All Frameworks Object Hierarchy This Framework Indexes
LICENSING INFORMATION: Creation of volume result requires GSO License
if GSO License is not granted , settting of Volume context has not effect
| o Property AngleLawInversion( | ) As |
| o Property AngleLawType( | ) As |
| o Property AngleLaw( | ) As |
| o Property Context( | ) As |
oContext the context
for the Sweep hybrid shape feature.
Dim oContext Set oContext = Sweep.Context
| o Property FirstGuideCrv( | ) As |
| o Property GuideDeviationActivity( | ) As |
| o Property GuideDeviation( | ) As (Read Only) |
| o Property GuideProjection( | ) As |
Sweep hybrid shape sweep explicit feature to True.
Sweep.GuideProjection = True
| o Property Mode( | ) As |
| o Property PositionMode( | ) As |
oPosMode the position mode
for the Sweep hybrid shape feature.
oPosMode = Sweep.PositionMode
| o Property PositionedProfile( | ) As |
| o Property ProfileXAxisComputationMode( | ) As |
oDirCompMode the Profile X Axis ComputationMode
for the Sweep hybrid shape feature.
oDirCompMode = Sweep.ProfileXAxisComputationMode
| o Property Profile( | ) As |
| o Property PullingDirection( | ) As |
ohDir the pulling direction feature
for the Sweep hybrid shape feature.
Dim ohDir As CATIAHybridShapeDirection Set ohDir = Sweep.PullingDirection
| o Property Reference( | ) As |
| o Property SecondGuideCrv( | ) As |
| o Property SmoothActivity( | ) As |
| o Property SmoothAngleThreshold( | ) As (Read Only) |
| o Property SolutionNo( | ) As |
| o Property Spine( | ) As |
| o Property SubType( | ) As |
| 1 | Explicit profile swept surface defined with reference surface |
| 2 | Explicit profile swept surface defined with two guide curves |
| 3 | Explicit profile swept surface defined with pulling direction |
| o Func GetAngleRef( | ii) As |
| o Sub GetFittingPoints( | opIAElemA, | |
| opIAElemB) |
| o Sub GetLongitudinalRelimiters( | opIAElemA, | |
| opIAElemB) |
| o Sub GetNbAngle( | oAng) |
| o Sub GetNbGuide( | oNum) |
| o Sub GetNbPosAngle( | oPosAng) |
| o Sub GetNbPosCoord( | oPosCoord) |
| o Func GetPosAngle( | ii) As |
| o Func GetPosCoord( | ii) As |
| o Func GetPosDirection( | ii) As |
| o Func GetPosPoint( | ii) As |
| o Func GetPosSwapAxes( | ii) As |
| o Sub GetRelimiters( | opIAElem1, | |
| opOrient1, | ||
| opIAElem2, | ||
| opOrient2) |
| o Sub IsSketchAxisUsedAsDefault( | oBoolean) |
| o Sub RemoveAngle( | ) |
| o Sub RemoveFittingPoints( | ) |
| o Sub RemoveGuide( | ) |
| o Sub SetAngleRef( | ii, | |
| Elem) |
| o Sub SetFittingPoints( | ipIAElemA, | |
| ipIAElemB) |
| o Sub SetGuideDeviation( | iLength) |
| o Sub SetLongitudinalRelimiters( | ipIAElemA, | |
| ipIAElemB) |
| o Sub SetPosAngle( | ii, | |
| Elem) |
| o Sub SetPosCoord( | ii, | |
| Elem) |
| o Sub SetPosDirection( | ii, | |
| Elem) |
| o Sub SetPosPoint( | ii, | |
| Elem) |
| o Sub SetPosSwapAxes( | ii, | |
| Elem) |
| o Sub SetRelimiters( | ipIAElem1, | |
| ipOrient1, | ||
| ipIAElem2, | ||
| ipOrient2) |
| o Sub SetSmoothAngleThreshold( | iAngle) |
| o Sub UseSketchAxisAsDefault( | iBoolean) |
Copyright © 2003, Dassault Systèmes. All rights reserved.