All Frameworks  Object Hierarchy  Indexes

A B C D E F G H I J K L M N O P R S T U V W Z

IDL Interface Index

A

ABQAnalysisCase object
Represents an Abaqus analysis case (ABQAnalysisCase) object.
ABQAnalysisCases object
ABQAnalysisModel object
Represents the Abaqus analysis model object.
ABQAnalyticalRigidSurface object
Represents an Abaqus Analytical rigid surface (ABQAnalyticalRigidSurface) object.
ABQBoundaryCondition object
Represents the base interface for Abaqus boundary condition objects.
ABQBoundaryConditions object
ABQClampBC object
Represents an Abaqus clamp (ABQClamp) object.
ABQConcentratedForce object
Represents an Abaqus concentrated force object (ABQConcentratedForce).
ABQDisplacementBC object
Represents an Abaqus displacement boundary condition (ABQDisplacementBC) object.
ABQExplicitDynamicsStep object
Represents an Abaqus explicit dynamics step (ABQExplicitDynamicsStep) object.
ABQFastenedConnectionEnhancement object
This interface has been deprecated.
ABQFastenedPair object
Represents an Abaqus Fastened Pair (ABQFastenedPair) object.
ABQFields object
ABQFilmCondition object
Represents an Abaqus film condition (ABQFilmCondition) object.
ABQGasketProperty object
ABQGeneralStaticStep object
Represents an Abaqus general static step (ABQGeneralStaticStep) object.
ABQGlobalElementAssignment object
Represents an Abaqus Global Element assignment (ABQGlobalElementAssignment) object.
ABQGravity object
Represents an Abaqus gravity (ABQGravity) object.
ABQHeatTransferStep object
Represents an Abaqus heat transfer step (ABQHeatTransferStep) object.
ABQInitialStep object
Represents an Abaqus initial step (ABQInitialStep) object.
ABQInitialTemperature object
Represents an Abaqus initial temperature object (ABQInitialTemperature).
ABQInteraction object
Represents the base interface for Abaqus interaction objects.
ABQInteractions object
ABQJob object
Represents an Abaqus job (ABQJob) object.
ABQJobs object
The collection of Abaqus (ABQJob) objects.
ABQLoad object
Represents the base interface for all load objects.
ABQLoads object
ABQMassScaling object
Represents an Abaqus Mass Scaling entity.
ABQMassScalings object
ABQMechConnBehavior object
Represents an Abaqus mechanical connection behavior (ABQMechConnBehavior) object.
ABQPressure object
Represents an Abaqus pressure (ABQPressure) object.
ABQPretensionProperty object
Represents a pretension property (ABQPretensionProperty) object.
ABQProperties object
ABQProperty object
Represents the base interface for all Abaqus property objects.
ABQRigidBodyConstraint object
Represents an Abaqus rigid body constraint (ABQRigidBodyConstraint) object.
ABQRigidCoupling object
Represents an Abaqus rigid coupling (ABQRigidCoupling) object.
ABQSmoothCoupling object
Represents an Abaqus smooth coupling (ABQSmoothCoupling) object.
ABQSmoothStepAmplitude object
Represents a smooth step amplitude (ABQSmoothStepAmplitude) object.
ABQSpringConnectionProperty object
Represents an Abaqus spring connection property (ABQSpring) object.
ABQStep object
Represents a Abaqus analysis step (ABQStep) object.
ABQSteps object
ABQSurfaceToSurfaceContact object
Represents an Abaqus contact pair (ABQSurfaceToSurfaceContact) object.
ABQTabularAmplitude object
Represents a tabular amplitude (ABQTabularAmplitude) object.
ABQTemperature object
Represents an Abaqus temperature object (ABQTemperature).
ABQTemperatureHistory object
Represents an Abaqus temperature history object (ABQTemperatureHistory).
ABQThermalConnBehavior object
Represents an Abaqus thermal connection behavior (ABQThermalConnBehavior) object.
AMPPath object
This interface provides the methods to handle the feature AMPPath which is a list of AMPTags.
AMPTag object
This interface provides the methods to handle the feature AMPTag.
AccesslogStatisticsSettingAtt object
Interface for Accesslog statistic Controler.
ActiveTask object
Represents the Active task of the resource in conjunction with a particular activity.
Activities object
The collection of activities related to the current activity.
Activity object
The object that represents an activity.
Add object
Represents the add, or union boolean operation.
Affinity object
Represents the hybrid shape Affinity feature object.
AnalysisAdaptivityManager object
The interface to access a CATIAAnalysisAdaptivityManager.
AnalysisCase object
Represent the analysis case object.
AnalysisCases object
The collection of analysis case making an Analysis.
AnalysisDocument object
Represents the document object for analysis.
AnalysisEntities object
The collection of analysis entities.
AnalysisEntity object
Represent the analysis entity object.
AnalysisExport object
AnalysisGeneralSettingAtt object
Interface to handle the Analysis & Simulation "GeneralSetting".
AnalysisGlobalSensor object
Represent the analysis global sensor.
AnalysisImage object
Represents the analysis image object.
AnalysisImages object
The collection of analysis images.
AnalysisImport object
AnalysisLinkedDocuments object
The collection of Documents linked by Analysis.
AnalysisLocalEntities object
The collection of local analysis entities.
AnalysisLocalEntity object
Represent the analysis local entity object.
AnalysisLocalSensor object
Represent the analysis local sensor.
AnalysisManager object
Represents the root object inside an analysis document.
AnalysisMaterial object
Represents an AnalysisMaterial object.
AnalysisMeshLocalSpecification object
The interface to access a CATIAAnalysisMeshLocalSpecification.
AnalysisMeshLocalSpecifications object
The interface to access a AnalysisMeshLocalSpecifications.
AnalysisMeshManager object
The interface to access a CATIAAnalysisMeshManager.
AnalysisMeshPart object
The interface to access a CATIAAnalysisMeshPart.
AnalysisMeshParts object
The collection of analysis meshparts.
AnalysisModel object
Represent the analysis model object.
AnalysisModels object
The collection of analysis models making an analysis document.
AnalysisOutputEntities object
The collection of analysis entities results of a set.
AnalysisPostManager object
Interface to define the Post Processing Manager.
AnalysisPostProSettingAtt object
Interface to handle the Analysis & Simulation "PostProcessingSetting".
AnalysisReportingSettingAtt object
Interface to handle the Analysis & Simulation "ReportingSetting".
AnalysisSensor object
Represent the analysis sensor.
AnalysisSet object
Represent the analysis set object.
AnalysisSets object
The collection of analysis sets.
AnalysisSettingAtt object
Interface to handle parameters of DELMIA Analysis Tools Options Tab page Role: This interface is implemented by a component which represents the controller of Analysis Tools Options parameter settings.
AnalysisSupports object
The collection of analysis case making an Analysis.
Analyze object
Represents the analysis object associated with a product.
Angle object
Represents the angle parameter.
AngularRepartition object
Represents the angular repartition.
AnnotatedView object
Represents an annotated view.
AnnotatedViews object
A collection of AnnotatedView objects.
Annotation object
Interface for the Technological Product Specification (TPS) objects.
AnnotationFactory object
Interface for the TPS Factory.
AnnotationSet object
Interface for the TPS Set of objects.
AnnotationSets object
Annotations object
Interface for collection of TPS objects CATIAAnnotation.
AnyObject object
Represents the base object for all other objects except collection and reference objects.
Application object
Represents the current CNext application and its frame window.
ArrBOMReport object
ArrBendableString object
The interface to access a CATIAArrBendableString

Using this prefered syntax will enable mkdoc to document your class.

ArrNomenclature object
Represents the UserNomenclature object.
ArrNomenclatureTree object
Represents the root User Dictionary object.
ArrNomenclatures object
The collection of UserNomenclature objects.
ArrSystemLineProduct object
The interface to access a CATIAArrSystemLineProduct

Using this prefered syntax will enable mkdoc to document your class.

ArrWorkbench object
Returns the Arrangement Workbench.
ArrangementArea object
Use this object to access an ArrangementArea object's properties and functions.
ArrangementAreas object
A Collection object for ArrangementArea objects.
ArrangementBoundaries object
A collection object for ArrangementBoundary objects.
ArrangementBoundary object
Access properties and functions of an ArrangementBoundary object.
ArrangementContour object
The ArrangementContour object.
ArrangementContours object
A collection object for ArrangementContours of an Area.
ArrangementItemReservation object
Use this object to access the ArrangementItemReservation properties and methods.
ArrangementItemReservations object
A collection object for ArrangementItemReservation objects.
ArrangementNode object
This interface provides access to a CATIAArrangementNode object.
ArrangementNodes object
A Collection object for ArrangementNode objects.
ArrangementPathway object
Use this object to access properties and methods of an ArrangementPathway object.
ArrangementPathways object
A collection object for ArrangementPathway objects.
ArrangementProduct object
Use this object as a factory for Arrangement collection objects.
ArrangementRectangle object
Use this object to access the properties and methods of an ArrangementRectangle object.
ArrangementRectangles object
A Collection object for ArrangementRectangle objects.
ArrangementRun object
Use this object to access the properties and methods of an ArrangementRun object.
ArrangementRuns object
A collection object of ArrangementRun objects.
AsmConstraintSettingAtt object
Represents the Assembly Constraints setting controller object.
AsmGeneralSettingAtt object
Represents the Assembly General setting controller object.
Assemble object
Represents the assemble boolean operation.
AssemblyBoolean object
Represents the AssemblyBoolean object.
AssemblyConvertor object
Product conversion object.
AssemblyFeature object
Represents the AssemblyFeature object.
AssemblyFeatures object
A collection of all the AssemblyFeature objects of a product.
AssemblyHole object
Represents the AssemblyHole object.
AssemblyPocket object
Represents the AssemblyPocket object.
AssemblySplit object
Represents the AssemblySplit object.
AssociatedRefFrame object
Interface dedicated to manage Datum Reference Frame associated to a TPS.
AsySimActivity object
Interface for a Delmia Simulation Activity.
AttachmentCont object
Interface representing xxx.
AutoDraft object
Represents the AutoDraft shape.
AutoFillet object
Represents the AutoFillet shape.
AutoWalkActivity object
Axis2D object
Interface defining a coordinate system in the 2D Space.
AxisSystem object
The object Axis System A axis system has got one origin point and three orthogonal axes, crossing at the origin point.
AxisSystems object
A collection of all the AxisSystem objects contained in the part.
AxisToAxis object
Represents the hybrid shape AxisToAxis feature object.

B

BasicComponent object
Interface designed to manage Analysis Basic Components.
BasicComponents object
The collection of Basic Components defining and analysis object.
BasicDevice object
Interface representing a Basic Device.
Behavior object
Represents a behavior.
BehaviorExtension object
Manages the behaviors of a technological object.
BehaviorSettingAtt object
Enables attribute access to BKT options.
BehaviorVBScript object
Represents the VBScript behavior.
Behaviors object
Represents the Behaviors collection currently managed by the application.
BiDimFeatEdge object
1-D boundary belonging to a feature whose topological result is two dimensional.
Bodies object
A collection of all the Body objects contained in the part.
Body object
The object that manages a sequence of shapes, a set of sketches, a set of hybrid bodies, a set of ordered geometrical sets and a set of hybrid shapes.
BoolParam object
Represents the boolean parameter.
BooleanShape object
Represents the shapes based on boolean operations on other shapes.
Boundary object
Topological cell, such as a face, an edge or a vertex.

C

CATBaseDispatch object
Base class for Automation interfaces.
CATBaseUnknown object
Base class for creating interfaces and for implementing interfaces.
CGRAdhesionSettingAtt object
Represents the base object to handle the parameters of the cache.
CacheSettingAtt object
Represents the base object to handle the parameters of the cache.
CalibOffsets object
Interface to set Robot base/Tool offsets based on Calibration.
Camera object
Represents the camera.
Camera2D object
Represents a 2D camera.
Camera3D object
Represents a 3D camera.
Cameras object
A collection of all the Camera objects currently attached to a Document object.
Capture object
CaptureFactory object
Interface for the Capture Factory.
Captures object
CatalogDocument object
Represents the Document object for catalog.
CatalogSHMObjectSettingAtt object
Represents the CATIA Sheet Metal Aerospace General setting controller object.
Chamfer object
Represents the chamfer shape.
Check object
Represents the check relation.
CircPattern object
Represents the circular pattern.
Circle2D object
Class defining a circle in 2D Space.
Clash object
Represents the Clash object.
ClashResult object
Represents the ClashResult object.
ClashResults object
A collection of all ClashResult objects currently managed by the application.
Clashes object
A collection of all Clash objects currently managed by the application.
CloseSurface object
Represents the Close feature.
Collection object
Represents the base object for collections.
CollisionFreeWalk object
ColorESSObjectSettingAtt object
The interface to access a CATIAColorESSObjectSettingAtt.
ColorSTDObjectSettingAtt object
The interface to access a CATIAColorSTDObjectSettingAtt.
CommandStatisticsSettingAtt object
Interface for Command statistic Controler
Role: the command statistics controler manages the values of all or only a part of the attributes available for the thematic.
CompositeTolerance object
Interface for accessing composite tolerance on a TPS.
CompositesMaterial object
Represents a Composites Material object.
Conflict object
Represents the Conflict object.
Conflicts object
A collection of all Conflict objects currently detected by a Clash object.
ConstRadEdgeFillet object
Represents the edge fillet shape with a constant radius.
Constraint object
A geometric constraint set for geometric elements of a part, a sketch, or a product.
ConstraintSatisfaction object
Represents the set of equation.
Constraints object
A collection of all geometric constraints set on a part, a sketch, or a product.
ControlPoint2D object
Class defining a spline control point in 2D Space.
ControledRadius object
Interface for accessing Controled Radius modifier on a linear TPS (ASME norm only).
Curve2D object
Class defining a curve in 2D Space.
CurveFastener object
Interface DELMIACurveFastener DELMIACurveFastener represent body in white fasteners of type curve.
CylindricalFace object
2-D boundary with a cylindrical geometry.

D

D5Device object
Interface representing a D5 Device.
DLNameSettingAtt object
Interface to handle the DLNames.
DMOOffset object
DMOOffsets object
DMOThickness object
DMOThicknesses object
DMUDataFlow object
Allows the DMU Data Flow Management within the DMU Navigator environment.
DMUTolSettingAtt object
Represents the DMU Tolerancing setting controller object.
DNB3DState object
DNB3DStateMgmt object
DNBAttachment object
Interface representing xxx.
DNBAttachmentFactory object
Interface representing xxx.
DNBFastenerItemServices object
DOFState object
Interface representing a Basic Device from which to get DOFState.
DatumSimple object
Interface for Simple Datum TPS (datum entity).
DatumTarget object
Interface for Datum Target TPS (datum entity).
DefaultAnnotation object
This interface is used to get information about default annotation.
DesignTable object
Represents the DesignTable object.
DevAnalysisSettingAtt object
Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Device Analysis Tools Options Tab page.
DeviceJointRelations object
Dimension object
Represents the dimension parameter.
Dimension3D object
DimensionLimit object
Represents the limit object of tolerance dimensions.
DimensionPattern object
Interface to dimension pattern.
DisconnectionSettingAtt object
Represents the base object to handle the parameters of automatic disconnection.
Distance object
Represents the Distance object.
Distances object
A collection of all Distance objects currently managed by the application.
Document object
Represents the document.
DocumentationSettingAtt object
Setting controller for the Help property tab page.
Documents object
A collection of all the Document objects currently managed by the application.
Draft object
Represents the draft shape.
DraftDomain object
Represents the draft domain.
DraftDomains object
The collection of draft domains used by the draft shape.
DraftingPageSetup object
Represents the page setup for the drawing documents.
DraftingSettingAtt object
Manages drafting settings.
DrawingArrow object
Represents a drawing arrow in a drawing view.
DrawingArrows object
A collection of all the drawing arrows currently managed by a drawing view of drawing sheet in a drawing document.
DrawingComponent object
Represents a drawing component instance (ditto) in a drawing view.
DrawingComponents object
A collection of all the drawing components (ditto) currently managed by a drawing view of drawing sheet in a drawing document.
DrawingDimExtLine object
Manages extension lines of a dimension in drawing view.
DrawingDimLine object
Manages dimension line of a dimension in drawing view.
DrawingDimValue object
Manages dimension value of a dimension in drawing view.
DrawingDimension object
Represents a drawing dimension in a Drawing view.
DrawingDimensions object
A collection of all the drawing dimensions currently managed by a drawing view of drawing sheet in a drawing document.
DrawingDocument object
Represents the Document object for drawings.
DrawingLeader object
Represents a drawing leader in a drawing view.
DrawingLeaders object
A collection of all the drawing leaders currently managed by a drawing view of drawing sheet in a drawing document.
DrawingPageSetup object
Represents the page setup for the drawing documents.
DrawingPicture object
Represents a drawing picture in a drawing view.
DrawingPictures object
A collection of all the drawing pictures currently managed by a drawing view of drawing sheet in a drawing document.
DrawingRoot object
Represents the drawing object in drawing documents.
DrawingSheet object
Represents a drawing sheet of the drawing document.
DrawingSheets object
A collection of all the drawing sheets currently managed by the drawing document.
DrawingTable object
Represents a drawing table in a drawing view.
DrawingTables object
A collection of all the drawing tables currently managed by a drawing view of drawing sheet in a drawing document.
DrawingText object
Represents a drawing text in a drawing view.
DrawingTextProperties object
Represents the properties of a drawing text in a drawing view.
DrawingTextRange object
Represents a drawing text range, or contiguous area, in a drawing text.
DrawingTexts object
A collection of all the drawing texts currently managed by a drawing view of drawing sheet in a drawing document.
DrawingThread object
Represents a drawing thread in a drawing view.
DrawingThreads object
A collection of all the drawing threads currently managed by a drawing view of drawing sheet in a drawing document.
DrawingView object
Represents a drawing view in a drawing sheet.
DrawingViewGenerativeBehavior object
Represents the generative behavior of a drawing view.
DrawingViewGenerativeLinks object
Represents the generative links of a drawing view.
DrawingViews object
A collection of all the drawing views currently managed by a drawing sheet in a drawing document.
DrawingWelding object
Represents a drawing welding in a drawing view.
DrawingWeldings object
A collection of all the drawing weldings currently managed by a drawing view of drawing sheet in a drawing document.
DressUpShape object
Represents the shapes built with other shape sub-elements such as faces or edges.
Dressup object
Interface to access the Dressup object.
Dressups object
A collection of all Dressup entities currently managed by the application.
DynLicenseSettingAtt object
Interface to handle the dynamic licensing settings.

E

E5Property object
Interface to access object properties.
EHMInsertionActPlugMapViewData object
Interface to access Plug Map view data associated to an Insertion activity.
EHSUpdateSmoothnessFactor object
Interface representing xxx.
EKPServices object
Interface to assign and remove Engineering Requirements to and from an activity.
Edge object
1-D boundary.
EdgeFillet object
Represents the edges-based fillet shape.
ElecSchWire object
For technical electrical wire attributes.
ElecSchematicObject object
Represents the electrical schematic objects.
Ellipse2D object
Class defining an ellipse in 2D Space.
EnumParam object
Represents the enum parameter.
EnvelopCondition object
Interface for accessing Envelop Condition modifier on a TPS.
ErrorlogStatisticsSettingAtt object
Interface for Errorlog statistic Controler.
ExpertCheck object
Represents the edition part of a check.
ExpertCheckRuntime object
Runtime part of a check.
ExpertReportObject object
Represents the ExpertReportObject object.
ExpertReportObjects object
Represents the collection of (succeeded or failed) report objects.
ExpertRule object
Represents the edition part of a rule.
ExpertRuleBase object
Represents the RuleBase object that can be edited.
ExpertRuleBaseComponentRuntime object
Represents a rule base component in a ruleset.
ExpertRuleBaseComponentRuntimes object
Represents the collection of ExpertRuleBase (ExpertChecks, ExpertRules, and ExpertRuleSets) components.
ExpertRuleBaseRuntime object
Represents the Runtime part of the RuleBase.
ExpertRuleRuntime object
Represents the ExpertRuleRuntime object.
ExpertRuleSet object
Represents the ExpertRuleSet object which is the editable part of a RuleSet or a RuleBase.
ExpertRuleSetRuntime object
Represents the ExpertRuleSet object in the RelationSet.
Export3DXmlSettingAtt object
Represents a setting controller for the 3D XML export settings.

F

FASReportingSettingAtt object
The interface to access a DNBIAFASReportingSettingAtt.
FTAInfraSettingAtt object
Represents the FT&A (Functional Tolerancing & Annotation) infrastructure setting controller object.
FTASettingAtt object
The interface to access a CATIAFTASettingAtt.
Face object
2-D boundary.
FaceFillet object
Represents the face fillet shape.
Factory object
Abstract object gathering behaviours of all objects being a factory.
Factory2D object
Interface to the factory for 2D objects.
Fastener object
Interface DELMIAFastener DELMIAFastener represent body in white fasteners of both types point and curve.
FastenerGroup object
FastenerSet object
Interface DELMIAFasteners DELMIAFasteners represent collection of fasteners of both types point and curve.
FastenerWorkBench object
Interface DELMIAFastenerWorkBench It is a utility class to get fasteners and groups from document.
FeatureGenerator object
The interface to access a CATIAFeatureGenerator.
File object
Represents the file object.
FileAccessStatisticsSettingAtt object
Interface for FileAccess statistic Controler
Role: the FileAccess statistics controler manages the values of all or only a part of the attributes available for the thematic.
FileComponent object
Represents the file object.
FileSystem object
Represents the file system object.
Files object
A collection of all the file objects in a folder.
Fillet object
Represents the fillet shape.
FittingSettingAtt object
Interface to handle parameters of DMU Fitting Tools Options Tab page Role: This interface is implemented by a component which represents the controller of DMU Fitting Tools Options parameter settings.
FixTogether object
The object that manages a sequence of products or fixTogethers.
FixTogethers object
A collection of all the FixTogether objects contained in the product.
FlagNote object
Interface for the TPS Flag Note object.
Folder object
Represents the folder object.
Folders object
The folders object belongs to a folder.
Formula object
Represents the formula relation.
FreeParameter object
Interface to access a CATIAFreeParameter.
FreeParameters object
Interface to access a CATIAFreeParameters.
FreeSpace object
FreeSpaces object
Interface to compute Free Spaces.
FreeState object
Interface for accessing Free State modifier on a TPS.
FunctActionsGroup object
The interface to access a group of functional actions in a system.
FunctActionsGroups object
The interface to access the groups of functional actions in a system.
FunctAssociation object
The interface to access a Functional Association.
FunctAssociations object
The interface to access a set of Functional Associations.
FunctFacetManagers object
Represents the Functional Facet's Managers.
FunctGenScriptMgr object
The interface to access a Functional GenerativeScripts manager.
FunctMultiRepMgr object
The interface to access a Functional Multi-Rep manager.
FunctNodeGraphLayout object
Represents a CATIAFunctNodeGraphLayout.
FunctScript object
The interface to access a Functional Script.
FunctScripts object
The interface to access a set of Functional Scripts.
FunctionalAction object
The interface to access a Functional Action.
FunctionalActions object
The interface to access a collection of FunctionalActions.
FunctionalDescription object
The interface to access a Functional Description.
FunctionalDocument object
Represents a Functional Document.
FunctionalElement object
Represents a Functional Element.
FunctionalFacet object
The interface to access a Functional Facet.
FunctionalFacetMgr object
The interface to access a Functional Facet Manager.
FunctionalObject object
The interface to access a Functional Object.
FunctionalObjectProxy object
The interface to access a Functional ObjectProxy.
FunctionalObjects object
Interface to access a collection of FunctionalObjects.
FunctionalPosition object
Represents a Functional Position.
FunctionalSystemSettingAtt object
Enables attribute access to PFD options.
FunctionalVariant object
The interface to access a Functional Variant.
FunctionalVariants object
The interface to access a collection of FunctionalVariants.

G

GeneralSessionSettingAtt object
Setting controller for the General property tab page.
GeneralStatisticsSettingAtt object
Interface for General statistic Controler.
GenericAccuracyProfile object
Interface to manage Generic Accuracy Profile of Robot controller.
GenericAction object
Interface representing a GenericAction.
GenericActionFactory object
Interface representing GenericAction factory.
GenericMotionProfile object
Interface to manage Generic Motion Profile of Robot controller.
GenericObjFrameProfile object
Interface to manage Generic Object frame Profile of Robot controller.
GenericToolProfile object
Interface to manage Generic Tool Profile of Robot controller.
GeometricElement object
2D or 3D wireframe geometric element.
GeometricElements object
A collection of all geometric elements contained in a part or a sketch.
Geometry2D object
2D wireframe geometric element.
GlobalStatisticsSettingAtt object
Interface for Global statistic Controler
Role: the global statistics controler manages the values of all or only a part of the attributes available for all the statistics thematics.
GrabAct object
Interface representing a Grab activity.
Groove object
Represents the groove shape.
Group object
Represents a DMU group.
Groups object
A collection of all groups currently managed by the application.

H

Hole object
Hole Feature in Part Design.
HomePosition object
Interface representing a device's Home Position.
HtsCCPSettingAtt object
HtsGeneralSettingAtt object
HtsJointSpeedSettingsAtt object
Interface representing xxx.
HtsTaskDisplaySettingAtt object
HumanActivityGroup object
Interface representing xxx.
HumanActivityGroupFactory object
The object that represents the Human Activity Group Factory.
HumanActsFactory object
The object that represents the Human Activity Factory.
HumanCallTask object
Interface representing xxx.
HumanProgram object
The object that represents program-node of Worker.
HumanTask object
HumanTaskList object
HybridBodies object
A collection of the HybridBody objects.
HybridBody object
The object is a hybrid body.
HybridShape object
Represents the hybrid shape object.
HybridShape3DCurveOffset object
Represents the hybrid shape 3DCurve Offset operation feature.
HybridShapeAffinity object
Represents the hybrid shape affinity feature object.
HybridShapeAssemble object
Represents the hybrid shape assemble feature object.
HybridShapeAxisLine object
Represents the hybrid shape axis line feature object.
HybridShapeAxisToAxis object
Represents the hybrid shape axis to axis tranformation feature object.
HybridShapeBlend object
Represents the hybrid shape blended surface object.
HybridShapeBoundary object
Represents the hybrid shape boundary feature object.
HybridShapeBump object
The Bump feature : an Bump is made up of a body to process and some Bump parameters.
HybridShapeCircle object
Represents the hybrid shape circle object.
HybridShapeCircle2PointsRad object
Represents the hybrid shape circle object defined using two points and a radius.
HybridShapeCircle3Points object
Represents the hybrid shape circle object defined using three points.
HybridShapeCircleBitangentPoint object
Represents the hybrid shape circle object defined using a point and tangent to two curves.
HybridShapeCircleBitangentRadius object
Represents the hybrid shape circle object defined using a radius and tangent to two curves.
HybridShapeCircleCenterAxis object
Represents the hybrid shape circle object defined using a point and axis/line.
HybridShapeCircleCenterTangent object
Represents the hybrid shape circle object defined using a center, a curve and a support.
HybridShapeCircleCtrPt object
Represents the hybrid shape circle object defined using a center and a point on the circle.
HybridShapeCircleCtrRad object
Represents the hybrid shape circle object defined using a center and a radius.
HybridShapeCircleExplicit object
Represents the hybrid shape circle object explicitely defined.
HybridShapeCircleTritangent object
Represents the hybrid shape circle object tangent to three curves.
HybridShapeCombine object
Represents the hybrid shape combined curve object.
HybridShapeConic object
Represents the hybrid shape conic object.
HybridShapeConnect object
Represents the hybrid shape connect curve object.
HybridShapeCorner object
Represents the hybrid shape corner feature.
HybridShapeCurveExplicit object
Represents the hybrid shape Curve explicit feature object.
HybridShapeCurvePar object
Represents the hybrid shape curve parameter object.
HybridShapeCurveSmooth object
Represents the hybrid shape curve smoothing operation feature.
HybridShapeCylinder object
Represents the hybrid shape Cylinder feature object.
HybridShapeDevelop object
Represents the hybrid shape develop feature object.
HybridShapeDirection object
Represents the hybrid shape direction feature object.
HybridShapeExtract object
Represents the hybrid shape extract feature object.
HybridShapeExtractMulti object
Represents the hybrid shape ExtractMulti feature object.
HybridShapeExtrapol object
Represents the hybrid shape extrapolation feature object.
HybridShapeExtremum object
Represents the hybrid shape extremum feature object.
HybridShapeExtremumPolar object
Represents the hybrid shape extremum polar feature.
HybridShapeExtrude object
The Extrude feature : an Extrude is made up of a face to process and one Extrude parameter.
HybridShapeFactory object
Interface to create all kinds of HybridShape objects that may be needed in wireframe and surface design.
HybridShapeFill object
The Fill feature : an Fill is made up of a face to process and one Fill parameter.
HybridShapeFilletBiTangent object
Fillet Bi-Tangent feature.
HybridShapeFilletTriTangent object
Fillet Tri-Tangent feature.
HybridShapeHealing object
Represents the hybrid shape healing feature object.
HybridShapeHelix object
Represents the hybrid shape helix feature object.
HybridShapeInstance object
The interface to access a CATIAHybridShapeInstance.
HybridShapeIntegratedLaw object
Represents the hybrid shape "integrated" law feature object.
HybridShapeIntersection object
Represents the hybrid shape intersection feature object.
HybridShapeInverse object
The Inverse feature : an Inverse is made up of a face to process and one Inverse parameter.
HybridShapeLawDistProj object
Interface to law feature.
HybridShapeLineAngle object
Line defined from a reference curve, a plane or a surface, a point and an angle.
HybridShapeLineBiTangent object
Line tangent to a curve.
HybridShapeLineBisecting object
Represents the hybrid shape bisecting line feature object.
HybridShapeLineExplicit object
Represents the hybrid shape line explicit feature object.
HybridShapeLineNormal object
Line defined by a point and a direction normal to a surface.
HybridShapeLinePtDir object
Line defined by a point and a direction.
HybridShapeLinePtPt object
Represents the hybrid shape line between two points feature object.
HybridShapeLineTangency object
Line tangent to a curve.
HybridShapeLoft object
Represents the hybrid shape loft surface feature object.
HybridShapeNear object
The Near feature : an Near is made up of a face to process and one Near parameter.
HybridShapeOffset object
Represents the hybrid shape offset feature object.
HybridShapePlane1Curve object
plane through a curve.
HybridShapePlane1Line1Pt object
Represents plane feature defined by a line and a point.
HybridShapePlane2Lines object
plane defined by two lines.
HybridShapePlane3Points object
Represents the hybrid shape plane through three points feature object.
HybridShapePlaneAngle object
Represents the hybrid shape plane angle feature object.
HybridShapePlaneEquation object
Plane define by an equation plane.
HybridShapePlaneExplicit object
Represents the hybrid shape Plane explicit feature object.
HybridShapePlaneMean object
Represents the hybrid shape mean plane feature object.
HybridShapePlaneNormal object
Normal plane.
HybridShapePlaneOffset object
Offset plane.
HybridShapePlaneOffsetPt object
Offset plane with point reference.
HybridShapePlaneTangent object
Tangency plane.
HybridShapePointBetween object
Represents the hybrid shape PointBetween feature object.
HybridShapePointCenter object
Represents the hybrid shape PointCenter feature object.
HybridShapePointCoord object
Point defined by coordinates.
HybridShapePointExplicit object
Represents the hybrid shape point explicit feature object.
HybridShapePointOnCurve object
Represents the hybrid shape point on a curve.
HybridShapePointOnPlane object
Point on a plane.
HybridShapePointOnSurface object
Represents the Point on Surface feature objects.
HybridShapePointTangent object
Point Tangent.
HybridShapePolyline object
Represents the hybrid shape polyline curve object.
HybridShapePositionTransfo object
Represents the hybrid shape position transformation feature object.
HybridShapeProject object
Represents the hybrid shape project feature object.
HybridShapeReflectLine object
Represents the hybrid shape reflect line feature object.
HybridShapeRevol object
The Revol feature : an Revol is made up of a face to process and one Revol parameter.
HybridShapeRotate object
Represents the hybrid shape rotate feature object.
HybridShapeScaling object
Represents the hybrid shape scaling feature object.
HybridShapeSection object
Interface to hybrid shape section feature.
HybridShapeSphere object
Represents the hybrid shape sphere feature object.
HybridShapeSpine object
Represents the hybrid spine curve feature object.
HybridShapeSpiral object
Represents the hybrid shape Spiral feature object.
HybridShapeSpline object
Represents the hybrid shape spline feature object.
HybridShapeSplit object
Represents the hybrid shape split feature object.
HybridShapeSurfaceExplicit object
Represents the hybrid shape Surface explicit feature object.
HybridShapeSweep object
Represents the hybrid shape Sweep feature object.
HybridShapeSweepCircle object
Represents the hybrid shape sweep circle feature object.
HybridShapeSweepConic object
Represents the hybrid shape conic sweep feature.
HybridShapeSweepExplicit object
Represents the hybrid shape Sweep explicit feature object.
HybridShapeSweepLine object
Represents the sweep line object.
HybridShapeSymmetry object
Represents the hybrid shape symmetry feature object.
HybridShapeThickness object
Represents the hybrid shape Thickness feature object.
HybridShapeTransfer object
Represents the hybrid shape Transfer feature object.
HybridShapeTranslate object
Represents the hybrid shape translate feature object.
HybridShapeTrim object
Represents the hybrid shape trim object.
HybridShapeUnfold object
Represents the hybrid shape Unfold feature object.
HybridShapeVolumeExplicit object
Represents the hybrid shape Volume explicit feature object.
HybridShapeWrapCurve object
Represents the hybrid shape wrap curve surface object.
HybridShapeWrapSurface object
Represents the hybrid shape wrap surface object.
HybridShapes object
The collection of the HybridShapes making up a body.
Hyperbola2D object
Class defining an hyperbola in 2D Space.
Hyperlink object
Represents a hyperlink marker.
Hyperlinks object

I

IDispatch object
Base interface for all Automation interfaces.
IPDTemplateProperty object
Interface to access template object (being pointed by the given V5 object) properties.
IUnknown object
Base interface for all interfaces.
IgesSettingAtt object
Represents the CATIA IGES setting controller object.
IgpOlpSettingAtt object
Represents the Offline Programming setting controller object.
ImportD5SettingAtt object
Interface to handle parameters of General-Compatibility-DELMIA D5 Tools Options Tab page.
Inertia object
Represents the Inertia object.
Inertias object
A collection of all inertia objects currently managed by the application.
InstanceFactory object
Represents the CATIAInstanceFactory.
IntParam object
Represents the integer parameter.
InteropSettingAtt object
Represents the object to handle the setting parameters of the "V4 Data Reading" tab page.
Intersect object
Represents the intersect boolean operation.
Item object
The object that represents an item.
Items object
The collection of items related to the current activity.

J

Joint object
Interface to manage the Joint object.
Joints object
A collection of all Joint entities currently managed by the application.

K

KinematicsWorkbench object
Interface to access all Kinematics entities.
KnowledgeActivateObject object
Interface to access a CATIAKnowledgeActivableObject.
KnowledgeObject object
Interface to access a CATIAKnowledgeObject.
KnowledgeSheetSettingAtt object
The interface to access a CATIAKnowledgeSheetSettingAtt.

L

LanguageSheetSettingAtt object
The interface to access a CATIALanguageSheetSettingAtt.
Law object
Represents the Law object.
Layout2DFactory object
Layout2DRoot object
Interface to manage the 2D Layout root.
Layout2DSettingAtt object
The interface to access a CATIA2DLSettingAtt.
Layout2DSheet object
The interface to access a Layout2D Sheet.
Layout2DSheets object
A collection of all the Layout sheets 2DL currently managed by the LayoutRoot.
Layout2DView object
The interface to access a Layout2D View.
Layout2DViews object
Length object
Represents the length parameter.
LibTabSettingAtt object
LicenseSettingAtt object
Interface to handle the licensing settings.
LightSource object
Represents the light source.
LightSources object
A collection of all the LightSource objects.
Limit object
Represents the limit of a prism or a hole shape.
Line object
Represents the hybrid shape Line feature object.
Line2D object
Class defining a line in 2D Space.
LinearRepartition object
Represents the linear repartition.
List object
Represents a CATIAList.
ListParameter object
Represents a CATIAListParameter.
Loft object
Loft feature.
Loop object
The interface to access a CATIALoop.

M

MHILoadParameters object
Interface representing a means to set information that is needed for the load and also to retrieve this information on the loaded document.
MHIOpenAccess object
Interface representing a means to load data from the Hub into V5.
MHIRelationManagement object
MHISaveAccess object
Interface representing a means to (1) Save data to the Hub (2) Retrieve certain information on the loaded document

DNBIAMHISaveAccess is implemented on Document.

MachiningProcess object
MachiningProcess defines a set of properties and methods to apply a Machining Process to a geometrical feature (design or manufacturing).
MacrosSettingAtt object
Setting controller for the Macros tab page.
ManipSettingAtt object
Interface to handle parameters of DMU Manip Tools Options Tab page Role: This interface is implemented by a component which represents the controller of DMU Manip Tools Options parameter settings.
ManufacturingAPTGenerator object
Generator of APT output machining code.
ManufacturingActivity object
ManufacturingActivity defines a set of methods and mainly adds some specific methods and services in Manufacturing on ProcessPlan Activities.
ManufacturingCopyTransformation object
Interface representing the Manufacturing Copy Transformation object.
ManufacturingFeature object
ManufacturingFeature defines a set of methods to access a Manufacturing Feature.
ManufacturingFeatures object
Collection of Manufacturing Features.
ManufacturingGeneratorData object
Represents the manufacturing output stream object.
ManufacturingHole object
Hole Feature in Machining domain.
ManufacturingInsert object
The interface to access a CATIAManufacturingInsert.
ManufacturingMachinableArea object
Machinable Area in Manufacturing.
ManufacturingMachinableFeature object
Machinable Feature in Manufacturing.
ManufacturingMachinableGeometry object
Represents the machinable geometry object.
ManufacturingMachine object
Machine in machining domain.
ManufacturingMachiningAxis object
ManufacturingMachiningAxis defines a set of methods to manage a Machining Axis System or an Origin.
ManufacturingOperation object
ManufacturingOperation defines a set of methods.
ManufacturingOutput object
Object that represents the output machining code.
ManufacturingOutputGenerator object
Father object to generate output machining code.
ManufacturingPattern object
The Manufacturing Pattern is a specialized feature used to machine the same item several times at several positions.
ManufacturingPrecedence object
Defines a precedence relation between objects.
ManufacturingPrecedences object
Interface that manage the precedences for an object of type @ CATIAManufacturingActivity.
ManufacturingPrismaticMachiningArea object
ManufacturingPrismaticMachiningArea defines a set of properties and methods.
ManufacturingProcess object
A ManufacturingProcess for a Manufacturing Document.
ManufacturingProgram object
A ManufacturingProgram for a Manufacturing Document.
ManufacturingSetup object
A ManufacturingSetup for a Manufacturing Document.
ManufacturingSurfaceGeomArea object
Represents the Manufacturing Surface NCGeometry.
ManufacturingSurfaceMachiningArea object
Represents the Manufacturing Surface Machining Area.
ManufacturingTool object
A ManufacturingTool for a Manufacturing Document.
ManufacturingToolAssembly object
Represents the tool assembly.
ManufacturingToolCorrector object
Manufacturing tool corrector.
ManufacturingToolMotion object
A ManufacturingToolMotion for a Manufacturing Document.
ManufacturingView object
The Manufacturing View is the object that holds all the manufacturing features of the model.
Marker2D object
Represents a marker 2D in a specified annotated view.
Marker2Ds object
A collection of Marker2Ds objects.
Marker3D object
Represents a marker 3D.
Marker3Ds object
A collection of Marker3D objects.
MarkerSettingAtt object
Interface to handle the Marker settings

The different settings are:

MarkerAutoUpdate
Update on product structure modifications and scenes activation.
Material object
Represents a Material object.
MaterialCondition object
Interface for accessing Material Condition modifier on a TPS.
MaterialDocument object
Represents the Document object for materials.
MaterialESSObjectSettingAtt object
The interface to access a CATIAMaterialESSObjectSettingAtt.
MaterialFamilies object
A collection of all the MaterialFamily objects.
MaterialFamily object
Represents a Material Family object.
MaterialManager object
Interface to manage material manager object.
Materials object
A collection of all the Material objects.
Measurable object
The interface to access a CATIAMeasurable Get measurements on the object.
MeasureSettingAtt object
The interface to access a CATIAMeasureSettingAtt.
Mechanism object
Interface to access the Mechanism object.
MechanismCommand object
Interface to access the Command object (in Kinematics context).
MechanismCommands object
A collection of all MechanismCommand entities currently managed by the application.
Mechanisms object
A collection of all Mechanism entities currently managed by the application.
MemoryWarningSettingAtt object
Represents the base object to handle the parameters of memory warning mechanism.
Merges object
MfgActivities object
The collection of MfgActivities related to the Manufacturing Document .
MfgAssembly object
This Interface represents a Manufacturing Assembly.
MfgAssemblyFactory object
Represents the factory to creates a manufacturing assembly.
MfgHubSettingAtt object
Represents the Manufacturing Hub setting controller object.
MfgToolMotions object
The collection of MfgToolMotions related to the Manufacturing Document .
MigrBatchSettingAtt object
Represents the object to handle the setting parameters of the "Migration Batch" tab page.
Mirror object
Represents the mirror shape.
MonoDimFeatEdge object
1-D boundary belonging to a feature whose topological result is one dimensional.
MountActivity object
Interface representing a Mount Activity.
MountManager object
Represents the Mount Manger of a Robot.
Move object
Represents an object associated with any kind of objects which retrieves the corresponding movable object.
MoveActionActivity object
Interface representing a Move Activity inside a generic Action (Close Gun/Open Gun etc).
MoveHomeAct object
Interface representing a MoveHomeAct.
MoveJointsAct object
Interface representing a MoveJointsAct.
MoveToPostureActivity object
The object that represents an MoveToPosture(MTP) Activity.
MultiCADSettingAtt object

N

N4DNavigatorSettingAtt object
Interface to handle the settings of the DMU Navigator workbench.
NavigatorWorkbench object
The object to manage all DMU Navigator entities.
Noa object
Interface for the TPS Noa object.
NonSemanticDatum object
NonSemanticGDT object
NotWireBoundaryMonoDimFeatVertex object
0-D boundary belonging to a feature whose topological result is one dimensional, the boundary not beeing the extremity of the feature.

O

OLPTranslator object
Represents the Offline Programming Translator object.
Operation object
Represents an Operation.
OperationProfile object
Represents an Operation.
Optimization object
Represents an Optimization object.
OptimizationConstraint object
Represents an optimization constraint.
OptimizationConstraints object
Represents a collection of Optimization Constraint.
Optimizations object
Represents a collection of optimization features.
OptimizerWorkBench object
OrderGenerator object
Interface representing Create Shop Order APIs which generates Shop Order Instance(SOI), against user-given option(s).
OrderedGeometricalSet object
The object is an ordered geometrical set.
OrderedGeometricalSets object
A collection of the OrderedGeometricalSet objects.
OriginElements object
Represents the part's 3D reference axis system.
Outputs object
The collection of outputs related to the current activity.

P

PCBArea object
PCBBoard object
PCBComponent object
PCBHoleAndPattern object
PCBObject object
PCBWorkbench object
Interface to access Circuit Board Design workbench object.
PCSStatisticsSettingAtt object
Interface for PCS statistic Controler
Role: the PCS statistics controler manages the values of all or only a part of the attributes available for the thematic.
PPRActivity object
The interface is used to retrieve the items and resources of the current Activity.
PPRDocument object
This interface is used to access Processes, Products and Resources.
PPRProducts object
This interface is used to retrieve and add Products from and to the list of Products.
Pad object
Represents the pad shape.
PageSetup object
Represents the page setup.
Parabola2D object
Class defining an parabola in 2D Space.
Parameter object
Represents the parameter.
ParameterProfiles object
Interface to manage an user-defined applicative parameter profile.
ParameterProfilesFactory object
Interface to manage an user-defined applicative parameter profile(s) defined on a robot controller.
ParameterSet object
Represents parameter set.
ParameterSets object
Represents a collection of parameter sets.
Parameters object
Represents the Parameters collection of the part or the product.
Part object
The root level object inside a PartDocument object.
PartComp object
PartComps object
PartDocument object
Represents the Document object for parts.
PartInfrastructureSettingAtt object
Setting controller for all the Part Infrastructure property tab pages.
ParticularTolElem object
Interface for accessing particular geometry of the toleranced element.
PathESSRessourcesSettingAtt object
The interface to access a CATIAPathESSRessourcesSettingAtt.
Pattern object
Represents the pattern shape.
PertNode object
This Interface represents a PertNode in the PERT Chart.
PickActivity object
The object that represents an PickActivity.
PlaceActivity object
The object that represents an PlaceActivity.
PlanarFace object
2-D boundary with a planar geometry.
Plane object
Represents the hybrid shape Plane feature object.
PlugMapViewSettingAtt object
Interface representing xxx.
Pocket object
Represents the pocket shape.
Point object
Represents the hybrid shape Point feature object.
Point2D object
Class defining a point in 2D Space.
PointFastener object
Interface DELMIAPointFastener DELMIAPointFastener represent body in white fasteners of type point.
Position object
Represents the position object.
PositionedMaterial object
Represents a Positioned Material object.
PrintArea object
Manages print area of drawing sheet.
Printer object
Represents a printer handled by the printing subsystem.
Printers object
A collection of all the Printer objects managed by the application.
PrintersSettingAtt object
Represents a setting controller for the printer settings.
Prism object
Prism-based features in Part Design : base for pad or pocket.
ProcessDocument object
This interface is used to access the PPRDocument and to add a new library.
Product object
Represents the product.
ProductDocument object
Represents the Document object for product structures.
ProductScene object
Represent the Product-Scene.
ProductScenes object
A collection of ProductScenes contained in a given ProductDocument.
Products object
The collection of the Product objects contained in a given Product object of a ProductDocument object.
ProjectedToleranceZone object
Interface for accessing projected tolerance zone informations of a TPS.
PspAppFactory object
Represents the application factory.
PspApplication object
Represents an application.
PspAttribute object
Represents Attribute Interface to query Plant Ship objects' attributes.
PspAttributeReport object
Represents the Attribute Report.
PspBuildPart object
Represents Interface to create and modify a part.
PspClass object
Represent Interface to list the start up object classes of an application.
PspCntrFlow object
Represents Interface to manage Connector Flow property.
PspConnectable object
Represents an Interface to manage object behaviors in making connections.
PspConnector object
Represents connector object.
PspFunctional object
Represents Plant Ship functional object.
PspGroup object
Represent the Group.
PspGroupable object
Represent the Groupable object that can be grouped by Group object.
PspID object
Represents the interface to generate and set IDs for the Distributive System Objects.
PspLightBend object
Represents the Light bendable object.
PspLightConnector object
Represents the light connector.
PspLightPart object
Represents the light part.
PspListOfBSTRs object
Represents a collection of CATBSTR type of strings.
PspListOfDoubles object
Represents a collection of double values.
PspListOfLongs object
Represents a collection of Long values.
PspListOfObjects object
Represents a collection of Objects.
PspLogicalLine object
Represents the logical line.
PspObject object
Represents PspObject.
PspPartConnector object
Represent the Part Connector to manage the technological data on connectors.
PspPhsyicalProduct object
Represents the interface to manage the technological connectors on physical objects.
PspPhysical object
Represents the object to access Plant Ship physical object information.
PspPlacePart object
Represents the Place physical parts object.
PspResource object
Represents the PspResource.
PspSpatial object
Represents the Psp Spatial object.
PspStretchableData object
Represents the PspStretchableData object.
PspTempListFactory object
Create temporary (non-persistent) lists to be used in VB environment.
PspWorkbench object
Represents the PspWorkbench.
Publication object
The interface to access a CATIAPublication.
Publications object
The collection of the Product publications.

R

RRSSettingAtt object
Interface to handle parameters of IGRIP RRS Tools Options Tab page Role: This interface is implemented by a component which represents the controller of IGRIP RRS Tools Options parameter settings.
RealParam object
Represents the real parameter.
RectPattern object
Represents the rectangular pattern.
RectilinearBiDimFeatEdge object
1-D boundary belonging to a feature whose topological result is two dimensional, the boundary having a rectilinear geometry.
RectilinearMonoDimFeatEdge object
1-D boundary belonging to a feature whose topological result is one dimensional, the boundary having a rectilinear geometry.
RectilinearTriDimFeatEdge object
1-D boundary belonging to a feature whose topological result is three dimensional, the boundary having a rectilinear geometry.
Reference object
Represents an object pointing to another object.
ReferenceFrame object
Interface designed to manage reference frame associated to a TPS.
References object
A collection of all the references aggregated in an object.
Relation object
Represents the relation object.
Relations object
Represents the collection of relations of the part or the product.
ReleaseAct object
Interface representing a Release activity.
Remove object
Represents the remove, or substract boolean operation.
RemoveFace object
Represents the Remove Face operation.
RenderingEnvironment object
Represents a Environment object.
RenderingEnvironmentWall object
Represents a Environment object.
RenderingEnvironments object
A collection of all the Rendering Environments objects.
RenderingLight object
Represents a Rendering Light object.
RenderingLights object
A collection of all the Rendering Lights objects.
RenderingMaterial object
Represents an RenderingMaterial object.
RenderingSettingAtt object
The interface to access a CATIARenderingSettingAtt.
RenderingShooting object
Represents a Material object.
RenderingShootings object
A collection of all the Rendering Shootings objects.
Repartition object
Represents the repartition.
ReplaceFace object
Represents the Replace Face operation.
Replay object
ReportGenerationSheetSettingAtt object
The interface to access a CATIAReportGenerationSheetSettingAtt.
Resource object
The object that represents a resource.
ResourceCollection object
Interface representing collection of Resources.
ResourceProgramManager object
Represents the Resource Program manager of a resource.
Resources object
The collection of resources related to the current activity.
Revolution object
Represents the revolution-based shapes.
Rib object
Represents the rib shape.
RobAnalysisHeartBeatUsageSettingAtt object
Interface to handle the parameter used to set as an option, to either enable or disable robot heart beat rate while motion planning, in the Infrastructure-DELMIA Infrastructure-Robot Analysis Tools Options Tab page.
RobAnalysisSettingAtt object
Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Robot Analysis Tools Options Tab page.
RobControllerFactory object
Interface to manipulate Robot Controller.
RobGenericController object
RobotMotion object
Represents a Robot Motion.
RobotTask object
Represents the Robot Task.
RobotTaskFactory object
Represents the Task Creation Factory for Robots.
Rotate object
Represents the shape rotate feature object.
Roughness object
Interface to manage Roughness TPS.
RpmReport object
Rule object
Represents the program relation.

S

SPAWorkbench object
The object to manage all Space Analysis objects.
SWKIKConstraint object
This interface manages the constraint of the manikin.
SWKManikin object
This interface groups the methods directly related to the definition of a manikin.
SWKManikinPart object
This interface represents any part of the manikin that is persistent.
Sampled object
The interface to access a CATIASampled based object.
Sampleds object
The collection of all the Sampled objects currently contained in the current document.
SampledsNode object
The interface to access a CATIASampledsNode.
Scaling object
Represents the scaling shape.
Scaling2 object
Represents the Scaling2 feature object.
Scene object
Represent the scene.
SceneProductData object
The interface to access a CATIASceneProduct

Using this prefered syntax will enable mkdoc to document your class.

SceneWorkbench object
Represent the access point to scenes management.
Scenes object
A collection of scenes contained in a given ProductDocument.
SchAnnotationBreak object
Manage an annotation break operations.
SchApp2DZoneFrom3DZone object
Manage a 2D zone that is dropped off from 3D counterpart.
SchAppClass object
Manage the class hierarchy of an application model.
SchAppCntrColor object
Manage graphical representation of schematic connector.
SchAppCntrData object
Manage a schematic connector data.
SchAppCntrDocLink object
Manage a schematic connector.
SchAppCntrFlow object
Manage the technical attributes of a schematic connector.
SchAppCntrName object
Manage a schematic connector.
SchAppCntrShow object
Manage graphical representation of schematic connector.
SchAppCompatible object
Provide application rules of how to connect objects.
SchAppComponent object
Represents an application component object.
SchAppConnectable object
Represents an application object that can be connected to others.
SchAppConnection object
Manage a schematic connection.
SchAppConnector object
Manage a schematic connector.
SchAppDeleteCheck object
Manage the deletion of a schematic object.
SchAppDeleteCheck2 object
Manage the deletion of a schematic object.
SchAppEnvironment object
Manage the application environment in a schematic session.
SchAppGapPriority object
Manage the graphical representation of a route.
SchAppGroup object
Manage application group.
SchAppModelInit object
Manage the initialization of application model.
SchAppMultiImage object
Interface to manage the image object in the Multi-Image-Object concept.
SchAppMultiImageMaster object
Interface to manage the master object in the Multi-Image-Object concept.
SchAppObjectFactory object
Application factory to create application objects.
SchAppObjectFactory2 object
Application factory to create application objects.
SchAppReplace object
Manage a schematic component.
SchAppRoute object
Manage a schematic route.
SchAppRoute2 object
Manage a schematic route.
SchAppScalingRule object
Provide application rule of how to scale schematic objects.
SchAppZone object
Manage a schematic zone.
SchArrowDisplay object
Manage the graphical representation of a schematic route.
SchBaseFactory object
Factory to create basic schematic objects.
SchBoundaryElem object
Manage a boundary element of a schematic zone.
SchCatalogComponent object
Manage a schematic component catalog.
SchCatalogRoute object
Manage a schematic route catalog.
SchCntrConnect object
Manage the a schematic connector.
SchCntrDocLink object
Manage the on-off sheet connector.
SchCntrGraphic object
Manage the graphical representation of a schematic connector.
SchCntrLocation object
Manage the location of a schematic connector.
SchCompConnector object
Manage the connectors of a schematic component.
SchCompFlow object
Manage the internal flow of a schematic component.
SchCompGraphic object
Manage the graphical representation of a schematic component.
SchCompGroupExt object
Manage the graphical representation of a temporary group of schematic objects.
SchCompatible object
Provides connecting rule to schematic objects.
SchComponent object
Manage a schematic component.
SchComponent2 object
Manage a schematic component.
SchComponentGroup object
Represents a temporary group of schematic objects for component placement.
SchConnectable object
Represents schematic objects that can be connected to others.
SchDropOffView object
Manage the drop off views in a schematic viewer.
SchFrameInfo object
Manage the background view of a schematic viewer.
SchGRR object
Manage the graphical representation of a schematic object.
SchGRRCntr object
Manage the graphical representation of a schematic connector.
SchGRRComp object
Manage the graphical representation of a schematic component.
SchGRRFactory object
Factory to create graphical representations of schematic objects.
SchGRRRoute object
Manage the graphical representations of a schematic route.
SchGRRRoute2 object
Manage the graphical representation of a schematic route.
SchGRRRouteAlternate object
Manage the graphical styles for alternative route graphics.
SchGRRRouteEllipse object
Manage the graphical representation of a schematic route.
SchGRRZone object
Manage the graphical representation of a schematic zone.
SchGapDisplay object
Manage the graphical representation of a schematic route.
SchInternalFlow object
Represents the internal flow object in a schematic component.
SchListOfBSTRs object
Represents a non-persistant list of character strings to be used with Schematic IDLs.
SchListOfDoubles object
Represents a list of DOUBLEs to be used with Schematic IDLs.
SchListOfLongs object
Represent a non-persistant list of LONGs to be used with schematic IDLs.
SchListOfObjects object
Represent a non-persistant list of schematic objects.
SchMovable object
Manage the transformation of a schematic component.
SchMovable2 object
Manage rotation of a schematic object.
SchNetworkAnalysis object
Represents a schematic network.
SchObsoleteModel object
Manage obsolete model elements.
SchPostReplace object
Manage post component replacement behaviors.
SchReplace object
Manage existing schematic component instances.
SchRoute object
Manage a schematic route data.
SchRouteAlternateGraphic object
Manage alternative graphical primitives of a schematic route.
SchRouteGraphic object
Manage graphical primitives representing a schematic route.
SchRouteSymbol object
Manage a symbol placed on a route.
SchSession object
Represents a schematic session.
SchTempListFactory object
Create temporary (non-persistent) lists to be used in VB environment.
SchUpdateInstances object
Interface to update all component instances when the catalog reference component has been changed.
SchWorkbench object
Represents a workbench on a schematic document.
SchZone object
Manage zone boundaries.
SchZoneGraphic object
Manage graphical representations of a schematic zone.
SchZoneMembership object
Manage zone memberships.
SchematicExtension object
Manage schematic extensions.
SchematicRoot object
Represents the top node of the schematic object tree.
SearchSettingAtt object
Represents the setting controller for the Search property tab page.
Section object
Represents the Section object.
SectioningSettingAtt object
The interface to access a CATIASectioningSettingAtt.
Sections object
A collection of all Section objects currently managed by the application.
SelectedElement object
Represents an element contained by a Selection object.
Selection object
Represents the selection.
SelectionSets object
Interface to manage the Selection Sets in a document.
SendToService object
This interface allows to use 'Send To' functionalities through an API.
ServerStatisticsSettingAtt object
Interface for Server statistic Controler
Role: the server statistics controler manages the values of all or only a part of the attributes available for the thematic.
SessionStatisticsSettingAtt object
Interface for Session statistic Controler
Role: the session statistics controler manages the values of all or only a part of the attributes available for the thematic.
SetOfEquation object
Represents the set of equations object.
SettingController object
Represents the base object for setting controllers.
SettingControllers object
A collection of all the setting controllers objects currently managed by the application.
SewSurface object
Represents the sewing operation.
Shaft object
Represents the shaft shape.
Shape object
Represents the Shape object.
ShapeFactory object
Represents the factory for shapes to create all kinds of shapes that may be needed for part design.
ShapeInstance object
The interface to access a CATIAShapeInstance.
Shapes object
The collection of the shapes making up a body.
Shell object
Represents the shell shape.
ShiftedProfileTolerance object
Interface for accessing shifted tolerance zone informations of a TPS.
Shot object
The interface to access a CATIAShot.
Shots object
The collection of all shot objects contained in the current sampled.
Shuttle object
The interface to access a CATIAShuttle.
Shuttles object
The interface to access a CATIAShuttles

Using this prefered syntax will enable mkdoc to document your class.

Silhouette object
Interface to access a CATIASilhouette.
Silhouettes object
Interface to compute Silhouettes.
SimTraceSettingAtt object
Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Simulation Trace Tools Options Tab page.
Simplifications object
Interface to compute Simplifications.
SimulationInitState object
Interface used to save/restore the simulation initial state.
SimulationSettingAtt object
Interface to handle parameters of DELMIA Simulation Tools Options Tab page Role: This interface is implemented by a component which represents the controller of Simulation Tools Options parameter settings.
Sketch object
The Sketch is a 2D based element comprising constrained 2D geometrical elements.
SketchBasedShape object
Represents the shapes based on sketched 2D geometry.
Sketches object
The body's collection of sketches not yet used by any shape.
Slot object
Represents the slot shape.
Solid object
Represents an imported solid object.
SolidCombine object
The interface to access a CATIASolidCombine.
SpecV4SettingAtt object
Represents the V4/V5 SPEC setting controller object.
SpecsAndGeomWindow object
Represents a window featuring a specification viewer and a geometry viewer.
SpecsViewer object
Represents the specification tree viewer.
Spline2D object
Class defining a spline in 2D Space.
Split object
Represents the split operation.
StepSettingAtt object
The interface to access a CATIAStepSettingAtt.
StiDBChildren object
Represents all the Children of a CATIAStiDBItem.
StiDBItem object
Represents the SmarTeam Integration Object, that is to say the Document coming from SmarTeam database.
StiEngine object
Represents the SmarTeam Integration Engine, that is to say the entry point to the CATIA/SmarTeam Integration.
Stiffener object
Represents the stiffener shape.
StrAnchorPoint object
Represents an anchor point.
StrAnchorPoints object
A collection of the anchor points of a section object.
StrComputeServices object
Represents a structure service object.
StrCutback object
Represents the cutback object.
StrFoundation object
Represents a structure foundation assembly.
StrFoundations object
A collection of the Foundation objects contained in a given Product object of a ProductDocument object.
StrMember object
Represents a member object.
StrMemberExtremity object
Represents an extremity of a member object.
StrMembers object
A collection of the Member objects contained in a given Product object of a ProductDocument object.
StrObject object
Represents a structure object.
StrObjectFactory object
Represents the factory object for all the structure objects.
StrParam object
Represents the string parameter.
StrPlate object
Represents a structure plate object.
StrPlates object
A collection of the Plate objects contained in a given Product object of a ProductDocument object.
StrSection object
Represents the section object.
StrWorkbench object
Represents the structure workbench object.
SurfaceBasedShape object
Represents the shapes based on Surface.
Sweep object
Represents the sweep shape.
SweptVolume object
SweptVolumes object
Interface to compute swept volumes.
Symmetry object
Represents the shape symmetry feature object.
SystemConfiguration object
Provides abstractions to resources which depend on the platform or the current configuration.
SystemService object
Represents an object which provides system services.

T

TCPTrace object
Interface representing a TCP trace.
TCPTraceActivity object
Interface representing TCPTraceActivity.
TCPTraceManager object
Interface representing an accessor to TCP traces object from a product.
TCPTraceManagerGraphics object
Interface used to modify the default graphical properties of TCP traces.
TPSView object
TPSViewFactory object
Represents the TPS view factory object.
TPSViews object
Interface for collection of TPS Views CATIATPSView.
Tag object
Interface representing a Tag.
TagFactory object
Interface representing Tag factory.
TagGroup object
Interface representing a TagGroup.
TagGroupFactory object
Interface representing TagGroup factory.
TangentPlane object
Interface for accessing Tangent Plane modifier on a TPS.
Task object
Represents the Task of a resource.
Text object
Interface for the TPS Text object.
TextStream object
The textstream object allows to manage input and output for a text stream.
ThickSurface object
Represents the ThickSurface feature.
Thickness object
Represents the thickness shape.
Thread object
Represents the Thread feature.
ThreeDCuts object
TolerancePerUnitBasisRestrictiveValue object
Interface for accessing tolerance per unit basis restrictive value on a TPS.
ToleranceSheetSettingAtt object
The interface to access a CATIAToleranceSheetSettingAtt.
ToleranceUnitBasisValue object
Interface for accessing values of the tolerance unit basis on a TPS.
ToleranceZone object
Interface for accessing tolerance zone informations of a TPS.
Track object
The interface to access a CATIATrack.
Tracks object
A collection of all the track objects contained in the current document.
TransformationShape object
Represents the shapes based on a transformation of another shape.
Translate object
Represents the hybrid shape translate feature object.
TreeTabSettingAtt object
TreeVizManipSettingAtt object
The Interface to retrieve and set the visual information on the specification tree.
TriDimFeatEdge object
1-D boundary belonging to a feature whose topological result is three dimensional.
TriDimFeatVertexOrBiDimFeatVertex object
0-D boundary belonging to a feature whose topological result is three dimensional or two dimentional.
Trim object
Represents the Trim, or union trim boolean operation.
TritangentFillet object
TypeESSObjectSettingAtt object
The interface to access a CATIATypeESSObjectSettingAtt.

U

Unit object
Represents CATIAUnit object.
Units object
Represents the collection of Units.
UnitsSheetSettingAtt object
The interface to access a CATIAUnitsSheetSettingAtt.
UnmountActivity object
Interface representing a Unmount Activity.
UserPattern object
Represents the user pattern.
UserRepartition object
Represents the User Pattern repartition.
UserSurface object
UserSurfaces object

V

V4MasterModel object
Represents the V4 Master Model.
V4V5SpaceSettingAtt object
Represents the object to handle the setting parameters of the "V4V5 Space" tab page.
V4WritingSettingAtt object
Represents the Saving As V4 Data setting controller object.
VarRadEdgeFillet object
Represents the edge fillet shape with a variable radius.
VerifTabSettingAtt object
Vertex object
0-D boundary.
VibrationVolumes object
ViewCharacteristicCurvesSettingAtt object
Represents the CATIA Sheet Metal Aerospace Display setting controller object.
Viewer object
Represents the viewer.
Viewer2D object
Represents a 2D viewer.
Viewer3D object
Represents a 3D viewer.
Viewers object
A collection of all the Viewer objects currently attached to a window.
Viewpoint2D object
Represents the 2D viewpoint.
Viewpoint3D object
Represents the 3D viewpoint.
VisPropertySet object
Represents the graphic properties for the current selection.
VisualizationSettingAtt object
The interface to access a CATIAVisualizationSettingAtt.
VrmlSettingAtt object
The interface to access a CATIAVrmlSettingAtt.

W

WIBuyOff object
WIChangeNotification object
WIDataCollection object
WIText object
WITextAccessEI object
WalkActivity object
Window object
Represents the window.
Windows object
A collection of all the Window objects currently managed by the application.
WorkGeneralSettingAtt object
Interface representing xxx.
Workbench object
Represents a workbench on a document.
WorkbenchStatisticsSettingAtt object
Interface for Workbench statistic Controler.
WorkerActivity object
The object that represents an Worker activity.
Wrapping object
Wrappings object

Z

ZeroDimFeatVertexOrWireBoundaryMonoDimFeatVertex object
0-D boundary beeing either an isolated point or the extremity of a feature whose topological result is one dimensional.

Copyright © 2003, Dassault Systèmes. All rights reserved.