All Frameworks  Object Hierarchy  This Framework  Indexes

PartInfrastructureSettingAtt (Object)

Setting controller for all the Part Infrastructure property tab pages.
Role: This interface is implemented by a component representing the controller for the Part Infrastructure settings.

Property Index

AlsoDeleteExclusiveParents
Returns or sets the "AlsoDeleteExclusiveParents" parameter.
AxisSystemSize
Returns or sets the "AxisSystemSize" parameter.
BodiesUnderOperationsInTree
Returns or sets the "BodiesUnderOperationsInTree" parameter.
ColorSynchronizationEditability
Returns or sets the "ColorSynchronizationEditability" parameter.
ColorSynchronizationMode
Returns or sets the "ColorSynchronizationMode" parameter.
ConstraintsInGeometry
Returns or sets the "ConstraintsInGeometry" parameter.
ConstraintsNodeInTree
Returns or sets the "ConstraintsNodeInTree" parameter.
ContextualFeaturesSelectableAtCreation
Returns or sets the "ContextualFeaturesSelectableAtCreation" parameter.
DeleteWarningBox
Returns or sets the "DeleteWarningBox" parameter.
DisplayGeometryAfterCurrent
Returns or sets the "DisplayGeometryAfterCurrent" parameter.
ExpandSketchBasedFeaturesNodeAtCreation
Returns or sets the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
ExternalReferencesAsVisible
Returns or sets the "ExternalReferencesAsVisible" parameter.
ExternalReferencesAssemblyRootContext
Returns or sets the "ExternalReferencesAssemblyRootContext" parameter.
ExternalReferencesNodeInTree
Returns or sets the "ExternalReferencesNodeInTree" parameter.
HybridDesignMode
Returns or sets the "HybridDesignMode" parameter.
KnowledgeInHybridDesignMode
Returns or sets the "KnowledgeInHybridDesignMode" parameter.
LinkedExternalReferencesOnlyOnPublication
Returns or sets the "LinkedExternalReferencesOnlyOnPublication" parameter.
LinkedExternalReferencesWarningAtCreation
Returns or sets the "LinkedExternalReferencesWarningAtCreation" parameter.
LinkedExternalReferences
Returns or sets the "LinkedExternalReferences" parameter.
NamingMode
Returns or sets the "NamingMode" parameter.
NewWith3DSupport
Returns or sets the "NewWith3DSupport" parameter.
NewWithAxisSystem
Returns or sets the "NewWithAxisSystem" parameter.
NewWithGS
Returns or sets the "NewWithGS" parameter.
NewWithOGS
Returns or sets the "NewWithOGS" parameter.
NewWithPanel
Returns or sets the "NewWithPanel" parameter.
OnlyCurrentOperatedSolidSetInGeometry
Returns or sets the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
OnlyCurrentSolidSetInGeometry
Returns or sets the "OnlyCurrentSolidSetInGeometry" parameter.
ParametersNodeInTree
Returns or sets the "ParametersNodeInTree" parameter.
PublishTopologicalElements
Returns or sets the "PublishTopologicalElements" parameter.
RelationsNodeInTree
Returns or sets the "RelationsNodeInTree" parameter.
ReplaceOnlyAfterCurrent
Returns or sets the "ReplaceOnlyAfterCurrent" parameter.
SurfaceElementsLocation
Returns or sets the "SurfaceElementsLocation" parameter.
TrueColorMode
Returns or sets the "ColorInheritanceMode" parameter.
UpdateElementsRefreshed
Returns or sets the "UpdateElementsRefreshed" parameter.
UpdateLinkedExternalReferences
Returns or sets the "UpdateLinkedExternalReferences" parameter.
UpdateMode
Returns or sets the "UpdateMode" parameter.
UpdateStoppedOnError
Returns or sets the "UpdateStoppedOnError" parameter.

Method Index

GetAlsoDeleteExclusiveParentsInfo
Retrieves environment informations for the "AlsoDeleteExclusiveParents" parameter.
GetAxisSystemSizeInfo
Retrieves environment informations for the "AxisSystemSize" parameter.
GetBodiesUnderOperationsInTreeInfo
Retrieves environment informations for the "BodiesUnderOperationsInTree" parameter.
GetColorSynchronizationEditabilityInfo
Retrieves environment informations for the "ColorSynchronizationEditability" parameter.
GetColorSynchronizationModeInfo
Retrieves environment informations for the "ColorSynchronizationMode" parameter.
GetConstraintsInGeometryInfo
Retrieves environment informations for the "ConstraintsInGeometry" parameter.
GetConstraintsNodeInTreeInfo
Retrieves environment informations for the "ConstraintsNodeInTree" parameter.
GetContextualFeaturesSelectableAtCreationInfo
Retrieves environment informations for the "ContextualFeaturesSelectableAtCreation" parameter.
GetDeleteWarningBoxInfo
Retrieves environment informations for the "DeleteWarningBox" parameter.
GetDisplayGeometryAfterCurrentInfo
Retrieves environment informations for the "DisplayGeometryAfterCurrent" parameter.
GetExpandSketchBasedFeaturesNodeAtCreationInfo
Retrieves environment informations for the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
GetExternalReferencesAsVisibleInfo
Retrieves environment informations for the "ExternalReferencesAsVisible" parameter.
GetExternalReferencesAssemblyRootContextInfo
Retrieves environment informations for the "ExternalReferencesAssemblyRootContext" parameter.
GetExternalReferencesNodeInTreeInfo
Retrieves environment informations for the "ExternalReferencesNodeInTree" parameter.
GetHybridDesignModeInfo
Retrieves environment informations for the "HybridDesignMode" parameter.
GetKnowledgeInHybridDesignModeInfo
Retrieves environment informations for the "KnowledgeInHybridDesignMode" parameter.
GetLinkedExternalReferencesInfo
Retrieves environment informations for the "LinkedExternalReferences" parameter.
GetLinkedExternalReferencesOnlyOnPublicationInfo
Retrieves environment informations for the "LinkedExternalReferencesOnlyOnPublication" parameter.
GetLinkedExternalReferencesWarningAtCreationInfo
Retrieves environment informations for the "LinkedExternalReferencesWarningAtCreation" parameter.
GetNamingModeInfo
Retrieves environment informations for the "NamingMode" parameter.
GetNewWith3DSupportInfo
Retrieves environment informations for the "NewWith3DSupport" parameter.
GetNewWithAxisSystemInfo
Retrieves environment informations for the "NewWithAxisSystem" parameter.
GetNewWithGSInfo
Retrieves environment informations for the "NewWithGS" parameter.
GetNewWithOGSInfo
Retrieves environment informations for the "NewWithOGS" parameter.
GetNewWithPanelInfo
Retrieves environment informations for the "NewWithPanel" parameter.
GetOnlyCurrentOperatedSolidSetInGeometryInfo
Retrieves environment informations for the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
GetOnlyCurrentSolidSetInGeometryInfo
Retrieves environment informations for the "OnlyCurrentSolidSetInGeometry" parameter.
GetParametersNodeInTreeInfo
Retrieves environment informations for the "ParametersNodeInTree" parameter.
GetPublishTopologicalElementsInfo
Retrieves environment informations for the "PublishTopologicalElements" parameter.
GetRelationsNodeInTreeInfo
Retrieves environment informations for the "RelationsNodeInTree" parameter.
GetReplaceOnlyAfterCurrentInfo
Retrieves environment informations for the "ReplaceOnlyAfterCurrent" parameter.
GetSurfaceElementsLocationInfo
Retrieves environment informations for the "SurfaceElementsLocation" parameter.
GetTrueColorModeInfo
Retrieves environment informations for the "ColorInheritanceMode" parameter.
GetUpdateElementsRefreshedInfo
Retrieves environment informations for the "UpdateElementsRefreshed" parameter.
GetUpdateLinkedExternalReferencesInfo
Retrieves environment informations for the "UpdateLinkedExternalReferences" parameter.
GetUpdateModeInfo
Retrieves environment informations for the "UpdateMode" parameter.
GetUpdateStoppedOnErrorInfo
Retrieves environment informations for the "UpdateStoppedOnError" parameter.
SetAlsoDeleteExclusiveParentsLock
Locks or unlocks the "AlsoDeleteExclusiveParents" parameter.
SetAxisSystemSizeLock
Locks or unlocks the "AxisSystemSize" parameter.
SetBodiesUnderOperationsInTreeLock
Locks or unlocks the "BodiesUnderOperationsInTree" parameter.
SetColorSynchronizationEditabilityLock
Locks or unlocks the "ColorSynchronizationEditability" parameter.
SetColorSynchronizationModeLock
Locks or unlocks the "ColorSynchronizationMode" parameter.
SetConstraintsInGeometryLock
Locks or unlocks the "ConstraintsInGeometry" parameter.
SetConstraintsNodeInTreeLock
Locks or unlocks the "ConstraintsNodeInTree" parameter.
SetContextualFeaturesSelectableAtCreationLock
Locks or unlocks the "ContextualFeaturesSelectableAtCreation" parameter.
SetDeleteWarningBoxLock
Locks or unlocks the "DeleteWarningBox" parameter.
SetDisplayGeometryAfterCurrentLock
Locks or unlocks the "DisplayGeometryAfterCurrent" parameter.
SetExpandSketchBasedFeaturesNodeAtCreationLock
Locks or unlocks the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
SetExternalReferencesAsVisibleLock
Locks or unlocks the "ExternalReferencesAsVisible" parameter.
SetExternalReferencesAssemblyRootContextLock
Locks or unlocks the "ExternalReferencesAssemblyRootContext" parameter.
SetExternalReferencesNodeInTreeLock
Locks or unlocks the "ExternalReferencesNodeInTree" parameter.
SetHybridDesignModeLock
Locks or unlocks the "HybridDesignMode" parameter.
SetKnowledgeInHybridDesignModeLock
Locks or unlocks the "KnowledgeInHybridDesignMode" parameter.
SetLinkedExternalReferencesLock
Locks or unlocks the "LinkedExternalReferences" parameter.
SetLinkedExternalReferencesOnlyOnPublicationLock
Locks or unlocks the "LinkedExternalReferencesOnlyOnPublication" parameter.
SetLinkedExternalReferencesWarningAtCreationLock
Locks or unlocks the "LinkedExternalReferencesWarningAtCreation" parameter.
SetNamingModeLock
Locks or unlocks the "NamingMode" parameter.
SetNewWith3DSupportLock
Locks or unlocks the "NewWith3DSupport" parameter.
SetNewWithAxisSystemLock
Locks or unlocks the "NewWithAxisSystem" parameter.
SetNewWithGSLock
Locks or unlocks the "NewWithGS" parameter.
SetNewWithOGSLock
Locks or unlocks the "NewWithOGS" parameter.
SetNewWithPanelLock
Locks or unlocks the "NewWithPanel" parameter.
SetOnlyCurrentOperatedSolidSetInGeometryLock
Locks or unlocks the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
SetOnlyCurrentSolidSetInGeometryLock
Locks or unlocks the "OnlyCurrentSolidSetInGeometry" parameter.
SetParametersNodeInTreeLock
Locks or unlocks the "ParametersNodeInTree" parameter.
SetPublishTopologicalElementsLock
Locks or unlocks the "PublishTopologicalElements" parameter.
SetRelationsNodeInTreeLock
Locks or unlocks the "RelationsNodeInTree" parameter.
SetReplaceOnlyAfterCurrentLock
Locks or unlocks the "ReplaceOnlyAfterCurrent" parameter.
SetSurfaceElementsLocationLock
Locks or unlocks the "SurfaceElementsLocation" parameter.
SetUpdateElementsRefreshedLock
Locks or unlocks the "UpdateElementsRefreshed" parameter.
SetUpdateLinkedExternalReferencesLock
Locks or unlocks the "UpdateLinkedExternalReferences" parameter.
SetUpdateModeLock
Locks or unlocks the "UpdateMode" parameter.
SetUpdateStoppedOnErrorLock
Locks or unlocks the "UpdateStoppedOnError" parameter.

Properties


o Property AlsoDeleteExclusiveParents() As
Returns or sets the "AlsoDeleteExclusiveParents" parameter.
Role: This parameter defines if a exclusive parents of an object will also be deleted when the object is deleted.
This option is effective only when the "Deletion warning box" is displayed.
Parameters:
oDeleted
Current "AlsoDeleteExclusiveParents" parameter's value:
  • TRUE or 1 if exclusive parents are also deleted,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property AxisSystemSize() As
Returns or sets the "AxisSystemSize" parameter.
Role: This parameter determines the size of axis systems.
Parameters:
oSize
Current size of axis systems
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property BodiesUnderOperationsInTree() As
Returns or sets the "BodiesUnderOperationsInTree" parameter.
Role: This parameter determines if a Body node is displayed when it is being aggregated under a boolean operation (Add, Assemble, Remove, Intersect, Union Trim).
Its value can be changed even after a boolean operation has been created. Simply collapse and expand the federating boolean operation node for the specification tree to be refreshed.
Parameters:
oNodeDisplayed
Current "BodiesUnderOperationsInTree" parameter's value:
  • TRUE or 1 if such a node is displayed,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ColorSynchronizationEditability() As
Returns or sets the "ColorSynchronizationEditability" parameter.
Role: This parameter determines whether color synchronization property on Part is editable or not.
Color synchronization editability defines whether the property of synchronization on Part can be interactively editable If it is valuated to 1, user will be able to interactively modify the Part property of Color management tab for synchronization. If it is defined to 0, user will not be able to interactively modify the Part property of Color management tab for synchronization. This option cannot be changed after a document has been opened.
Parameters:
oActivated
Current "ColorSynchronizationEditability" parameter's value:
  • TRUE or 1, Part property option for synchronization is editable
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ColorSynchronizationMode() As
Returns or sets the "ColorSynchronizationMode" parameter.
Role: This parameter determines color synchronization mode for imported features in a part.
Color synchronization mode defines whether the imported feature, created through copy/paste as result with link mechanism, copies reference feature colors on its faces or not. If it is valuated to 1, synchronization will be effective and referece feature colors will be reported. If it is defined to 0, nothing will be copied(default mode). This option cannot be changed after a document has been opened.
Parameters:
oActivated
Current "ColorSynchronizationMode" parameter's value:
  • TRUE or 1 if reference feature colors are reported on imported feature,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ConstraintsInGeometry() As
Returns or sets the "ConstraintsInGeometry" parameter.
Role: This parameter enables constraints to be visualized in the 3D view.
Parameters:
oDisplayed
Current "Display constraints within 3D" parameter's value:
  • TRUE or 1 if constraints are displayed,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ConstraintsNodeInTree() As
Returns or sets the "ConstraintsNodeInTree" parameter.
Role: This parameter determines if a node called "Constraints" is created to contain all constraints.
Its value can be changed even after constraints have been created. The result is that the specification tree node display status will be affected.
Parameters:
oNodeDisplayed
Current "ConstraintsNodeInTree" parameter's value:
  • TRUE or 1 if such a node is displayed,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ContextualFeaturesSelectableAtCreation() As
Returns or sets the "ContextualFeaturesSelectableAtCreation" parameter.
Role: This parameter determines if contextual features can be selected during the creation of an other feature.
Parameters:
oContextualFeaturesSelectable
Current "ContextualFeaturesSelectableAtCreation" parameter's value:
  • TRUE or 1 if contextual features can be selected,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property DeleteWarningBox() As
Returns or sets the "DeleteWarningBox" parameter.
Role: This parameter defines if a warning box is displayed when an element is deleted.
Parameters:
oDisplayed
Current "DeleteWarningBox" parameter's value:
  • TRUE or 1 if a warning box is displayed at deletion,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property DisplayGeometryAfterCurrent() As
Returns or sets the "DisplayGeometryAfterCurrent" parameter.
Role: This parameter enables to visualize in the 3D features after the current object in O.G.S. and "solid and surface set".
Parameters:
oDisplayed
Current "DisplayGeometryAfterCurrent" parameter's value:
  • TRUE or 1 if such is the visualization,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ExpandSketchBasedFeaturesNodeAtCreation() As
Returns or sets the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
Role: This parameter determines if specification tree nodes for sketch-based features are expanded when such elements are created. This will enable to view their sketch node.
Parameters:
oNodeExpanded
Current "ExpandSketchBasedFeaturesNodeAtCreation" parameter's value:
  • TRUE or 1 if such nodes are expanded,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ExternalReferencesAsVisible() As
Returns or sets the "ExternalReferencesAsVisible" parameter.
Role: This parameter defines if an external reference is visible when being created.
Parameters:
oVisible
Current "ExternalReferencesAsVisible" parameter's value:
  • TRUE or 1 if external references are visible when being created,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ExternalReferencesAssemblyRootContext() As
Returns or sets the "ExternalReferencesAssemblyRootContext" parameter.
Role: This parameter defines if external references are created using the root context of an assembly.
Parameters:
oRootContextUsed
Current "ExternalReferencesAssemblyRootContext" parameter's value:
  • TRUE or 1 if external references are created using the root context of an assembly,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ExternalReferencesNodeInTree() As
Returns or sets the "ExternalReferencesNodeInTree" parameter.
Role: This parameter determines if a node called "External Reference" is created to contain all linked external references.
Its value can be changed even after linked external references have been created. The result is that the specification tree node display status will be affected.
Parameters:
oNodeDisplayed
Current "ExternalReferencesNodeInTree" parameter's value:
  • TRUE or 1 if such a node is displayed,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property HybridDesignMode() As
Returns or sets the "HybridDesignMode" parameter.
Role: This parameter determines if hybrid design is possible inside Part Bodies and bodies.
This option can be changed even after a document has been opened.
Parameters:
oHybridDesign
Current "HybridDesignMode" parameter's value:
  • TRUE or 1 if hybrid design is enabled,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property KnowledgeInHybridDesignMode() As
Returns or sets the "KnowledgeInHybridDesignMode" parameter.
Role: This parameter determines if knowledge features (formulas, parameters, rules, ...) can be located inside ordered sets.
This option can be changed even after a document has been opened.
Parameters:
oKnowledgeInHybridDesign
Current "KnowledgeInHybridDesignMode" parameter's value:
  • TRUE or 1 if hybrid design is enabled,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property LinkedExternalReferencesOnlyOnPublication() As
Returns or sets the "LinkedExternalReferencesOnlyOnPublication" parameter.
Role: This parameter restricts the creation of external references with links to only published elements.
This option is only used when external references are created with link.
Parameters:
oOnlyForPublishedElements
Current "LinkedExternalReferencesOnlyOnPublication" parameter's value:
  • TRUE or 1 if external references with link are only allowed on published elements,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property LinkedExternalReferencesWarningAtCreation() As
Returns or sets the "LinkedExternalReferencesWarningAtCreation" parameter.
Role: This parameter defines if a warning panel is displayed each time an external reference with llink is created. The panel enables the user to decide whether the link will be kept or not.
This option is only used when external references are created with link.
Parameters:
oWarningAtCreation
Current "LinkedExternalReferencesWarningAtCreation" parameter's value:
  • TRUE or 1 if a panel is displayed upon external references with link creation,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property LinkedExternalReferences() As
Returns or sets the "LinkedExternalReferences" parameter.
Role: This parameter enables creation of external references with links.
Parameters:
oWithLink
"LinkedExternalReferences" parameter's value:
  • TRUE or 1 if external references are created with links,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property NamingMode() As
Returns or sets the "NamingMode" parameter.
Role: This parameter determines how an element can be named through Edit/Properties or any operation creating a feature (Copy-Paste, etc.).
When this option is being changed, it only affects elements whose name is modified afterwards.
Parameters:
oNamingMode
Current "NamingMode" parameter's value:
  • catNoCheck when naming is rule-free,
  • catNamingCheckUnderSameNode when 2 elements cannot have the same name under the same node,
  • catNamingCheckWithinUIActiveObject when 2 elements cannot have the same name within a defined UIActiveObject.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property NewWith3DSupport() As
Returns or sets the "NewWith3DSupport" parameter.
Role: This parameter determines if a new .CATPart document will be created with 3D working support.
Parameters:
o3DSupportCreated
Current "NewWith3DSupport" parameter's value:
  • TRUE or 1 if a 3D support is created,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property NewWithAxisSystem() As
Returns or sets the "NewWithAxisSystem" parameter.
Role: This parameter determines if a new .CATPart document will be created with an Axis System.
Parameters:
oAxisSystemCreated
Current "NewWithAxisSystem" parameter's value:
  • TRUE or 1 if an axis system is created,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property NewWithGS() As
Returns or sets the "NewWithGS" parameter.
Role: This parameter determines if a new .CATPart document will be created with a Geometrical Set.
Parameters:
oGSCreated
Current "NewWithGS" parameter's value:
  • TRUE or 1 if a G.S. is created,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property NewWithOGS() As
Returns or sets the "NewWithOGS" parameter.
Role: This parameter determines if a new .CATPart document will be created with an Ordered Geometrical Set.
Parameters:
oOGSCreated
Current "NewWithOGS" parameter's value:
  • TRUE or 1 if an O.G.S. is created,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property NewWithPanel() As
Returns or sets the "NewWithPanel" parameter.
Role: This parameter determines if a dedicated 'New Part' panel is displayed when createing a new .CATPart document.
Parameters:
oNewPartPanelDisplayed
Current "NewWithPanel" parameter's value:
  • TRUE or 1 if the 'New Part' panel is displayed,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property OnlyCurrentOperatedSolidSetInGeometry() As
Returns or sets the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
Role: This parameter enables to visualize in the 3D only the current operated body's feature (operated means being aggregated in a boolean operation), as well as all other bodies and sets direcly inserted under the Part feature.
Parameters:
oDisplayed
Current "Display in 3D only current operated solid set" parameter's value:
  • TRUE or 1 if such is the visualization,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property OnlyCurrentSolidSetInGeometry() As
Returns or sets the "OnlyCurrentSolidSetInGeometry" parameter.
Role: This parameter enables to visualize in the 3D only the current operated body's feature (operated means being aggregated in a boolean operation), as well as all other bodies and sets direcly inserted under the Part feature.
Parameters:
oDisplayed
Current "Display in 3D only current operated solid set" parameter's value:
  • TRUE or 1 if such is the visualization,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ParametersNodeInTree() As
Returns or sets the "ParametersNodeInTree" parameter.
Role: This parameter determines if a node called "Parameters" is created to contain all Knowledgeware parameters.
Its value can be changed even after parameters have been created. The result is that the specification tree node display status will be affected.
Parameters:
oNodeDisplayed
Current "ParametersNodeInTree" parameter's value:
  • TRUE or 1 if such a node is displayed,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property PublishTopologicalElements() As
Returns or sets the "PublishTopologicalElements" parameter.
Role: This parameter defines if topological elements (faces, edges, vertices, axes extremities) can be published.
Parameters:
oTopologyAllowed
Current "PublishTopologicalElements" parameter's value:
  • TRUE or 1 if topological elements can be used for publication,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property RelationsNodeInTree() As
Returns or sets the "RelationsNodeInTree" parameter.
Role: This parameter determines if a node called "Relations" is created to contain all Knowledgeware relations (for instance formulas).
Its value can be changed even after parameters have been created. The result is that the specification tree node display status will be affected.
Parameters:
oNodeDisplayed
Current "RelationsNodeInTree" parameter's value:
  • TRUE or 1 if such a node is displayed,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property ReplaceOnlyAfterCurrent() As
Returns or sets the "ReplaceOnlyAfterCurrent" parameter.
Role: This parameter defines if the replace operation can only apply to components located after the current object.
Parameters:
oOnlyAfterCurrent
Current "ReplaceOnlyAfterCurrent" parameter's value:
  • TRUE or 1 if the replace operation can only apply to components located after the current object,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property SurfaceElementsLocation() As
Returns or sets the "SurfaceElementsLocation" parameter.
Role: This parameter determines where wireframe and surface elements are created when hybrid design is active.
This option can be changed when hybrid design mode is not active (but useless then), and also even after a document has been opened.
Parameters:
oLocation
Current "SurfaceElementsLocation" parameter's value:
  • catPartBodyLocation when elements are created within a PartBody,
  • catXGSLocation when elements are created within a G.S. or an O.G.S..
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property TrueColorMode() As
Returns or sets the "ColorInheritanceMode" parameter.
Role: This parameter determines color inheritance mode for absorbing features in a part.
Color inheritance mode defines which mode of propagation will be used to set color on an absorbing feature. If it is valuated to 1, absorbing feature will inherit colors from all their input. If it is defined to 0, absorbing features will inherit colors from their main input only (default mode). This option can be changed even after a document has been opened.
Parameters:
oActivated
Current "ColorInheritanceMode" parameter's value:
  • TRUE or 1 if absorbing features inherit from all their inputs,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property UpdateElementsRefreshed() As
Returns or sets the "UpdateElementsRefreshed" parameter.
Role: This parameter determines if elements visualization has to be refreshed individually during update tasks.
Parameters:
oElementsRefreshed
Current "UpdateElementsRefreshed" parameter's value:
  • TRUE or 1 if elements visualization is refreshed,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property UpdateLinkedExternalReferences() As
Returns or sets the "UpdateLinkedExternalReferences" parameter.
Role: This parameter determines if update tasks also apply to linked external references.
Parameters:
oExternalReferencesUpdated
Current "UpdateLinkedExternalReferences" parameter's value:
  • TRUE or 1 if the update tasks apply to linked external references,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property UpdateMode() As
Returns or sets the "UpdateMode" parameter.
Role: This parameter determines how the update of a .CATPart document is conducted.
Parameters:
oUpdateMode
Current update mode:
  • catAutomaticUpdate when update is automatically launched,
  • catManualUpdate when update has to be launched manually.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.
o Property UpdateStoppedOnError() As
Returns or sets the "UpdateStoppedOnError" parameter.
Role: This parameter determines if update tasks stop on the first detected error.
Parameters:
oStoppedOnError
Current "UpdateStoppedOnError" parameter's value:
  • TRUE or 1 if update tasks stop,
  • FALSE or 0 otherwise.
Returns:
S_OK if the parameter is correctly retrieved, E_FAIL otherwise.

Methods


o Func GetAlsoDeleteExclusiveParentsInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "AlsoDeleteExclusiveParents" parameter.
Role:Retrieves the state of the "AlsoDeleteExclusiveParents" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetAxisSystemSizeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "AxisSystemSize" parameter.
Role:Retrieves the state of the "AxisSystemSize" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetBodiesUnderOperationsInTreeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "BodiesUnderOperationsInTree" parameter.
Role:Retrieves the state of the "BodiesUnderOperationsInTree" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetColorSynchronizationEditabilityInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ColorSynchronizationEditability" parameter.
Role:Retrieves the state of the "ColorSynchronizationEditability" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetColorSynchronizationModeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ColorSynchronizationMode" parameter.
Role:Retrieves the state of the "ColorSynchronizationMode" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetConstraintsInGeometryInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ConstraintsInGeometry" parameter.
Role:Retrieves the state of the "ConstraintsInGeometry" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetConstraintsNodeInTreeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ConstraintsNodeInTree" parameter.
Role:Retrieves the state of the "ConstraintsNodeInTree" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetContextualFeaturesSelectableAtCreationInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ContextualFeaturesSelectableAtCreation" parameter.
Role:Retrieves the state of the "ContextualFeaturesSelectableAtCreation" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetDeleteWarningBoxInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "DeleteWarningBox" parameter.
Role:Retrieves the state of the "DeleteWarningBox" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetDisplayGeometryAfterCurrentInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "DisplayGeometryAfterCurrent" parameter.
Role:Retrieves the state of the "DisplayGeometryAfterCurrent" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetExpandSketchBasedFeaturesNodeAtCreationInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
Role:Retrieves the state of the "ExpandSketchBasedFeaturesNodeAtCreation" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetExternalReferencesAsVisibleInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ExternalReferencesAsVisible" parameter.
Role:Retrieves the state of the "ExternalReferencesAsVisible" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetExternalReferencesAssemblyRootContextInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ExternalReferencesAssemblyRootContext" parameter.
Role:Retrieves the state of the "ExternalReferencesAssemblyRootContext" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetExternalReferencesNodeInTreeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ExternalReferencesNodeInTree" parameter.
Role:Retrieves the state of the "ExternalReferencesNodeInTree" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetHybridDesignModeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "HybridDesignMode" parameter.
Role:Retrieves the state of the "HybridDesignMode" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetKnowledgeInHybridDesignModeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "KnowledgeInHybridDesignMode" parameter.
Role:Retrieves the state of the "KnowledgeInHybridDesignMode" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetLinkedExternalReferencesInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "LinkedExternalReferences" parameter.
Role:Retrieves the state of the "LinkedExternalReferences" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetLinkedExternalReferencesOnlyOnPublicationInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "LinkedExternalReferencesOnlyOnPublication" parameter.
Role:Retrieves the state of the "LinkedExternalReferencesOnlyOnPublication" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetLinkedExternalReferencesWarningAtCreationInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "LinkedExternalReferencesWarningAtCreation" parameter.
Role:Retrieves the state of the "LinkedExternalReferencesWarningAtCreation" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetNamingModeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "NamingMode" parameter.
Role:Retrieves the state of the "NamingMode" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetNewWith3DSupportInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "NewWith3DSupport" parameter.
Role:Retrieves the state of the "NewWith3DSupport" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetNewWithAxisSystemInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "NewWithAxisSystem" parameter.
Role:Retrieves the state of the "NewWithAxisSystem" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetNewWithGSInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "NewWithGS" parameter.
Role:Retrieves the state of the "NewWithGS" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetNewWithOGSInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "NewWithOGS" parameter.
Role:Retrieves the state of the "NewWithOGS" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetNewWithPanelInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "NewWithPanel" parameter.
Role:Retrieves the state of the "NewWithPanel" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetOnlyCurrentOperatedSolidSetInGeometryInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
Role:Retrieves the state of the "OnlyCurrentOperatedSolidSetInGeometry" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetOnlyCurrentSolidSetInGeometryInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "OnlyCurrentSolidSetInGeometry" parameter.
Role:Retrieves the state of the "OnlyCurrentSolidSetInGeometry" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetParametersNodeInTreeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ParametersNodeInTree" parameter.
Role:Retrieves the state of the "ParametersNodeInTree" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetPublishTopologicalElementsInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "PublishTopologicalElements" parameter.
Role:Retrieves the state of the "PublishTopologicalElements" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetRelationsNodeInTreeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "RelationsNodeInTree" parameter.
Role:Retrieves the state of the "RelationsNodeInTree" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetReplaceOnlyAfterCurrentInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ReplaceOnlyAfterCurrent" parameter.
Role:Retrieves the state of the "ReplaceOnlyAfterCurrent" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetSurfaceElementsLocationInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "SurfaceElementsLocation" parameter.
Role:Retrieves the state of the "SurfaceElementsLocation" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetTrueColorModeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "ColorInheritanceMode" parameter.
Role:Retrieves the state of the "ColorInheritanceMode" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetUpdateElementsRefreshedInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "UpdateElementsRefreshed" parameter.
Role:Retrieves the state of the "UpdateElementsRefreshed" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetUpdateLinkedExternalReferencesInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "UpdateLinkedExternalReferences" parameter.
Role:Retrieves the state of the "UpdateLinkedExternalReferences" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetUpdateModeInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "UpdateMode" parameter.
Role:Retrieves the state of the "UpdateMode" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetUpdateStoppedOnErrorInfo( ioAdminLevel,
ioLocked) As
Retrieves environment informations for the "UpdateStoppedOnError" parameter.
Role:Retrieves the state of the "UpdateStoppedOnError" parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub SetAlsoDeleteExclusiveParentsLock( iLocked)
Locks or unlocks the "AlsoDeleteExclusiveParents" parameter.
Role:Locks or unlocks the "AlsoDeleteExclusiveParents" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetAxisSystemSizeLock( iLocked)
Locks or unlocks the "AxisSystemSize" parameter.
Role:Locks or unlocks the "AxisSystemSize" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetBodiesUnderOperationsInTreeLock( iLocked)
Locks or unlocks the "BodiesUnderOperationsInTree" parameter.
Role:Locks or unlocks the "BodiesUnderOperationsInTree" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetColorSynchronizationEditabilityLock( iLocked)
Locks or unlocks the "ColorSynchronizationEditability" parameter.
Role:Locks or unlocks the "ColorSynchronizationEditability" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetColorSynchronizationModeLock( iLocked)
Locks or unlocks the "ColorSynchronizationMode" parameter.
Role:Locks or unlocks the "ColorSynchronizationMode" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetConstraintsInGeometryLock( iLocked)
Locks or unlocks the "ConstraintsInGeometry" parameter.
Role:Locks or unlocks the "ConstraintsInGeometry" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetConstraintsNodeInTreeLock( iLocked)
Locks or unlocks the "ConstraintsNodeInTree" parameter.
Role:Locks or unlocks the "ConstraintsNodeInTree" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetContextualFeaturesSelectableAtCreationLock( iLocked)
Locks or unlocks the "ContextualFeaturesSelectableAtCreation" parameter.
Role:Locks or unlocks the "ContextualFeaturesSelectableAtCreation" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetDeleteWarningBoxLock( iLocked)
Locks or unlocks the "DeleteWarningBox" parameter.
Role:Locks or unlocks the "DeleteWarningBox" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetDisplayGeometryAfterCurrentLock( iLocked)
Locks or unlocks the "DisplayGeometryAfterCurrent" parameter.
Role:Locks or unlocks the "DisplayGeometryAfterCurrent" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetExpandSketchBasedFeaturesNodeAtCreationLock( iLocked)
Locks or unlocks the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
Role:Locks or unlocks the "ExpandSketchBasedFeaturesNodeAtCreation" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetExternalReferencesAsVisibleLock( iLocked)
Locks or unlocks the "ExternalReferencesAsVisible" parameter.
Role:Locks or unlocks the "ExternalReferencesAsVisible" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetExternalReferencesAssemblyRootContextLock( iLocked)
Locks or unlocks the "ExternalReferencesAssemblyRootContext" parameter.
Role:Locks or unlocks the "ExternalReferencesAssemblyRootContext" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetExternalReferencesNodeInTreeLock( iLocked)
Locks or unlocks the "ExternalReferencesNodeInTree" parameter.
Role:Locks or unlocks the "ExternalReferencesNodeInTree" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetHybridDesignModeLock( iLocked)
Locks or unlocks the "HybridDesignMode" parameter.
Role:Locks or unlocks the "HybridDesignMode" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetKnowledgeInHybridDesignModeLock( iLocked)
Locks or unlocks the "KnowledgeInHybridDesignMode" parameter.
Role:Locks or unlocks the "KnowledgeInHybridDesignMode" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetLinkedExternalReferencesLock( iLocked)
Locks or unlocks the "LinkedExternalReferences" parameter.
Role:Locks or unlocks the "LinkedExternalReferences" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetLinkedExternalReferencesOnlyOnPublicationLock( iLocked)
Locks or unlocks the "LinkedExternalReferencesOnlyOnPublication" parameter.
Role:Locks or unlocks the "LinkedExternalReferencesOnlyOnPublication" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetLinkedExternalReferencesWarningAtCreationLock( iLocked)
Locks or unlocks the "LinkedExternalReferencesWarningAtCreation" parameter.
Role:Locks or unlocks the "LinkedExternalReferencesWarningAtCreation" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetNamingModeLock( iLocked)
Locks or unlocks the "NamingMode" parameter.
Role:Locks or unlocks the "NamingMode" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetNewWith3DSupportLock( iLocked)
Locks or unlocks the "NewWith3DSupport" parameter.
Role:Locks or unlocks the "NewWith3DSupport" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetNewWithAxisSystemLock( iLocked)
Locks or unlocks the "NewWithAxisSystem" parameter.
Role:Locks or unlocks the "NewWithAxisSystem" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetNewWithGSLock( iLocked)
Locks or unlocks the "NewWithGS" parameter.
Role:Locks or unlocks the "NewWithGS" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetNewWithOGSLock( iLocked)
Locks or unlocks the "NewWithOGS" parameter.
Role:Locks or unlocks the "NewWithOGS" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetNewWithPanelLock( iLocked)
Locks or unlocks the "NewWithPanel" parameter.
Role:Locks or unlocks the "NewWithPanel" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetOnlyCurrentOperatedSolidSetInGeometryLock( iLocked)
Locks or unlocks the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
Role:Locks or unlocks the "OnlyCurrentOperatedSolidSetInGeometry" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetOnlyCurrentSolidSetInGeometryLock( iLocked)
Locks or unlocks the "OnlyCurrentSolidSetInGeometry" parameter.
Role:Locks or unlocks the "OnlyCurrentSolidSetInGeometry" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetParametersNodeInTreeLock( iLocked)
Locks or unlocks the "ParametersNodeInTree" parameter.
Role:Locks or unlocks the "ParametersNodeInTree" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetPublishTopologicalElementsLock( iLocked)
Locks or unlocks the "PublishTopologicalElements" parameter.
Role:Locks or unlocks the "PublishTopologicalElements" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetRelationsNodeInTreeLock( iLocked)
Locks or unlocks the "RelationsNodeInTree" parameter.
Role:Locks or unlocks the "RelationsNodeInTree" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetReplaceOnlyAfterCurrentLock( iLocked)
Locks or unlocks the "ReplaceOnlyAfterCurrent" parameter.
Role:Locks or unlocks the "ReplaceOnlyAfterCurrent" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetSurfaceElementsLocationLock( iLocked)
Locks or unlocks the "SurfaceElementsLocation" parameter.
Role:Locks or unlocks the "SurfaceElementsLocation" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetUpdateElementsRefreshedLock( iLocked)
Locks or unlocks the "UpdateElementsRefreshed" parameter.
Role:Locks or unlocks the "UpdateElementsRefreshed" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetUpdateLinkedExternalReferencesLock( iLocked)
Locks or unlocks the "UpdateLinkedExternalReferences" parameter.
Role:Locks or unlocks the "UpdateLinkedExternalReferences" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetUpdateModeLock( iLocked)
Locks or unlocks the "UpdateMode" parameter.
Role:Locks or unlocks the "UpdateMode" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetUpdateStoppedOnErrorLock( iLocked)
Locks or unlocks the "UpdateStoppedOnError" parameter.
Role:Locks or unlocks the "UpdateStoppedOnError" parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.

Copyright © 2003, Dassault Systèmes. All rights reserved.