves (or sets, if not initialized) the ShowOnlyFilteredObjects attribute.
ShowParameters
property in object FunctionalSystemSettingAtt
Returns or sets the ShowParameters parameter.
ShowRelations
property in object FunctionalSystemSettingAtt
Returns or sets the ShowRelations parameter.
ShowSynchroStatusOfLocalParamCache
property in object FunctionalSystemSettingAtt
Returns or sets the ShowSynchroStatusOfLocalParamCache parameter.
Shuttle
object
The interface to access a CATIAShuttle.
Shuttles
object
The interface to access a CATIAShuttles Using this prefered syntax will enable mkdoc to document your class.
Side
property in object Thread
Returns the thread or tap side.
Side
property in object Constraint
Returns or sets the constraint side.
SideStepAngle
property in object HtsGeneralSettingAtt
Returns or sets the SideStepAngle parameter.
Silhouette
object
Interface to access a CATIASilhouette.
SilhouetteShapeName
method in object Silhouettes
Returns the name of the associated shape.
Silhouettes
object
Interface to compute Silhouettes.
Silhouettes
property in object OptimizerWorkBench
Returns or sets the constraint driving mode.
SimTraceSettingAtt
object
Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Simulation Trace Tools Options Tab page.
SimplificationShapeName
method in object Simplifications
Returns the name of the associated shape.
Simplifications
object
Interface to compute Simplifications.
Simplify
property in object HybridShapeTrim
Returns or sets whether the simplification of the resulting topology is or should be activated.
SimulationInitState
object
Interface used to save/restore the simulation initial state.
SimulationSettingAtt
object
Interface to handle parameters of DELMIA Simulation Tools Options Tab page Role : This interface is implemented by a component which represents the controller of Simulation Tools Options parameter settings.
SingularColor
property in object RobAnalysisSettingAtt
Returns or sets the SingularColor parameter.
Size
property in object File
Returns the size of the file.
Size
method in object DrawingView
Returns the bounding box of the drawing view.
Size
method in object Layout2DView
Returns the bounding box of the Layout2D view.
Size
property in object TreeVizManipSettingAtt
Retrieves or Sets the number of characters shown for the text of the specification tree.
Size
property in object ArrangementArea
Returns the Size of the ArrangementArea.
Size
property in object ManufacturingOutput
Returns the number of bytes written to this data output.
SizeControl
property in object CacheSettingAtt
Return or sets the cache size control.
SizeType
property in object TreeVizManipSettingAtt
Retrieves or Sets the type of size applied to the text of the specification tree.
Sketch
object
The Sketch is a 2D based element comprising constrained 2D geometrical elements.
Sketch
property in object StrPlate
Returns the sketch object of the plate.
Sketch
property in object SketchBasedShape
Returns the sketch the shape is based on.
Sketch
property in object AssemblyHole
Returns the hole positioning sketch.
Sketch
property in object AssemblyPocket
Returns the pocket sketch.
SketchBasedShape
object
Represents the shapes based on sketched 2D geometry.
SketchComponent
property in object AssemblyHole
Returns the component containing the hole positioning sketch.
SketchComponent
property in object AssemblyPocket
Returns the component containing the pocket sketch.
Sketches
object
The body's collection of sketches not yet used by any shape.
Sketches
property in object Body
Returns the body's Sketches collection.
Slide
method in object SchComponent
Slide a component (applicable to inserted component only).
Sliding
property in object ABQSurfaceToSurfaceContact
Sets or returns the sliding type in a contact pair.
Sliding_Type
enum
Sliding types.
SliversAndCrack
property in object AutoFillet
SliversAndCracks
property in object AutoFillet
Returns or sets the slivers face.
Slot
object
Represents the slot shape.
SmoothActivity
property in object HybridShapeSweepLine
Returns whether the sweeping operation is smoothed.
SmoothActivity
property in object HybridShapeSweepConic
Returns or sets information whether sweeping operation is smoothed or not.
SmoothActivity
property in object HybridShapeSweepCircle
Returns or sets information whether a sweeping operation is smoothed or not.
SmoothActivity
property in object HybridShapeSweepExplicit
Returns or sets information whether sweeping operation is smoothed or not.
SmoothAmplitude
property in object ABQLoad
Sets or returns the Smooth Amplitude, given the refernce of the Smooth amplitude.
SmoothAmplitude
property in object ABQDisplacementBC
Sets or returns the Smooth Amplitude, given the refernce of the Smooth amplitude.
SmoothAngleThreshold
property in object HybridShapeLoft
Returns or sets the angular threshold under which discontinuities (moving frame, tangency net on reference surface) will be smoothed.
SmoothAngleThreshold
property in object HybridShapeBlend
Returns the angular threshold.
SmoothAngleThreshold
property in object HybridShapeSweepLine
Returns the angular threshold.
SmoothAngleThreshold
property in object HybridShapeSweepConic
Returns angular threshold under which discontinuities .
SmoothAngleThreshold
property in object HybridShapeSweepCircle
Returns the angular threshold.
SmoothAngleThreshold
property in object HybridShapeSweepExplicit
Returns angular threshold.
SmoothAngleThresholdActivity
property in object HybridShapeLoft
Returns or sets whether a angular threshold is allowed or not during lofting operation in order to smooth it.
SmoothAngleThresholdActivity
property in object HybridShapeBlend
Returns or sets information whether a blending operation is smoothed or not.
SmoothDeviation
property in object HybridShapeLoft
Returns or sets the deviation value (length) allowed during lofting operation in order to smooth it.
SmoothDeviation
property in object HybridShapeBlend
Returns the deviation value (length) from guide curves allowed during a sweeping operation in order to smooth it.
SmoothDeviationActivity
property in object HybridShapeLoft
Returns or sets whether a deviation is allowed or not during lofting operation in order to smooth it.
SmoothDeviationActivity
property in object HybridShapeBlend
Returns or sets information whether a deviation from guide curves is allowed or not.
SmoothingType
property in object HybridShapeProject
Sets or Gets Smoothing Type.
SmoothingType
property in object HybridShapeCurvePar
Returns or sets the smoothing Type.
SnapAngleDistance
property in object ManipSettingAtt
SnapPosition
property in object ManipSettingAtt
Solid
object
Represents an imported solid object.
SolidCombine
object
The interface to access a CATIASolidCombine.
SolidMU
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of mode for isolated Solids Mock-Up migration Role : Returns or sets the state of mode for isolated Solids Mock-Up migration.
SolidMode
property in object HybridShapeIntersection
Returns or sets the SolidMode flag for intersect.
SolutionNo
property in object HybridShapeSweepLine
Returns or sets the choice number, which corresponds to each solution of a given linear sweep case.
SolutionNo
property in object HybridShapeSweepExplicit
Returns or sets the choice number, which corresponds to each solution of a given explicit sweep case.
SolutionType
property in object HybridShapeProject
Returns or sets the solution type.
SolutionType
property in object HybridShapeLineBisecting
Returns or sets the solution type.
SolutionTypeCombine
property in object HybridShapeCombine
Returns or sets whether the curves that create the combined curve are or should be extruded along normals to the curve planes or along given directions.
Solve
method in object ConstraintSatisfaction
Solves the constraint satisfaction problem.
SolveType
property in object ExpertRuleBaseRuntime
Returns or sets the solve option.
SortedItem
method in object Materials
Returns a material from its index in the sorted Material collection.
Sound
property in object AnnotatedView
Returns or sets the path of the sound file associated with the annotated view.
Source
property in object ABQJob
Sets or returns the source for analysis.
Source
property in object Product
Returns or sets the product's source.
SourceElement
property in object Solid
Returns the source element of the imported solid.
SourceProduct
property in object Solid
Returns the source product instance of the imported solid.
SourceType
property in object HybridShapeReflectLine
Returns or sets whether the reflectline curve is or should be created with infinite light source (cylindrical) or with finite point light source (conical).
Spacing
property in object LinearRepartition
Returns the distance between two consecutive shapes along the repartition direction.
SpecV4SettingAtt
object
Represents the V4/V5 SPEC setting controller object.
SpecifiedCycleTime
property in object HumanTask
SpecifiedJointSpeed
property in object HumanTask
SpecsAndGeomWindow
object
Represents a window featuring a specification viewer and a geometry viewer.
SpecsViewer
object
Represents the specification tree viewer.
SpecsViewer
property in object SpecsAndGeomWindow
Returns the specifications viewer.
Specular
property in object RenderingLight
Returns or sets the light specular intensity of a light.
SpecularCoefficient
property in object RenderingMaterial
Returns or sets the specular coefficient of a material.
SpecularExponent
property in object RenderingMaterial
Returns or sets the specular exponent of a material.
Speed
property in object Track
Returns or sets the track speed.
SpeedPercent
property in object MoveHomeAct
This property returns and sets the speed value percentage for the move activity.
SpeedPercent
property in object MoveToPostureActivity
SpeedPercent
property in object MoveJointsAct
This property returns and sets the speed value percentage for the activity.
SphereLightRadius
property in object RenderingLight
Returns or sets the sphere light area radius.
Spine
property in object HybridShapeBlend
Returns or sets a curve used as spine for coupling in Blend computation.
Spine
property in object HybridShapeSweepLine
Returns or sets the sweep operation spine (optional).
Spine
property in object HybridShapeSweepConic
Returns or sets the spine (optional) for sweep operation.
Spine
property in object HybridShapeSweepCircle
Returns or sets the sweep operation spine (optional).
Spine
property in object HybridShapeIntegratedLaw
Gets or sets Spine for implicit law.
Spine
property in object HybridShapeSweepExplicit
Returns or sets the spine (optional) for sweep operation.
Spine
property in object HybridShapeFilletBiTangent
Returns or Sets the spine feature.
Spline2D
object
Class defining a spline in 2D Space.
Split
object
Represents the split operation.
Split
method in object Sampled
Returns or sets the Sampled object.
SplitFunctionalObjectName
property in object FunctionalSystemSettingAtt
Returns or sets the SplitFunctionalObjectName parameter.
SplittingComponent
property in object AssemblySplit
Returns the component containing the splitting element.
SplittingElement
property in object AssemblySplit
Returns the splitting element.
SplittingSide
property in object Split
Returns or sets the splitting side .
SplittingSide
property in object ReplaceFace
Returns or sets the splitting side .
SplittingSide
property in object AssemblySplit
Returns or sets the splitting side.
SpringDef
property in object ABQSpringConnectionProperty
Sets or returns the definition of spring.
SpringDef_Type
enum
SpringDof_Type
enum
SpringType
property in object ABQSpringConnectionProperty
Sets or returns the type of spring.
SpringType_Type
enum
Stabilization
property in object ABQGeneralStaticStep
Returns a boolean indicating whether the stabilization option was selected.
StabilizationMagnitude
property in object ABQGeneralStaticStep
ets and Returns the damping factor if the stabilization method is FACTOR.
StabilizationMethod
property in object ABQGeneralStaticStep
Returns or sets the stabilization method if the Stabilization option is selected.
StabilizationStiffness
property in object ABQGasketProperty
StabilizationStiffnessType
property in object ABQGasketProperty
StabilizationStiffness_Type
enum
Stabilization stiffness types.
Stabilization_Type
enum
Stabilization types.
Standard
property in object AnnotationSet
Retrieves the Parent Standard defined at set creation.
Standard
property in object DrawingRoot
Returns or sets the drawing standard of the drawing document.
Standard
property in object DrawingDocument
Returns or sets the drawing standard of the drawing document.
Standard
property in object Layout2DRoot
Returns or sets the DrawingStandard of the part document.
Standard
property in object FTAInfraSettingAtt
Returns or sets the Tolerancing Standard setting parameter value.
Standard
property in object PspFunctional
Return Standard.
StandardThickness
property in object StrPlate
Returns the standard thickness following the support orientation.
Start
property in object DrawingTextRange
Returns the starting character position of the drawing text range.
Start
method in object BehaviorVBScript
Inform Client VB has Started.
StartAngle
property in object HybridShapeCircle
Returns the circle start angle.
StartCommand
method in object Application
Starts a CATIA command.
StartExtremity
property in object StrMember
Returns the member's start extremity object.
StartExtremityContinuity
property in object HybridShapeCurveSmooth
Returns or sets the continuity condition (curvature, tangency or point) applied to the smoothed curve with regard to the input curve at the start extremity of the input curve.
StartParam
property in object HybridShapeIntegratedLaw
Gets start parameter.
StartPoint
property in object Curve2D
Returns the start point of the curve.
StartPoint
property in object HybridShapeConic
Returns or sets the conic start point.
StartPoint
property in object HybridShapeSpine
Retuns or sets the start point of the spine.
StartPoint
method in object ManufacturingPattern
Sets a point of a Manufacturing Pattern as the start point.
StartSegment
property in object SWKIKConstraint
Returns or sets the first segment of the body to be driven by this constraint.
StartTangent
property in object HybridShapeConic
Returns or sets the tangent direction at the conic start point.
StartUpConnectors
property in object PspClass
Returns a List of start-up Connector object classes.
StartUpFunctions
property in object PspClass
Returns a List of start-up Function object classes.
StartUpPhysicals
property in object PspClass
Returns a List of start-up physical object classes.
StartUp_Model_For_Drawing
property in object MigrBatchSettingAtt
Retrieves or sets the state of the "Initial Drawing Path" setting parameter.
StartWorkbench
method in object Application
Starts a CATIA workbench.
StartingAngle
property in object HybridShapeHelix
Reads the helix starting angle.
StartingPoint
property in object HybridShapeHelix
Reads / Changes the starting point of the Helix.
StartingRadius
property in object HybridShapeSpiral
Reads / Changes the starting radius of the Spiral.
StartupType
property in object PspObject
Returns the Startup type of the object.
StaticCull
property in object VisualizationSettingAtt
Returns the StaticCull parameter.
StaticLOD
property in object VisualizationSettingAtt
Returns the StaticLOD parameter.
Status
property in object ABQLoad
Returns the propagating status of the load.
Status
property in object Constraint
Returns the constraint status.
Status
property in object Conflict
Returns or sets the status of the conflict.
Status
property in object ABQBoundaryCondition
Returns the propagating status of the boundary condition.
Status
method in object ExpertCheckRuntime
Returns the Status of the check.
Status
method in object ExpertRuleSetRuntime
Returns the Status of the ruleset: 1=OK, 0=KO.
StatusBar
property in object Application
Returns or sets the text displayed in the application's window status bar.
Step
property in object FreeParameter
Returns or sets the initial step used by the optimisation to look for a better solution.
StepByStepUpdateAndReroute
property in object SpecV4SettingAtt
Returns or sets the activation state of Step By Step Update And Reroute.
StepNum
property in object ABQInitialTemperature
Sets or returns the step number from which to read the temperature data.
StepSettingAtt
object
The interface to access a CATIAStepSettingAtt.
Steps
property in object ABQAnalysisCase
Returns the Abaqus analysis steps associated with this analysis case.
StereoMode
property in object VisualizationSettingAtt
Returns the StereoMode parameter.
StiDBChildren
object
Represents all the Children of a CATIAStiDBItem.
StiDBItem
object
Represents the SmarTeam Integration Object, that is to say the Document coming from SmarTeam database.
StiEngine
object
Represents the SmarTeam Integration Engine, that is to say the entry point to the CATIA/SmarTeam Integration.
Stiffener
object
Represents the stiffener shape.
StockGeometriesCount
method in object ManufacturingSetup
Returns the number of stock geometries from a Manufacturing Setup.
StrAnchorPoint
object
Represents an anchor point.
StrAnchorPoints
object
A collection of the anchor points of a section object.
StrAnchorPoints
property in object StrSection
Returns the collection of anchor points.
StrComputeServices
object
Represents a structure service object.
StrComputeServices
property in object StrWorkbench
Returns the compute services object.
StrCutback
object
Represents the cutback object.
StrFoundation
object
Represents a structure foundation assembly.
StrFoundations
object
A collection of the Foundation objects contained in a given Product object of a ProductDocument object.
StrMember
object
Represents a member object.
StrMemberExtremity
object
Represents an extremity of a member object.
StrMembers
object
A collection of the Member objects contained in a given Product object of a ProductDocument object.
StrObject
object
Represents a structure object.
StrObjectFactory
object
Represents the factory object for all the structure objects.
StrParam
object
Represents the string parameter.
StrPlate
object
Represents a structure plate object.
StrPlates
object
A collection of the Plate objects contained in a given Product object of a ProductDocument object.
StrSection
object
Represents the section object.
StrWorkbench
object
Represents the structure workbench object.
Stride
property in object WalkActivity
StrikeThru
property in object DrawingTextProperties
Returns or sets the drawing text font strikethrough property.
StringUsedAsCarriageReturn
property in object FunctionalSystemSettingAtt
Returns or sets the StringUsedAsCarriageReturn parameter.
Style
property in object PointFastener
ets the CGR Style representation for the fastener in the 3D Viewer.
Style
property in object FastenerGroup
ets the CGR Style representation for the Spot Welds in the 3D Viewer.
StyleSheetDir
property in object FASReportingSettingAtt
Gets value of "OLP Robot Program Directory" parameter.
StyleSheetPath
property in object WorkGeneralSettingAtt
Returns or sets the ConstraintsSimul parameter.
SubFolders
property in object Folder
Returns the folder collection of the folder.
SubList
method in object Relations
Returns a sub-collection of relations aggregated to an object.
SubList
method in object Parameters
Returns a sub-collection of parameters aggregated to an object.
SubShuttles
property in object Shuttle
Returns any shuttles that are contained within the current shuttle.
SubType
property in object HybridShapeSweepExplicit
Returns or sets the explicit sweep subtype.
SubTypes
property in object ArrNomenclature
Returns the collection of subtype UserNomenclatures within this UserNomenclature.
SubmitJob
method in object ABQJob
Submits the job.
Subscript
property in object DrawingTextProperties
Returns or sets the drawing text font subscript property.
SucceedItem
method in object ExpertReportObjects
Retrieves a report component from a succeeded tuples collection, using its index or its name from the Check collection.
Succeeds
property in object ExpertCheckRuntime
Returns the list of the tuples that satisfy this check.
SupRange
property in object FreeParameter
Returns or sets the superior bound of the free parameter object.
SuperType
property in object Annotation
Get the Super Type.
SuperTypeName
property in object ArrNomenclature
Superscript
property in object DrawingTextProperties
Returns or sets the drawing text font superscript property.
Support
property in object HybridShapeTrim
Returns or sets the support element.
Support
property in object HybridShapeSplit
Returns or sets the support element.
Support
property in object StrPlate
Returns or sets the support of the plate.
Support
property in object StrMember
Retrieves the result support object.
Support
property in object HybridShapeSpiral
Reads / Changes the spiral plane support.
Support
property in object HybridShapeCorner
Returns or sets the corner support.
Support
property in object HybridShapeConnect
Returns or sets the supporting face.
Support
property in object HybridShapeDevelop
Returns or sets the support revolution surface on which the development is operated.
Support
property in object HybridShapeProject
Returns or sets the support element.
Support
property in object HybridShapeExtract
Returns or sets the support for the extract.
Support
property in object HybridShapeLinePtPt
Returns or Sets the supporting surface.
Support
property in object HybridShapeCurvePar
Returns or sets the support of the curve.
Support
property in object HybridShapeBoundary
Returns or sets the support surface around which the boundary is computed.
Support
property in object HybridShapeExtrapol
Returns or sets the support surface.
Support
property in object HybridShapeLinePtDir
Returns or Sets the supporting surface.
Support
property in object HybridShapeCircleCtrPt
Returns or sets the circle support surface.
Support
property in object HybridShapeReflectLine
Returns or sets the support surface used to create the reflectline.
Support
property in object HybridShapeCurveSmooth
Returns or sets the support of the curve.
Support
property in object HybridShapeCircleCtrRad
Returns or sets the circle support surface.
Support
property in object HybridShapeLineTangency
Returns or Sets the support surface.
Support
property in object HybridShapePointBetween
Returns or Sets the support.
Support
property in object HybridShapeCircle3Points
Returns or sets the circle support surface.
Support
property in object HybridShapeLineBiTangent
Returns or Sets the supporting surface.
Support
property in object HybridShapeLineBisecting
Returns or sets the support used to create the bisecting line.
Support
property in object HybridShapeExtremumPolar
returns or sets the support (if exist).
Support
property in object HybridShapeCircle2PointsRad
Returns or sets the circle support surface.
Support
property in object HybridShapeCircleTritangent
Returns or sets the circle support surface.
Support
property in object HybridShapeCircleCenterTangent
Returns or sets the circle support surface.
Support
property in object HybridShapeCircleBitangentPoint
Returns or sets the circle support surface.
Support
property in object HybridShapeCircleBitangentRadius
Returns or sets the circle support surface.
SupportPlane
property in object HybridShapeConic
Returns or sets the conic supporting plane.
SupportProperty
property in object ABQGasketProperty
Sets or returns the 3D structrel property.
SupportSurface
property in object AutoFillet
Returns or sets the support surface.
SupportsTrimMode
property in object HybridShapeFilletBiTangent
Returns or Sets whether support surfaces are trimmed or not.
SupportsTrimMode
property in object HybridShapeFilletTriTangent
Returns or sets whether support surfaces are trimmed or not.
SuppressEnumerateValues
method in object IntParam
Resets the status of the object to a single value object.
SuppressEnumerateValues
method in object StrParam
Resets the status of the object to a single value object.
SuppressEnumerateValues
method in object RealParam
Resets the status of the object to a single value object.
SuppressMode
property in object HybridShapeOffset
Returns or sets suppress mode.
Surface
property in object SurfaceBasedShape
Returns or sets the surface.
Surface
property in object HybridShapeLineAngle
Role : Get the support surface.
Surface
property in object HybridShapeWrapCurve
Returns or sets the surface to deform of the WrapCurve.
Surface
property in object HybridShapeLineNormal
Returns or Sets the surface to which the line will be normal.
Surface
property in object HybridShapeWrapSurface
Returns or sets the reference surface to deform of the WrapSurface.
Surface
property in object HybridShapePlaneTangent
Role : Get the surface to which the plane is to be tangent.
Surface
property in object HybridShapePointOnSurface
Returns or Sets the surface.
SurfaceAccuracy
property in object Export3DXmlSettingAtt
Returns or sets the surface accuracy.
SurfaceBasedShape
object
Represents the shapes based on Surface.
SurfaceElementsLocation
property in object PartInfrastructureSettingAtt
Returns or sets the "SurfaceElementsLocation" parameter.
SurfaceReference
property in object StrMember
Retrieves or sets the surface reference object for the member.
SurfaceToUnfold
property in object HybridShapeUnfold
Returns or sets the surface to unfold.
SurfaceToUnfold
property in object HybridShapeTransfer
Returns or sets the surface to unfold.
SurfaceType
property in object HybridShapeUnfold
Returns or sets the type of surface to unfold.
SurfacicWeigth
property in object CompositesMaterial
returns or set the surfacic weigth defined in Composites tab in kg per m2.
Suspend
method in object BehaviorVBScript
SwapMasterSlave
property in object ABQFastenedPair
Sets or returns the swap master/slave surface flag.
SwapMasterSlave
property in object ABQSurfaceToSurfaceContact
Returns the activation status if the master surface is swapped as slave surface.
SwapMasterSlave
property in object ABQFastenedConnectionEnhancement
Sets or returns the swap master/slave surface flag.
Sweep
object
Represents the sweep shape.
SweptVolume
object
SweptVolumes
object
Interface to compute swept volumes.
SweptVolumes
property in object OptimizerWorkBench
Returns SweptVolumes.
Swing
property in object WalkActivity
Switch
method in object SchCompGraphic
Replace the input image object with an image of the graphical representation with the input name.
SwitchAll
method in object SchCompGraphic
Replace all occurances of the images of this component with those of the graphical representation with the input name.
SwitchEndTangentDirection
method in object HybridShapeConic
Inverts the tangent direction orientation at the conic end point.
SwitchIntermediateTangentDirection
method in object HybridShapeConic
Inverts the tangent direction orientation of one of the conic intermediate points.
SwitchOn
property in object AnnotationSet
Gets or Sets Annotation Set Visualization.
SwitchStartTangentDirection
method in object HybridShapeConic
Inverts the tangent direction orientation at the conic start point.
Symbol
property in object Unit
Returns the symbol associated to the unit.
Symbol
property in object PointFastener
ets the symbol for representation for the fastener in the 3D Viewer.
Symbol
property in object FastenerGroup
ets the symbol for representation for the Spot Welds in the 3D Viewer.
SymbolsSide
property in object DrawingDimension
Returns or sets symbol side of dimension line.
SymetricValue
property in object DimensionLimit
Returns or sets whether the dimension limit is symmetric.
SymmetricalExtension
property in object HybridShapeExtrude
Returns or sets the symmetrical extension on Extrude limits.
SymmetricalExtension
property in object HybridShapeCylinder
Returns or sets the symmetrical extension on Cylinder lengths.
Symmetry
object
Represents the shape symmetry feature object.
SyncAnlSpecs
property in object AnalysisSettingAtt
Returns or sets the SyncAnlSpecs parameter.
SyncTimeAndSpeedInSimulation
property in object HtsGeneralSettingAtt
Returns or sets the SyncTimeAndSpeed parameter.
Synchronize
method in object DesignTable
Synchronizes the design table with its source file.
Synchronize
method in object AsySimActivity
Updates the simulation world up to this activity.
SynchronizeStatus
method in object ExpertRuleBaseRuntime
Returns the Synchronize information.
SystemConfiguration
object
Provides abstractions to resources which depend on the platform or the current configuration.
SystemConfiguration
property in object Application
Returns the system configuration object (an object which provides access to system or configuration dependent resources).
SystemService
object
Represents an object which provides system services.
SystemService
property in object Application
Returns system services.
set_DPELoginInfo
method in object OrderGenerator
Set DPE Login Information.
set_DefaultValues
method in object ManufacturingMachine
Initialise the Manufacturing Machine parameters.
set_Description
method in object FunctionalObjectProxy
set the description attached to the proxi.
set_Export3DXML
method in object OrderGenerator
Set Export 3D XML Flag.
set_ExportImageCapture
method in object OrderGenerator
Set Export Image Capture Flag.
set_ExportJobXML
method in object OrderGenerator
Set Export Job XML Flag.
set_ExportPrecXML
method in object OrderGenerator
Set Export Precedence XML Flag.
set_FTP
method in object OrderGenerator
Set FTP Flag.
set_FTPServerInformation
method in object OrderGenerator
Set FTP Information.
set_FilterInputString
method in object OrderGenerator
Set Filter String.
set_GeneratePackNGo
method in object OrderGenerator
Set Generate PackNGo Flag.
set_GenerateSMGMappingXML
method in object OrderGenerator
Set Generate SMG Mapping XML Flag.
set_GenerateSMGXML
method in object OrderGenerator
Set Generate SMG XML Flag.
set_GenerateSMGXmlExePath
method in object OrderGenerator
Set Generate SMG XML EXE Path.
set_LitePackNGo
method in object OrderGenerator
Set Lite PackNGo Flag.
set_LoadContext
method in object OrderGenerator
Set Load Context Type.
set_LoadPositions
method in object OrderGenerator
Set Load Positions Type.
set_ManufacturingContext
method in object OrderGenerator
Set Manufacturing Context Flag.
set_ProcessName
method in object OrderGenerator
Set Process Name.
set_RequestType
method in object OrderGenerator
Set Request Type.
set_RequestedNodeDetails
method in object OrderGenerator
Set Requested Node Details.
set_SetEncryptionMode
method in object OrderGenerator
Set Encryption Mode.
set_SpecifiedCycleTime
method in object HumanTask
set_SpecifiedJointSpeed
method in object HumanTask
sets the joint speed on the specified task(speed should be between 0.
set_TransactionID
method in object OrderGenerator
Set Transaction Type.
set_UpdatereleaseTable
method in object OrderGenerator
Set Update Release Table Flag.
set_Zip
method in object OrderGenerator
Set Zip Flag.
sinkTemperature
property in object ABQFilmCondition
ets or returns the reference sink temperature.
swap_OffsetSide
method in object ThickSurface
Swap the side of the offset.
TCPTrace
object
Interface representing a TCP trace.
TCPTraceActivity
object
Interface representing TCPTraceActivity.
TCPTraceManager
object
Interface representing an accessor to TCP traces object from a product.
TCPTraceManagerGraphics
object
Interface used to modify the default graphical properties of TCP traces.
TCPTraceMode
property in object TCPTraceManager
Indicates if the tracing capability is activ or not.
THEM
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the thematic field.
THERM_COND
property in object PCBComponent
Allow to get and set the thermal conductivity of a component.
THETA_JB
property in object PCBComponent
Allow to get and set the junction to board thermal resistance of a component.
THETA_JC
property in object PCBComponent
Allow to get and set the junction to case thermal resistance of a component.
TIME
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the time and date field.
TOLERANCE
property in object PCBComponent
Allow to get and set the TOLERANCE of a component.
TPSStatus
property in object Annotation
Get the TPS Status.
TPSView
object
TPSViewFactory
object
Represents the TPS view factory object.
TPSViewFactory
property in object AnnotationSet
Obtain the factory to create TPS Views.
TPSViews
object
Interface for collection of TPS Views CATIATPSView.
TPSViews
property in object Capture
Retrieves the TPS Views that are visualy managed by this Capture.
TPSViews
property in object AnnotationSet
Retrieves all the TPSViews that belong to the set.
Tables
property in object DrawingView
Returns the drawing table collection of the drawing view.
Tables
property in object Layout2DView
Returns the drawing table collection of the drawing view.
TabularAmplitude
property in object ABQLoad
Sets or returns the amplitude, given the Tabular amplitude refrence.
TabularAmplitude
property in object ABQDisplacementBC
Sets or returns the amplitude, given the Tabular amplitude refrence.
TabulatedLimit
property in object DimensionLimit
Returns or sets the dimension tabulated limit.
Tag
object
Interface representing a Tag.
TagFactory
object
Interface representing Tag factory.
TagGroup
object
Interface representing a TagGroup.
TagGroupFactory
object
Interface representing TagGroup factory.
TailSymbol
property in object DrawingArrow
Returns or sets symbol type of tail side.
TailTarget
property in object DrawingArrow
Returns or sets target element of tail side.
TangencyAngle
property in object HybridShapeHealing
Returns the Tangency Angle of the healing.
TangencyObjective
property in object HybridShapeHealing
Returns the Tangency Objective of the healing.
TangencyThreshold
property in object HybridShapeCurveSmooth
Returns the TangencyThreshold.
TangentCurve
property in object HybridShapeCircleCenterTangent
Returns or sets the tangent curve to which the circle will be tangent.
TangentIntPoint
property in object HybridShapeConic
Returns or sets the conic tangent intersection point.
TangentOrientation1
property in object HybridShapeCircleTritangent
Returns or sets the tangent orientation of the circle first reference element.
TangentOrientation1
property in object HybridShapeCircleCenterTangent
Returns or sets the tangent orientation of the circle first reference element.
TangentOrientation1
property in object HybridShapeCircleBitangentPoint
Returns or sets the tangent orientation of the circle first reference element.
TangentOrientation1
property in object HybridShapeCircleBitangentRadius
Returns or sets the tangent orientation of the circle first reference element.
TangentOrientation2
property in object HybridShapeCircleTritangent
Returns or sets the tangent orientation of the circle second reference element.
TangentOrientation2
property in object HybridShapeCircleCenterTangent
Returns or sets the tangent orientation of the circle second reference element.
TangentOrientation2
property in object HybridShapeCircleBitangentPoint
Returns or sets the tangent orientation of the circle second reference element.
TangentOrientation2
property in object HybridShapeCircleBitangentRadius
Returns or sets the tangent orientation of the circle second reference element.
TangentOrientation3
property in object HybridShapeCircleTritangent
Returns or sets the tangent orientation of the circle third reference element.
TangentPlane
object
Interface for accessing Tangent Plane modifier on a TPS.
TangentPlane
method in object Annotation
Get the annotation on the TangentPlane interface.
TaperAngle
property in object HybridShapeHelix
Reads the helix taper angle.
TaperOutward
property in object HybridShapeHelix
Reads / Modifies the taper angle sense of variation.
TargetAxis
property in object HybridShapeAxisToAxis
Returns or sets the target axis.
TargetMethod
property in object ABQMassScaling
Sets or returns the target time scaling method.
TargetOperation
property in object ManufacturingPrecedence
Returns the target object of the precedence, but with the Operation interface if it is.
TargetOrientationMode
property in object HybridShapeUnfold
Returns or sets the mode for target surface orientation.
TargetPlane
property in object HybridShapeUnfold
Returns or sets the target plane.
TargetSurface
property in object HybridShapeWrapSurface
Returns or sets the target surface of the WrapSurface.
TargetTime
property in object ABQMassScaling
Sets or returns the scaling target time.
TargetTimeOn
property in object ABQMassScaling
Sets or returns whether the target time scaling is active.
TargetType
property in object MoveActionActivity
TargetValue
property in object Optimization
Returns the objective parameter target value.
Targets
property in object DatumSimple
Retrieves a CATITPSList to read the list of datum target.
Task
object
Represents the Task of a resource.
TaskList
property in object HumanProgram
TechnicalDocumentationPath
property in object DocumentationSettingAtt
Returns the technical documentation location (path) parameter.
TempOutputDirectory
property in object AnalysisReportingSettingAtt
Returns or sets the TempOutputDirectory parameter.
TemporaryDirectory
property in object FileSystem
Returns the temporary system directory.
TerminationAttrList
property in object PlugMapViewSettingAtt
Returns or sets the ConstraintsSimul parameter.
TerminationIDNumber
property in object EHMInsertionActPlugMapViewData
Gets Termination ID Number.
TerminationName
property in object EHMInsertionActPlugMapViewData
Gets Termination Name.
TerminationNumber
property in object EHMInsertionActPlugMapViewData
Gets Termination Number.
TerminationRefDesignator
property in object EHMInsertionActPlugMapViewData
Gets Termination Reference Designator.
TerminationSubType
property in object EHMInsertionActPlugMapViewData
Gets Termination Sub Type.
TerminationType
property in object EHMInsertionActPlugMapViewData
Gets Termination Type.
TestInput
method in object Behavior
Tests if the behavior's input is set or not.
TestInternal
method in object BehaviorVBScript
Test for one available output of the behavior.
TestOutput
method in object Behavior
Tests if the behavior's output is set or not.
Text
object
Interface for the TPS Text object.
Text
property in object Noa
Retrieves or sets Text Representation.
Text
property in object Text
Get the annotation's text.
Text
property in object FlagNote
Retrieves text.
Text
method in object Annotation
Get the annotation on the Text interface.
Text
property in object Marker2D
Returns or sets the text for a text Marker2D.
Text
property in object Marker3D
Returns or sets the text for a text marker 3D.
Text
property in object DrawingText
Returns or sets character string that makes up the text.
Text
property in object DrawingTextRange
Returns or sets the character string making up the drawing text range.
TextAngle
property in object Marker2D
Returns or sets the text's angle for a text Marker2D.
TextBlanking
property in object PageSetup
TextFont
property in object Marker2D
Returns or sets the text's font for a text Marker2D.
TextFont
property in object Marker3D
Returns or sets the text's font for a marker 3D.
TextMigration
property in object V4V5SpaceSettingAtt
Returns or sets the activation state of mode for 3D Text migration Role : Returns or sets the state of mode for 3D Text migration.
TextOrientation
property in object Marker2D
Return or set the orientation of text.
TextOrientation
property in object Marker3D
Returns or sets the orientation of text.
TextProperties
property in object DrawingText
Returns the text properties of the drawing text.
TextProperties
property in object DrawingWelding
Returns the text properties of the drawing welding.
TextProperties
property in object DrawingTextRange
TextScaling
property in object PageSetup
Returns or sets text scaling option for print.
TextSize
property in object Marker2D
Returns or sets the text's size for a text Marker2D.
TextSize
property in object Marker3D
Returns or sets the text's size for a marker 3D.
TextStream
object
The textstream object allows to manage input and output for a text stream.
TextVisualization
property in object ExpertRuleBaseRuntime
Returns or sets the Report option for visualization.
Texts
property in object DrawingView
Returns the drawing text collection of the drawing view.
Texts
property in object Layout2DView
Returns the drawing text collection of the Layout2D view.
Texture
property in object RenderingEnvironmentWall
Returns or sets the wall texture name.
TextureAmplitude
property in object RenderingMaterial
Returns or sets the 3d texture amplitude coefficient.
TextureComplexity
property in object RenderingMaterial
Returns or sets the 3d texture complexity.
TextureGain
property in object RenderingMaterial
Returns or sets the 3d texture gain coefficient.
TextureImage
property in object RenderingMaterial
Returns or sets the texture image pathname of a material.
TexturePerturbation
property in object RenderingMaterial
Returns or sets the 3d texture perturbation coefficient.
TextureTurbulence
property in object RenderingMaterial
Returns or sets the 3d texture turbulence status.
TextureType
property in object RenderingMaterial
Returns or sets the texture type of a material.
TextureVeinAmplitude
property in object RenderingMaterial
Returns or sets the 3d texture vein amplitude coefficient.
TexturesStatus
property in object RenderingShooting
Returns or sets the textures status of shooting.
ThickSurface
object
Represents the ThickSurface feature.
Thickness
object
Represents the thickness shape.
Thickness
property in object Stiffener
Returns the stiffener thickness.
Thickness
property in object HybridShape
Returns the thickness of the hybrid shape.
Thickness
property in object DrawingDimLine
Returns or sets thickness of dimension line.
Thickness
property in object Section
Returns or sets the thickness of the section.
Thickness
property in object DrawingDimExtLine
Returns or sets thickness of extension line.
Thickness1
property in object HybridShapeThickness
Returns or sets the first thickness value in mm.
Thickness1Value
property in object HybridShapeThickness
Returns the first thickness value.
Thickness2
property in object HybridShapeThickness
Returns or sets the second thickness value in mm.
Thickness2Value
property in object HybridShapeThickness
Returns the second thickness value.
ThicknessFromTop
property in object Stiffener
Returns the stiffener thickness top in case of From Top stiffener.
ThicknessListPath
property in object PathESSRessourcesSettingAtt
Returns or sets the ThicknessListPath parameter.
ThicknessShapeName
method in object DMOThicknesses
Returns the name of the associated shape.
Thicknesses
property in object OptimizerWorkBench
Returns Thicknesses.
Third
property in object HybridShapePlane3Points
Returns or sets the third point.
ThirdGuideCrv
property in object HybridShapeSweepConic
Returns or sets the third guide curve.
ThirdGuideCrv
property in object HybridShapeSweepCircle
Returns or sets the sweep operation third guide curve.
ThirdPoint
property in object HybridShapeRotate
Returns or sets the third point defining the rotation.
Thread
object
Represents the Thread feature.
ThreadDepth
property in object Hole
Returns the hole thread depth.
ThreadDescription
property in object Thread
Returns the thread/tap description parameter.
ThreadDiameter
property in object Hole
Returns the hole thread diameter.
ThreadPitch
property in object Hole
Returns the hole thread pitch.
ThreadSide
property in object Hole
Returns the hole thread side.
ThreadingMode
property in object Hole
Returns the hole threading mode.
Threads
property in object DrawingView
Returns the drawing thread collection of the drawing view.
Threads
property in object Layout2DView
Returns the drawing thread collection of the Layout2D view.
ThreeDCutShapeName
method in object ThreeDCuts
Returns the name of the associated shape.
ThreeDCuts
object
TildeDisplay
property in object MeasureSettingAtt
Returns or sets the TildeDisplay parameter.
Time
property in object Sampled
Retrieves/sets the sampled's time.
TimeAmplitudeTableSize
property in object ABQTabularAmplitude
Returns the size of the time/amplitude table.
TimeAmplitudeTableSize
property in object ABQSmoothStepAmplitude
Returns the size of the time/amplitude table.
TimeIncrementationMethod
property in object ABQHeatTransferStep
ets or returns the incrementation type.
TimeIncrementationMethod
property in object ABQGeneralStaticStep
Returns or sets the type of the incrementation during the step.
TimeIncrementationMethod
property in object ABQExplicitDynamicsStep
Sets or returns the type of the incrementation during the step.
TimePeriod
property in object ABQHeatTransferStep
Sets or returns the step time.
TimePeriod
property in object ABQGeneralStaticStep
Returns or sets the total time period of the Abaqus general static step.
TimePeriod
property in object ABQExplicitDynamicsStep
Sets or returns the total time period of the Abaqus explicit dynamics step.
TimeRoll
property in object GeneralSessionSettingAtt
Returns the data save parameter (in milliseconds).
TimeScalingFactor
property in object ABQExplicitDynamicsStep
Sets or returns the time scaling factor.
TimeSpan
property in object ABQTabularAmplitude
Sets or returns the timespan in tabular amplitude.
TimeSpan
property in object ABQSmoothStepAmplitude
Sets or returns the timespan in smooth step amplitude.
TimeSpan_Type
enum
Time span types.
TimeUnit
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the time unit field.
TimestampMode
property in object CacheSettingAtt
Retrieves or sets the timestamp control.
To
property in object HybridShapeBoundary
Removes or sets the starting limit(i.
To
property in object FunctionalAction
Get the To object.
ToOrientation
property in object HybridShapeBoundary
Gets or sets the Starting Limit Orientation (i.
TolJoin
property in object IgesSettingAtt
Returns or sets the join tolerance setting parameter value.
TolOptInvalidGeom
property in object IgesSettingAtt
Returns or sets the InvalidGeom Tolerance setting parameter value.
Tolerance
property in object IgesSettingAtt
Returns or sets the tolerance ( optimize - fitting ) setting parameter value.
TolerancePerUnitBasisRestrictiveValue
object
Interface for accessing tolerance per unit basis restrictive value on a TPS.
TolerancePerUnitBasisRestrictiveValue
method in object Annotation
Get the annotation on the TolerancePerUnitBasisRestrictiveValue interface.
ToleranceSheetSettingAtt
object
The interface to access a CATIAToleranceSheetSettingAtt.
ToleranceUnitBasisValue
object
Interface for accessing values of the tolerance unit basis on a TPS.
ToleranceUnitBasisValue
method in object Annotation
Get the annotation on the ToleranceUnitBasisValue interface.
ToleranceZone
object
Interface for accessing tolerance zone informations of a TPS.
ToleranceZone
method in object Annotation
Get the annotation on the ToleranceZone interface.
TolerantMode
property in object HybridShapeFill
Returns or sets the Tolerant mode option.
Tool
property in object MountActivity
This property returns and sets the tool to mount.
Tool
property in object UnmountActivity
This property returns and sets the tool to Unmount.
Tool
property in object ManufacturingActivity
Retreive the Tool of a Manufacturing Activity.
Tool
property in object ManufacturingToolAssembly
Returns the tool of an assembly.
ToolAssembly
property in object ManufacturingActivity
Retreive the ToolAssembly of a Manufacturing Activity.
ToolAxisStrategy
property in object ManufacturingPattern
Returns or sets the Tool Axis Strategy of a Manufacturing Pattern.
ToolNumber
property in object ManufacturingTool
Give the Number linked to a Manufacturing Tool.
ToolNumber
property in object ManufacturingToolAssembly
Returns the number linked to a tool assembly.
ToolProfile
property in object MountActivity
ToolProfile
property in object UnmountActivity
ToolType
property in object ManufacturingTool
Return the technological type of a the tool.
Top
property in object Window
Returns or sets the distance of the window with respect to the inner top side of the frame.
Top
property in object Application
Returns or sets the distance from the application'si frame window top to the top of the screen.
TopMargin
property in object PageSetup
Returns or sets the top margin.
TopOffset
property in object ThickSurface
Returns the value of the top offset.
TopType
property in object ManufacturingPrismaticMachiningArea
Returns or sets the Hardness Mode on top of a Manufacturing Prismatic Machining Area.
TopologySimplificationActivity
property in object HybridShapeCurveSmooth
Returns or sets the TopologySimplificationActivity.
TotalPoints
property in object TCPTrace
Returns the number of points in the trace.
TotalTime
property in object ManufacturingActivity
Retreive the total Time of a Manufacturing Activity.
TraceAxisColor
property in object SimTraceSettingAtt
Returns or sets the TraceAxisColor parameter.
TraceAxisThick
property in object SimTraceSettingAtt
Returns or sets the TraceAxisThick parameter.
TraceAxisType
property in object SimTraceSettingAtt
Returns or sets the TraceAxisType parameter.
TraceAxisVisu
property in object SimTraceSettingAtt
Returns or sets the TraceAxisVisu parameter.
TraceDeletePath
property in object SimTraceSettingAtt
Returns or sets the TraceDeletePath parameter.
TraceLegend
property in object SimTraceSettingAtt
Returns or sets the TraceLegend parameter.
TraceLineColor
property in object SimTraceSettingAtt
Returns or sets the TraceLineColor parameter.
TraceLineThick
property in object SimTraceSettingAtt
Returns or sets the TraceLineThick parameter.
TraceLineType
property in object SimTraceSettingAtt
Returns or sets the TraceLineType parameter.
TraceLineVisu
property in object SimTraceSettingAtt
Returns or sets the TraceLineVisu parameter.
TraceName
property in object TCPTrace
Manage the name of the trace.
TracePointColor
property in object SimTraceSettingAtt
Returns or sets the TracePointColor parameter.
TracePointSymbol
property in object SimTraceSettingAtt
Returns or sets the TracePointSymbol parameter.
TracePointVisu
property in object SimTraceSettingAtt
Returns or sets the TracePointVisu parameter.
Track
object
The interface to access a CATIATrack.
TrackAutoUpdate
property in object FittingSettingAtt
Tracks
object
A collection of all the track objects contained in the current document.
TransferWithTarget
property in object SWKIKConstraint
Returns or sets the Transfer With Target property.
TransfertToView
method in object Annotation
Move the annotation in another view.
Transform
method in object SchMovable
Transform a schematic object with a transformation matrix.
TransformationShape
object
Represents the shapes based on a transformation of another shape.
Translate
object
Represents the hybrid shape translate feature object.
Translate
method in object Viewer3D
Applies a translation.
Translate
method in object SchMovable
Translate a schematic object with a vector.
TranslationU
property in object RenderingEnvironmentWall
Returns or sets the texture offset along the U axis.
TranslationV
property in object RenderingEnvironmentWall
Returns or sets the texture offset along the V axis.
TranslatorMode
property in object MultiCADSettingAtt
TransparencyCoefficient
property in object RenderingMaterial
Returns or sets the transparency coefficient of a material.
TransparencyMode
property in object VisualizationSettingAtt
Returns the TransparencyMode parameter.
TravelColor
property in object DevAnalysisSettingAtt
Returns or sets the TravelColor parameter.
TravelLimit
property in object DevAnalysisSettingAtt
Returns or sets the TravelLimit parameter.
TreeTabSettingAtt
object
TreeVizManipSettingAtt
object
The Interface to retrieve and set the visual information on the specification tree.
TriDimFeatEdge
object
1-D boundary belonging to a feature whose topological result is three dimensional.
TriDimFeatVertexOrBiDimFeatVertex
object
0-D boundary belonging to a feature whose topological result is three dimensional or two dimentional.
Trim
object
Represents the Trim, or union trim boolean operation.
Trim
property in object HybridShapeCorner
Returns or sets whether the corner reference curves are or should be trimmed.
Trim
property in object HybridShapeConnect
Gets or Sets the trim mode.
TrimMode
property in object HybridShapeCorner
Returns or sets whether the corner reference curves are or should be trimmed.
TrimMode
property in object HybridShapeCircleTritangent
Returns or sets whether the circle reference curves are or should be trimmed.
TrimMode
property in object HybridShapeCircleBitangentPoint
Returns or sets whether the circle reference curves are or should be trimmed.
TrimMode
property in object HybridShapeCircleBitangentRadius
Returns or sets whether the circle reference curves are or should be trimmed.
TrimOption
property in object HybridShapeSweepLine
Returns or sets the trim option.
TrimOption
property in object HybridShapeSweepCircle
Returns or sets the trim option status.
TritangentFillet
object
TrueColorMode
property in object PartInfrastructureSettingAtt
Returns or sets the "ColorInheritanceMode" parameter.
TrueDimMode
property in object DrawingDimension
Returns or sets true dimension mode or not.
TrueDimension
property in object FTASettingAtt
Returns the TrueDimension parameter.
TwoSideLightingMode
property in object VisualizationSettingAtt
Returns the TwoSideLightingMode parameter.
Type
property in object File
Returns the type of the file.
Type
property in object Camera
Returns the camera's type.
Type
property in object Hole
Returns the hole type.
Type
property in object ABQJob
Returns or sets the job type.
Type
property in object Activity
This method returns the type of the current activity.
Type
property in object ABQLoad
Returns the type of the load.
Type
property in object ABQStep
Returns the type of the step.
Type
property in object ProductScene
Returns the type of the Product-Scene.
Type
property in object Annotation
Get the Type.
Type
property in object AxisSystem
Returns or sets the type of the axis system.
Type
property in object Constraint
Returns the constraint type.
Type
property in object ABQProperty
Returns the type of the property.
Type
property in object SelectedElement
Returns the string constant which describes the selected element Automation type.
Type
property in object Marker2D
Returns the type of the marker 2D.
Type
property in object Marker3D
Returns the type of the marker 3D.
Type
property in object Joint
Returns the joint type.
Type
property in object StrObject
Returns the type of the structure object.
Type
property in object RenderingLight
Returns or sets the light type.
Type
property in object ABQInteraction
Returns the type of the Interaction.
Type
property in object HybridShapeSpiral
Reads / Changes the spiral type.
Type
property in object ABQTemperature
Returns the type of the Temperature.
Type
property in object StrCutback
Returns the type of the cutback object.
Type
property in object DrawingThread
Returns or sets a CatThreadType (threaded or taped) on a thread.
Type
property in object AnalysisSet
Returns the type of the analysis Set.
Type
property in object HybridShapeDirection
Returns the direction type.
Type
property in object AssemblyHole
Returns or sets the hole type.
Type
property in object Section
Returns or sets the type of the section.
Type
property in object Conflict
Returns the type of the conflict.
Type
property in object ElecSchematicObject
Returns the Electrical Schematic Object's Type (Alternator, Signal, Bundle, Wire, .
Type
property in object BasicComponent
Returns the type of the Basic Component.
Type
property in object AnalysisEntity
Returns the type of the analysis entity.
Type
property in object TreeVizManipSettingAtt
Retrieves or Sets the type applied to the specification tree.
Type
property in object MechanismCommand
Returns the command type.
Type
property in object ABQBoundaryCondition
Returns the type of the boundary condition.
Type
property in object HybridShapePointOnCurve
Returns the distance stored value type.
Type
property in object AnalysisLocalEntity
Returns the type of the analysis Entity.
Type
property in object ArrangementProduct
Returns the Type of the ArrangementProduct in the form of a String.
Type
property in object AnalysisMeshLocalSpecification
Returns the type of the local specification.
Type
property in object ManufacturingPrismaticMachiningArea
Returns or sets the Type of a Manufacturing Prismatic Machining Area.
TypeBaseFrm
property in object ImportD5SettingAtt
Returns or sets the TypeBaseFrm parameter.
TypeCoorsys
property in object ImportD5SettingAtt
Returns or sets the TypeCoorsys parameter.
TypeESSObjectSettingAtt
object
The interface to access a CATIATypeESSObjectSettingAtt.
TypeOfIconOnFunctionalElement
property in object FunctionalSystemSettingAtt
Returns or sets the TypeOfIconOnFunctionalElement parameter.
TypeOfTransfer
property in object HybridShapeTransfer
Returns or sets the type of transfer.
TypeSolution
property in object HybridShapeReflectLine
Returns or sets whether the reflectline curve is or should be created with the normal to the support or the tangent plane to the support.
TypeToolFrm
property in object ImportD5SettingAtt
Returns or sets the TypeToolFrm parameter.
TypeWclPath
property in object ImportD5SettingAtt
Returns or sets the TypeWclPath parameter.
temperatureDependency
property in object ABQFilmCondition
Sets or returns the temperature dependency.
temperatureDependency
property in object ABQThermalConnBehavior
Sets or returns the temperature dependency.
U1
property in object ABQRigidCoupling
Sets or returns the U1 degree of freedom.
U2
property in object ABQRigidCoupling
Sets or returns the U2 degree of freedom.
U3
property in object ABQRigidCoupling
Sets or returns the U3 degree of freedom.
UGActiveLayersOnly
property in object MultiCADSettingAtt
UGDrawingName
property in object MultiCADSettingAtt
UGLayerNumbers
property in object MultiCADSettingAtt
UGOpenSurfaces
property in object MultiCADSettingAtt
UIStyle
property in object GeneralSessionSettingAtt
Returns the user interface style parameter.
UPID
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the user pid field.
UR1
property in object ABQRigidCoupling
Sets or returns the UR1 degree of freedom.
UR1
property in object ABQSmoothCoupling
Returns or sets the UR1 degree of freedom.
UR2
property in object ABQRigidCoupling
Sets or returns the UR2 degree of freedom.
UR2
property in object ABQSmoothCoupling
Returns or sets the UR2 degree of freedom.
UR3
property in object ABQRigidCoupling
Sets or returns the UR3 degree of freedom.
UR3
property in object ABQSmoothCoupling
Returns or sets the UR3 degree of freedom.
UREP
property in object ErrorlogStatisticsSettingAtt
Returns or sets the state ot the user report severity level field.
URL
method in object Noa
Retrieves URL.
URL
method in object FlagNote
Retrieves URL.
USER
property in object GeneralStatisticsSettingAtt
Returns or sets the state ot the user name field.
UTCTimeFormat
property in object CacheSettingAtt
Retrieves or sets the the cache timestamp format.
UgReferenceSet
property in object MultiCADSettingAtt
UnAlignedWithReferenceView
method in object DrawingView
Deactivates the alignment with the reference view.
UnAlignedWithReferenceView
method in object Layout2DView
Deactivates the alignment with the reference view.
UnBreak
method in object DrawingViewGenerativeBehavior
If a view have been broken with lines in order to hide an area of this view, this method undoes this modification of the view, and the other types of view remain.
UnBreakout
method in object DrawingViewGenerativeBehavior
If a view have gone through a breakout view operation, this method removes all the breakout view done on this view, and the other types of view remain.
UnBreakoutNum
method in object DrawingViewGenerativeBehavior
If a view have gone through a breakout view operation, this method removes the specified breakout view done on this view, and the other types of view remain.
UnClip
method in object DrawingViewGenerativeBehavior
If a view have been clipped, this method removes the last clipping view done on this view, and the other types of view remain.
UnLink
method in object SchCntrDocLink
Remove external link to another connector.
UnMergeCells
method in object DrawingTable
Unmerges a group of cells.
UnMountDevice
method in object MountManager
UnSetDevice
method in object MountManager
UnUpdatedConstraintsCount
property in object Constraints
Returns the number of unupdated constraints from the Constraints collection.
UnassignState
method in object DNB3DState
Unclip
method in object DrawingDimension
Unclip the dimension if it is clipped.
UncuredThickness
property in object CompositesMaterial
returns or set the uncured thicknes defined in Composites tab in mm.
UnderFeature
property in object FTAInfraSettingAtt
Returns or sets the Under Geometric Feature Nodes setting parameter value.
UnderSet
property in object FTAInfraSettingAtt
Returns or sets the Under Annotation Set Node setting parameter value.
UnderView
property in object FTAInfraSettingAtt
Returns or sets the Under View/Annotation Plane Nodes setting parameter value.
Underline
property in object DrawingTextProperties
Returns or sets the drawing text font underline property.
UnfoldType
property in object HybridShapeTransfer
Returns or sets the type of unfold to take into account during transfer.
UnfoldedSurface
property in object HybridShapeTransfer
Returns or sets the unfolded surface.
Uninsert
method in object SchComponent
Remove all connections of a component with a route.
Unit
object
Represents CATIAUnit object.
Unit
property in object Dimension
Returns the unit used for this dimension object.
Units
object
Represents the collection of Units.
Units
property in object Parameters
Returns the collection of units.
UnitsSheetSettingAtt
object
The interface to access a CATIAUnitsSheetSettingAtt.
Unlock
method in object FunctionalDescription
Unlock.
UnlockActivitesWithinProgram
method in object ManufacturingProgram
UnlockActivty
method in object ManufacturingOperation
UnmountActivity
object
Interface representing a Unmount Activity.
UnresolvedText
property in object WIText
UnsetArrow
method in object SchArrowDisplay
Remove arrow display attributes on the route.
UnsetClosingPoint
method in object HybridShapeBlend
Unsets the closing point of a closed curve of the blend.
UnsetCurvature
method in object ControlPoint2D
UnsetGap
method in object SchGapDisplay
Remove gap display attributes on the route.
UnsetGeometryOnSupport
method in object HybridShapeCircleCtrPt
Inactivates GeometryOnSupport of circle.
UnsetGeometryOnSupport
method in object HybridShapeCircleCtrRad
Inactivates GeometryOnSupport of circle.
UnsetGeometryOnSupport
method in object HybridShapeCircle2PointsRad
Inactivates GeometryOnSupport of circle.
UnsetLowerLimit1
method in object Joint
Unsets the lower limit of the joint, for the first parameter.
UnsetLowerLimit2
method in object Joint
Unsets the lower limit of the joint, for the second parameter.
UnsetSupport
method in object HybridShapeBlend
Unsets a support from the blend.
UnsetTangent
method in object ControlPoint2D
UnsetUpperLimit1
method in object Joint
Unsets the upper limit of the joint, for the first parameter.
UnsetUpperLimit2
method in object Joint
Unsets the upper limit of the joint, for the second parameter.
Update
method in object Viewer
Updates the viewer's contents.
Update
method in object Part
Updates of the part result with respect to its specifications.
Update
method in object Marker3D
Updates the the marker 3D: that is to take into account all modifications which occur since last update.
Update
method in object DrawingRoot
Updates all the drawing sheets of the drawing document.
Update
method in object DrawingSheet
Updates the drawing views of the drawing sheet.
Update
method in object Mechanism
Reassembles the mechanism after dimension changes in the parts.
Update
method in object AnnotatedView
Updates the annotated view: that is to take into account all modifications which occur since last update.
Update
method in object DrawingDocument
Updates all the drawing sheets of the drawing document.
Update
method in object AnalysisSet
Launch the update (computation if needed) of an AnalysisSet.
Update
method in object WalkActivity
This method is the key-method to create children-MoveToPostures for a created Walk.
Update
method in object AnalysisImage
Updates an image.
Update
method in object AnalysisSensor
Update the sensor.
Update
method in object Product
Updates the product.
Update
method in object DrawingTextProperties
Update the properties of the drawing text.
Update
method in object DrawingViewGenerativeBehavior
Updates the drawing view.
UpdateAllInstancesFromReference
method in object SchUpdateInstances
Update all the instances of a given local reference in a document.
UpdateAnalysisInSimulation
property in object HtsGeneralSettingAtt
Returns or sets the UpdateAnalysisInSimulation parameter.
UpdateBoundedElements
method in object SchZone
Update the zone members based on the current zone boundaries.
UpdateBundleSmoothness
method in object EHSUpdateSmoothnessFactor
Sets Smoothness Factor for Bundle segment.
UpdateElementsRefreshed
property in object PartInfrastructureSettingAtt
Returns or sets the "UpdateElementsRefreshed" parameter.
UpdateLinkedExternalReferences
property in object PartInfrastructureSettingAtt
Returns or sets the "UpdateLinkedExternalReferences" parameter.
UpdateMode
property in object PartInfrastructureSettingAtt
Returns or sets the "UpdateMode" parameter.
UpdateObject
method in object Part
Updates an object with respect to its specifications.
UpdateResult
property in object SectioningSettingAtt
Returns or sets the UpdateResult parameter.
UpdateStatusMode
property in object AsmGeneralSettingAtt
Returns or sets the update status computation setting parameter.
UpdateStoppedOnError
property in object PartInfrastructureSettingAtt
Returns or sets the "UpdateStoppedOnError" parameter.
UpdateZoneMembership
method in object SchZoneMembership
Check all zones geometric boundaries and put this element into the correct zone membership lists.
UpgradeToFull
method in object Scene
Create a ProductScene in Full mode from the current Scene.
UpgradeToPartial
method in object Scene
Create a ProductScene in Partial mode from the current Scene.
UploadFromXML
method in object OLPTranslator
UploadRobotProgram
method in object OLPTranslator
Creates robot or device tasks in V5 based from native robot language program file or an OLP XML file.
Uploader
property in object IgpOlpSettingAtt
Returns or sets value of OLP Parser parameter.
UploaderDir
property in object IgpOlpSettingAtt
Returns or sets value of OLP Parser Directory parameter.
UpperLimit1
property in object Joint
Gets or returns the upper limit of the joint, for the first parameter.
UpperLimit2
property in object Joint
Gets or returns the upper limit of the joint, for the second parameter.
UsageLimit
property in object MemoryWarningSettingAtt
Returns or sets the alert percentage.
Use3DAccuracy
property in object PageSetup
Returns or sets Use3DAccuracy option for print.
UseAmplitude
property in object ABQLoad
UseAmplitude
property in object ABQTemperatureHistory
Sets or returns the UseAmplitude flag.
UseGraphicalUI
property in object StiEngine
Returns (gets) or sets the use of Graphical User Interface (GUI) in order to display or not panels.
UseImageSize
property in object PageSetup
Returns or sets the paper size to the image size.
UseInterferenceFitAmplitude
property in object ABQSurfaceToSurfaceContact
UseMasterNegativeSide
property in object ABQSurfaceToSurfaceContact
Returns the activation status if the master surface is specified as the negative side.
UseMaxEvalsWoImprovement
property in object Optimization
Returns or sets if the number of updates without improvement of the solution has to be used as a termination criterion.
UseMaxTime
property in object Optimization
Returns or sets if max time has to be used as a termination criterion.
UseSketchAxisAsDefault
method in object HybridShapeSweepExplicit
Uses Sketch Axis As Default.
UseSlaveNegativeSide
property in object ABQSurfaceToSurfaceContact
Returns the activation status if the slave surface is specified as the negative side.
UseStopDialog
method in object SetOfEquation
Specifies whether the 'Stop Dialog' should be shown during calculations.
UseStyleCreateObjects
property in object DraftingSettingAtt
Returns the UseStyleCreateObjects parameter.
UseSymbolcTransformations
method in object SetOfEquation
Specifies whether the Gauss method should be used during the symbolic transformation.
UselocalCsys
property in object ABQGravity
Sets or returns a boolean indicating whether local coordinate system is used in Gravity load.
UselocalCsys
property in object ABQDisplacementBC
UselocalCsys
property in object ABQConcentratedForce
UserAccessMode
property in object Parameter
Returns the user access mode of the parameter.
UserDefinedTimeIncrementValue
property in object ABQExplicitDynamicsStep
Sets or returns the user-defined time increment value.
UserPattern
object
Represents the user pattern.
UserRefProperties
property in object Product
Returns the collection object containing the product properties.
UserRepartition
object
Represents the User Pattern repartition.
UserSpeed
property in object WalkActivity
UserSpeed
property in object HumanActivityGroup
UserSubroutine
property in object ABQJob
Sets or returns the user subroutine file path.
UserSurface
object
UserSurfaces
object
UserSurfaces
property in object Part
Returns the collection object containing the user surfaces.
UserTime
property in object WalkActivity
UserTime
property in object HumanActivityGroup
UserType
property in object SWKIKConstraint
Returns the user type of the constraint.
UserWalkSpeedStatus
property in object HtsGeneralSettingAtt
Returns or sets the UserWalkSpeedStatus parameter.
u1
property in object ABQDisplacementBC
ets or returns the first translational component.
u2
property in object ABQDisplacementBC
ets or returns the second translational component.
u3
property in object ABQDisplacementBC
ets or returns the third translational component.
ur1
property in object ABQDisplacementBC
ets or returns the first rotational component.
ur2
property in object ABQDisplacementBC
ets or returns the second rotational component.
ur3
property in object ABQDisplacementBC
ets or returns the third rotational component.
V4DocumentModel
property in object V4MasterModel
Returns the V4 Document that contains the Master's Model.
V4MasterModel
object
Represents the V4 Master Model.
V4V5SpaceSettingAtt
object
Represents the object to handle the setting parameters of the "V4V5 Space" tab page.
V4V5_FDT
property in object CGRAdhesionSettingAtt
Retrieves the V4V5_FDT container activation state.
V4WritingSettingAtt
object
Represents the Saving As V4 Data setting controller object.
V4_Model_CommentPage
property in object CGRAdhesionSettingAtt
Retrieves the V4_Model_CommentPage container activation state.
V4_Model_LnF
property in object CGRAdhesionSettingAtt
Retrieves the V4_Model_LnF container activation state.
V4_Part_Definition
property in object MigrBatchSettingAtt
Retrieves or sets the state of the "V4 Part Definition" setting parameter.
V5_SPA
property in object CGRAdhesionSettingAtt
Retrieves the V5_SPA container activation state.
ValidConnectorTypes
property in object PspConnectable
Returns a list of Valid connector types on this object.
Validity
property in object ExpertReportObject
Returns the validity of a check for a given tuple.
ValuateFromString
method in object Parameter
Valuates a parameter using a string as input.
Valuation
property in object Publication
Returns published object.
Value
property in object SelectedElement
Returns the actual selected automation object.
Value
property in object ToleranceZone
Retrieves tolerance zone value (in millimeters).
Value
property in object IntParam
Returns or sets the value of the integer parameter.
Value
property in object StrParam
Returns or sets the string parameter value.
Value
property in object Relation
Returns the definition of the relation.
Value
property in object RealParam
Returns or sets the value of the real parameter.
Value
property in object BoolParam
Returns or sets the value of the boolean parameter.
Value
property in object DrawingDimValue
Returns value of dimension.
Value
property in object CompositeTolerance
Retrieves value (in millimeters).
Value
property in object Distance
Returns the distance value.
Value
property in object Conflict
Returns the conflict value.
Value
property in object TolerancePerUnitBasisRestrictiveValue
Retrieves value (in millimeters).
ValueAngle
property in object DrawingDimension
Returns or sets angle of dimension value.
ValueAsString
method in object Parameter
Returns the value of the parameter as a string.
ValueAsString2
method in object Dimension
Gets the value of the parameter as a string, with a given precision.
ValueAutoMode
property in object DrawingDimension
Returns or sets auto mode of dimension value or not.
ValueDisplay
property in object DrawingDimension
Returns or sets display of dimension value state.
ValueEnum
property in object EnumParam
Returns or sets the value of the EnumParameter object.
ValueFrame
property in object DrawingDimension
Returns or sets frame type of dimension value.
ValueFramedElement
property in object DrawingDimValue
Get dimension framed element.
ValueFramedGroup
property in object DrawingDimValue
Returns or sets dimension framed group.
ValueInOut
property in object DrawingDimension
Returns or sets in/out mode of dimension value or not.
ValueList
property in object ListParameter
Returns or sets the value of the List object.
ValueOrientation
property in object DrawingDimension
Returns or sets orientation of dimension value.
ValueReference
property in object DrawingDimension
Returns or sets reference of dimension value.
Values
method in object ToleranceUnitBasisValue
Retrieves tolerance unit basis values (in millimeters).
VarRadEdgeFillet
object
Represents the edge fillet shape with a variable radius.
Variable
property in object ABQMassScaling
Sets or returns whether the mass scaling is variable.
Variables
property in object ExpertRule
Returns or sets the variables scope of the a Rule.
Variables
property in object ExpertCheck
Returns or sets the variable scope of an Expert Check.
Variants
property in object FunctionalDescription
Get the Variants collection.
Vector
property in object Shuttle
Returns/Stores the validation vector attribute.
Vector
property in object FittingSettingAtt
VectorType
property in object HybridShapeTranslate
Returns or sets the way the translation vector is defined.
VelocityColor
property in object DevAnalysisSettingAtt
Returns or sets the VelocityColor parameter.
VelocityLimit
property in object DevAnalysisSettingAtt
Returns or sets the VelocityLimit parameter.
VerifTabSettingAtt
object
Version
property in object SystemConfiguration
Returns the CATIA version number (usually version 5).
Vertex
object
0-D boundary.
VerticalReference
property in object Axis2D
Returns the 2D coordinate system vertical axis.
VibrationVolumeShapeName
method in object VibrationVolumes
Returns the name of the associated shape.
VibrationVolumes
object
VideoResult
property in object ManufacturingActivity
Retreive the video result path of a Manufacturing Activity.
View
method in object NavigatorWorkbench
Applies the annotated view to the current viewer.
ViewAnalysisParameter
property in object AnalysisGeneralSettingAtt
Retrieves if the Parameter set is visible in the feature tree of the analysis document.
ViewAnalysisRelation
property in object AnalysisGeneralSettingAtt
Retrieves if the Relation set is visible in the feature tree of the analysis document.
ViewAssociativity
property in object FTAInfraSettingAtt
Returns or sets the View Associativity setting parameter value.
ViewBackgroundMode
property in object Layout2DSettingAtt
Returns the ViewBackgroundMode parameter.
ViewCharacteristicCurvesSettingAtt
object
Represents the CATIA Sheet Metal Aerospace Display setting controller object.
ViewFilterCreationMode
property in object Layout2DSettingAtt
Returns the ViewFilterCreationMode parameter.
ViewPoint
property in object Capture
Retrieves the ViewPoint state, saved or Not.
ViewProfile
property in object FTAInfraSettingAtt
Returns or sets the View Profile setting parameter value.
ViewReferential
property in object FTAInfraSettingAtt
Returns or sets the View Referential setting parameter value.
ViewReferentialZoomable
property in object FTAInfraSettingAtt
Returns or sets the View Referential Zoomable setting parameter value.
ViewScale
property in object Layout2DView
Returns or sets the scale of the Layout2D view.
ViewType
property in object DrawingView
Returns the drawing view type.
Viewer
object
Represents the viewer.
Viewer2D
object
Represents a 2D viewer.
Viewer3D
object
Represents a 3D viewer.
ViewerAutoOpen
property in object SectioningSettingAtt
Returns or sets the ViewerAutoOpen parameter.
ViewerAutoReframe
property in object SectioningSettingAtt
Returns or sets the ViewerAutoReframe parameter.
ViewerLock2D
property in object SectioningSettingAtt
Returns or sets the ViewerLock2D parameter.
Viewers
object
A collection of all the Viewer objects currently attached to a window.
Viewers
property in object Window
Returns the collection of viewers attached to the window.
Viewpoint2D
object
Represents the 2D viewpoint.
Viewpoint2D
property in object Camera2D
Returns or sets the 2D viewpoint of a 2D camera.
Viewpoint2D
property in object Viewer2D
Returns or sets the 2D viewpoint of a 2D viewer.
Viewpoint3D
object
Represents the 3D viewpoint.
Viewpoint3D
property in object Camera3D
Returns or sets the 3D viewpoint of a 3D camera.
Viewpoint3D
property in object Viewer3D
Returns or sets the 3D viewpoint of a 3D viewer.
ViewpointAnimationMode
property in object VisualizationSettingAtt
Returns the ViewpointAnimationMode parameter.
Views
property in object DrawingSheet
Returns the drawing view collection of the drawing sheet.
Views
property in object Layout2DSheet
Returns the Layout2D view collection of the Layout2D sheet.
VisBaseFrm
property in object ImportD5SettingAtt
Returns or sets the VisBaseFrm parameter.
VisCoorsys
property in object ImportD5SettingAtt
Returns or sets the VisCoorsys parameter.
VisProperties
property in object Selection
Manages graphic properties on current selection.
VisPropertySet
object
Represents the graphic properties for the current selection.
VisToolFrm
property in object ImportD5SettingAtt
Returns or sets the VisToolFrm parameter.
VisWclPath
property in object ImportD5SettingAtt
Returns or sets the VisWclPath parameter.
Visibility
property in object TCPTrace
Manage the visibility of the trace.
Visible
property in object Application
Returns or sets the application's window visibility.
VisibleInMfgView
property in object ManufacturingMachinableArea
Returns the manufacturing machinable area visibility state.
Vision
property in object SWKManikin
Returns the vision of the current manikin.
Visu2DMode
property in object Layout2DView
Sets/Gets the 2D mode for background visualization of the view.
VisuBackground
property in object Layout2DView
Sets/Gets the 2D-3D background visu mode of the view ie in the 3D windows and in the background of each view in every 2D context.
VisuFormatUnit
property in object MultiCADSettingAtt
VisuIn3D
property in object Layout2DView
Sets/Gets the 3D visualization mode of the view in the 3D Viewer ie in the 3D windows and in the background of each view in every 2D context.
VisuIn3D
property in object Layout2DRoot
Set/Get the 3D visualization mode of the layout in the 3D Viewer ie in the 3D windows and in the background of each view in every 2D context.
VisuIn3D
property in object Layout2DSheet
Set/Get the 3D visualization mode of the sheet in the 3D Viewer ie in the 3D windows and in the background of each view in every 2D context.
VisuMode
property in object ArrangementRun
Returns or sets the Visualization Mode for an ArrangementRun object.
VisuMode
property in object ArrangementArea
Returns or sets the Visualization Mode for an ArrangementArea object.
VisuMode
property in object ArrangementPathway
Returns or sets the Visualization Mode for an ArrangementPathway object.
VisuMode
property in object ArrangementBoundary
Returns or sets the Visualization Mode for an ArrangementBoundary object.
VisuMode
property in object ArrangementItemReservation
Returns or set the Visualization Mode for the ArrangementItemReservation.
Visu_Mode_2D
property in object MigrBatchSettingAtt
Retrieves or sets the state of the "Projection of Space for transparent views" setting parameter.
VisualizationMode
property in object AnalysisSettingAtt
Returns or sets the VisualizationMode parameter.
VisualizationSettingAtt
object
The interface to access a CATIAVisualizationSettingAtt.
Viz2DAccuracyMode
property in object VisualizationSettingAtt
Returns the 2DAccuracyMode parameter.
Viz2DFixedAccuracy
property in object VisualizationSettingAtt
Returns the 2DFixedAccuracy parameter.
Viz2DProportionnalAccuracy
property in object VisualizationSettingAtt
Returns the 2DProportionnalAccuracy parameter.
Viz3DAccuracyMode
property in object VisualizationSettingAtt
Returns the Viz3DAccuracyMode parameter.
Viz3DCurveAccuracy
property in object VisualizationSettingAtt
Returns the 3DCurveAccuracy parameter.
Viz3DFixedAccuracy
property in object VisualizationSettingAtt
Returns the 3DFixedAccuracy parameter.
Viz3DProportionnalAccuracy
property in object VisualizationSettingAtt
Returns the Viz3DProportionnalAccuracy parameter.
VolatileCopy
method in object ExpertRuleBase
Copy the persistent rulebase in a unpersistent unchangeable rulebase.
Volume
property in object FreeSpace
Returns the volume.
Volume
property in object Measurable
Returns the volume.
Volume
property in object Analyze
Returns the product volume value.
VolumeResult
property in object HybridShapeSplit
Returns or sets the Result Type.
VolumeResult
property in object HybridShapeRotate
Returns or sets the volume result.
VolumeResult
property in object HybridShapeScaling
Returns or sets the volume result.
VolumeResult
property in object HybridShapeAffinity
Returns or sets the volume result.
VolumeResult
property in object HybridShapeSymmetry
Returns or sets the volume result.
VolumeResult
property in object HybridShapeTranslate
Returns or sets the volume result.
VolumeResult
property in object HybridShapeAxisToAxis
Returns or sets the volume result.
VoxelStaticAnl
property in object AnalysisSettingAtt
Returns or sets the VoxelStaticAnl parameter.
Voxels
property in object CGRAdhesionSettingAtt
Retrieves the Voxels container activation state.
VrmlSettingAtt
object
The interface to access a CATIAVrmlSettingAtt.
WARN
property in object ErrorlogStatisticsSettingAtt
Returns or sets the state ot the warning severity level field.
WIBuyOff
object
WIChangeNotification
object
WIDataCollection
object
WIText
object
WITextAccessEI
object
WKBN
property in object ErrorlogStatisticsSettingAtt
Returns or sets the state ot the workbench name field.
WalkActColor
property in object HtsTaskDisplaySettingAtt
Returns or sets the WalkActColor parameter.
WalkActLineType
property in object HtsTaskDisplaySettingAtt
Returns or sets the WalkActLineType parameter.
WalkActLineWeight
property in object HtsTaskDisplaySettingAtt
Returns or sets the WalkActLineWeight parameter.
WalkActivity
object
WalkForwardAngle
property in object HtsGeneralSettingAtt
Returns or sets the WalkForwardAngle parameter.
WalkForwardDistance
property in object HtsGeneralSettingAtt
Returns or sets the WalkForwardDistance parameter.
WalkLength
property in object WalkActivity
WeldingSide
property in object DrawingWelding
Returns or sets the welding side of the drawing welding symbol.
WeldingTail
property in object DrawingWelding
Returns or sets the welding tail of the drawing welding symbol.
Weldings
property in object DrawingView
Returns the drawing welding collection of the drawing view.
Weldings
property in object Layout2DView
Returns the drawing welding collection of the Layout2D view.
WetArea
property in object Analyze
Returns the product wet area (outer volume).
WhiteVectorsInBlack
property in object PageSetup
Returns or sets the white vectors in black option.
Width
property in object Viewer
Returns the viewer's width, in pixels.
Width
property in object Window
Returns or sets the window width.
Width
property in object Application
Returns or sets the width of the application's frame window.
Width
property in object Section
Returns or sets the width of the section.
Width
property in object RenderingEnvironment
Returns or sets the cubic environment width value.
Width
property in object FunctNodeGraphLayout
Returns the Width coordinate.
Window
object
Represents the window.
WindowDefaultHeight
property in object SectioningSettingAtt
WindowDefaultWidth
property in object SectioningSettingAtt
WindowOpenMode
property in object SectioningSettingAtt
WindowState
property in object Window
Returns or sets the window state.
Windows
object
A collection of all the Window objects currently managed by the application.
Windows
property in object Application
Returns the collection of windows currently managed by the application.
WireColor
property in object EHMInsertionActPlugMapViewData
Gets Wire Color.
WireDiameter
property in object EHMInsertionActPlugMapViewData
Gets Wire Diameter.
WireID
property in object EHMInsertionActPlugMapViewData
Sets the index of wire.
WireLength
property in object EHMInsertionActPlugMapViewData
Gets Wire Length.
WireName
property in object EHMInsertionActPlugMapViewData
Gets Wire Name.
WirePartNumber
property in object EHMInsertionActPlugMapViewData
Gets Wire Part Number.
WireRefDesignator
property in object EHMInsertionActPlugMapViewData
Gets Wire Reference Designator.
WireSeparationCode
property in object EHMInsertionActPlugMapViewData
Gets Wire Separation Code.
WireSignalID
property in object EHMInsertionActPlugMapViewData
Gets Wire Signal ID.
WireSubType
property in object EHMInsertionActPlugMapViewData
Gets Wire Sub Type.
WireToDevelop
property in object HybridShapeDevelop
Returns or sets the 2D wire to be developed.
WireType
property in object EHMInsertionActPlugMapViewData
Gets Wire Type.
WithdrawEdgeToFillet
method in object VarRadEdgeFillet
Withdraws an edge from the variable radius edge fillet.
WithdrawEdgeToKeep
method in object EdgeFillet
Withdraws an edge from those kept by a filleting operation.
WithdrawElementToChamfer
method in object Chamfer
Withdraws a geometrical element from those to be chamfered.
WithdrawFaceToKeep
method in object Trim
Withdraws an existing Kept face (if face is not divided by operation) .
WithdrawFaceToKeep2
method in object Trim
Withdraws an existing Kept face (if face is divided by operation).
WithdrawFaceToRemove
method in object Trim
Withdraws an existing Removed face (if face not divided by operation).
WithdrawFaceToRemove
method in object Shell
Withdraws an existing face from those to be removed by the shell process.
WithdrawFaceToRemove2
method in object Trim
Withdraws an existing Removed face (if face is divided by operation).
WithdrawFaceToThicken
method in object Thickness
Withdraws an existing thickened face.
WithdrawImposedVertex
method in object VarRadEdgeFillet
Withdraws a control couple.
WithdrawObjectToFillet
method in object ConstRadEdgeFillet
Withdraws a sub-element from those to be filleted.
WorkGeneralSettingAtt
object
Interface representing xxx.
WorkInstructions
property in object Export3DXmlSettingAtt
Returns or sets the Work Instructions activation flag.
WorkScenes
property in object SceneWorkbench
Returns the Scenes collection.
Workbench
object
Represents a workbench on a document.
WorkbenchStatisticsSettingAtt
object
Interface for Workbench statistic Controler.
WorkerActivity
object
The object that represents an Worker activity.
WorkerResource
property in object HumanTask
Returns the Worker-Resource associated with this worker-activity.
WorkerResource
property in object WorkerActivity
Returns the Worker-Resource associated with this worker-activity.
Wrapping
object
WrappingShapeName
method in object Wrappings
Returns the name of the associated shape.
WrappingWidth
property in object DrawingText
Returns or sets the wrapping width of the drawing text.
Wrappings
object
Wrappings
property in object OptimizerWorkBench
Returns Wrappings.
Write
method in object TextStream
Writes a string in the text stream.
WriteInputFile
method in object ABQJob
Writes the input file for the job.
width
property in object DrawingPicture
Returns or sets the width of the drawing picture.
write_Chars
method in object ManufacturingOutput
Write the specified string to the underlying output stream.
write_Double
method in object ManufacturingOutput
Write the specified double to the underlying output stream.
write_Long
method in object ManufacturingOutput
Write the specified long to the underlying output stream.
X
property in object HybridShapePointCoord
Returns X coordinate of the point.
X
property in object FunctionalPosition
Returns the X coordinate.
XAxisDirection
property in object AxisSystem
Reads or sets the geometric point, line or plane which defines the direction of the X axis.
XAxisType
property in object AxisSystem
Reads or sets the way the X axis is specified.
XLength
property in object ArrangementRectangle
Returns or sets the XLength of the ArrangementRectangle.
XLength
property in object ArrangementItemReservation
Returns or sets the XLength of the ArrangementItemReservation.
XMLDir
property in object IgpOlpSettingAtt
Returns or sets value of OLP XML Directory parameter.
XMLName
property in object AnalysisLocalSensor
Returns or sets the Identifier of the sensor as defined in the XML file.
XMLSchema
property in object IgpOlpSettingAtt
Returns or sets value of OLP XML Schema parameter.
XOffset
property in object HybridShapePointOnPlane
Returns the X cartesian coordinate in the plane.
XRatios
property in object HybridShapeAffinity
Returns the affinity ratio along the X Direction of the reference coordinate system.
x
property in object DrawingView
For an interactive view, get_x and put_x methods are equivalents to get_xAxisData, put_xAxisData In a generative case, get_x.
x
property in object DrawingText
Returns or sets the x coordinate of the text.
x
property in object DrawingTable
Returns or sets the x coordinate of the table.
x
property in object DrawingWelding
Returns or sets the x coordinate of the drawing welding.
x
property in object DrawingPicture
Returns or sets the x coordinate of the drawing picture position.
x
property in object Layout2DView
Returns or sets the x coordinate of the Layout2D view coordinate system origin.
x
property in object DrawingComponent
Returns or sets the x coordinate of the drawing component instance position.
xAxisData
property in object DrawingView
Returns or sets the x coordinate of the drawing view coordinate system origin.
Y
property in object HybridShapePointCoord
Returns Y coordinate of the point.
Y
property in object FunctionalPosition
Returns the Y coordinate.
YAxisDirection
property in object AxisSystem
Reads or sets the geometric point, line or plane which defines the direction of the Y axis.
YAxisType
property in object AxisSystem
Reads or sets the way the Y axis is specified.
YLength
property in object ArrangementRectangle
Returns or sets the YLength of the ArrangementRectangle.
YLength
property in object ArrangementItemReservation
Returns or sets the YLength of the ArrangementItemReservation.
YOffset
property in object HybridShapePointOnPlane
Returns the Y cartesian coordinate in the plane.
YRatios
property in object HybridShapeAffinity
Returns the affinity ratio along the Y Direction of the reference coordinate system.
y
property in object DrawingView
For an interactive view, get_y and put_y methods are equivalents to get_yAxisData, put_yAxisData In a generative case, get_y.
y
property in object DrawingText
Returns or sets the y coordinate of the text.
y
property in object DrawingTable
Returns or sets the y coordinate of the table.
y
property in object DrawingWelding
Returns or sets the y coordinate of the drawing welding.
y
property in object DrawingPicture
Returns or sets the y coordinate of the drawing picture position.
y
property in object Layout2DView
Returns or sets the y coordinate of the Layout2D view coordinate system origin.
y
property in object DrawingComponent
Returns or sets the y coordinate of the drawing component instance position.
yAxisData
property in object DrawingView
Returns or sets the y coordinate of the drawing view coordinate system origin.
Z
property in object Annotation
Z
property in object HybridShapePointCoord
Returns Z coordinate of the point.
ZAxisDirection
property in object AxisSystem
Reads or sets the geometric point, line or plane which defines the direction of the Z axis.
ZAxisType
property in object AxisSystem
Reads or sets the way the Z axis is specified.
ZRatios
property in object HybridShapeAffinity
Returns the affinity ratio along the Z Direction of the reference coordinate system.
ZeroDimFeatVertexOrWireBoundaryMonoDimFeatVertex
object
0-D boundary beeing either an isolated point or the extremity of a feature whose topological result is one dimensional.
Zoom
property in object PageSetup
Returns or sets the zoom factor to use when printing.
Zoom
property in object Viewpoint2D
Returns or sets the zoom factor associated with the viewpoint.
Zoom
property in object Viewpoint3D
Returns or sets the zoom factor associated with the viewpoint.
Zoom
property in object AnnotatedView
Returns the zoom factor associated with the annotated view.
ZoomIn
method in object Viewer
Zooms in the viewer's contents.
ZoomOut
method in object Viewer
Zooms out the viewer's contents.
Copyright © 2003, Dassault Systèmes. All rights reserved.