All Frameworks  Object Hierarchy  This Framework  Indexes   

FTASettingAtt (Object)

The interface to access a CATIAFTASettingAtt.

Property Index

AlphabeticOrder
Returns or sets the AlphabeticOrder setting parameter value.
AnalysisDisplayMode
Returns the AnalysisDisplayMode parameter.
AngulaireGeneralTolClass
Returns or sets the Dimension general class parameter.
AnnotDimInvalid
Returns the AnnotDimInvalid parameter.
AnnotDimOnDeletedGeom
Returns the AnnotDimOnDeletedGeom parameter.
AnnotDimOnUnloadedGeom
Returns the AnnotDimOnUnloadedGeom parameter.
AnnotOnZeroZSetting
Returns the AnnotOnZeroZSetting parameter.
BodyHideInCapture
Returns or sets the Visibility of Part instances, bodies and geometrical sets in Capture.
CATFTAChamferGeneralTolClass
Returns the CATFTAChamferGeneralTolClass parameter.
CATFTAEdgesLineType
Returns the CATFTAEdgesLineType parameter.
CATFTAEdgesThickness
Returns the CATFTAEdgesThickness parameter.
CATFTAUFAutoTolerancing
Returns the CATFTAUFAutoTolerancing parameter.
CATFTAUseLastTolerances
Returns the CATFTAUseLastTolerances parameter.
DimAfterCre
Returns or sets the Dimension After Creaation parameter.
DimAfterMod
Returns or sets the Dimension After Modification parameter.
DimBeforeCre
Returns or sets the Dimension Before Creation parameter.
DimBeforeMod
Returns or sets the Dimension Before Modification parameter.
DimBlankingCre
Returns or sets the Dimension Blanking Creation parameter.
DimBlankingMod
Returns or sets the Dimension Blanking Modification parameter.
DimConfigureSnapping
Returns or sets the DimConfigureSnapping parameter.
DimConstantOffset
Returns or sets the Constant Offset parameter.
DimCreateOn
Returns or sets the DimCreateOn parameter.
DimLinePosValue
Returns or sets the Dimension Line Position Value parameter.
DimLineUpBaseAngle
Returns or sets the Dimension Line Up Base Angle parameter.
DimLineUpBaseLength
Returns or sets the Dimension Line Up Base Length parameter.
DimLineUpCumul
Returns or sets the Dimension Line Up Cululated parameter.
DimLineUpFunnel
Returns or sets the Dimension Line Up Funnel parameter.
DimLineUpOffsetBetDimAngle
Returns gets the DimLineUpOffsetBetDimAngle parameter.
DimLineUpOffsetBetDimLength
Returns gets the DimLineUpOffsetBetDimLength parameter.
DimLineUpOffsetToRefAngle
Returns gets the DimLineUpOffsetToRefAngle parameter.
DimLineUpOffsetToRefLength
Returns gets the DimLineUpOffsetToRefLength parameter.
DimLineUpStack
Returns or sets the Dimension Line Up Stack parameter.
DimManualPositionning
Returns or sets the Manual Positionning parameter.
DimMove2dPartCre
Returns or sets the Dimension Move 2D Creation parameter.
DimMove2dPartMod
Returns or sets the Dimension Move 2D Modification parameter.
DimMoveDimLineCre
Returns or sets the Dimension Move Dimension Line Creation parameter.
DimMoveDimLineMod
Returns or sets the Dimension Move Dimension Line Modification parameter.
DimMoveLeaderCre
Get the Dimension leader Creation parameter.
DimMoveLeaderMod
Returns gets the Dimension leader modification parameter.
DimMoveSubPart
Returns or sets the DimMoveSubPart parameter.
DimMoveValueCre
Returns or sets the Dimension Move Value Creation parameter.
DimMoveValueMod
Returns or sets the Dimension Move Value Modification parameter.
DimORunCre
Returns or sets the Dimension Over Run Creation parameter.
DimORunMod
Returns or sets the Dimension Over Run Modification parameter.
DimOriDefaultSymb
Returns or sets the Dimension Orientation Default Symbol parameter.
DimSnapping
Returns or sets the Dimension Snapping parameter.
GeneralTolClass
Returns or sets the Dimension general class parameter.
HighlightDefAnnot
Returns or sets the Highlight Def Annot parameter.
NoaCreation
Returns or sets the Noa Creation parameter.
NonSemanticAllwaysUpgradeGeneralTol
Returns or sets the Non SemanticAllways Upgrade general tolerance parameter.
NonSemanticAllwaysUpgrade
Returns or sets the Non SemanticAllways Upgrade parameter.
NonSemanticDimAllowed
Returns or sets the Non Semantic Dim Allowed parameter.
NonSemanticMarked
Returns or sets the Non Semantic Marked parameter.
NonSemanticTolAllowed
Returns or sets the Non Semantic Tol Allowed parameter.
ParametersInTree
Returns or sets the Parameters in tree parameter.
RotationSnapAngle
Returns or sets the Rotation Snap Angle parameter.
RotationSnapAuto
Returns or sets the Rotation Snap Auto parameter.
SectPattern
Returns or sets the Pattern of Visu setting parameter value.
SelectPublishedGeometry
Returns or sets the Slect Published Geometry parameter.
ShiftedProfile
Returns or sets the Shifted Profile parameter.
TrueDimension
Returns the TrueDimension parameter.

Method Index

GetAlphabeticOrderInfo
Retrieves informations about the AlphabeticOrder setting parameter value.
GetAnalysisDisplayModeInfo
Retrieves environment informations for the AnalysisDisplayMode parameter.
GetAngulaireGeneralTolClassInfo
Retrieves informations about the Dimension general class tolerance setting parameter value.
GetAnnotDimInvalidColorInfo
Retrieves environment informations for the AnnotDimInvalidColor parameter.
GetAnnotDimInvalidColor
Returns the AnnotDimInvalidColor parameter.
GetAnnotDimInvalidInfo
Locks or unlocks the AnnotDimInvalid parameter.
GetAnnotDimOnDeletedGeomColorInfo
Retrieves environment informations for the AnnotDimOnDeletedGeomColor parameter.
GetAnnotDimOnDeletedGeomColor
Returns the AnnotDimOnDeletedGeomColor parameter.
GetAnnotDimOnDeletedGeomInfo
Retrieves environment informations for the AnnotDimOnDeletedGeom parameter.
GetAnnotDimOnUnloadedGeomColorInfo
Retrieves environment informations for the AnnotDimOnUnloadedGeomColor parameter.
GetAnnotDimOnUnloadedGeomColor
Returns the AnnotDimOnUnloadedGeomColor parameter.
GetAnnotDimOnUnloadedGeomInfo
Retrieves environment informations for the AnnotDimOnUnloadedGeom parameter.
GetAnnotOnZeroZSettingInfo
Retrieves environment informations for the AnnotOnZeroZSetting parameter.
GetBodyHideInCaptureInfo
Retrieves informations about the Visibility of Part instances, bodies and geometrical sets in Capture.
GetCATFTAChamferGeneralTolClassInfo
Retrieves environment informations for the CATFTAChamferGeneralTolClass parameter.
GetCATFTAEdgesColorInfo
Retrieves environment informations for the GetCATFTAEdgesColor parameter.
GetCATFTAEdgesColor
Returns the GetCATFTAEdgesColor parameter.
GetCATFTAEdgesLineTypeInfo
Retrieves environment informations for the CATFTAEdgesLineType parameter.
GetCATFTAEdgesThicknessInfo
Retrieves environment informations for the CATFTAEdgesThickness parameter.
GetCATFTAUFAutoTolerancingInfo
Retrieves environment informations for the CATFTAUFAutoTolerancing parameter.
GetCATFTAUseLastTolerancesInfo
Retrieves environment informations for the CATFTAUseLastTolerances parameter.
GetDimAfterCreInfo
Retrieves informations about the Dimension After Creation setting parameter value.
GetDimAfterModInfo
Retrieves informations about the Dimension After Modification setting parameter value.
GetDimBeforeCreInfo
Retrieves informations about the Dimension Before Creation setting parameter value.
GetDimBeforeModInfo
Retrieves informations about the Dimension Before Modification setting parameter value.
GetDimBlankingCreInfo
Retrieves informations about the Dimension Blanking Creation setting parameter value.
GetDimBlankingModInfo
Retrieves informations about the Dimension Blanking Modification setting parameter value.
GetDimConfigureSnappingInfo
Retrieves informations about the DimMoveSubPart setting parameter value.
GetDimConstantOffsetInfo
Retrieves informations about the Dimension Constant Offset setting parameter value.
GetDimCreateOnInfo
Retrieves informations about the DimCreateOn setting parameter value.
GetDimLinePosValueInfo
Retrieves informations about the Dimension Line Position Value setting parameter value.
GetDimLineUpBaseAngleInfo
Retrieves informations about the Dimension Line Up Base Angle setting parameter value.
GetDimLineUpBaseLengthInfo
Retrieves informations about the Dimension Line Up Base Length setting parameter value.
GetDimLineUpCumulInfo
Retrieves informations about the Dimension Line Up Cululated setting parameter value.
GetDimLineUpFunnelInfo
Retrieves informations about the Dimension Line Up Funnel setting parameter value.
GetDimLineUpOffsetBetDimAngleInfo
Retrieves informations about the DimLineUpOffsetBetDimAngle setting parameter value.
GetDimLineUpOffsetBetDimLengthInfo
Retrieves informations about the DimLineUpOffsetBetDimLength setting parameter value.
GetDimLineUpOffsetToRefAngleInfo
Retrieves informations about the DimLineUpOffsetToRefAngle setting parameter value.
GetDimLineUpOffsetToRefLengthInfo
Retrieves informations about the DimLineUpOffsetToRefLength setting parameter value.
GetDimLineUpStackInfo
Retrieves informations about the Dimension Line Up Stack setting parameter value.
GetDimManualPositionningInfo
Retrieves informations about the Dimension Manual Positionning setting parameter value.
GetDimMove2dPartCreInfo
Retrieves informations about the Dimension Move 2D Creation setting parameter value.
GetDimMove2dPartModInfo
Retrieves informations about the Dimension Move 2D Modification setting parameter value.
GetDimMoveDimLineCreInfo
Retrieves informations about the Dimension Move Dimension Line Creation setting parameter value.
GetDimMoveDimLineModInfo
Retrieves informations about the Dimension Move Dimension Line Modification setting parameter value.
GetDimMoveLeaderCreInfo
Retrieves informations about the Dimension leader Creation setting parameter value.
GetDimMoveLeaderModInfo
Retrieves informations about the Dimension leader modification setting parameter value.
GetDimMoveSubPartInfo
Retrieves informations about the DimMoveSubPart setting parameter value.
GetDimMoveValueCreInfo
Retrieves informations about the Dimension Move Value Creation setting parameter value.
GetDimMoveValueModInfo
Retrieves informations about the Dimension Move Value Modification setting parameter value.
GetDimORunCreInfo
Retrieves informations about the Dimension Over Run Creation setting parameter value.
GetDimORunModInfo
Retrieves informations about the Dimension Over Run Modification setting parameter value.
GetDimOriDefaultSymbInfo
Retrieves informations about the Dimension Orientation Default Symbol setting parameter value.
GetDimSnappingInfo
Retrieves informations about the Dimension Snapping setting parameter value.
GetGeneralTolClassInfo
Retrieves informations about the Dimension general class tolerance setting parameter value.
GetHighlightDefAnnotInfo
Retrieves informations about the Highlight Def Annot setting parameter value.
GetNoaCreationInfo
Retrieves informations about the Noa Creation setting parameter value.
GetNonSemanticAllwaysUpgradeGeneralTolInfo
Retrieves informations about the Non Semantic Allways Upgrade general tolerance setting parameter value.
GetNonSemanticAllwaysUpgradeInfo
Retrieves informations about the Non Semantic Allways Upgrade setting parameter value.
GetNonSemanticDimAllowedInfo
Retrieves informations about the Non Semantic Dim Allowed setting parameter value.
GetNonSemanticMarkedInfo
Retrieves informations about the Non Semantic Marked setting parameter value.
GetNonSemanticTolAllowedInfo
Retrieves informations about the Non Semantic Tol Allowed setting parameter value.
GetParametersInTreeInfo
Retrieves informations about the Parameters in tree setting parameter value.
GetRotationSnapAngleInfo
Retrieves informations about the Rotation Snap Angle setting parameter value.
GetRotationSnapAutoInfo
Retrieves informations about the Rotation Snap Auto setting parameter value.
GetSectPatternInfo
Retrieves informations about the Pattern of Visu setting parameter value.
GetSelectPublishedGeometryInfo
Retrieves informations about the Select Published Geometry setting parameter value.
GetShiftedProfileInfo
Retrieves informations about the Shifted Profile setting parameter value.
GetTrueDimensionColorInfo
Retrieves environment informations for the TrueDimensionColor parameter.
GetTrueDimensionColor
Returns the TrueDimensionColor parameter.
GetTrueDimensionInfo
Retrieves environment informations for the TrueDimension parameter.
SetAlphabeticOrderLock
Locks or unlocks the AlphabeticOrder setting parameter value.
SetAnalysisDisplayModeLock
Locks or unlocks the AnalysisDisplayMode parameter.
SetAngulaireGeneralTolClassLock
Locks or unlocks the Dimension general class parameter.
SetAnnotDimInvalidColorLock
Locks or unlocks the AnnotDimInvalidColor parameter.
SetAnnotDimInvalidColor
Sets the AnnotDimInvalidColor parameter.
SetAnnotDimInvalidLock
Retrieves environment informations for the AnnotDimInvalid parameter.
SetAnnotDimOnDeletedGeomColorLock
Locks or unlocks the AnnotDimOnDeletedGeomColor parameter.
SetAnnotDimOnDeletedGeomColor
Sets the AnnotDimOnDeletedGeomColor parameter.
SetAnnotDimOnDeletedGeomLock
Locks or unlocks the AnnotDimOnDeletedGeom parameter.
SetAnnotDimOnUnloadedGeomColorLock
Locks or unlocks the AnnotDimOnUnloadedGeomColor parameter.
SetAnnotDimOnUnloadedGeomColor
Sets the AnnotDimOnUnloadedGeomColor parameter.
SetAnnotDimOnUnloadedGeomLock
Locks or unlocks the AnnotDimOnUnloadedGeom parameter.
SetAnnotOnZeroZSettingLock
Locks or unlocks the AnnotOnZeroZSetting parameter.
SetBodyHideInCaptureLock
Locks or unlocks the Dimension general class parameter.
SetCATFTAChamferGeneralTolClassLock
Locks or unlocks the CATFTAChamferGeneralTolClass parameter.
SetCATFTAEdgesColorLock
Locks or unlocks the GetCATFTAEdgesColor parameter.
SetCATFTAEdgesColor
Sets the GetCATFTAEdgesColor parameter.
SetCATFTAEdgesLineTypeLock
Locks or unlocks the CATFTAEdgesLineType parameter.
SetCATFTAEdgesThicknessLock
Locks or unlocks the CATFTAEdgesThickness parameter.
SetCATFTAUFAutoTolerancingLock
Locks or unlocks the CATFTAUFAutoTolerancing parameter.
SetCATFTAUseLastTolerancesLock
Locks or unlocks the CATFTAUseLastTolerances parameter.
SetDimAfterCreLock
Locks or unlocks the Dimension After Creaation parameter.
SetDimAfterModLock
Locks or unlocks the Dimension After Modification parameter.
SetDimBeforeCreLock
Locks or unlocks the Dimension Before Creation parameter.
SetDimBeforeModLock
Locks or unlocks the Dimension Before Modification parameter.
SetDimBlankingCreLock
Locks or unlocks the Dimension Blanking Creation parameter.
SetDimBlankingModLock
Locks or unlocks the Dimension Blanking Modification parameter.
SetDimConfigureSnappingLock
Locks or unlocks the DimConfigureSnapping parameter.
SetDimConstantOffsetLock
Locks or unlocks the Constant Offset parameter.
SetDimCreateOnLock
Locks or unlocks the DimCreateOn parameter.
SetDimLinePosValueLock
Locks or unlocks the Dimension Line Position Value parameter.
SetDimLineUpBaseAngleLock
Locks or unlocks the Dimension Line Up Base Angle parameter.
SetDimLineUpBaseLengthLock
Locks or unlocks the Dimension Line Up Base Length parameter.
SetDimLineUpCumulLock
Locks or unlocks the Dimension Line Up Cululated parameter.
SetDimLineUpFunnelLock
Locks or unlocks the Dimension Line Up Funnel parameter.
SetDimLineUpOffsetBetDimAngleLock
Locks or unlocks the DimLineUpOffsetBetDimAngle parameter.
SetDimLineUpOffsetBetDimLengthLock
Locks or unlocks the DimLineUpOffsetBetDimLength parameter.
SetDimLineUpOffsetToRefAngleLock
Locks or unlocks the DimLineUpOffsetToRefAngle parameter.
SetDimLineUpOffsetToRefLengthLock
Locks or unlocks the DimLineUpOffsetToRefLength parameter.
SetDimLineUpStackLock
Locks or unlocks the Dimension Line Up Stack parameter.
SetDimManualPositionningLock
Locks or unlocks the Manual Positionning parameter.
SetDimMove2dPartCreLock
Locks or unlocks the Dimension Move 2D Creation parameter.
SetDimMove2dPartModLock
Locks or unlocks the Dimension Move 2D Modification parameter.
SetDimMoveDimLineCreLock
Locks or unlocks the Dimension Move Dimension Line Creation parameter.
SetDimMoveDimLineModLock
Locks or unlocks the Dimension Move Dimension Line Modification parameter.
SetDimMoveLeaderCreLock
Locks or unlocks the Dimension leader Creation parameter.
SetDimMoveLeaderModLock
Locks or unlocks the Dimension leader modification parameter.
SetDimMoveSubPartLock
Locks or unlocks the DimMoveSubPart parameter.
SetDimMoveValueCreLock
Locks or unlocks the Dimension Move Value Creation parameter.
SetDimMoveValueModLock
Locks or unlocks the Dimension Move Value Modification parameter.
SetDimORunCreLock
Locks or unlocks the Dimension Over Run Creation parameter.
SetDimORunModLock
Locks or unlocks the Dimension Over Run Modification parameter.
SetDimOriDefaultSymbLock
Locks or unlocks the Dimension Orientation Default Symbol parameter.
SetDimSnappingLock
Locks or unlocks the Dimension Snapping parameter.
SetGeneralTolClassLock
Locks or unlocks the Dimension general class parameter.
SetHighlightDefAnnotLock
Locks or unlocks the Highlight Def Annot parameter.
SetNoaCreationLock
Locks or unlocks the Noa Creation parameter.
SetNonSemanticAllwaysUpgradeGeneralTolLock
Locks or unlocks the Non Semantic Allways Upgrade general tolerance parameter.
SetNonSemanticAllwaysUpgradeLock
Locks or unlocks the Non Semantic Allways Upgrade parameter.
SetNonSemanticDimAllowedLock
Locks or unlocks the Non Semantic Dim Allowed parameter.
SetNonSemanticMarkedLock
Locks or unlocks the Non Semantic Marked parameter.
SetNonSemanticTolAllowedLock
Locks or unlocks the Non Semantic Tol Allowed parameter.
SetParametersInTreeLock
Locks or unlocks the Parameters in tree parameter.
SetRotationSnapAngleLock
Locks or unlocks the Rotation Snap Angle parameter.
SetRotationSnapAutoLock
Locks or unlocks the Rotation Snap Auto parameter.
SetSectPatternLock
Locks or unlocks the Pattern of Visu setting parameter value.
SetSelectPublishedGeometryLock
Locks or unlocks the Select Published Geometry parameter.
SetShiftedProfileLock
Locks or unlocks the Shifted Profile parameter.
SetTrueDimensionColorLock
Locks or unlocks the TrueDimensionColor parameter.
SetTrueDimensionColor
Sets the TrueDimensionColor parameter.
SetTrueDimensionLock
Locks or unlocks the TrueDimension parameter.

Properties


o Property AlphabeticOrder() As
Returns or sets the AlphabeticOrder setting parameter value.
True if the AlphabeticOrder setting parameter is checked.
Role: When set to True, the FTA 3D Annotation representations are saved in CGR. Otherwise, they are not saved.
o Property AnalysisDisplayMode() As
Returns the AnalysisDisplayMode parameter.
o Property AngulaireGeneralTolClass() As
Returns or sets the Dimension general class parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property AnnotDimInvalid() As
Returns the AnnotDimInvalid parameter.
o Property AnnotDimOnDeletedGeom() As
Returns the AnnotDimOnDeletedGeom parameter.
o Property AnnotDimOnUnloadedGeom() As
Returns the AnnotDimOnUnloadedGeom parameter.
o Property AnnotOnZeroZSetting() As
Returns the AnnotOnZeroZSetting parameter.
o Property BodyHideInCapture() As
Returns or sets the Visibility of Part instances, bodies and geometrical sets in Capture.

Ensure consistency with the C++ interface to which the work is delegated.

o Property CATFTAChamferGeneralTolClass() As
Returns the CATFTAChamferGeneralTolClass parameter.
o Property CATFTAEdgesLineType() As
Returns the CATFTAEdgesLineType parameter.
o Property CATFTAEdgesThickness() As
Returns the CATFTAEdgesThickness parameter.
o Property CATFTAUFAutoTolerancing() As
Returns the CATFTAUFAutoTolerancing parameter.
o Property CATFTAUseLastTolerances() As
Returns the CATFTAUseLastTolerances parameter.
o Property DimAfterCre() As
Returns or sets the Dimension After Creaation parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimAfterMod() As
Returns or sets the Dimension After Modification parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimBeforeCre() As
Returns or sets the Dimension Before Creation parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimBeforeMod() As
Returns or sets the Dimension Before Modification parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimBlankingCre() As
Returns or sets the Dimension Blanking Creation parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimBlankingMod() As
Returns or sets the Dimension Blanking Modification parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimConfigureSnapping() As
Returns or sets the DimConfigureSnapping parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimConstantOffset() As
Returns or sets the Constant Offset parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimCreateOn() As
Returns or sets the DimCreateOn parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimLinePosValue() As
Returns or sets the Dimension Line Position Value parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimLineUpBaseAngle() As
Returns or sets the Dimension Line Up Base Angle parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimLineUpBaseLength() As
Returns or sets the Dimension Line Up Base Length parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimLineUpCumul() As
Returns or sets the Dimension Line Up Cululated parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimLineUpFunnel() As
Returns or sets the Dimension Line Up Funnel parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimLineUpOffsetBetDimAngle() As
Returns gets the DimLineUpOffsetBetDimAngle parameter.
Parameters:
oValue
Output value of the DimLineUpOffsetBetDimAngle. If return code E_FAIL oValue is not obtained. If return code S_OK oValue is obtained.
o Property DimLineUpOffsetBetDimLength() As
Returns gets the DimLineUpOffsetBetDimLength parameter.
Parameters:
oValue
Output value of the DimLineUpOffsetBetDimLength. If return code E_FAIL oValue is not obtained. If return code S_OK oValue is obtained.
o Property DimLineUpOffsetToRefAngle() As
Returns gets the DimLineUpOffsetToRefAngle parameter.
Parameters:
oValue
Output value of the DimLineUpOffsetToRefAngle. If return code E_FAIL oValue is not obtained. If return code S_OK oValue is obtained.
o Property DimLineUpOffsetToRefLength() As
Returns gets the DimLineUpOffsetToRefLength parameter.
Parameters:
oValue
Output value of the DimLineUpOffsetToRefLength. If return code E_FAIL oValue is not obtained. If return code S_OK oValue is obtained.
o Property DimLineUpStack() As
Returns or sets the Dimension Line Up Stack parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimManualPositionning() As
Returns or sets the Manual Positionning parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimMove2dPartCre() As
Returns or sets the Dimension Move 2D Creation parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimMove2dPartMod() As
Returns or sets the Dimension Move 2D Modification parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimMoveDimLineCre() As
Returns or sets the Dimension Move Dimension Line Creation parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimMoveDimLineMod() As
Returns or sets the Dimension Move Dimension Line Modification parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimMoveLeaderCre() As
Get the Dimension leader Creation parameter.
Parameters:
oValue
Output value of the Dimension Leader creation check box status. If return code E_FAIL oValue is not obtained. If return code S_OK oValue is obtained.
o Property DimMoveLeaderMod() As
Returns gets the Dimension leader modification parameter.
Parameters:
oValue
Output value of the Dimension Leader modification check box status. If return code E_FAIL oValue is not obtained. If return code S_OK oValue is obtained.
o Property DimMoveSubPart() As
Returns or sets the DimMoveSubPart parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimMoveValueCre() As
Returns or sets the Dimension Move Value Creation parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimMoveValueMod() As
Returns or sets the Dimension Move Value Modification parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimORunCre() As
Returns or sets the Dimension Over Run Creation parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimORunMod() As
Returns or sets the Dimension Over Run Modification parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimOriDefaultSymb() As
Returns or sets the Dimension Orientation Default Symbol parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property DimSnapping() As
Returns or sets the Dimension Snapping parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property GeneralTolClass() As
Returns or sets the Dimension general class parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property HighlightDefAnnot() As
Returns or sets the Highlight Def Annot parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property NoaCreation() As
Returns or sets the Noa Creation parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property NonSemanticAllwaysUpgradeGeneralTol() As
Returns or sets the Non SemanticAllways Upgrade general tolerance parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property NonSemanticAllwaysUpgrade() As
Returns or sets the Non SemanticAllways Upgrade parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property NonSemanticDimAllowed() As
Returns or sets the Non Semantic Dim Allowed parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property NonSemanticMarked() As
Returns or sets the Non Semantic Marked parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property NonSemanticTolAllowed() As
Returns or sets the Non Semantic Tol Allowed parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property ParametersInTree() As
Returns or sets the Parameters in tree parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property RotationSnapAngle() As
Returns or sets the Rotation Snap Angle parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property RotationSnapAuto() As
Returns or sets the Rotation Snap Auto parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property SectPattern() As
Returns or sets the Pattern of Visu setting parameter value.
True if the Pattern of Visu setting parameter is checked.
Role: When set to True, the FTA 3D Annotation representations are saved in CGR. Otherwise, they are not saved.
o Property SelectPublishedGeometry() As
Returns or sets the Slect Published Geometry parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property ShiftedProfile() As
Returns or sets the Shifted Profile parameter.

Ensure consistency with the C++ interface to which the work is delegated.

o Property TrueDimension() As
Returns the TrueDimension parameter.

Methods


o Func GetAlphabeticOrderInfo( AdminLevel,
oLocked) As
Retrieves informations about the AlphabeticOrder setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetAnalysisDisplayModeInfo( AdminLevel,
oLocked) As
Retrieves environment informations for the AnalysisDisplayMode parameter.
Role:Retrieves the state of the AnalysisDisplayMode parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetAngulaireGeneralTolClassInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension general class tolerance setting parameter value.
Refer to
SettingController for a detailled description.
o Sub GetAnnotDimInvalidColorInfo( ioAdminLevel,
ioLocked,
oModified)
Retrieves environment informations for the AnnotDimInvalidColor parameter.
Role:Retrieves the state of the AnnotDimInvalidColor parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetAnnotDimInvalidColor( oValueR,
oValueG,
oValueB)
Returns the AnnotDimInvalidColor parameter.
o Func GetAnnotDimInvalidInfo( AdminLevel,
oLocked) As
Locks or unlocks the AnnotDimInvalid parameter.
Role:Locks or unlocks the AnnotDimInvalid parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub GetAnnotDimOnDeletedGeomColorInfo( ioAdminLevel,
ioLocked,
oModified)
Retrieves environment informations for the AnnotDimOnDeletedGeomColor parameter.
Role:Retrieves the state of the AnnotDimOnDeletedGeomColor parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetAnnotDimOnDeletedGeomColor( oValueR,
oValueG,
oValueB)
Returns the AnnotDimOnDeletedGeomColor parameter.
o Func GetAnnotDimOnDeletedGeomInfo( AdminLevel,
oLocked) As
Retrieves environment informations for the AnnotDimOnDeletedGeom parameter.
Role:Retrieves the state of the AnnotDimOnDeletedGeom parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetAnnotDimOnUnloadedGeomColorInfo( ioAdminLevel,
ioLocked,
oModified)
Retrieves environment informations for the AnnotDimOnUnloadedGeomColor parameter.
Role:Retrieves the state of the AnnotDimOnUnloadedGeomColor parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetAnnotDimOnUnloadedGeomColor( oValueR,
oValueG,
oValueB)
Returns the AnnotDimOnUnloadedGeomColor parameter.
o Func GetAnnotDimOnUnloadedGeomInfo( AdminLevel,
oLocked) As
Retrieves environment informations for the AnnotDimOnUnloadedGeom parameter.
Role:Retrieves the state of the AnnotDimOnUnloadedGeom parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetAnnotOnZeroZSettingInfo( AdminLevel,
oLocked) As
Retrieves environment informations for the AnnotOnZeroZSetting parameter.
Role:Retrieves the state of the AnnotOnZeroZSetting parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetBodyHideInCaptureInfo( AdminLevel,
oLocked) As
Retrieves informations about the Visibility of Part instances, bodies and geometrical sets in Capture.
Refer to
SettingController for a detailled description.
o Func GetCATFTAChamferGeneralTolClassInfo( AdminLevel,
oLocked) As
Retrieves environment informations for the CATFTAChamferGeneralTolClass parameter.
Role:Retrieves the state of the CATFTAChamferGeneralTolClass parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetCATFTAEdgesColorInfo( ioAdminLevel,
ioLocked,
oModified)
Retrieves environment informations for the GetCATFTAEdgesColor parameter.
Role:Retrieves the state of the GetCATFTAEdgesColor parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetCATFTAEdgesColor( oValueR,
oValueG,
oValueB)
Returns the GetCATFTAEdgesColor parameter.
o Sub GetCATFTAEdgesLineTypeInfo( ioAdminLevel,
ioLocked,
oModified)
Retrieves environment informations for the CATFTAEdgesLineType parameter.
Role:Retrieves the state of the CATFTAEdgesLineType parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetCATFTAEdgesThicknessInfo( ioAdminLevel,
ioLocked,
oModified)
Retrieves environment informations for the CATFTAEdgesThickness parameter.
Role:Retrieves the state of the CATFTAEdgesThickness parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetCATFTAUFAutoTolerancingInfo( ioAdminLevel,
ioLocked,
oModified)
Retrieves environment informations for the CATFTAUFAutoTolerancing parameter.
Role:Retrieves the state of the CATFTAUFAutoTolerancing parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetCATFTAUseLastTolerancesInfo( AdminLevel,
oLocked) As
Retrieves environment informations for the CATFTAUseLastTolerances parameter.
Role:Retrieves the state of the CATFTAUseLastTolerances parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Func GetDimAfterCreInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension After Creation setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimAfterModInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension After Modification setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimBeforeCreInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Before Creation setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimBeforeModInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Before Modification setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimBlankingCreInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Blanking Creation setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimBlankingModInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Blanking Modification setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimConfigureSnappingInfo( AdminLevel,
oLocked) As
Retrieves informations about the DimMoveSubPart setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimConstantOffsetInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Constant Offset setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimCreateOnInfo( AdminLevel,
oLocked) As
Retrieves informations about the DimCreateOn setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimLinePosValueInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Line Position Value setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpBaseAngleInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Line Up Base Angle setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpBaseLengthInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Line Up Base Length setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpCumulInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Line Up Cululated setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpFunnelInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Line Up Funnel setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpOffsetBetDimAngleInfo( AdminLevel,
oLocked) As
Retrieves informations about the DimLineUpOffsetBetDimAngle setting parameter value.
Parameters:
AdminLevel
Input/Output parameter, is the administration level.
oLocked
Input/Output parameter, is the lock status of the check button.
oModified
Output paramter which gives the status as boolean if the status is modified. If return code E_FAIL the values are not obtained. If return code S_OK the values are obtained.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpOffsetBetDimLengthInfo( AdminLevel,
oLocked) As
Retrieves informations about the DimLineUpOffsetBetDimLength setting parameter value.
Parameters:
AdminLevel
Input/Output parameter, is the administration level.
oLocked
Input/Output parameter, is the lock status of the check button.
oModified
Output paramter which gives the status as boolean if the status is modified. If return code E_FAIL the values are not obtained. If return code S_OK the values are obtained.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpOffsetToRefAngleInfo( AdminLevel,
oLocked) As
Retrieves informations about the DimLineUpOffsetToRefAngle setting parameter value.
Parameters:
AdminLevel
Input/Output parameter, is the administration level.
oLocked
Input/Output parameter, is the lock status of the check button.
oModified
Output paramter which gives the status as boolean if the status is modified. If return code E_FAIL the values are not obtained. If return code S_OK the values are obtained.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpOffsetToRefLengthInfo( AdminLevel,
oLocked) As
Retrieves informations about the DimLineUpOffsetToRefLength setting parameter value.
Parameters:
AdminLevel
Input/Output parameter, is the administration level.
oLocked
Input/Output parameter, is the lock status of the check button.
oModified
Output paramter which gives the status as boolean if the status is modified. If return code E_FAIL the values are not obtained. If return code S_OK the values are obtained.
Refer to
SettingController for a detailled description.
o Func GetDimLineUpStackInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Line Up Stack setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimManualPositionningInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Manual Positionning setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimMove2dPartCreInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Move 2D Creation setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimMove2dPartModInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Move 2D Modification setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimMoveDimLineCreInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Move Dimension Line Creation setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimMoveDimLineModInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Move Dimension Line Modification setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimMoveLeaderCreInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension leader Creation setting parameter value.
Parameters:
AdminLevel
Input/Output parameter, is the administration level.
oLocked
Input/Output parameter, is the lock status of the check button.
oModified
Output paramter which gives the status as boolean if the status is modified. If return code E_FAIL the values are not obtained. If return code S_OK the values are obtained.
Refer to
SettingController for a detailled description.
o Func GetDimMoveLeaderModInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension leader modification setting parameter value.
Parameters:
AdminLevel
Input/Output parameter, is the administration level.
oLocked
Input/Output parameter, is the lock status of the check button.
oModified
Output paramter which gives the status as boolean if the status is modified. If return code E_FAIL the values are not obtained. If return code S_OK the values are obtained.
Refer to
SettingController for a detailled description.
o Func GetDimMoveSubPartInfo( AdminLevel,
oLocked) As
Retrieves informations about the DimMoveSubPart setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimMoveValueCreInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Move Value Creation setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimMoveValueModInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Move Value Modification setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimORunCreInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Over Run Creation setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimORunModInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Over Run Modification setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimOriDefaultSymbInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Orientation Default Symbol setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetDimSnappingInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension Snapping setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetGeneralTolClassInfo( AdminLevel,
oLocked) As
Retrieves informations about the Dimension general class tolerance setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetHighlightDefAnnotInfo( AdminLevel,
oLocked) As
Retrieves informations about the Highlight Def Annot setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetNoaCreationInfo( AdminLevel,
oLocked) As
Retrieves informations about the Noa Creation setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetNonSemanticAllwaysUpgradeGeneralTolInfo( AdminLevel,
oLocked) As
Retrieves informations about the Non Semantic Allways Upgrade general tolerance setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetNonSemanticAllwaysUpgradeInfo( AdminLevel,
oLocked) As
Retrieves informations about the Non Semantic Allways Upgrade setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetNonSemanticDimAllowedInfo( AdminLevel,
oLocked) As
Retrieves informations about the Non Semantic Dim Allowed setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetNonSemanticMarkedInfo( AdminLevel,
oLocked) As
Retrieves informations about the Non Semantic Marked setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetNonSemanticTolAllowedInfo( AdminLevel,
oLocked) As
Retrieves informations about the Non Semantic Tol Allowed setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetParametersInTreeInfo( AdminLevel,
oLocked) As
Retrieves informations about the Parameters in tree setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetRotationSnapAngleInfo( AdminLevel,
oLocked) As
Retrieves informations about the Rotation Snap Angle setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetRotationSnapAutoInfo( AdminLevel,
oLocked) As
Retrieves informations about the Rotation Snap Auto setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetSectPatternInfo( AdminLevel,
oLocked) As
Retrieves informations about the Pattern of Visu setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetSelectPublishedGeometryInfo( AdminLevel,
oLocked) As
Retrieves informations about the Select Published Geometry setting parameter value.
Refer to
SettingController for a detailled description.
o Func GetShiftedProfileInfo( AdminLevel,
oLocked) As
Retrieves informations about the Shifted Profile setting parameter value.
Refer to
SettingController for a detailled description.
o Sub GetTrueDimensionColorInfo( ioAdminLevel,
ioLocked,
oModified)
Retrieves environment informations for the TrueDimensionColor parameter.
Role:Retrieves the state of the TrueDimensionColor parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub GetTrueDimensionColor( oValueR,
oValueG,
oValueB)
Returns the TrueDimensionColor parameter.
o Func GetTrueDimensionInfo( AdminLevel,
oLocked) As
Retrieves environment informations for the TrueDimension parameter.
Role:Retrieves the state of the TrueDimension parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub SetAlphabeticOrderLock( iLocked)
Locks or unlocks the AlphabeticOrder setting parameter value.
Refer to
SettingController for a detailed description.
o Sub SetAnalysisDisplayModeLock( iLocked)
Locks or unlocks the AnalysisDisplayMode parameter.
Role:Locks or unlocks the AnalysisDisplayMode parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetAngulaireGeneralTolClassLock( iLocked)
Locks or unlocks the Dimension general class parameter.
o Sub SetAnnotDimInvalidColorLock( iLocked)
Locks or unlocks the AnnotDimInvalidColor parameter.
Role:Locks or unlocks the AnnotDimInvalidColor parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetAnnotDimInvalidColor( iValueR,
iValueG,
iValueB)
Sets the AnnotDimInvalidColor parameter.
o Sub SetAnnotDimInvalidLock( iLocked)
Retrieves environment informations for the AnnotDimInvalid parameter.
Role:Retrieves the state of the AnnotDimInvalid parameter in the current environment.
Parameters:
ioAdminLevel

If the parameter is locked, AdminLevel gives the administration level that imposes the value of the parameter.
If the parameter is not locked, AdminLevel gives the administration level that will give the value of the parameter after a reset.
ioLocked
Indicates if the parameter has been locked.
Returns:
Indicates if the parameter has been explicitly modified or remain to the administrated value.
o Sub SetAnnotDimOnDeletedGeomColorLock( iLocked)
Locks or unlocks the AnnotDimOnDeletedGeomColor parameter.
Role:Locks or unlocks the AnnotDimOnDeletedGeomColor parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetAnnotDimOnDeletedGeomColor( iValueR,
iValueG,
iValueB)
Sets the AnnotDimOnDeletedGeomColor parameter.
o Sub SetAnnotDimOnDeletedGeomLock( iLocked)
Locks or unlocks the AnnotDimOnDeletedGeom parameter.
Role:Locks or unlocks the AnnotDimOnDeletedGeom parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetAnnotDimOnUnloadedGeomColorLock( iLocked)
Locks or unlocks the AnnotDimOnUnloadedGeomColor parameter.
Role:Locks or unlocks the AnnotDimOnUnloadedGeomColor parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetAnnotDimOnUnloadedGeomColor( iValueR,
iValueG,
iValueB)
Sets the AnnotDimOnUnloadedGeomColor parameter.
o Sub SetAnnotDimOnUnloadedGeomLock( iLocked)
Locks or unlocks the AnnotDimOnUnloadedGeom parameter.
Role:Locks or unlocks the AnnotDimOnUnloadedGeom parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetAnnotOnZeroZSettingLock( iLocked)
Locks or unlocks the AnnotOnZeroZSetting parameter.
Role:Locks or unlocks the AnnotOnZeroZSetting parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetBodyHideInCaptureLock( iLocked)
Locks or unlocks the Dimension general class parameter.
o Sub SetCATFTAChamferGeneralTolClassLock( iLocked)
Locks or unlocks the CATFTAChamferGeneralTolClass parameter.
Role:Locks or unlocks the CATFTAChamferGeneralTolClass parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetCATFTAEdgesColorLock( iLocked)
Locks or unlocks the GetCATFTAEdgesColor parameter.
Role:Locks or unlocks the GetCATFTAEdgesColor parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetCATFTAEdgesColor( iValueR,
iValueG,
iValueB)
Sets the GetCATFTAEdgesColor parameter.
o Sub SetCATFTAEdgesLineTypeLock( iLocked)
Locks or unlocks the CATFTAEdgesLineType parameter.
Role:Locks or unlocks the CATFTAEdgesLineType parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetCATFTAEdgesThicknessLock( iLocked)
Locks or unlocks the CATFTAEdgesThickness parameter.
Role:Locks or unlocks the CATFTAEdgesThickness parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetCATFTAUFAutoTolerancingLock( iLocked)
Locks or unlocks the CATFTAUFAutoTolerancing parameter.
Role:Locks or unlocks the CATFTAUFAutoTolerancing parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetCATFTAUseLastTolerancesLock( iLocked)
Locks or unlocks the CATFTAUseLastTolerances parameter.
Role:Locks or unlocks the CATFTAUseLastTolerances parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetDimAfterCreLock( iLocked)
Locks or unlocks the Dimension After Creaation parameter.
o Sub SetDimAfterModLock( iLocked)
Locks or unlocks the Dimension After Modification parameter.
o Sub SetDimBeforeCreLock( iLocked)
Locks or unlocks the Dimension Before Creation parameter.
o Sub SetDimBeforeModLock( iLocked)
Locks or unlocks the Dimension Before Modification parameter.
o Sub SetDimBlankingCreLock( iLocked)
Locks or unlocks the Dimension Blanking Creation parameter.
o Sub SetDimBlankingModLock( iLocked)
Locks or unlocks the Dimension Blanking Modification parameter.
o Sub SetDimConfigureSnappingLock( iLocked)
Locks or unlocks the DimConfigureSnapping parameter.
o Sub SetDimConstantOffsetLock( iLocked)
Locks or unlocks the Constant Offset parameter.
o Sub SetDimCreateOnLock( iLocked)
Locks or unlocks the DimCreateOn parameter.
o Sub SetDimLinePosValueLock( iLocked)
Locks or unlocks the Dimension Line Position Value parameter.
o Sub SetDimLineUpBaseAngleLock( iLocked)
Locks or unlocks the Dimension Line Up Base Angle parameter.
o Sub SetDimLineUpBaseLengthLock( iLocked)
Locks or unlocks the Dimension Line Up Base Length parameter.
o Sub SetDimLineUpCumulLock( iLocked)
Locks or unlocks the Dimension Line Up Cululated parameter.
o Sub SetDimLineUpFunnelLock( iLocked)
Locks or unlocks the Dimension Line Up Funnel parameter.
o Sub SetDimLineUpOffsetBetDimAngleLock( iLocked)
Locks or unlocks the DimLineUpOffsetBetDimAngle parameter.
Parameters:
iLocked
Input value of the DimLineUpOffsetBetDimAngle (lock/unlock). If return code E_FAIL iLocked is not set. If return code S_OK iLocked is set.
o Sub SetDimLineUpOffsetBetDimLengthLock( iLocked)
Locks or unlocks the DimLineUpOffsetBetDimLength parameter.
Parameters:
iLocked
Input value of the DimLineUpOffsetBetDimLength (lock/unlock). If return code E_FAIL iLocked is not set. If return code S_OK iLocked is set.
o Sub SetDimLineUpOffsetToRefAngleLock( iLocked)
Locks or unlocks the DimLineUpOffsetToRefAngle parameter.
Parameters:
iLocked
Input value of the DimLineUpOffsetToRefAngle (lock/unlock). If return code E_FAIL iLocked is not set. If return code S_OK iLocked is set.
o Sub SetDimLineUpOffsetToRefLengthLock( iLocked)
Locks or unlocks the DimLineUpOffsetToRefLength parameter.
Parameters:
iLocked
Input value of the DimLineUpOffsetToRefLength (lock/unlock). If return code E_FAIL iLocked is not set. If return code S_OK iLocked is set.
o Sub SetDimLineUpStackLock( iLocked)
Locks or unlocks the Dimension Line Up Stack parameter.
o Sub SetDimManualPositionningLock( iLocked)
Locks or unlocks the Manual Positionning parameter.
o Sub SetDimMove2dPartCreLock( iLocked)
Locks or unlocks the Dimension Move 2D Creation parameter.
o Sub SetDimMove2dPartModLock( iLocked)
Locks or unlocks the Dimension Move 2D Modification parameter.
o Sub SetDimMoveDimLineCreLock( iLocked)
Locks or unlocks the Dimension Move Dimension Line Creation parameter.
o Sub SetDimMoveDimLineModLock( iLocked)
Locks or unlocks the Dimension Move Dimension Line Modification parameter.
o Sub SetDimMoveLeaderCreLock( iLocked)
Locks or unlocks the Dimension leader Creation parameter.
Parameters:
iLocked
Input value of the Dimension leader creation check box lock/unlock status. If return code E_FAIL iLocked is not set. If return code S_OK iLocked is set.
o Sub SetDimMoveLeaderModLock( iLocked)
Locks or unlocks the Dimension leader modification parameter.
Parameters:
iLocked
Input value of the Dimension leader modification check box (lock/unlock). If return code E_FAIL iLocked is not set. If return code S_OK iLocked is set.
o Sub SetDimMoveSubPartLock( iLocked)
Locks or unlocks the DimMoveSubPart parameter.
o Sub SetDimMoveValueCreLock( iLocked)
Locks or unlocks the Dimension Move Value Creation parameter.
o Sub SetDimMoveValueModLock( iLocked)
Locks or unlocks the Dimension Move Value Modification parameter.
o Sub SetDimORunCreLock( iLocked)
Locks or unlocks the Dimension Over Run Creation parameter.
o Sub SetDimORunModLock( iLocked)
Locks or unlocks the Dimension Over Run Modification parameter.
o Sub SetDimOriDefaultSymbLock( iLocked)
Locks or unlocks the Dimension Orientation Default Symbol parameter.
o Sub SetDimSnappingLock( iLocked)
Locks or unlocks the Dimension Snapping parameter.
o Sub SetGeneralTolClassLock( iLocked)
Locks or unlocks the Dimension general class parameter.
o Sub SetHighlightDefAnnotLock( iLocked)
Locks or unlocks the Highlight Def Annot parameter.
o Sub SetNoaCreationLock( iLocked)
Locks or unlocks the Noa Creation parameter.
o Sub SetNonSemanticAllwaysUpgradeGeneralTolLock( iLocked)
Locks or unlocks the Non Semantic Allways Upgrade general tolerance parameter.
o Sub SetNonSemanticAllwaysUpgradeLock( iLocked)
Locks or unlocks the Non Semantic Allways Upgrade parameter.
o Sub SetNonSemanticDimAllowedLock( iLocked)
Locks or unlocks the Non Semantic Dim Allowed parameter.
o Sub SetNonSemanticMarkedLock( iLocked)
Locks or unlocks the Non Semantic Marked parameter.
o Sub SetNonSemanticTolAllowedLock( iLocked)
Locks or unlocks the Non Semantic Tol Allowed parameter.
o Sub SetParametersInTreeLock( iLocked)
Locks or unlocks the Parameters in tree parameter.
o Sub SetRotationSnapAngleLock( iLocked)
Locks or unlocks the Rotation Snap Angle parameter.
o Sub SetRotationSnapAutoLock( iLocked)
Locks or unlocks the Rotation Snap Auto parameter.
o Sub SetSectPatternLock( iLocked)
Locks or unlocks the Pattern of Visu setting parameter value.
Refer to
SettingController for a detailed description.
o Sub SetSelectPublishedGeometryLock( iLocked)
Locks or unlocks the Select Published Geometry parameter.
o Sub SetShiftedProfileLock( iLocked)
Locks or unlocks the Shifted Profile parameter.
o Sub SetTrueDimensionColorLock( iLocked)
Locks or unlocks the TrueDimensionColor parameter.
Role:Locks or unlocks the TrueDimensionColor parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.
o Sub SetTrueDimensionColor( iValueR,
iValueG,
iValueB)
Sets the TrueDimensionColor parameter.
o Sub SetTrueDimensionLock( iLocked)
Locks or unlocks the TrueDimension parameter.
Role:Locks or unlocks the TrueDimension parameter if it is possible in the current administrative context. In user mode this method will always return E_FAIL.
Parameters:
iLocked
the locking operation to be performed Legal values:
TRUE : to lock the parameter.
FALSE: to unlock the parameter.

Copyright © 2003, Dassault Systèmes. All rights reserved.